nach oben

European Journal of Wood and Wood Products

Erschienen in:

01.01.2013 | Originals Originalarbeiten

Reducing the set-recovery of surface densified solid Scots pine wood by hydrothermal post-treatment

verfasst von: Kristiina Laine, Lauri Rautkari, Mark Hughes, Andreja Kutnar

Erschienen in: European Journal of Wood and Wood Products | Ausgabe 1/2013

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The mechanical properties of wood surface are of particular interest in applications where mainly the surface is exposed to use, such as flooring boards. Wood surface densification aims to improve these properties by compressing only the first few millimeters beneath the surface. Scots pine (Pinus sylvestris L.) sapwood was surface densified to three degrees of compression at 150 °C using a specially designed heated press. Half of the specimens were hydrothermally post-treated at 200 °C. To study the influence of the degree of compression and hydrothermal post-treatment on the set-recovery, specimens were subjected to water soaking-drying-cycles. The surface densification process resulted in a minor mass loss regardless of the degree of compression, whilst the hydrothermal post-treatment led to an average mass loss of 3.8 % in surface densified specimens and of 4.1 % in control un-densified specimens. Furthermore, considerable fixation of compressive deformation was obtained by hydrothermal post-treatment at 200 °C.

Vorheriger Artikel The effect of process parameters on the hardness of surface densified Scots pine solid wood

Nächster Artikel Properties of one-layer experimental particleboards from willow (Salix viminalis) and industrial wood particles

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Blomberg J, Persson B, Bexell U (2006) Effects of semi-isostatic densification on anatomy and cell-shape recovery on soaking. Holzforschung 60:322–331CrossRef

Dwianto W, Morooka T, Norimoto M, Kitajima T (1999) Stress relaxation of sugi (Cryptomeria japonica D. Don) wood in radial compression under high temperature steam. Holzforschung 53:541–546CrossRef

Fang CH, Cloutier A, Blanchet P, Koubaa A, Mariotti N (2011) Densification of wood veneers combined with oil-heat treatment Part I: dimensional stability. Bioresourses 6:373–385

Garćia Esteban L, Gril J, de Palacios P, Guideneo Casaús A (2004) Reduction of wood hydroscopicity and associated dimensional response by repeated humidity cycles. Ann For Sci 62:275–284CrossRef

Heger F, Groux M, Girardet F, Welzbacher C, Rapp AO, Navi P (2004) Mechanical and durability performance of THM densified wood. In: Proceedings of the final workshop COST action E22 environmental optimisation of wood protection, Lisbon

Hillis WE (1984) High temperature and chemical effects on wood stability. Part 1: general considerations. Wood Sci Technol 18:281–293CrossRef

Hsu WE, Schwald W, Schwald J, Shields JA (1988) Chemical and physical changes required for producing dimensionally stable wood-based composites. Part I: steam pretreatment. Wood Sci Technol 22:281–289CrossRef

Inoue M, Norimoto M, Tanahashi M, Rowell RM (1993) Steam or heat fixation of compressed wood. Wood and Fiber Sci 25:224–235

Inoue M, Sekino N, Morooka T, Rowell RM, Norimoto M (2008) Fixation of compressive deformation in wood by pre-steaming. J Tropical Forest Sci 20:273–281

Kutnar A, Kamke FA (2012) Influence of temperature and steam environment on set recovery of compressive deformation of wood. Wood Sci Technol 46(5):953–964CrossRef

Kutnar A, Kamke FA, Sernek M (2009) Density profile and morphology of viscoelastic thermal compressed wood. Wood Sci Technol 43:57–68CrossRef

Kutnar A, Rautkari L, Laine K, Hughes M (2012) Thermodynamic characteristics of surface densified solid Scots pine wood. Eur J Wood Prod 5:727–734CrossRef

Morsing N (2000) Densification of wood—the influence of hygrothermal treatment on compression of beech perpendicular to the grain. Department of structural engineering and materials, Technical university of Denmark, Series R 79

Navi P, Girardet F (2000) Effects of thermo-hydro-mechanical treatment on the structure and properties of wood. Holzforschung 54:287–293CrossRef

Navi P, Heger F (2004) Combined densification and Thermo-Hydro- Mechanical processing of wood. Mater Res Society Bull, p.332–336

Norimoto M, Ota C, Akitsu H, Yamada T (1993) Permanent fixation of bending deformation in wood by heat treatment. Wood Res 79:23–33

Rautkari L, Hughes M (2009) Eliminating set-recovery in densified wood using a steam heat-treatment process. In: Proceedings of the 4th European conference on wood modification, Stockholm, Sweden

Rautkari L, Properzi M, Pichelin F, Hughes M (2010) Properties and set-recovery of surface densified Norway spruce and European beech. Wood Sci Technol 44:679–691CrossRef

Rautkari L, Laine K, Laflin N, Hughes M (2011) Surface modification of Scots pine: the effect of process parameters on the through thickness density profile. J Mater Sci 46:4780–4786CrossRef

Reynolds MS (2004) Hydro-thermal stabilization of wood-based materials. Master thesis, Virginia Tech

Statgraphics Plus version 5.0 (2000) Manugistics, Inc., Rockville

Wolcott MP, Shutler EL (2003) Temperature and moisture influence on compression—recovery behavior of wood. Wood Fiber Sci 35:540–551

Titel: Reducing the set-recovery of surface densified solid Scots pine wood by hydrothermal post-treatment
verfasst von: Kristiina Laine
Lauri Rautkari
Mark Hughes
Andreja Kutnar
Publikationsdatum: 01.01.2013
Verlag: Springer-Verlag
Erschienen in: European Journal of Wood and Wood Products / Ausgabe 1/2013
Print ISSN: 0018-3768
Elektronische ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-012-0647-2

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2013

Fire performances of foam core particleboards continuously produced in a one-step process

Finishing characteristics of heat treated and compressed Rubberwood

Mould resistance of Moso bamboo treated by two step heat treatment with different aqueous solutions

Enhancing MUF particleboard adhesives performance by glutaraldehyde addition

Tannin-furfuryl alcohol wood panel adhesives without formaldehyde

Effect of thermal treatment on the physical and mechanical properties of phyllostachys pubescen bamboo