nach oben

Arabian Journal for Science and Engineering

Erschienen in:

30.06.2021 | Research Article-Mechanical Engineering

Torsional Vibration for Rolling Mill with the Drive System Shaft Axis Deviations

verfasst von: Yan Peng, Jinxing Cui, Jianliang Sun, Ming Zhang

Erschienen in: Arabian Journal for Science and Engineering | Ausgabe 12/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The torsional vibration is a technical problem during the rolling process, which seriously affects rolling stability and production efficiency. In order to study the influence of axis deviation of the rolling mill transmission system on torsional vibration, a reasonable dynamic model can be established to explore its dynamic characteristics. In this paper, considering the periodic excitation caused by the axis deviations and the torsional torque change under the torsional vibration, the nonlinear dynamic model of the transmission system was established. The simulation results show the energy input to the main transmission system approximately periodically through obtaining the drive energy of the rolling mill motor by the equivalent eccentric mass. The dynamic change of tension and friction moment of the strip is caused by the torsional vibration of the transmission system, which leads to an unstable energy conversion process in the rolling interface. Through the monitoring experiment data by taking the 7-stand tandem hot rolling mill of Chengde Steel Co. for example, the theory reliability was further verified. All these research results are significant to solving the torsional vibration problem of rolling mill drive system with axis deviations and provide references for the operation in the strip production process.

Vorheriger Artikel Impacts of Viscous Dissipation and Thermal Radiation on Rabinowitsch Fluid Model Obeying Peristaltic Mechanism with Wall Properties

Nächster Artikel Jib Vibration and Payload Swing of Tower Cranes in the Case of Trolley Motion

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Fan, X.B.; Zhao, B.; Jiang, Y.; Fan, B.X.: Review on main drive torsional vibration and roller coupling vibration of rolling mill. Recent Patents Eng. 14, 1872–2121 (2020). https://doi.org/10.2174/1872212114999200421150533CrossRef

Zou, J.X.: Vibration control of tandem cold rolling mill system. Metallurgical Industry Press, Beijing (1998)

Niroomand, M.R.; Forouzan, M.R.; Salimi, M.: Prediction of surface quality due to chatter vibration in rolling of thin steel strip using ALE finite element method. Key Eng. Mater. 473(473), 572–578 (2011)CrossRef

Wen, B.C.; Wu, X.H.; Ding, Q.; Han, Q.K.: Nonlinear dynamics theory and experiment of rotating machinery with faults. The Science Publishing Company, Shanghai (2004)

Liu, S.; Liu, J.J.; Wu, Z.; Li, J.X.: Bifurcation control for electromechanical coupling torsional vibration in rolling mill system driven by DC motor. J. Vibroeng. 50(1), 113–125 (2016). https://doi.org/10.3233/jae-150083CrossRef

Shi, P.M.; Li, J.Z.; Jiang, J.S.; Liu, B.; Han, D.Y.: Nonlinear dynamics of torsional vibration for rolling mill’s main drive system under parametric excitation. J Iron Steel Res. Int. 20, 7–12 (2013). https://doi.org/10.1016/S1006-706X(13)60037-0CrossRef

Nagai, N.; Furumoto, H.; Hayashi, K.; Ishida, T.; Nakagawa, N.: Experimental and analytical evaluation for torsional vibration of hot rolling mill with twin-type drive system. J. Jstp. 50(580), 409–413 (2009). https://doi.org/10.9773/sosei.50.409CrossRef

Brandon, Q.; Ueta, T.; Fournier-Prunaret, D.; Kousaka, T.: Numerical bifurcation analysis framework for autonomous piecewise-smooth dynamical systems. Chaos Solitons Fract. 42(1), 187–201 (2009). https://doi.org/10.1016/j.chaos.2008.11.013MathSciNetCrossRefMATH

Petersen, S.R.: Impact torsional vibration of direct-current hot strip mill drive motors. Iron Steel Eng. 10, 105–110 (1964)

10.

Shen, Y.Z.; Liu, H.L.; Xiong, J.; Du, G.J.: Analysis of chaotic behavior of the main drive system with clearance of a heavy plate mill. J Eng. Mech. ASCE 27(007), 232–236 (2010). https://doi.org/10.3724/SP.J.1105.2010.10073CrossRef

11.

Fan, X.B.; Zang, Y.; Jin, K.: Rolling process and its influence analysis on hot continuous rolling mill vibration. Appl. Phys. 122, 1008 (2016). https://doi.org/10.1007/s00339-016-0541-6CrossRef

12.

Sun, Y.K.: Model and control of cold and tot strip mill. Metallurgical Industry Press, Beijing (2010)

13.

Harakawa, T.; Nakamura, R.; Kurosawa, R.: Development of high performance rolling mill drive system using PID control method. Tran Sice Jpn. 34(7), 666–673 (2009). https://doi.org/10.9746/sicetr1965.34.666CrossRef

14.

Liu, L.; Fang, Y.M.; Li, X.G.; Li, J.X.: Tensiometer-free control for a speed and tension system of reversible cold strip mill based on Hamilton theory. ACTA Automatics Sinica. 41(1), 165–175 (2015). https://doi.org/10.9746/sicetr1965.34.666CrossRef

15.

Tamaoki, T.; Takanezawa, M.; Kimoto, M.; Morita, N.; Hashizume, K.: Study ononline analysis of transfer function of variable-speed rolling mill motor with shaft torsional vibration systems[J]. IEEJ Transactions Ind. Appl. 131(6), 844–857 (2011). https://doi.org/10.1541/ieejias.131.844CrossRef

16.

Senjanović, I.; Hadžić, N.; Murawski, L.; Vladimir, N.; Alujević, N.; Cho, D.S.: Analytical procedures for torsional vibration analysis of ship power transmission system. Eng. Struct. 178(1), 227–244 (2019). https://doi.org/10.1016/j.engstruct.2018.10.035CrossRef

17.

Selçuk, A.M.; Öktem, H.: An improved method for inference of piecewise linear systems by detecting jumps using derivative estimation. Nonlinear Anal. Hybrid Syst. 3(3), 277–287 (2009). https://doi.org/10.1016/j.nahs.2009.01.006MathSciNetCrossRefMATH

18.

Wang, Z.; Wang, D.: Dynamic characteristics of a rolling mill drive system with backlash in rolling slippage. J. Mater. Processing Tech. 97(1), 69–73 (2000). https://doi.org/10.1016/S0924-0136(99)00329-5CrossRef

19.

Kim, Y.; Kim, C.W.; Lee, S.; Park, H.: Dynamic modeling and numerical analysis of a cold rolling mill. Int J Precis Eng Man. 14(3), 407–413 (2013). https://doi.org/10.1007/s12541-013-0056-4CrossRef

20.

Mabrouk, I.B.; Hami, A.E.; Walha, L.; Zghal, B.; Haddar, M.: Dynamic response analysis of vertical axis wind turbine geared transmission system with uncertainty. Eng. Struct. 139, 170–179 (2017). https://doi.org/10.1016/j.engstruct.2017.02.028CrossRef

21.

Cheng, Q.; Hua, C.C.; Zhang, L.L.; Bai, Z.H.: Adaptive neural torsional vibration suppression of the rolling mill main drive system subject to state and input constraints with sensor errors. J. Frankl. Inst. 357(17), 12886–12903 (2020). https://doi.org/10.1016/j.jfranklin.2020.08.003MathSciNetCrossRefMATH

22.

Wang, L.; Frayman, Y.: A dynamically generated fuzzy neural network and its application to torsional vibration control of tandem cold rolling mill spindles. Eng. Appl. Artif. Intell. 15(6), 541–550 (2002). https://doi.org/10.1016/S0952-1976(03)00006-XCrossRef

23.

Frayman,Y., Wang, L.P.: Torsional vibration control of tandem cold rolling mill spindles: a fuzzy neural approach. Proc. the Australia-Pacific Forum on Intelligent Processing and Manufacturing of Materials. 1, 89–94(1997)

24.

Frayman,Y., Wang, L.P.: Dynamically constructed recurrent fuzzy neural network for cold rolling mill thickness control. Poster Proceedings of the 11th Australian Joint Conference on Artificial Intelligence.1, 15–23(1998)

25.

Gao, C.Y.; Du, G.J.; Li, R.; Guo, X.Q.: An analysis on strip vibration coupled with torsional vibration of main drive system of rolling mill. J Vibroeng. 19(8), 5679–5690 (2007)

26.

Peng, Y.; Zhang, M.; Sun, J.L.; Zhang, Y.: Experimental and numerical investigation on the roll system swing vibration characteristics of a hot rolling mill. ISIJ Int. 57(9), 1567–1576 (2017). https://doi.org/10.2355/isijinternational.ISIJINT-2016-611CrossRef

27.

Shi, P.M.; Xia, K.W.; Liu, B.; Jiang, J.S.: Dynamics behaviors of rolling mill’s nonlinear torsional vibration of multi-degree-of-freedom main drive system with clearance. J. Mech. Eng. 48(17), 57–64 (2012). https://doi.org/10.3901/JME.2012.17.057CrossRef

28.

Yan, X.Q.; Wu, X.F.; Yang, X.E.; Wu, S.T.; Xu, J.Z.: Coupling research on torsional vibration and axial vibration of hot strip rolling mill [J]. Eng. Mech. 31(2), 214–218 (2014). https://doi.org/10.6052/j.issn.1000-4750.2012.09.0694CrossRef

29.

Yun, I.S.; Wilson, W.R.D.; Ehmann, K.F.: Review of chatter studies in cold rolling. Int. J. Mach. Tools Manuf. 38(1), 1499–1530 (1998). https://doi.org/10.1016/s0890-6955(97)00133-8CrossRef

30.

Hu, P.H.; Ehmann, K.F.: A dynamic model of the rolling process part 1 homogeneous model [J]. Int. J. Mach. Tools Manuf. 40(1), 1–19 (2000). https://doi.org/10.1016/S0890-6955(99)00049-8CrossRef

31.

Hu, P.H.: Stability and chatter in rolling. Northwestern University. 1998

32.

Wang, Y.T.; Zang, Y.; Wu, D.P.; Fan, X.B.: Studies on the cause of vibration of CSP rolling mill. J. Vib. Meas. Diagnosis 28(4), 365–370 (2008). https://doi.org/10.3969/j.issn.1004-6801.2008.04.021CrossRef

33.

Liu, S.; Sun, B.P.; Zhao, S.S.; Li, J.X.; Zhang, W.M.: Strongly nonlinear dynamics of torsional vibration for rolling Mill’s electromechanical coupling system. Steel Res. Int. 86, 984–992 (2015). https://doi.org/10.1002/srin.201400216CrossRef

34.

Xu, T.; Hou, D.X.; Sun, Z.N.; Guo, D.W.: Vibration characteristics of multi-parametric excitations and multi-frequency external excitations of rolling mill under entry thickness fluctuation of strip. J. Iron Steel Res. Int. 27(5), 517–527 (2020). https://doi.org/10.1007/s42243-020-00404-1CrossRef

35.

Sun, J.L.; Zhang, M.; Peng, Y.: Torsional vibration of 6-H rolling mill based on continuum dynamics and its relationship with strip quality. Eng. Mech. 031(004), 239–244 (2014). https://doi.org/10.6052/j.issn.1000-4750.2012.10.0801CrossRef

36.

Zhang, R.C.; Tong, C.N.: Torsional vibration control of the main drive system of a rolling mill based on an extended state observer and linear quadratic control[J]. J. Vib. Control. 12(3), 313–327 (2006). https://doi.org/10.1177/1077546306063224MathSciNetCrossRefMATH

37.

Kaminski, M.; Orlowska, K.T.: Optimisation of neural state variables estimators of two-mass drive system using the Bayesian regularization method. B Pol Acad Sci-Tech. 59(1), 33–38 (2011). https://doi.org/10.2478/v10175-011-0006-1CrossRefMATH

38.

Frayman, Y.; Wang, L.P.; Wan, C.: Cold rolling mill thickness control using the cascade-correlation neural network. Control Cybern. 31(2), 327–342 (2002). https://doi.org/10.1007/s004220100273CrossRefMATH

39.

Amer, Y.A.; El-Sayed, A.T.; El-Bahrawy, F.T.: Torsional vibration reduction for rolling mill’s main drive system via negative velocity feedback under parametric excitation. J. Mech. Sci. Technol. 29(4), 1581–1589 (2015). https://doi.org/10.1007/s12206-015-0330-8CrossRef

40.

Zhao, J.J.: Plate and Strip Production. Metallurgical Industry Press, Beijing (1992)

41.

Niroomand, M.R.; Forouzan, M.R.; Salimi, M.; Mahmoud, S.; Hamid, S.: Experimental investigations and ALE finite element method analysis of chatter in cold strip rolling. Isij Int. 52(12), 2245–2253 (2012). https://doi.org/10.2355/isijinternational.52.2245CrossRef

42.

Niroomand, M.R.; Forouzan, M.R.; Salimi, M.: Theoretical and experimental analysis of chatter in tandem cold rolling mills based on wave propagation theory[J]. ISIJ Int. 55(3), 637–646 (2015). https://doi.org/10.2355/isijinternational.55.637CrossRef

43.

Wang, Q.Y.; Zhang, Z.; Chen, H.Q.; Guo, S.; Zhao, J.W.: Characteristics of unsteady lubrication film in metal-forming process with dynamic roll gap. J. Cent. S. Univ. 21(10), 3787–3792 (2014). https://doi.org/10.1007/s11771-014-2363-zCrossRef

Titel: Torsional Vibration for Rolling Mill with the Drive System Shaft Axis Deviations
verfasst von: Yan Peng
Jinxing Cui
Jianliang Sun
Ming Zhang
Publikationsdatum: 30.06.2021
Verlag: Springer Berlin Heidelberg
Erschienen in: Arabian Journal for Science and Engineering / Ausgabe 12/2021
Print ISSN: 2193-567X
Elektronische ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-021-05684-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2021

Three-Dimensional CFD Modeling of Serpentine Flow Field Configurations for PEM Fuel Cell Performance

Review on Spray-Assisted Solar Desalination: Concept, Performance and Modeling

Investigation of Ring Rolling Key Parameters for Decreasing Geometrical Ring Defects by 3D Finite Element and Experiments

Computational Erosion Wear Model Validation of Particulate Flow Through Mitre Pipe Bend

A New Optimization Technique in Examining the Machinability of Sverker 21 Steel: Gray Relational Analysis-Based Genetic Algorithm

Crushed Rubber from Used Tires for Thermal Insulation of Walls and Flat Roofs: Modeling, Validation and Comparison with Conventional Technology

Premium Partner

Marktübersichten