nach oben

Lasers in Manufacturing and Materials Processing

Erschienen in:

13.11.2023 | Research

Laser-Based Additive Manufacturing and Mechanical Surface Post-Processing: Comparison of Barrel Finishing, Shot and Ultrasonic Peening for Corrosion Resistance Improvement of Superalloy

verfasst von: D. A. Lesyk, B. N. Mordyuk, S. Martinez, V. V. Dzhemelinskyi, D. Grzesiak, D. Grochała, A. Lamikiz

Erschienen in: Lasers in Manufacturing and Materials Processing | Ausgabe 4/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Nickel-based alloy test parts were manufactured using an industrial laser 3D printing system. The corrosion behavior of the laser powder bed fused (LPBF) Inconel 718 alloy parts are analyzed in as-built and mechanical surface post-processed conditions, i.e. after barrel finishing, shot peening, ultrasonic shot peening, and multi-pin ultrasonic impact treatment. The microstructural features are analyzed using the X-Ray diffraction (XRD) analysis and scanning electron microscopy (SEM) / energy dispersive spectroscopy (EDS) methods. The open circuit potential and linear/cyclic polarization were registered in a 3.5 wt.% NaCl solution. The surface roughness diminishment, defects elimination, residual pores’ closure, as well as the residual stress and structure-phase state changes were under special attention. The polarization resistance, corrosion current density, corrosion rate, pitting initiation rate, anodic dissolution, ability for repassivation, and crevice corrosion resistance were assessed and compared.

Vorheriger Artikel Developing Laser-Assisted Machining Process for Nickel Based Superalloy IN625 Using Experimental and Statistical Analysis

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Osoba, L.O., Oladoye, A.M., Ogbonna, V.E.: Corrosion evaluation of superalloys Haynes and Inconel 718 in hydrochloric acid. J. Alloys Compd. 804, 376–384 (2019). https://doi.org/10.1016/j.jallcom.2019.06.196CrossRef

Frazier, W.E.: Metal additive manufacturing: A review. J. Mater. Eng. Perform. 23, 1917–1928 (2014). https://doi.org/10.1007/s11665-014-0958-zCrossRef

Wang, X., Gong, X., Chou, K.: Review on powder-bed laser additive manufacturing of Inconel 718 parts. Proc. of the Institution of Mechanical Engineers. Part B: J. Eng. Manuf. 231, 1890–1903 (2017). https://doi.org/10.1177/0954405415619883CrossRef

Karia, M.C., Popat, M.A., Sangani, K.B.: selective laser melting of inconel super alloy – A review. AIP Conference Proc. 1859, 020013–020020 (2017). https://doi.org/10.1063/1.4990166

Witkin, D.B., Patel, D.N., Helvajian, H., Steffeney, L., Diaz, A.: Surface treatment of powder-bed fusion additive manufactured metals for improved fatigue life. J. Mater. Eng. Perform. 28, 681–692 (2019). https://doi.org/10.1007/s11665-018-3732-9CrossRef

Wang, Y., Shi, J., Lu, S., Wang, Y.: Selective laser melting of graphene-reinforced Inconel 718 superalloy: Evaluation of microstructure and tensile performance. Manuf. Sci. Eng. 139, 8683–8691 (2017). https://doi.org/10.1115/1.4034712CrossRef

Lesyk, D.A., Martinez, S., Dzhemelinskyi, V.V., Lamikiz, A.: Additive manufacturing of the superalloy turbine blades by selective laser melting: Surface quality, microstructure and porosity, NT 2020. Lect. Notes Netw. Syst. 128, 267–275 (2020). https://doi.org/10.1007/978-3-030-46817-0_30CrossRef

Kong, D., Ni, X., Dong, C., Zhang, L., Yao, J., Man, C., Wanga, L., Xiao, K., Li, X.: Anisotropic response in mechanical and corrosion properties of hastelloy X fabricated by selective laser melting. Constr. Build. Mater. 221, 720–729 (2019). https://doi.org/10.1016/j.conbuildmat.2019.06.132CrossRef

Cabrini, M., Lorenzi, S., Testa, C., Pastore, T., Brevi, F., Biamino, S., Fino, P., Manfredi, D., Marchese, G., Calignano, F., Scenini, F.: Evaluation of corrosion resistance of alloy 625 obtained by laser powder bed fusion. J. Electrochem. Soc. 166(11), C3399 (2019). https://doi.org/10.1149/2.0471911jesCrossRef

10.

Trosch, T., Strobner, J., Volkl, R., Glatzel, U.: Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting. Mater. Lett. 164, 428–431 (2016). https://doi.org/10.1016/j.matlet.2015.10.136CrossRef

11.

Basak, S., Sharma, S.K., Sahu, K.K., Gollapudi, S., Majumdar, J.D.: Surface modification of structural material for nuclear applications by electron beam melting: enhancement of microstructural and corrosion properties of Inconel 617. SN Appl. Sci. 1(7), 708 (2019). https://doi.org/10.1007/s42452-019-0744-5CrossRef

12.

Wang, Z., Guana, K., Gaoa, M., Li, X., Chen, X., Zeng, X.: The microstructure and mechanical properties of deposited-IN718 by selective laser melting. J. Alloy. Compd. 513, 518–523 (2012). https://doi.org/10.1016/j.jallcom.2011.10.107CrossRef

13.

Mostafa, A., Rubio, I.P., Brailovski, V., Jahazi, M., Medraj, M.: Structure, texture and phases in 3D printed IN718 alloy subjected to homogenization and HIP treatments. Metals. 7, 196–219 (2017). https://doi.org/10.3390/met7060196CrossRef

14.

Lesyk, D.A., Martinez, S., Mordyuk, B.N., Dzhemelinskyi, V.V., Lamikiz, A., Prokopenko, G.I.: Post-processing of the Inconel 718 alloy parts fabricated by selective laser melting: Effects of mechanical surface treatments on surface topography, porosity, hardness and residual stress. Surf. Coat. Technol. 381, 125136 (2020). https://doi.org/10.1016/j.surfcoat.2019.125136CrossRef

15.

Kuo, Y.L., Nagahari, T., Kakehi, K.: The effect of post-processes on the microstructure and creep properties of alloy718 built up by selective laser melting. Mater. 11, 996–1009 (2018). https://doi.org/10.3390/ma11060996CrossRef

16.

Seede, R., Mostafa, A., Brailovski, V., Jahazi, M., Medraj, M.: Microstructural and microhardness evolution from homogenization and hot isostatic pressing on selective laser melted Inconel 718: Structure, texture, and phases. Manuf. Mater. Process. 2, 30–51 (2018). https://doi.org/10.3390/jmmp2020030CrossRef

17.

Thiede, T., Cabeza, S., Mishurova, T., Kromm, A., Bode, J., Haberland, C., Bruno, G.: Residual stress in selective laser melted Inconel 718: Influence of the removal from base plate and deposition hatch length. Mater. Perform. Character. 7, 0119–0138 (2017). https://doi.org/10.1520/MPC20170119CrossRef

18.

Sander, G., Tan, J., Balan, P., Gharbi, O., Feenstra, D.R., Singer, L., Thomas, S., Kelly, R.G., Scully, J.R., Birbilis, N.: Corrosion of additively manufactured alloys: A review. Corros. 74(12), 1318–1350 (2018). https://doi.org/10.5006/2926CrossRef

19.

Dryepondt, S., Kirka, M.M., List III, F.A.: Oxidation behavior of Ni-based alloys fabricated by additive manufacturing. In: Paper presented at the CORROSION 2019, Nashville (2019) NACE-2019-13558. https://www.osti.gov/servlets/purl/1658013

20.

Guo, P., Lina, X., Li, J., Zhang, Y., Song, M., Huang, W.: Electrochemical behavior of Inconel 718 fabricated by laser solid forming on different sections. Corros. Sci. 132, 79–89 (2018). https://doi.org/10.1016/j.corsci.2017.12.021CrossRef

21.

Kong, D., Dong, C., Ni, X., Zhang, L., Man, C., Zhu, G., Yao, J., Yao, J., Wang, L., Cheng, X., Li, X.: Effect of TiC content on the mechanical and corrosion properties of Inconel 718 alloy fabricated by a high-throughput dual-feed laser metal deposition system. J. Alloys Compd. 803, 637–648 (2019). https://doi.org/10.1016/j.jallcom.2019.06.317CrossRef

22.

Asala, G., Andersson, J., Ojo, O.A.: Hot corrosion behaviour of wire-arc additive manufactured Ni-based superalloy ATI 718Plus®. Corros. Sci. 158, 108086 (2019). https://doi.org/10.1016/j.corsci.2019.07.010CrossRef

23.

Wang, Y., Chen, X.: Investigation on the microstructure and corrosion properties of Inconel 625 alloy fabricated by wire arc additive manufacturing. Mater. Res. Express. 6(10), 106568 (2019). https://doi.org/10.1088/2053-1591/ab39f6MathSciNetCrossRef

24.

Zhang, L.N., Ojo, O.A.: Corrosion behavior of wire arc additive manufactured Inconel 718 superalloy. J. Alloys Compd. 829, 154455 (2020). https://doi.org/10.1016/j.jallcom.2020.154455CrossRef

25.

Karimi, P., Sadeghi, E., Algardh, J., Harlin, P., Andersson, J.: Effect of build location on microstructural characteristics and corrosion behavior of EB-PBF built alloy 718. Int. J. Adv. Manuf. Technol. 106(7), 3597–3607 (2020). https://doi.org/10.1007/s00170-019-04859-9CrossRef

26.

Klapper, H.S., Molodtsov, N., Burns, M., Wangenheim, C.: Critical factors affecting the pitting corrosion resistance of additively manufactured nickel alloy in chloride containing environments, Corros. 2017, paper no. 9345. NACE, Houston TX (2017)

27.

Lefky, C.S., Gallmeyer, T.G., Moorthy, S., Stebner, A., Hildreth, O.J.: Microstructure and corrosion properties of sensitized laser powder bed fusion printed Inconel 718 to dissolve support structures in a self-terminating manner. Addit. Manuf. 27, 526–532 (2019). https://doi.org/10.1016/j.addma.2019.03.020CrossRef

28.

Kong, D., Dong, C., Ni, X., Li, X.: Corrosion of metallic materials fabricated by selective laser melting. NPJ Mater. Degrad. 3, 24 (2019). https://doi.org/10.1038/s41529-019-0086-1CrossRef

29.

Mythreyi, O.V., Raja, A., Nagesha, B.K., Jayaganthan, R.: Corrosion study of selective laser melted IN718 alloy upon post heat treatment and shot peening. Metals. 10(12), 1562 (2020). https://doi.org/10.3390/met10121562CrossRef

30.

Tang, Y., Shen, X., Qiao, Y., Yang, L., Chen, J., Lu, D., Zhang, Z.: Corrosion behavior of a selective laser melted Inconel 718 alloy in a 3.5 wt.% NaCl solution. J. Mater. Eng. Perform. 30, 5506–5514 (2021). https://doi.org/10.1007/s11665-021-05909-8CrossRef

31.

Juillet, C., Oudriss, A., Balmain, J., Feaugas, X., Pedraza, F.: Characterization and oxidation resistance of additive manufactured and forged IN718 Ni-based superalloys. Corros. Sci. 142, 266–276 (2018). https://doi.org/10.1016/j.corsci.2018.07.032CrossRef

32.

Li, H., Feng, S., Li, J., Gong, J.: Effect of heat treatment on the δ phase distribution and corrosion resistance of selective laser melting manufactured Inconel 718 superalloy. Corros. Mater. 69(10), 1350–1354 (2018). https://doi.org/10.1002/maco.201810159CrossRef

33.

Lesyk, D.A., Martinez, S., Pedash, O.O., Dzhemelinskyi, V.V., Lamikiz, A.: Porosity and surface defects characterization of hot isostatically pressed Inconel 718 alloy turbine blades printed by 3D laser metal fusion technology. MRS Adv. 7, 197–201 (2022). https://doi.org/10.1557/s43580-021-00187-xCrossRef

34.

Maleki, E., Unal, O., Guagliano, M., Bagherifard, S.: The effects of shot peening, laser shock peening and ultrasonic nanocrystal surface modification on the fatigue strength of Inconel 718. Mater. Sci. Eng. A. 810, 141029 (2021). https://doi.org/10.1016/j.msea.2021.141029CrossRef

35.

Lee, S., Shao, S., Wells, D.N., Zetek, M., Kepka, M., Shamsaei, N.: Fatigue behavior and modeling of additively manufactured IN718: The effect of surface treatments and surface measurement techniques. J. Mater. Process. Technol. 302, 117475 (2022). https://doi.org/10.1016/j.jmatprotec.2021.117475CrossRef

36.

Dehghanghadikolaei, A., Ibrahim, H., Amerinatanzi, A., Hashemi, M., Moghaddam, N.S., Elahinia, M.: Improving corrosion resistance of additively manufactured nickel–titanium biomedical devices by microarc oxidation process. J. Mater. Sci. 54(9), 7333–7355 (2019). https://doi.org/10.1007/s10853-019-03375-1CrossRef

37.

Lesyk, D.A., Martinez, S., Pedash, O.O., Mordyuk, B.N., Dzhemelinskyi, V.V., Lamikiz, А.: Nickel superalloy turbine blade parts printed by laser powder bed fusion: Thermo-mechanical post-processing for enhanced surface integrity and precipitation strengthening. J. Mater. Eng. Perform. 31, 6283–6299 (2022). https://doi.org/10.1007/s11665-022-06710-xCrossRef

38.

Lesyk, D.A., Martinez, S., Mordyuk, B.N., Pedash, O.O., Dzhemelinskyi, V.V., Lamikiz, А.: Ultrasonic surface post-processing of hot isostatic pressed and heat treated superalloy parts manufactured by laser powder bed fusion. Addit. Manuf. Lett. 3, 100063 (2022). https://doi.org/10.1016/j.addlet.2022.100063CrossRef

39.

Sadeghi, M., Diaz, A., McFadden, P., Sadeghi, E.: Chemical and mechanical post-processing of Alloy 718 built via electron beam-powder bed fusion: Surface texture and corrosion behavior. Mater. Des. 214, 110405 (2022). https://doi.org/10.1016/j.matdes.2022.110405CrossRef

40.

Raghavan, S., Zhang, B., Wang, P., Sun, C.N., Nai, M.L.S., Li, T., Wei, J.: Effect of different heat treatments on the microstructure and mechanical properties in selective laser melted Inconel 718 alloy. Mater. Manuf. Process. 32, 1588–1595 (2017). https://doi.org/10.1080/10426914.2016.1257805CrossRef

41.

Jinoop, A.N., Kanmani Subbu, S., Paul, C.P., Palani, I.A.: Post-processing of laser additive manufactured Inconel 718 using laser shock peening. Int. J. Precis. Eng. Manuf. 20, 1621–1628 (2019). https://doi.org/10.1007/s12541-019-00147-4CrossRef

42.

Munther, M., Tajyar, A., Holtham, N., Hackel, L., Beheshti, A., Davami, K.: An investigation into the mechanistic origin of thermal stability in thermal-microstructural-engineered additively manufactured Inconel 718. Vacuum. 199, 110971 (2022). https://doi.org/10.1007/s12541-019-00147-4CrossRef

43.

Kaynak, Y., Tascioglu, E.: Post-processing effects on the surface characteristics of Inconel 718 alloy fabricated by selective laser melting additive manufacturing. Prog. Addit. Manuf. 5, 221–234 (2020). https://doi.org/10.1007/s40964-019-00099-1CrossRef

44.

Boschetto, A., Bottini, L., Macera, L., Veniali, F.: Post-processing of complex SLM parts by barrel finishing. Appl. Sci. 10, 1382 (2020). https://doi.org/10.3390/app10041382CrossRef

45.

Balbaa, M., Ghasemi, A., Fereiduni, E., Al-Rubaie, K., Elbestawi, M.: Improvement of fatigue performance of laser powder bed fusion fabricated IN625 and IN718 superalloys via shot peening. J. Mater. Process. Technol. 304, 117571 (2022). https://doi.org/10.1016/j.jmatprotec.2022.117571CrossRef

46.

Lesyk, D.A., Dzhemelinskyi, V.V., Martinez, S., Grzesiak, D., Mordyuk, B.N.: Functional evaluation of surface texture in laser selective melted Inconel 718 alloy parts processed by shot peening, InterPartner 2022. Lect. Notes Mech. Eng. (2023) 294. –305. https://doi.org/10.1007/978-3-031-16651-8_28

47.

Zhang, B., Xiu, M., Tan, Y.T., Wei, J., Wang, P.: Pitting corrosion of SLM Inconel 718 sample under surface and heat treatments. Appl. Surf. Sci. 490, 556–567 (2019). https://doi.org/10.1016/j.apsusc.2019.06.043CrossRef

48.

Lesyk, D.A., Martinez, S., Dzhemelinskyi, V.V., Stamann, O., Mordyuk, B.N., Lamikiz, A.: Surface polishing of laser powder bed fused superalloy components by magnetic post-treatment. NAP. 2020, 02SAMA17-1–02SAMA17-4 (2020). https://doi.org/10.1109/NAP51477.2020.9309600CrossRef

49.

Lesyk, D.A., Martinez, S., Pedash, O.O., Dzhemelinskyi, V.V., Mordyuk, B.N.: Combined thermo-mechanical techniques for post-processing of the SLM-printed Ni-Cr-Fe alloy parts, DSMIE 2020. Lect. Notes Mech. Eng. 295–304 (2020). https://doi.org/10.1007/978-3-030-50794-7_29

50.

Karthik, D., Swaroop, S.: Laser shock peening enhanced corrosion properties in a nickel based Inconel 600 superalloy. J. Alloy. Compd. 694, 1309–1319 (2017). https://doi.org/10.1016/j.jallcom.2016.10.093CrossRef

51.

Xing, X., Duan, X., Jiang, T., Wang, J., Jiang, F.: Ultrasonic peening treatment used to improve stress corrosion resistance of AlSi10Mg components fabricated using selective laser melting. Metals. 9, 103–111 (2019). https://doi.org/10.3390/met9010103CrossRef

52.

Lesyk, D.A., Martinez, S., Mordyuk, B.N., Dzhemelinskyi, V.V., Lamikiz, A.: Surface finishing of complexly shaped parts fabricated by selective laser melting, InterPartner-2019. Lect. Notes Mech. Eng. 186–195 (2020). https://doi.org/10.1007/978-3-030-40724-7_19

53.

Jiménez, A., Bidare, P., Hassanin, H., Tarlochan, F., Dimov, S., Essa, K.: Powder-based laser hybrid additive manufacturing of metals: a review. Int. J. Adv. Manuf. Technol. 114, 63–96 (2021). https://doi.org/10.1007/s00170-021-06855-4CrossRef

54.

Wang, Y., Shi, J.: Microstructure and properties of Inconel 718 fabricated by directed energy deposition with in-situ ultrasonic impact peening. Metall. Mater. Trans. B. 50, 2815–2827 (2019). https://doi.org/10.1007/s11663-019-01672-3CrossRef

55.

Wang, Y., Shi, J.: Recrystallization behavior and tensile properties of laser metal deposited Inconel 718 upon in-situ ultrasonic impact peening and heat treatment. Mater. Sci. Eng. A. 786, 139434 (2020). https://doi.org/10.1016/j.msea.2020.139434CrossRef

56.

Sun, L., Huang, L., Wu, P., Huang, R., Fang, N., Xu, F., Xu, K.: Progress on the effect and mechanism of ultrasonic impact treatment on additive manufactured metal fabrications. Metall. Mater. Trans. B. 13, 995 (2023). https://doi.org/10.3390/cryst13070995CrossRef

57.

Martinez, S., Ortega, N., Celentano, D., Egea, A.J.S., Ukar, E., Lamikiz, A.: Analysis of the Part distortions for Inconel 718 SLM: A case study on the NIST test artifact. Mater. 13, 5087 (2020). https://doi.org/10.3390/ma13225087CrossRef

58.

Sendino, S., Gardon, M., Lartategui, F., Martinez, S., Lamikiz, A.: The effect of the laser incidence angle in the surface of L-PBF processed parts. Coat. 10, 1024 (2020). https://doi.org/10.3390/coatings10111024CrossRef

59.

Lesyk, D.A., Dzhemelinskyi, V.V., Martinez, S., Mordyuk, B.N., Lamikiz, А.: Surface shot peening post-processing of Inconel 718 alloy parts printed by laser powder bed fusion additive manufacturing. J. Mater. Eng. Perform. 30, 6982–6995 (2021). https://doi.org/10.1007/s11665-021-06103-6CrossRef

60.

Mordyuk, B.N., Prokopenko, G.I.: Ultrasonic impact treatment–An effective method for nanostructuring the surface layers in metallic materials, in: M. Aliofhazraei Ed. Handbook of Mechanical Nanostructuring. 417–434 (2015). https://doi.org/10.1002/9783527674947.ch17

61.

Lesyk, D.A., Martinez, S., Mordyuk, B.N., Dzhemelinskyi, V.V., Lamikiz, A., Prokopenko, G.I.: Effects of laser heat treatment combined with ultrasonic impact treatment on the surface topography and hardness of carbon steel AISI 1045. Optics Laser. Technol. 111, 424–438 (2019). https://doi.org/10.1016/j.optlastec.2018.09.030CrossRef

62.

Evgeny, B., Hughes, T., Eskin, D.: Effect of surface roughness on corrosion behaviour of low carbon steel in inhibited 4 M hydrochloric acid under laminar and turbulent flow conditions. Corros. Sci. 103, 196–205 (2016). https://doi.org/10.1016/j.corsci.2015.11.019

63.

Grzesik, W.: Prediction of the functional performance of machined components based on surface topography: State of the art. J. Mater. Eng. Perform. 25, 4460–4468 (2016). https://doi.org/10.1007/s11665-016-2293-zCrossRef

64.

To, D., Umezawa, O., Shinohara, T.: Detection of surface roughness evolution of carbon steel subjected to outdoor exposure and constant humidity corrosion tests. Mater. Trans. 59, 1239–1243 (2018). https://doi.org/10.2320/matertrans.MF201702CrossRef

65.

Bergant, Z., Trdan, U., Grum, J.: Effect of high-temperature furnace treatment on the microstructure and corrosion behavior of NiCrBSi flame-sprayed coatings. Corros. Sci. 88, 372–386 (2014). https://doi.org/10.1016/j.corsci.2014.07.057

66.

Xia, D.-H., Deng, C.-M., Macdonald, D., Jamali, S., Mills, D., Luo, J.-L., Strebl, M.G., Amiri, M., Jin, W., Song, S., Hu, W.: Electrochemical measurements used for assessment of corrosion and protection of metallic materials in the field: A critical review. J. Mater. Sci. Technol. 112, 151–183 (2022). https://doi.org/10.1016/j.jmst.2021.11.004CrossRef

67.

Trdan, U., Grum, J.: Evaluation of corrosion resistance of AA6082-T651 aluminium alloy after laser shock peening by means of cyclic polarisation and ElS methods. Corrosion Sci. 59, 324–333 (2012). https://doi.org/10.1016/j.corsci.2012.03.019CrossRef

68.

Trdan, U., Hočevar, M., Gregorcic, P.: Transition from superhydrophilic to superhydrophobic state of laser textured stainless steel surface and its effect on corrosion resistance. Corros. Sci. 123, 21–26 (2017). https://doi.org/10.1016/j.corsci.2017.04.005CrossRef

69.

Lesyk, D.A., Mordyuk, B.N., Martinez, S., Iefimov, M.O., Dzhemelinskyi, V.V., Lamikiz, А.: Influence of combined laser heat treatment and ultrasonic impact treatment on microstructure and corrosion behavior of AISI 1045 steel. Surf. Coat. Technol. 401, 126275 (2020). https://doi.org/10.1016/j.surfcoat.2020.126275CrossRef

70.

Ailor, W.H. (ed.): Handbook on Corrosion testing and evaluation, p. 174. John Wiley and Sons Inc., New York (1971)

71.

Popova, K., Prošek, T.: Corrosion monitoring in atmospheric conditions: A review. Metals. 12, 171 (2022). https://doi.org/10.3390/met12020171CrossRef

72.

Bagherifard, S., Hickey, D.J., Fintova, S., Pastorek, F., Fernandez-Pariente, I., Bandini, M., Webster, T.J., Guagliano, M.: Effects of nanofeatures induced by severe shot peening (SSP) on mechanical, corrosion and cytocompatibility properties of magnesium alloy AZ31. Acta Biomater. 66, 93–108 (2018). https://doi.org/10.1016/j.actbio.2017.11.032CrossRef

73.

Jáquez-Muñoz, J.M., Gaona-Tiburcio, C., Cabral-Miramontes, J., Nieves-Mendoza, D., Maldonado-Bandala, E., Olguín-Coca, J., López-Léon, L.D., los Rios, J.P.F.-D., Almeraya-Calderón, F.: Electrochemical noise analysis of the corrosion of titanium alloys in NaCl and H2SO4 solutions. Metals. 11, 105 (2021). https://doi.org/10.3390/met11010105CrossRef

74.

Toda, H., Minami, K., Koyama, K., Ichitani, K., Kobayashi, M., Uesugi, K., Suzuki, Y.: Healing behavior of preexisting hydrogen micropores in aluminum alloys during plastic deformation. Acta Mater. 57, 4391–4403 (2009). https://doi.org/10.1016/j.actamat.2009.06.012CrossRef

75.

Dekhtyar, A.I., Mordyuk, B.N., Savvakin, D.G., Bondarchuk, V.I., Moiseeva, I.V., Khripta, N.I.: Enhanced fatigue behavior of powder metallurgy Ti–6Al–4V alloy by applying ultrasonic impact treatment. Mater. Sci. Eng. A. 641, 348–359 (2015). https://doi.org/10.1016/j.msea.2015.06.072CrossRef

76.

Mordyuk, B.N., Prokopenko, G.I., Yu, P.V., L.E., Matokhnyuk, L.E., Byalonovich, A.V., Popova T.V.: Improved fatigue behavior of low-carbon steel 20GL by applying ultrasonic impact treatment combined with the electric discharge surface alloying. Mater. Sci. Eng. A 659, 119–129 (2016). https://doi.org/10.1016/j.msea.2016.02.036

77.

Yan, S., Wang, Y., Wang, Q., Zhang, C., Chen, D., Cui, G.: Enhancing mechanical properties of the spark plasma sintered Inconel 718 alloy by controlling the nano-scale precipitations. Mater. 12, 3336 (2019). https://doi.org/10.3390/ma12203336CrossRef

78.

Lesyk, D.A., Martinez, S., Mordyuk, B.N., Pedash, O.O., Dzhemelinskyi, V.V., Lamikiz, А.: Comparison of effects of shot and ultrasonic peening treatments on surface properties of L-PBF-manufactured superalloy subjected to HIP combined with heat treatments. In: Post-processing techniques for additive manufacturing, pp. 207–243. Taylor & Francis (2023). https://doi.org/10.1201/9781003288619-9CrossRef

79.

Pariona, M.M., Teleginski, V., Santos, K.D., Machado, S., Zara, A.J., Zurba, N.K., Riva, R.: Yb-fiber laser beam effects on the surface modification of Al–Fe aerospace alloy obtaining weld filet structures, low fine porosity and corrosion resistance. Surf. Coat. Technol. 206, 2293–2301 (2012). https://doi.org/10.1016/j.surfcoat.2011.10.007CrossRef

80.

Trdan, U., Grum, J.: SEM/EDS characterization of laser shock peening effect on localized corrosion of Al alloy in a near natural chloride environment. Corros. Sci. 82, 328–338 (2014). https://doi.org/10.1016/j.corsci.2014.01.032CrossRef

81.

Finšgar, M., Fassbender, S., Nicolini, F., Milošev, I.: Polyethyleneimine as a corrosion inhibitor for ASTM 420 stainless steel in near-neutral saline media. Corros. Sci. 51, 525–533 (2009). https://doi.org/10.1016/j.corsci.2008.12.006CrossRef

82.

Trueba, M., Trasatti, S.P.: Study of Al alloy corrosion in neutral NaCl by the pitting scan technique. Mater. Chem. Phys. 121, 523–533 (2010). https://doi.org/10.1016/j.matchemphys.2010.02.022CrossRef

Titel: Laser-Based Additive Manufacturing and Mechanical Surface Post-Processing: Comparison of Barrel Finishing, Shot and Ultrasonic Peening for Corrosion Resistance Improvement of Superalloy
verfasst von: D. A. Lesyk
B. N. Mordyuk
S. Martinez
V. V. Dzhemelinskyi
D. Grzesiak
D. Grochała
A. Lamikiz
Publikationsdatum: 13.11.2023
Verlag: Springer US
Erschienen in: Lasers in Manufacturing and Materials Processing / Ausgabe 4/2023
Print ISSN: 2196-7229
Elektronische ISSN: 2196-7237
DOI: https://doi.org/10.1007/s40516-023-00231-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2023

Inverse Model for Simultaneously Estimating Material Parameters and Absorption Coefficient in a Laser-Irradiated Sheet

Experimental Investigation of AISI 304 Plates Deformation Through Laser Trepanning Process

Developing Laser-Assisted Machining Process for Nickel Based Superalloy IN625 Using Experimental and Statistical Analysis

Application of Hybrid Laser Arc Welding for Construction of LNG Tanks Made of Thick Cryogenic 9% Ni Steel Plates

Pulsed Laser Grooving of Silicon Under Different Ambient Media

Laser Beam Polishing of PA12 Parts Manufactured by Powder Bed Fusion

Premium Partner

Marktübersichten