nach oben

Applied Composite Materials

Erschienen in:

24.02.2021

A Review on the Kenaf Fiber Reinforced Thermoset Composites

verfasst von: Khurshid Malik, Faiz Ahmad, Ebru Gunister

Erschienen in: Applied Composite Materials | Ausgabe 2/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Plant fibers are becoming popular in polymer composites because of their eco-friendliness and natural availabilities at lower cost than synthetic fibers. The kenaf fiber as reinforcement has shown better specific properties than glass fiber because of its low density. Thus, it will be crucial in composite development for structural industrial components along with other natural and artificial fiber with thermoset polymer matrix. This paper presents a review of kenaf fiber reinforced thermoset composites (KFTCs) and their hybrids. First, a brief overview of the basic components of KFTCs, and detailed insight into the fabrication techniques and performance of KFTCs and their hybrids are presented. KFTCs and their hybrid composites are explored in detail, especially for the mechanical, thermal-physical, water absorption, and durability properties to provide the space to narrate the development of ideas and our current understanding of this research field. After that matrix modification and fiber modification as alternate solutions to improve performance of KFTCs and their hybrids are reviewed. Finally, the application and the future potential scope of KFTCs and their hybrids are addressed. It is anticipated that this review paper will become a reliable reference on the performance optimization of KFTCs and their hybrids.

Vorheriger Artikel Green Fabrication of Polyimide Fibers with Phosphate Monoester Network to Reinforce Carbon Nanotube Polymer Composites: Simultaneously improving the Mechanical Properties and Flame Retardancy

Nächster Artikel Numerical and Experimental Study of the Effects of Surface Temperature and Oxygen Mass Flux on the Ablation of Carbon–Carbon Composites

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Shah, D.U., Schubel, P.J., Licence, P., Clifford, M.J.: Hydroxyethylcellulose surface treatment of natural fibres: the new ‘twist’in yarn preparation and optimization for composites applicability. J. Mater. Sci. 47(6), 2700–2711 (2012). https://doi.org/10.1007/s10853-011-6096-1CrossRef

Carus, M.: Bio-composites: Technologies, applications and markets. In: 4th International Conference on Sustainable Materials, Polym. Compos. 2011, pp. 6–7

Reux, F.: Worldwide composites market: Main trends of the composites industry. 5th innovative composites summit-JEC ASIA 2012, 26–28 (2012).

Pothan, L.A., Oommen, Z., Thomas, S.: Dynamic mechanical analysis of banana fiber reinforced polyester composites. Compos. Sci. Technol. 63(2), 283–293 (2003)CrossRef

Bismarck, A., Mishra, S., Lampke, T.: Plant fibers as reinforcement for green composites. In: In A. K. Mohanty, M. Misra, & L. T. Drzal (Eds.), Natural Fibers, Bioploymers, and Biocomposites (p. 38). Boca Raton, FL: CRC Press. pp. 52–128. CRC Press, (2005)

Malik, K., Ahmad, F., Gunister, E.: Drilling Performance of Natural Fiber Reinforced Polymer Composites: A Review. J Nat Fibers, 1-19 (2021). https://doi.org/10.1080/15440478.2020.1870624

Rowell, R.M.: Natural fibres: types and properties. In: In K. L. Pickering (Ed.), Properties and Performance of Natural-Fibre Composites (pp. 3–66). Cambridge England: Woodhead Publishing Limited. (2008)

Rashdi, A.A.A., Sapuan, S.M., Ahmad, M., Abdan, K.B.: Review of kenaf fiber reinforced polymer composites. Polimery 54(11–12), 777–780 (2009)CrossRef

Yahaya, R., Sapuan, S., Jawaid, M., Leman, Z., Zainudin, E.: Review of kenaf reinforced hybrid biocomposites: potential for defence applications. Curr. Anal. Chem. 14(3), 226–240 (2018)CrossRef

10.

Ashori, A., Harun, J., Raverty, W.D., Yusoff, M.N.M.: Chemical and morphological characteristics of Malaysian cultivated kenaf (Hibiscus cannabinus) fiber. Polym.-Plast. Technol. Eng. 45(1), 131–134 (2006)CrossRef

11.

INFO: KENAF. https://naturalfibersinfo.org/?page_id=85 (2016). Accessed 11/9/2020 2020

12.

Adole, A.M., Yatim, J.M., Ramli, S.A., Othman, A., Mizal, N.A.: Kenaf Fibre and Its Bio-Based Composites: A Conspectus. Pertanika Journal of Science & Technology 27(1) (2019).

13.

Tholibona, D., Tharazia, I., Sulong, A., Muhamad, N., Ismail, N., Radzi, M.M., Radzuan, N.M., Hui, D.: Kenaf fiber composites: a review on synthetic and biodegradable polymer matrix. Jurnal Kejuruteraan 31(1), 65–76 (2019)

14.

Saba, N., Jawaid, M., Alothman, O.Y., Inuwa, I., Hassan, A.: A review on potential development of flame retardant kenaf fibers reinforced polymer composites. Polym. Adv. Technol. 28(4), 424–434 (2017)CrossRef

15.

Ramesh, M.: Kenaf (Hibiscus cannabinus L.) fibre based bio-materials: A review on processing and properties. Prog. Mater. Sci. 78, 1–92 (2016).

16.

Salman, S.D., Leman, Z., Sultan, M.T., Ishak, M.R., Cardona, F.: Kenaf/synthetic and Kevlar®/cellulosic fiber-reinforced hybrid composites: A review. BioResources 10(4), 8580–8603 (2015)CrossRef

17.

Lee, C., Salit, M.S., Hassan, M.: A review of the flammability factors of kenaf and allied fibre reinforced polymer composites. Adv. Mater. Sci. Eng. 2014 (2014).

18.

Thiruchitrambalam, M., Alavudeen, A., Venkateshwaran, N.: Review on kenaf fiber composites. Rev. Adv. Mater. Sci 32(2), 106–112 (2012)

19.

Nishimura, A., Katayama, H., Kawahara, Y., Sugimura, Y.: Characterization of kenaf phloem fibers in relation to stem growth. Ind. Crops Prod. 37(1), 547–552 (2012)CrossRef

20.

Aziz, S.H., Ansell, M.P., Clarke, S.J., Panteny, S.R.: Modified polyester resins for natural fibre composites. Compos. Sci. Technol. 65(3–4), 525–535 (2005)CrossRef

21.

Akil, H., Omar, M., Mazuki, A., Safiee, S., Ishak, Z.M., Bakar, A.A.: Kenaf fiber reinforced composites: A review. Mater Design 32(8–9), 4107–4121 (2011)CrossRef

22.

Karimi, S., Tahir, P.M., Karimi, A., Dufresne, A., Abdulkhani, A.: Kenaf bast cellulosic fibers hierarchy: a comprehensive approach from micro to nano. Carbohydr. Polym. 101, 878–885 (2014). https://doi.org/10.1016/j.carbpol.2013.09.106CrossRef

23.

Faruk, O., Bledzki, A.K., Fink, H.P., Sain, M.: Biocomposites reinforced with natural fibers: 2000–2010. Prog. Polym. Sci. 37(11), 1552–1596 (2012)CrossRef

24.

Paridah, M.T., Basher, A.B., SaifulAzry, S., Ahmed, Z.: Retting process of some bast plant fibres and its effect on fibre quality: A review. BioResources 6(4), 5260–5281 (2011)

25.

Rassmann, S., Reid, R., Paskaramoorthy, R.: Effects of processing conditions on the mechanical and water absorption properties of resin transfer moulded kenaf fibre reinforced polyester composite laminates. Compos. A Appl. Sci. Manuf. 41(11), 1612–1619 (2010)CrossRef

26.

Baillie, C.: Green composites: polymer composites and the environment. CRC Press, (2005)

27.

Saba, N., Paridah, M., Jawaid, M.: Mechanical properties of kenaf fibre reinforced polymer composite: A review. Constr. Build. Mater. 76, 87–96 (2015)CrossRef

28.

Bouguenina, O., Mokaddem, A., Doumi, B., Berber, M., Boutaous, A.: The Effect of the Kenaf Natural Fiber on Enhancing the Mechanical Properties of Bio-Composites Materials Used in Civil Engineering. Mechanics and Mechanical Engineering 22(1), 301 (2018). https://doi.org/10.2478/mme-2018-0026CrossRef

29.

Pickering, K.: Properties and performance of natural-fibre composites. Elsevier, (2008)

30.

Lau, K.T., Hung, P.Y., Zhu, M.H., Hui, D.: Properties of natural fibre composites for structural engineering applications. Compos. B Eng. 136, 222–233 (2018)CrossRef

31.

Chauhan, V., Kärki, T., Varis, J.: Review of natural fiber-reinforced engineering plastic composites, their applications in the transportation sector and processing techniques. J. Thermoplast. Compos. Mater. 0892705719889095 (2019).

32.

Nirmal, U., Hashim, J., Ahmad, M.M.: A review on tribological performance of natural fibre polymeric composites. Tribol. Int. 83, 77–104 (2015)CrossRef

33.

Guo, A., Sun, Z., Satyavolu, J.: Impact of chemical treatment on the physiochemical and mechanical properties of kenaf fibers. Ind. Crops Prod. 141, 111726 (2019). https://doi.org/10.1016/j.indcrop.2019.111726CrossRef

34.

Asim, M., Jawaid, M., Abdan, K., Ishak, M.R.: Effect of pineapple leaf fibre and kenaf fibre treatment on mechanical performance of phenolic hybrid composites. Fiber. Polym. 18(5), 940–947 (2017). https://doi.org/10.1007/s12221-017-1236-0CrossRef

35.

Koohestani, B., Darban, A.K., Mokhtari, P., Yilmaz, E., Darezereshki, E.: Comparison of different natural fiber treatments: a literature review. Int. J. Environ. Sci. Technol. 16(1), 629–642 (2019). https://doi.org/10.1007/s13762-018-1890-9CrossRef

36.

Safwan, A., Jawaid, M., Sultan, M.T., Hassan, A.: Preliminary study on tensile and impact properties of kenaf/bamboo fiber reinforced epoxy composites. Journal of Renewable Materials 6(5), 529–535 (2018)

37.

Fiore, V., Di Bella, G., Valenza, A.: The effect of alkaline treatment on mechanical properties of kenaf fibers and their epoxy composites. Compos. B Eng. 68, 14–21 (2015)CrossRef

38.

Bernard, M., Khalina, A., Ali, A., Janius, R., Faizal, M., Hasnah, K., Sanuddin, A.: The effect of processing parameters on the mechanical properties of kenaf fibre plastic composite. Mater Design 32(2), 1039–1043 (2011)CrossRef

39.

Lai, W., Mariatti, M., Jani S, M.: The properties of woven kenaf and betel palm (Areca catechu) reinforced unsaturated polyester composites. Polym.-Plast. Technol. Eng. 47(12), 1193–1199 (2008).

40.

Özturk, S.: Effect of Fiber Loading on the Mechanical Properties of Kenaf and Fiberfrax Fiber-reinforced Phenol-Formaldehyde Composites. J. Compos. Mater. 44(19), 2265–2288 (2010). https://doi.org/10.1177/0021998310364265CrossRef

41.

De Rosa, I.M., Santulli, C., Sarasini, F.: Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated Phormium tenax leaf fibers. Materials & Design (1980–2015) 31(5), 2397–2405 (2010).

42.

John, M.J., Anandjiwala, R.D.: Recent developments in chemical modification and characterization of natural fiber-reinforced composites. Polym. Compos. 29(2), 187–207 (2008). https://doi.org/10.1002/pc.20461CrossRef

43.

Rashdi, A., Sapuan, S., Ahmad, M., Khalina, A.: Water absorption and tensile properties of soil buried kenaf fibre reinforced unsaturated polyester composites (KFRUPC). J. Food Agric. Environ. (2009).

44.

Aji, I., Sapuan, S., Zainudin, E., Abdan, K.: Kenaf fibres as reinforcement for polymeric composites: a review. International Journal of Mechanical and Materials Engineering 4(3), 239–248 (2009)

45.

Karnani, R., Krishnan, M., Narayan, R.: Biofiber-reinforced polypropylene composites. Polym. Eng. Sci. 37(2), 476–483 (1997)CrossRef

46.

Shah, D.U.: Developing plant fibre composites for structural applications by optimising composite parameters: a critical review. J. Mater. Sci. 48(18), 6083–6107 (2013)CrossRef

47.

Summerscales, J., Dissanayake, N.P., Virk, A.S., Hall, W.: A review of bast fibres and their composites. Part 1–Fibres as reinforcements. Compos. A: Appl. Sci. Manuf. 41(10), 1329–1335 (2010).

48.

Al-Maadeed, M., Labidi, S.: Recycled polymers in natural fibre-reinforced polymer composites. In: Natural Fibre Composites. pp. 103–114. Elsevier, (2014)

49.

Mahjoub, R., Yatim, J.M., Mohd Sam, A.R., Hashemi, S.H.: Tensile properties of kenaf fiber due to various conditions of chemical fiber surface modifications. Constr. Build. Mater. 55, 103–113 (2014). https://doi.org/10.1016/j.conbuildmat.2014.01.036CrossRef

50.

Islam, M.S., Church, J.S., Miao, M.: Effect of removing polypropylene fibre surface finishes on mechanical performance of kenaf/polypropylene composites. Compos. A Appl. Sci. Manuf. 42(11), 1687–1693 (2011)CrossRef

51.

Abdullah, A., Khalina, A., Ali, A.: Effects of fiber volume fraction on unidirectional kenaf/epoxy composites: the transition region. Polym.-Plast. Technol. Eng. 50(13), 1362–1366 (2011)CrossRef

52.

Yan, L., Chouw, N., Jayaraman, K.: Flax fibre and its composites–A review. Compos. B Eng. 56, 296–317 (2014)CrossRef

53.

Ramnath, B.V., Manickavasagam, V.M., Elanchezhian, C., Krishna, C.V., Karthik, S., Saravanan, K.: Determination of mechanical properties of intra-layer abaca-jute-glass fiber reinforced composite. Mater Design 60, 643–652 (2014). https://doi.org/10.1016/j.matdes.2014.03.061CrossRef

54.

Huda, M.S., Drzal, L.T., Mohanty, A.K., Misra, M.: Effect of fiber surface-treatments on the properties of laminated biocomposites from poly (lactic acid)(PLA) and kenaf fibers. Compos. Sci. Technol. 68(2), 424–432 (2008)CrossRef

55.

Merlini, C., Soldi, V., Barra, G.M.: Influence of fiber surface treatment and length on physico-chemical properties of short random banana fiber-reinforced castor oil polyurethane composites. Polym. Testing 30(8), 833–840 (2011)CrossRef

56.

Zakikhani, P., Zahari, R., Sultan, M., Majid, D.: Extraction and preparation of bamboo fibre-reinforced composites. Mater Design 63, 820–828 (2014)CrossRef

57.

Ashori, A., Sheshmani, S., Farhani, F.: Preparation and characterization of bagasse/HDPE composites using multi-walled carbon nanotubes. Carbohydr. Polym. 92(1), 865–871 (2013)CrossRef

58.

Kamaruddin, N., Othman, M.S.H.J.I.J.o.G.E.: Quantifying of farmers’ acceptance and perception in developing kenaf, Hibiscus cannabinus, industry in Malaysia. 6(4), 401–416 (2012).

59.

Devadas, A., Nirmal, U., Hossen, J.: Investigation into mechanical & tribological performance of kenaf fibre particle reinforced composite. Cogent Engineering 5(1), 1479210 (2018). https://doi.org/10.1080/23311916.2018.1479210CrossRef

60.

Hassan, F., Zulkifli, R., Ghazali, M., Azhari, C.: Flexural Properties of Kenaf Fibre Mat Reinforced PLA Composites. J of Appl Envi and Bio Sci 7(1), 30–35 (2017)

61.

Ramasamy, M., Arul Daniel, A., Nithya, M., Sathees Kumar, S., Pugazhenthi, R.: Characterization of natural – Synthetic fiber reinforced epoxy based composite – Hybridization of kenaf fiber and kevlar fiber. Materials Today: Proceedings (2020). https://doi.org/10.1016/j.matpr.2020.07.243CrossRef

62.

Loos, M.R., Abetz, V., Schulte, K.J.P.I.: Fast and highly efficient one‐pot synthesis of polyoxadiazole/carbon nanotube nanocomposites in mild acid. 60(3), 517–528 (2011).

63.

Duc, F., Bourban, P.E., Plummer, C.J.G., Manson, J.A.E.: Damping of thermoset and thermoplastic flax fibre composites. Compos Part a-Appl S 64, 115–123 (2014). https://doi.org/10.1016/j.compositesa.2014.04.016CrossRef

64.

Fibreglass, N.: Differences between resins. http://www.nzfibreglass.co.nz/2015/images/differences%20between%20resins.pdf (2015). Accessed 01/09/2021 2015

65.

Ouarhim, W., Zari, N., Bouhfid, R., Qaiss, A.e.k.: 3 - Mechanical performance of natural fibers–based thermosetting composites. In: Jawaid, M., Thariq, M., Saba, N. (eds.) Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites. pp. 43–60. Woodhead Publishing, (2019)

66.

Loos, M.: Chapter 2 - Composites. In: Loos, M. (ed.) Carbon Nanotube Reinforced Composites, pp. 37–72. William Andrew Publishing, Oxford (2015)CrossRef

67.

Arnold, J.C.: 6.10 - Environmental Effects on Crack Growth in Composites. In: Milne, I., Ritchie, R.O., Karihaloo, B. (eds.) Comprehensive Structural Integrity. pp. 428–470. Pergamon, Oxford (2007)

68.

Davoodi, M., Sapuan, S., Ahmad, D., Ali, A., Khalina, A., Jonoobi, M.: Mechanical properties of hybrid kenaf/glass reinforced epoxy composite for passenger car bumper beam. Mater Design 31(10), 4927–4932 (2010)CrossRef

69.

Ismail, A.S., Jawaid, M., Naveen, J.: Void Content, Tensile, Vibration and Acoustic Properties of Kenaf/Bamboo Fiber Reinforced Epoxy Hybrid Composites. Materials (Basel) 12(13), 2094 (2019). https://doi.org/10.3390/ma12132094CrossRef

70.

Ismail, A.S., Jawaid, M., Sultan, M.T.H., Hassan, A.: Physical and Mechanical Properties of Woven Kenaf/Bamboo Fiber Mat Reinforced Epoxy Hybrid Composites. BioResources 14(1), 1390–1404 (2019)CrossRef

71.

Hanan, F., Jawaid, M., Md Tahir, P.: Mechanical performance of oil palm/kenaf fiber-reinforced epoxy-based bilayer hybrid composites. J Nat Fibers 17(2), 155–167 (2018). https://doi.org/10.1080/15440478.2018.1477083CrossRef

72.

Mohd Radzuan, N.A., Ismail, N.F., Fadzly Md Radzi, M.K., Razak, Z.B., Tharizi, I.B., Sulong, A.B., Che Haron, C.H., Muhamad, N.: Kenaf Composites for Automotive Components: Enhancement in Machinability and Moldability. Polymers (Basel) 11(10), 1707 (2019). https://doi.org/10.3390/polym11101707

73.

Yorseng, K., Rangappa, S.M., Pulikkalparambil, H., Siengchin, S., Parameswaranpillai, J.: Accelerated weathering studies of kenaf/sisal fiber fabric reinforced fully biobased hybrid bioepoxy composites for semi-structural applications: Morphology, thermo-mechanical, water absorption behavior and surface hydrophobicity. Constr. Build. Mater. 235, 117464 (2020)CrossRef

74.

Ren, X., Qiu, R., Li, K.: Modifications of kenaf fibers with N-methylol acrylamide for production of kenaf-unsaturated polyester composites. J. Appl. Polym. Sci. 125(4), 2846–2853 (2012). https://doi.org/10.1002/app.36424CrossRef

75.

Ren, X., Qiu, R., Fifield, L.S., Simmons, K.L., Li, K.: Effects of surface treatments on mechanical properties and water resistance of kenaf fiber-reinforced unsaturated polyester composites. J. Adhes. Sci. Technol. 26(18–19), 2277–2289 (2012)CrossRef

76.

Akil, H.M., De Rosa, I.M., Santulli, C., Sarasini, F.: Flexural behaviour of pultruded jute/glass and kenaf/glass hybrid composites monitored using acoustic emission. Mater. Sci. Eng., A 527(12), 2942–2950 (2010)CrossRef

77.

Akil, H.M., Santulli, C., Sarasini, F., Tirillò, J., Valente, T.: Environmental effects on the mechanical behaviour of pultruded jute/glass fibre-reinforced polyester hybrid composites. Compos. Sci. Technol. 94, 62–70 (2014)CrossRef

78.

Andre, N.G., Ariawan, D., Mohd Ishak, Z.A.: Mechanical properties and micromechanical analysis of nonwoven kenaf fibre/epoxy composites produced by resin transfer moulding. J. Compos. Mater. 51(13), 1875–1885 (2016). https://doi.org/10.1177/0021998316664197CrossRef

79.

Salman, S.D., Sharba, M.J., Leman, Z., Sultan, M.T.H., Ishak, M.R., Cardona, F.: Physical, Mechanical, and Morphological Properties of Woven Kenaf/Polymer Composites Produced Using a Vacuum Infusion Technique. Intl J of Poly Sci 2015, 894565 (2015). https://doi.org/10.1155/2015/894565CrossRef

80.

Saadati, Y., Lebrun, G., Chatelain, J.F., Beauchamp, Y.: Experimental investigation of failure mechanisms and evaluation of physical/mechanical properties of unidirectional flax–epoxy composites. J. Compos. Mater. 0(0), 0021998320902243. https://doi.org/10.1177/0021998320902243

81.

Fairuz, A.M., Sapuan, S.M., Zainudin, E.S., Jaafar, C.N.A.: The effect of gelation and curing temperatures on mechanical properties of pultruded kenaf fibre reinforced vinyl ester composites. Fiber Polym. 16(12), 2645–2651 (2015). https://doi.org/10.1007/s12221-015-5535-zCrossRef

82.

Fairuz, A.M., Sapuan, S.M., Zainudin, E.S., Jaafar, C.N.A.: The effect of pulling speed on mechanical properties of pultruded kenaf fiber reinforced vinyl ester composites. J. Vinyl Add. Tech. 24(S1), E13–E20 (2018). https://doi.org/10.1002/vnl.21552CrossRef

83.

Dan-mallam, Y., Hong, T.W., Abdul Majid, M.S.: Mechanical Characterization and Water Absorption Behaviour of Interwoven Kenaf/PET Fibre Reinforced Epoxy Hybrid Composite. International Journal of Polymer Science 2015, 1–13 (2015a). https://doi.org/10.1155/2015/371958CrossRef

84.

Khan, T., Sultan, M.T.H., Shah, A.U.M., Ariffin, A.H., Jawaid, M.: The Effects of Stacking Sequence on the Tensile and Flexural Properties of Kenaf/Jute Fibre Hybrid Composites. J. Nat. Fibers. 1–12 (2019). https://doi.org/10.1080/15440478.2019.1629148

85.

Khandai, S., Nayak, R., Kumar, A., Das, D., Kumar, R.: Assessment of Mechanical and Tribological Properties of Flax/Kenaf/Glass/Carbon Fiber Reinforced Polymer Composites. Materials Today: Proceedings 18, 3835–3841 (2019)

86.

Yahaya, R., Sapuan, S., Jawaid, M., Leman, Z., Zainudin, E.: Effect of fibre orientations on the mechanical properties of kenaf–aramid hybrid composites for spall-liner application. Defence Technology 12(1), 52–58 (2016a)CrossRef

87.

Hashemi, F., Tahir, P.M., Madsen, B., Jawaid, M., Majid, D.L., Brancheriau, L., Juliana, A.H.: Volumetric composition and shear strength evaluation of pultruded hybrid kenaf/glass fiber composites. J. Compos. Mater. 50(17), 2291–2303 (2015). https://doi.org/10.1177/0021998315602948CrossRef

88.

Zamri, M.H., Md Akil, H., Mohd Ishak, Z.A., Abu Bakar, A.: Effect of different fiber loadings and sizes on pultruded kenaf fiber reinforced unsaturated polyester composites. Polym. Compos. 36(7), 1224–1229 (2015). https://doi.org/10.1002/pc.23025CrossRef

89.

Hussein, M., Rozman, H., Tay, G.: The effect of kenaf fibre loadings on the properties of UV-cured unsaturated polyester composites. J. Reinf. Plast. Compos. 32(14), 1062–1071 (2013)CrossRef

90.

Yahaya, R., Sapuan, S.M., Jawaid, M., Leman, Z., Zainudin, E.S.: Mechanical performance of woven kenaf-Kevlar hybrid composites. J. Reinf. Plast. Compos. 33(24), 2242–2254 (2014). https://doi.org/10.1177/0731684414559864CrossRef

91.

P, S., Sellamuthu, P., Palanimuthu, L.: Influence of stacking sequence on mechanical properties of areca-kenaf fiber- reinforced polymer hybrid composite. J. Nat. Fibers, 1–13 (2020). https://doi.org/10.1080/15440478.2020.1745118

92.

Sanjay, M.R., Arpitha, G.R., Senthamaraikannan, P., Kathiresan, M., Saibalaji, M.A., Yogesha, B.: The Hybrid Effect of Jute/Kenaf/E-Glass Woven Fabric Epoxy Composites for Medium Load Applications: Impact, Inter-Laminar Strength, and Failure Surface Characterization. J. Nat. Fibers 16(4), 600–612 (2018). https://doi.org/10.1080/15440478.2018.1431828CrossRef

93.

Yahaya, R., Sapuan, S.M., Jawaid, M., Leman, Z., Zainudin, E.S.: Effect of layering sequence and chemical treatment on the mechanical properties of woven kenaf–aramid hybrid laminated composites. Mater Design 67, 173–179 (2015a). https://doi.org/10.1016/j.matdes.2014.11.024CrossRef

94.

Sathish, P., Kesavan, R., Ramnath, B.V., Vishal, C.: Effect of Fiber Orientation and Stacking Sequence on Mechanical and Thermal Characteristics of Banana-Kenaf Hybrid Epoxy Composite. Silicon 9(4), 577–585 (2015). https://doi.org/10.1007/s12633-015-9314-7CrossRef

95.

Ramesh, M., Nijanthan, S.: Mechanical property analysis of kenaf–glass fibre reinforced polymer composites using finite element analysis. Bull. Mater. Sci. 39(1), 147–157 (2016). https://doi.org/10.1007/s12034-015-1129-zCrossRef

96.

Yong, C.K., Ching, Y.C., Chuah, C.H., Liou, N.-S.: Effect of Fiber Orientation on Mechanical Properties of Kenaf-Reinforced Polymer Composite. 2015 10(2), 12 (2015).

97.

Jambari, S., Yahya, M.Y., Abdullah, M.R., Jawaid, M.: Woven Kenaf/Kevlar Hybrid Yarn as potential fiber reinforced for anti-ballistic composite material. Fiber Polym. 18(3), 563–568 (2017). https://doi.org/10.1007/s12221-017-6950-0CrossRef

98.

Davoodi, M., Sapuan, S., Ahmad, D., Aidy, A., Khalina, A., Jonoobi, M.: Effect of polybutylene terephthalate (PBT) on impact property improvement of hybrid kenaf/glass epoxy composite. Mater. Lett. 67(1), 5–7 (2012)CrossRef

99.

Yahaya, R., Sapuan, S.M., Jawaid, M., Leman, Z., Zainudin, E.S.: Water Absorption Behaviour and Impact Strength of Kenaf-Kevlar Reinforced Epoxy Hybrid Composites. Adv. Compos. Lett. 25(4), 096369351602500403 (2019). https://doi.org/10.1177/096369351602500403CrossRef

100.

Ahmad, S.H., Rasid, R., Bonnia, N.N., Zainol, I., Mamun, A.A., Bledzki, A.K., Beg, M.D.H.: Polyester-Kenaf Composites: Effects of Alkali Fiber Treatment and Toughening of Matrix Using Liquid Natural Rubber. J. Compos. Mater. 45(2), 203–217 (2010). https://doi.org/10.1177/0021998310373514CrossRef

101.

Dan-mallam, Y., Hong, T.W., Abdul Majid, M.S.: Mechanical Characterization and Water Absorption Behaviour of Interwoven Kenaf/PET Fibre Reinforced Epoxy Hybrid Composite. Intl J of Poly Sci 2015, 371958 (2015). https://doi.org/10.1155/2015/371958CrossRef

102.

Mohammed, A., Atiqah, M.N., Gopakumar, D.A., Fazita, M., Rizal, S., Hermawan, D., Thomas, S., Khalil, H.A.: Influence of layering pattern of modified kenaf fiber on thermomechanical properties of epoxy composites. Prog. Rubber Plast. Recycl. Technol. 1477760619895010 (2019).

103.

Nimanpure, S., Hashmi, S.A.R., Kumar, R., Bhargaw, H.N., Kumar, R., Nair, P., Naik, A.: Mechanical, electrical, and thermal analysis of sisal fibril/kenaf fiber hybrid polyester composites. Polym. Compos. 40(2), 664–676 (2017). https://doi.org/10.1002/pc.24706CrossRef

104.

Chee, S.S., Jawaid, M., Sultan, M., Alothman, O.Y., Abdullah, L.C.: Evaluation of the hybridization effect on the thermal and thermo-oxidative stability of bamboo/kenaf/epoxy hybrid composites. J. Therm. Anal. Calorim. 137(1), 55–63 (2019a)CrossRef

105.

Chee, S.S., Jawaid, M., Sultan, M.T.H.: Thermal Stability and Dynamic Mechanical Properties of Kenaf/Bamboo Fibre Reinforced Epoxy Composites. 2017 12(4), 15 (2017).

106.

Asim, M., Jawaid, M., Paridah, M.T., Saba, N., Nasir, M., Shahroze, R.M.: Dynamic and thermo-mechanical properties of hybridized kenaf/PALF reinforced phenolic composites. Polym. Compos. 40(10), 3814–3822 (2019). https://doi.org/10.1002/pc.25240CrossRef

107.

Guillou, J., Lavadiya, D.N., Munro, T., Fronk, T., Ban, H.: From lignocellulose to biocomposite: Multi-level modelling and experimental investigation of the thermal properties of kenaf fiber reinforced composites based on constituent materials. Appl. Therm. Eng. 128, 1372–1381 (2018). https://doi.org/10.1016/j.applthermaleng.2017.09.095CrossRef

108.

Mahmoudi, S., Kervoelen, A., Robin, G., Duigou, L., Daya, E., Cadou, J.: Experimental and numerical investigation of the damping of flax–epoxy composite plates. Compos Struct 208, 426–433 (2019)CrossRef

109.

Wei, C., Kukureka, S.: Evaluation of damping and elastic properties of composites and composite structures by the resonance technique. J. Mater. Sci. 35(15), 3785–3792 (2000)CrossRef

110.

Hashemi, F., Brancheriau, L., Tahir, P.M.: Hybridization and yarns configuration effects on flexural dynamic and static properties of pultruded hybrid kenaf/glass fiber composites. Compos. A Appl. Sci. Manuf. 112, 415–422 (2018). https://doi.org/10.1016/j.compositesa.2018.05.008CrossRef

111.

Ramamoorthy, S.K., Di, Q., Adekunle, K., Skrifvars, M.: Effect of water absorption on mechanical properties of soybean oil thermosets reinforced with natural fibers. J. Reinf. Plast. Compos. 31(18), 1191–1200 (2012)CrossRef

112.

Peijs, A., Van Melick, H., Garkhail, S., Pott, G., Baillie, C.: Natural-fibre-mat-reinforced thermoplastics based on upgraded flax fibres for improved moisture resistance. In: Proc. of the 8th Europ. Conf. on Composite Materials (ECCM-8), Science, Technology and Applications, Vol. 2 1998, pp. 119–126. Woodhead

113.

Hussein, M., Tay, G., Rozman, H.: Photo-fabricated unsaturated polyester resin composites reinforced by kenaf fibers, synthesis and characterization. J. Appl. Polym. Sci. 123(2), 968–976 (2012)CrossRef

114.

Yahaya, R., Sapuan, S.M., Jawaid, M., Leman, Z., Zainudin, E.S.: Water Absorption Behaviour and Impact Strength of Kenaf-Kevlar Reinforced Epoxy Hybrid Composites. Adv. Compos. Lett. 25(4), 096369351602500403 (2016). https://doi.org/10.1177/096369351602500403CrossRef

115.

Praveen Kumar, A., Nalla Mohamed, M.: A comparative analysis on tensile strength of dry and moisture absorbed hybrid kenaf/glass polymer composites. J. Ind. Text. 47(8), 2050–2073 (2017). https://doi.org/10.1177/1528083717720203CrossRef

116.

Mahendran, A.R., Wuzella, G., Aust, N., Müller, U., Kandelbauer, A.: Processing and Characterization of Natural Fibre Reinforced Composites Using Lignin Phenolic Binder. Polym. Polym. Compos. 21(4), 199–206 (2018). https://doi.org/10.1177/096739111302100401CrossRef

117.

Rashdi, A.A.A., Sapuan, S.M., Ahmad, M.M.H.M., Khalina, A.: The Effects of Weathering on Mechanical Properties of Kenaf Unsaturated Polyester Composites (KFUPC). Polym. Polym. Compos. 18(6), 337–343 (2018). https://doi.org/10.1177/096739111001800606CrossRef

118.

Zamri, M.H., Osman, M.R., Akil, H.M., Shahidan, M.H.A., Mohd Ishak, Z.A.: Development of green pultruded composites using kenaf fibre: influence of linear mass density on weathering performance. J. Clean. Prod. 125, 320–330 (2016). https://doi.org/10.1016/j.jclepro.2016.03.026

119.

Nosbi, N., Akil, H.M., Ishak, Z.M., Bakar, A.A.: Effect of water absorption on the mechanical properties of pultruded kenaf fibre reinforced polyester composites. Adv. Compos. Lett. 20(1), 096369351102000103 (2011)CrossRef

120.

Mazuki, A.A.M., Akil, H.M., Safiee, S., Ishak, Z.A.M., Bakar, A.A.: Degradation of dynamic mechanical properties of pultruded kenaf fiber reinforced composites after immersion in various solutions. Compos. B Eng. 42(1), 71–76 (2011). https://doi.org/10.1016/j.compositesb.2010.08.004CrossRef

121.

Mohammed, M., Rozyanty, A.R., Adam, T., Betar, B.O.: Study of the Weathering Effect in a Natural Environment on the Hybrid Kenaf Bast /Glass Fibre-Filled Unsaturated Polyester Composite. 3rd Electronic and Green Materials International Conference 2017 (Egm 2017) 1885 (2017). https://doi.org/10.1063/1.5002395

122.

Chee, S.S., Jawaid, M., Sultan, M., Alothman, O.Y., Abdullah, L.C.: Accelerated weathering and soil burial effects on colour, biodegradability and thermal properties of bamboo/kenaf/epoxy hybrid composites. Polym. Testing 79, 106054 (2019b)CrossRef

123.

Saba, N., Tahir, P.M., Jawaid, M.: A review on potentiality of nano filler/natural fiber filled polymer hybrid composites. Polymers 6(8), 2247–2273 (2014)CrossRef

124.

Njuguna, J., Pielichowski, K., Desai, S.: Nanofiller-reinforced polymer nanocomposites. Polym. Adv. Technol. 19(8), 947–959 (2008)CrossRef

125.

De Azeredo, H.M.: Nanocomposites for food packaging applications. Food Res. Int. 42(9), 1240–1253 (2009)CrossRef

126.

Borba, P.M., Tedesco, A., Lenz, D.M.: Effect of reinforcement nanoparticles addition on mechanical properties of SBS/Curauá fiber composites. Materials Research 17(2), 412–419 (2014)CrossRef

127.

Hári, J., Pukánszky, B.: Nanocomposites. In: Kutz, M. (ed.) Applied Plastics Engineering Handbook, pp. 109–142. William Andrew Publishing, Oxford (2011)CrossRef

128.

Mohammed, M., Betar, B.O., Rahman, R., Mohammed, A.M., Osman, A.F., Jaafar, M., Adam, T., Dahham, O.S., Hashim, U., Noriman, N.Z.: Zinc Oxide Nano Particles Integrated Kenaf/Unsaturated Polyester BioComposite. J of Renew Mtl 7(10), 967–982 (2019)CrossRef

129.

Arun Prakash, V.R., Viswanthan, R.: Fabrication and characterization of echinoidea spike particles and kenaf natural fibre-reinforced Azadirachta-Indica blended epoxy multi-hybrid bio composite. Compos. A Appl. Sci. Manuf. 118, 317–326 (2019). https://doi.org/10.1016/j.compositesa.2019.01.008CrossRef

130.

Parthipan, N., Ilangkumaran, M., Maridurai, T., Prasanna, S.C.: Effect of Silane Treated Silicon (IV) Oxide Nanoparticle Addition on Mechanical, Impact Damage and Drilling Characteristics of Kenaf Fibre-Reinforced Epoxy Composite. Silicon 12(2), 459–467 (2019). https://doi.org/10.1007/s12633-019-00138-0CrossRef

131.

Din, R.H., Musa, L., Aziz, A.A., Tay, G.-S.: Unsaturated polyester-kenaf composites: the effects of a modified montmorillonite filler on the tensile properties. Polym.-Plast. Technol. Eng. 49(9), 929–937 (2010)CrossRef

132.

Ding, Z., Shi, S.Q., Zhang, H., Cai, L.: Electromagnetic shielding properties of iron oxide impregnated kenaf bast fiberboard. Compos. B Eng. 78, 266–271 (2015)CrossRef

133.

Rozman, H.D., Musa, L., Azniwati, A.A., Rozyanty, A.R.: Tensile properties of kenaf/unsaturated polyester composites filled with a montmorillonite filler. J. Appl. Polym. Sci. 119(5), 2549–2553 (2011). https://doi.org/10.1002/app.32096CrossRef

134.

Saba, N., Paridah, M.T., Abdan, K., Ibrahim, N.A.: Effect of oil palm nano filler on mechanical and morphological properties of kenaf reinforced epoxy composites. Constr. Build. Mater. 123, 15–26 (2016). https://doi.org/10.1016/j.conbuildmat.2016.06.131CrossRef

135.

Saba, N., Alothman, O.Y., Almutairi, Z., Jawaid, M.: Magnesium hydroxide reinforced kenaf fibers/epoxy hybrid composites: mechanical and thermomechanical properties. Constr. Build. Mater. 201, 138–148 (2019)CrossRef

136.

Nurul Hidayah, I., Nuur Syuhada, D., Abdul Khalil, H.P.S., Ishak, Z.A.M., Mariatti, M.: Enhanced performance of lightweight kenaf-based hierarchical composite laminates with embedded carbon nanotubes. Mater Design 171, 107710 (2019). https://doi.org/10.1016/j.matdes.2019.107710

137.

Sapiai, N., Jumahat, A., Mahmud, J.: Mechanical properties of functionalised CNT filled kenaf reinforced epoxy composites. Materials Research Express 5(4), 045034 (2018). https://doi.org/10.1088/2053-1591/aabb63CrossRef

138.

Rosamah, E., Khalil H.P.S, A., Yap, S.W., Saurabh, C.K., Tahir, P.M., Dungani, R., Owolabi, A.F.: The Role of Bamboo Nanoparticles in Kenaf Fiber Reinforced Unsaturated Polyester Composites. Journal of Renewable Materials 6(1), 75–86 (2018). https://doi.org/10.7569/JRM.2017.634152

139.

Sabarinathan, P., Rajkumar, K., Annamalai, V.E., Vishal, K.: Static and dynamic behavior of micrometric agro Prunus amygdalus particulate distributed interpolymer layer-kenaf composite. Polym. Compos. 41(8), 3309–3321 (2020). https://doi.org/10.1002/pc.25621CrossRef

140.

Xia, C., Shi, S.Q., Cai, L.: Vacuum-assisted resin infusion (VARI) and hot pressing for CaCO3 nanoparticle treated kenaf fiber reinforced composites. Compos. B Eng. 78, 138–143 (2015). https://doi.org/10.1016/j.compositesb.2015.03.039CrossRef

141.

Mustapha, S.N.H., Aminuldin, A., Zakaria, S., Ramli, R.A., Salim, N., Roslan, R.: Mechanical and thermal properties of calcium carbonate filled kenaf reinforced unsaturated polyester/epoxidized palm oil composite. AIP Conf. Proc. 2030(1), 020190 (2018). https://doi.org/10.1063/1.5066831CrossRef

142.

Mohammed, M., Rozyanty, R., Mohammed, A.M., Osman, A.F., Adam, T., Dahham, O.S., Hashim, U., Noriman, N.Z., Betar, B.O.: Fabrication and Characterization of Zinc Oxide Nanoparticle-treated Kenaf Polymer Composites for Weather Resistance Based on a Solar UV Radiation. 2018 13(3), 17 (2018).

143.

Chai Hua, T., Norkhairunnisa, M.: Investigation on the Flexural Properties and Glass Transition Temperature of Kenaf/Epoxy Composite Filled with Mesoporous Silica for Wind Turbine Applications. Pertanika J of Sci & Tech 25(4) (2017).

144.

Mohan, T.P., Kanny, K.: Mechanical Properties and Failure Analysis of Short Kenaf Fibre Reinforced Composites Processed by Resin Casting and Vacuum Infusion Methods. Polym. Polym. Compos. 26(2), 189–204 (2018). https://doi.org/10.1177/096739111802600207CrossRef

145.

Razak, S.I.A., Rahman, W.A.W.A., Yahya, M.Y.: Hybrid composites of short acetylated kenaf bast fiber and conducting polyaniline nanowires in epoxy resin. J. Compos. Mater. 48(6), 667–676 (2013). https://doi.org/10.1177/0021998313476527CrossRef

146.

Razak, S.I.A., Rahman, W.A.W.A., Sharif, N.F.A., Nayan, N.H.M., Saidi, M.A.A., Yahya, M.Y.: Polyaniline-coated kenaf core and its effect on the mechanical and electrical properties of epoxy resin. Compos. Interface 20(8), 611–622 (2013). https://doi.org/10.1080/15685543.2013.821019CrossRef

147.

Ranjan, J.K., Goswami, S.: Effect of surface treatment of natural reinforcement on thermal and mechanical properties of vinyl ester/polyurethane interpenetrating polymer network-based biocomposites. J. Elastomers Plast. 0095244318819214 (2020).

148.

Ariawan, D., Salim, M.S., Mat Taib, R., Ahmad Thirmizir, M.Z., Mohammad Ishak, Z.A.: Durability of alkali and heat-treated kenaf fiber/unsaturated polyester composite fabricated by resin transfer molding under natural weathering exposure. Adv. Polym. Technol. 37(5), 1420–1434 (2018)CrossRef

149.

Ariawan, D., Mohd Ishak, Z., Mat Taib, R., Ahmad Thirmizir, M., Phua, Y.: Effect of heat treatment on properties of kenaf fiber mat/unsaturated polyester composite produced by Resin Transfer Molding. In: Applied Mechanics and Materials 2015, pp. 118–123. Trans Tech Publ

150.

Park, J.-M., Choi, J.-Y., Wang, Z.-J., Kwon, D.-J., Shin, P.-S., Moon, S.-O., DeVries, K.L.: Comparison of mechanical and interfacial properties of kenaf fiber before and after rice-washed water treatment. Compos. B Eng. 83, 21–26 (2015). https://doi.org/10.1016/j.compositesb.2015.08.042CrossRef

151.

Bakar, A., Ahmad, S., Kuntjoro, W.: The mechanical properties of treated and untreated kenaf fibre reinforced epoxy composite. J. Biobaased Mater. Bioenergy 4(2), 159–163 (2010)CrossRef

152.

Salim, M.S., Ariawan, D., Ahmad Rasyid, M.F., Ahmad Thirmizir, M.Z., Mat Taib, R., Mohd. Ishak, Z.A.: Effect of fibre surface treatment on interfacial and mechanical properties of non-woven kenaf fibre reinforced acrylic based polyester composites. Polym. Compos. 40(S1), E214-E226 (2019). https://doi.org/10.1002/pc.24605

153.

Ariawan, D., Mohd Ishak, Z.A., Salim, M.S., Mat Taib, R., Ahmad Thirmizir, M.Z., Pauzi, H.: The effect of alkalization on the mechanical and water absorption properties of nonwoven kenaf fiber/unsaturated polyester composites produced by resin-transfer molding. Polym. Compos. 37(12), 3516–3526 (2016). https://doi.org/10.1002/pc.23551CrossRef

154.

Asim, M., Jawaid, M., Abdan, K., Ishak, M.R.: Effect of Alkali and Silane Treatments on Mechanical and Fibre-matrix Bond Strength of Kenaf and Pineapple Leaf Fibres. J. Bionic Eng. 13(3), 426–435 (2016). https://doi.org/10.1016/S1672-6529(16)60315-3CrossRef

155.

Osman, M.R., Mazuki, A.A.M., Akil, H.M., Ishak, Z.A.M., Bakar, A.A.: Effect of chemical treatment on the mechanical properties of pultruded kenaf fibre reinforced polyester composites, vol. 594. Trans Tech Publ, (2014)

156.

Atiqah, A., Maleque, M.A., Jawaid, M., Iqbal, M.: Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications. Compos. B Eng. 56, 68–73 (2014). https://doi.org/10.1016/j.compositesb.2013.08.019CrossRef

157.

Nirmal, U., Lau, S.T., Hashim, J.: Interfacial adhesion characteristics of kenaf fibres subjected to different polymer matrices and fibre treatments. J of Compos 2014 (2014).

158.

Aziz, S.H., Ansell, M.P.: The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: part 2–cashew nut shell liquid matrix. Compos. Sci. Technol. 64(9), 1231–1238 (2004)CrossRef

159.

Mutasher, S.A., Poh, A., Than, A.M., Law, J.: The effect of alkali treatment mechanical properties of kenaf fiber epoxy composite. In: Key Engineering Materials 2011, pp. 191–196. Trans Tech Publ

160.

Farahani, G.N., Ahmad, I., Mosadeghzad, Z.: Effect of fiber content, fiber length and alkali treatment on properties of kenaf fiber/UPR composites based on recycled PET wastes. Polym.-Plast. Technol. Eng. 51(6), 634–639 (2012)CrossRef

161.

Nitta, Y., Goda, K., Noda, J., Lee, W.I.: Cross-sectional area evaluation and tensile properties of alkali-treated kenaf fibres. Compos. A Appl. Sci. Manuf. 49, 132–138 (2013). https://doi.org/10.1016/j.compositesa.2013.02.003CrossRef

162.

Thiruchitrambalam, M., Alavudeen, A., Athijayamani, A., Venkateshwaran, N., Perumal, A.E.: Improving mechanical properties of banana/kenaf polyester hybrid composites using sodium laulryl sulfate treatment. Mater. Phys. Mech. 8(2), 165–173 (2009)

163.

Alavudeen, A., Rajini, N., Karthikeyan, S., Thiruchitrambalam, M., Venkateshwaren, N.: Mechanical properties of banana/kenaf fiber-reinforced hybrid polyester composites: Effect of woven fabric and random orientation. Mater. Des. 1980–2015(66), 246–257 (2015)CrossRef

164.

Cho, D., Lee, H.S., Han, S.O.: Effect of fiber surface modification on the interfacial and mechanical properties of kenaf fiber-reinforced thermoplastic and thermosetting polymer composites. Compos. Interface 16(7–9), 711–729 (2009)CrossRef

165.

Agrebi, F., Hammami, H., Asim, M., Jawaid, M., Kallel, A.: Impact of silane treatment on the dielectric properties of pineapple leaf/kenaf fiber reinforced phenolic composites. J. Compos. Mater. 54(7), 937–946 (2020)CrossRef

166.

Asim, M., Paridah, M.T., Saba, N., Jawaid, M., Alothman, O.Y., Nasir, M., Almutairi, Z.: Thermal, physical properties and flammability of silane treated kenaf/pineapple leaf fibres phenolic hybrid composites. Compos. Struct. 202, 1330–1338 (2018). https://doi.org/10.1016/j.compstruct.2018.06.068CrossRef

167.

Khalil, H.P.S.A., Suraya, N.L., Atiqah, N., Jawaid, M., Hassan, A.: Mechanical and thermal properties of chemical treated kenaf fibres reinforced polyester composites. J. Compos. Mater. 47(26), 3343–3350 (2012). https://doi.org/10.1177/0021998312465026CrossRef

168.

Krishna, K.V., Kanny, K.: The effect of treatment on kenaf fiber using green approach and their reinforced epoxy composites. Compos. B Eng. 104, 111–117 (2016). https://doi.org/10.1016/j.compositesb.2016.08.010CrossRef

169.

Ren, X., Li, K.: Investigation of vegetable-oil-based coupling agents for kenaf-fiber-reinforced unsaturated polyester composites. J. Appl. Polym. Sci. 128(2), 1101–1109 (2013)CrossRef

170.

Ren, X., Li, C., Li, K.: Investigation of acrylamide-modified melamine-formaldehyde resins as a compatibilizer for kenaf-unsaturated polyester composites. Polym. Eng. Sci. 53(8), 1605–1613 (2013)CrossRef

171.

Chang, B.P., Chan, W.H., Zamri, M.H., Md Akil, H., Chuah, H.G.: Investigating the effects of operational factors on wear properties of heat-treated pultruded kenaf fiber-reinforced polyester composites using taguchi method. J. Nat. Fibers 16(5), 702–717 (2019)CrossRef

172.

Ariawan, D., Salim, M.S., Taib, R.M., Thirmizir, M.Z.A., Ishak, Z.A.M.: Interfacial characterisation and mechanical properties of heat treated non-woven kenaf fibre and its reinforced composites. Compos. Interface 25(2), 187–203 (2017). https://doi.org/10.1080/09276440.2017.1354562CrossRef

173.

Mansor, M.R., Sapuan, S.M., Zainudin, E.S., Nuraini, A.A., Hambali, A.: Hybrid natural and glass fibers reinforced polymer composites material selection using Analytical Hierarchy Process for automotive brake lever design. Mater Design 51, 484–492 (2013). https://doi.org/10.1016/j.matdes.2013.04.072CrossRef

174.

Yahaya, R., Sapuan, S.M., Jawaid, M., Leman, Z., Zainudin, E.S.: Effects of kenaf contents and fiber orientation on physical, mechanical, and morphological properties of hybrid laminated composites for vehicle spall liners. Polym. Compos. 36(8), 1469–1476 (2015b). https://doi.org/10.1002/pc.23053CrossRef

175.

Pang, C., Shanks, R.A., Daver, F.: Characterization of kenaf fiber composites prepared with tributyl citrate plasticized cellulose acetate. Compos. A Appl. Sci. Manuf. 70, 52–58 (2015). https://doi.org/10.1016/j.compositesa.2014.12.003CrossRef

176.

Sanjay, M., Yogesha, B.: Studies on hybridization effect of jute/kenaf/E-glass woven fabric epoxy composites for potential applications: Effect of laminate stacking sequences. J. Ind. Text. 47(7), 1830–1848 (2018)CrossRef

177.

Xue, Y., Du, Y., Elder, S., Wang, K., Zhang, J.: Temperature and loading rate effects on tensile properties of kenaf bast fiber bundles and composites. Compos. B Eng. 40(3), 189–196 (2009). https://doi.org/10.1016/j.compositesb.2008.11.009CrossRef

178.

Misri, S., Ishak, M.R., Sapuan, S.M., Leman, Z.: The effect of winding angles on crushing behavior of filament wound hollow kenaf yarn fibre reinforced unsaturated polyester composites. Fiber Polym. 16(10), 2266–2275 (2015). https://doi.org/10.1007/s12221-015-5447-yCrossRef

179.

Hafizah, N.A.K., Bhutta, M.A.R., Jamaludin, M.Y., Warid, M.H., Ismail, M., Rahman, M.S., Yunus, I., Azman, M.: Kenaf Fiber Reinforced Polymer Composites for Strengthening RC Beams. J. Adv. Concr. Technol. 12(6), 167–177 (2014). https://doi.org/10.3151/jact.12.167CrossRef

Titel: A Review on the Kenaf Fiber Reinforced Thermoset Composites
verfasst von: Khurshid Malik
Faiz Ahmad
Ebru Gunister
Publikationsdatum: 24.02.2021
Verlag: Springer Netherlands
Erschienen in: Applied Composite Materials / Ausgabe 2/2021
Print ISSN: 0929-189X
Elektronische ISSN: 1573-4897
DOI: https://doi.org/10.1007/s10443-021-09871-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2021

Sintering Temperature and Interphase Effects on Mechanical Properties of an Oxide Fiber-Reinforced Al2O3-SiO2 Composite Fabricated by Sol–Gel Method

Modeling the Effect of Oxidation on the Creep Behavior of SiC/PyC/SiC Mini-composites Under Wet Oxygen Atmosphere

Percolation Threshold of the Thermal, Electrical and Optical Properties of Carbonyl-Iron Microcomposites

Crashworthiness of Aluminum-Composite Hybrid Tubes

Green Fabrication of Polyimide Fibers with Phosphate Monoester Network to Reinforce Carbon Nanotube Polymer Composites: Simultaneously improving the Mechanical Properties and Flame Retardancy

A Pragmatic Approach for Modelling the Viscoelastic-Viscoplastic Behaviour of Short-Fibre Reinforced Thermoplastics Coupled with Anisotropic Damage

Premium Partner

Marktübersichten