nach oben

Arabian Journal for Science and Engineering

Erschienen in:

02.07.2021 | Research Article-Mechanical Engineering

Jib Vibration and Payload Swing of Tower Cranes in the Case of Trolley Motion

verfasst von: Runhui Feng, En Zhang, Mingxiao Dong

Erschienen in: Arabian Journal for Science and Engineering | Ausgabe 12/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Based on the assumptions that the tower and counter jib of the tower cranes are rigid bodies in the case of trolley motion, the jib of the tower cranes is taken as a cantilever beam. The tower crane is simplified as a payload–trolley–jib system. Furthermore, the lattice jib is equal to a solid beam and the trolley is reduced to a moving mass. The dynamic equations for the system are derived on the basis of Euler–Bernoulli beam theory and Lagrange’s equations. Finally, the influence of dynamic parameters such as the velocity and acceleration of the trolley motion, payload mass, cable length on jib vibration, and payload swing is studied by simulations and experiments.

Vorheriger Artikel Torsional Vibration for Rolling Mill with the Drive System Shaft Axis Deviations

Nächster Artikel Experimental Evaluation of a New Compact Design Multistage Water-Gap Membrane Distillation Desalination System

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Dong, Q., Xu, G.N., Ren, H.L.: Research on risk of remanufacturing telescopic job structure system under potential multi-failure mode correlation. J. Adv. Mech. Des. Syst. Manuf. 11(2), JAMDSM0028-JAMDSM0028 (2017)

Dong, Q.; Xu, G.N.; Ren, H.L.; Wang, A.H.: Fatigue remaining life estimation for remanufacturing truck crane Jib structure based on random load spectrum. Fatigue Fract. Eng. Mater. Struct. 40, 706–731 (2017)CrossRef

Zhechen, Z., Yingnan, P., Qi, Z., Changxin, Lu.: Event-triggered adaptive fuzzy control for stochastic nonlinear systems with unmeasured states and unknown backlash-like hysteresis. IEEE Trans. Fuzzy Syst. 1–19 (2020). https://doi.org/10.1109/TFUZZ.2020.2973950

Raul-Cristian, R., Radu-Emil, P., Petriu, E.M.: Hybrid data-driven fuzzy active disturbance rejection control for tower crane systems. European Journal of Control. 1–11 (2020). https://doi.org/10.1016/j.ejcon.2020.08.001

Xiang, Z., Xiao, Z., Wang, X., Huan, L.: Dynamic analysis of the main trolley frame in load-lifting system of casting crane. In: 2015 IEEE International Conference on Information and Automation, Linjiang. 1816–1820 (2015)

Andrej C., Eilif P., Olav E.: Dynamics of luffing motion of a flexible knuckle boom crane actuated by hydraulic cylinders. Mech. Mach. Theory. 143 (2019). https://doi.org/10.1016/j.mechmachtheory.2019.103616

Cao, F., Cui, M., Li, J.: Modal analysis and harmonic response analysis of crane arm of medium and small sized automobile crane. In: Proceedings of the 2018 3rd International Conference on Advances in Materials, Mechatronics and Civil Engineering. 164–168 (2018)

Hamit, K., Oktay, A.: Design of scaled down model of a tower crane mast by using similitude theory. Eng. Struct. 220 (2020). https://doi.org/10.1016/j.engstruct.2020.110985

Fryba, L.: Vibration of Solids and Structures Under Moving Loads. Telford, London (1999)CrossRef

10.

Zrnic, N.D.; Gasic, V.M.; Bosnjak, S.M.: Dynamic responses of a gantry crane system due to a moving body considered as moving oscillator. Arch. Civ. Mech. Eng. 15(2), 243–250 (2015)CrossRef

11.

Svedholm C., Zangeneh A., Pacoste C., François S., Karoumi R.: Vibration of damped uniform beams with general end conditions under moving loads. Eng. Struct. 126(Nov.1), 40–52 (2016)

12.

Xin Yunsheng, Xu.; Nina, G.S.; Qing, D.: Nonlinear vibration of ladle crane due to a moving trolley. Math. Probl. Eng. 4, 1–14 (2018)MathSciNet

13.

Wei, He.: Vertical dynamics of a single-span beam subjected to moving mass-suspended payload system with variable velocities. J. Sound Vib. 418, 36–54 (2018)CrossRef

14.

Yang, W.; Zhang, Z.; Shen, R.: Modeling of system dynamics of a slewing flexible beam with moving payload pendulum. Mech. Res. Commun. 34(3), 260–266 (2007)CrossRef

15.

Meirovitch, L.: Analytical Methods in Vibrations. Macmillan, New York (1967)MATH

16.

Wang J., Lu N., Luo B.: Equivalent inertia moment method to stability analyze of lattice type beam. 3rd International Conference on Steel and Composite Structures, ICSCS07-Steel and Composite Structures. 311–315 (2007)

17.

Standardization administration of The People’s Republic Of China: Design Rules for Cranes (GB/T 3811–2008). Standards press of China, Beijing (2008)

18.

Weaver, W., Jr.; Timoshenko, S.P.; Young, D.H.: Vibration Problems in Engineering. Wiley, New Jersey (1990)

19.

Boris, J.; Primož, P.; Julia, K.: An investigation of slewing-crane dynamics during slewing motion—development and verification of a mathematical model. Int. J. Mech. Sci. 46(5), 729–750 (2004)CrossRef

Titel: Jib Vibration and Payload Swing of Tower Cranes in the Case of Trolley Motion
verfasst von: Runhui Feng
En Zhang
Mingxiao Dong
Publikationsdatum: 02.07.2021
Verlag: Springer Berlin Heidelberg
Erschienen in: Arabian Journal for Science and Engineering / Ausgabe 12/2021
Print ISSN: 2193-567X
Elektronische ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-021-05804-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2021

Process Parameters Effect Investigations on Viscosity of Water-ethylene Glycol-based α-alumina Nanofluids: An Ultrasonic Experimental and Statistical Approach

Optimization of Parameters Affecting the Performance and Emissions of a Spark Ignition Engine Fueled with n-Pentanol/Gasoline Blends Using Taguchi Method

Effect of Horizontal Plate Length on Cutting Resistance of Blade Under Different Cutting Depths in a Sandy Soil

Experimental Verification of Numerical Computation with Evolved Material Property Model and Sensitivity Analysis on WAAM Distortion using P-GMAW

Correction to: Engineering of Novel Fe-Based Bulk Metallic Glasses Using a Machine Learning-Based Approach

Nonlinear Static Analysis of a Bi-directional Functionally Graded Microbeam Based on a Nonlinear Elastic Foundation Using Modified Couple Stress Theory

Premium Partner

Marktübersichten