nach oben

Cellulose

Erschienen in:

01.04.2013 | Original Paper

Eco-friendly synthesis, characterization and properties of a sodium carboxymethyl cellulose/graphene oxide nanocomposite film

verfasst von: Mithilesh Yadav, K. Y. Rhee, I. H. Jung, S. J. Park

Erschienen in: Cellulose | Ausgabe 2/2013

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A previously unreported nanocomposite (CMC/GO) high-performance film was prepared by a simple solution mixing-evaporation method. The structure, thermal stability, and mechanical properties of the composite films were investigated by wide-angle X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, scanning electron microscopy, thermogravimetry analysis, and mechanical testing. The results obtained from these different studies revealed that CMC and graphene oxide were able to form a homogeneous mixture. Compared with pure CMC, the tensile strength and Young’s modulus of the graphene-based materials were improved significantly upon incorporation of 1 wt% graphene oxide by 67 ± 6 % and 148 ± 5 %, respectively. In addition, the DMA composite films also showed a high storage modulus up to 250 °C.

Vorheriger Artikel Influence of the layered silicate type on the structure, morphology and properties of cellulose acetate nanocomposites

Nächster Artikel Preparation and characterization of cellulose-ZnO nanocomposite based on ionic liquid ([C4mim]Cl)

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Biswal DR, Singh RP (2004) Characterisation of carboxymethyl cellulose and polyacrylamide graft copolymer. Carbohydr Polym 57:379–387CrossRef

Chakraborty T, Chakraborty I, Ghosh S (2006) Sodium carboxymethylcellulose–CTAB interaction: a detailed thermodynamic study of polymer–surfactant interaction with opposite charges. Langmuir 22:9905–9913CrossRef

Chen C, Yang QH, Yang Y, Lv W, Wen Y, Hou PX, Wang M, Cheng HM (2009) Self-assembled free-standing graphite oxide membrane. Adv Mater 21:3007–3011CrossRef

Chen HH, Chen LC, Huang HC, Lin SB (2011) In situ modification of bacterial cellulose nanostructure by adding CMC during the growth of Gluconacetobacter xylinus. Cellulose 18:1573–1583CrossRef

Coleman JN, Khan U, Blau WJ, Gun’ko YK (2006) Small but strong: a review of the mechanical properties of carbon-nanotube-polymer composites. Carbon 44:1624–1652CrossRef

Dikin DA, Stankovich S, Zimney EJ, Piner RD, Dommett GHB, Evmenenko G, Nguyen ST, Ruoff RS (2007) Preparation and characterization of graphene oxide paper. Nature 448:457–460. doi:10.1038/nature06016 CrossRef

Doyle CD (1961) Estimating thermal stability of experimental polymers by empirical thermogravimetric analysis. Anal Chem 33:77CrossRef

Dufresne A, Dupeyre D, Vignon MR (2000) Cellulose microfibrils from potato tuber cells: processing and characterization of starch–cellulose microfibril composites. J Appl Polym Sci 76:2080–2092CrossRef

Fang M, Wang KG, Lu HB, Yang YL, Nutt S (2009) Covalent polymer functionalization of graphene nanosheets and mechanical properties of composites. J Mater Chem 19:7098–7105CrossRef

Feng LZ, Zhang SA, Liu ZA (2011) Graphene based gene transfection. Nanoscale 3:1252–1257CrossRef

Geim AK, Novoselov KS (2007) The rise of graphene. Nat Mater 6(3):183–191CrossRef

Gontard N, Guilbert S, Cuq JL (1993) Water and glycerol as plasticizers affect mechanical and water vapor barrier properties of an edible wheat film. J Food Sci 58:206–211CrossRef

Gonzalez CR, Hernández ALM, Castaño VM, Kharissova OV, Ruoff RS, Santos CV (2012) Polysaccharide nanocomposites reinforced with graphene oxide and keratin-grafted graphene oxide. Ind Eng Chem Res 51:3619–3629CrossRef

Hagenmaier RD, Shaw PE (1990) Moisture permeability of edible films made with fatty acids and hydroxypropyl methylcellulose. J Agri Food Chem 38:1799–1803CrossRef

Haigler CH, Brown RM Jr, Benziman M (1980) Calcofluor white ST alters the in vivo assembly of cellulose microfibrils. Science 210:903–906. doi:10.1126/science.7434003 CrossRef

Han D, Yan L, Chen W, Li W (2011a) Preparation of chitosan/graphene oxide composite film with enhanced mechanical strength in the wet state. Carbohydr Polym 83:653–658CrossRef

Han DL, Yan LF, Chen WF, Li W, Bangal PR (2011b) Cellulose/graphite oxide composite films with improved mechanical properties over a wide range of temperature. Carbohydr Polym 83:966–972CrossRef

Hao R, Qian W, Zhang LH, Hou YL (2008) Aqueous dispersions of TCNQ anion- stabilized graphene sheets. Chem Comm 48:6576–6578CrossRef

He Y, Zhang N, Gonga Q, Qiub H, Wang W, Liu Y, Gao J (2012) Alginate/graphene oxide fibers with enhanced mechanical strength prepared by wet spinning. Carbohydr Polym 88:1100–1108CrossRef

Hirai A, Tsuji M, Yamamoto H, Horii F (1998) In situ crystallization of bacterial cellulose III. Influences of different polymeric additives on the formation of microfibrils as revealed by transmission electron microscopy. Cellulose 5:201–213CrossRef

Hummers WS Jr, Offeman RE (1958) Preparation of graphite oxide. J Am Chem Soc 80:1339CrossRef

Li D, Kaner RB (2008) Graphene-based materials. Science 320:1170–1171CrossRef

Li D, Muller MB, Gilje S, Kaner RB, Wallace GG (2008) Processable aqueous dispersions of graphene nanosheets. Nat Nanotechnol 3:101–105CrossRef

Li R, Liu CH, Ma J (2011) Studies on the properties of graphene oxide-reinforced starch biocomposites. Carbohydr Polym 84:631–637CrossRef

Liang JJ, Huang Y, Zhang L, Wang Y, Ma YF, Guo TY et al (2009) Molecularlevel dispersion of graphene into poly (vinyl alcohol) and effective reinforcement of their nanocomposites. Adv Funct Mater 19:2297–2302CrossRef

Loos MR, Yang J, Feke DL, Manas-Zloczower I, Unal S, Younes U (2013) Enhancement of fatigue life of polyurethane composites containing carbon nanotubes. Compos Part B: Eng 44:740–744

Lourdin D, Della VG, Colonna P (1995) Influence of amylose content on starch films and foams. Carbohydr Polym 27:261–270CrossRef

Maftoonazad N, Ramaswamy HS, Marcotte M (2008) Shelf- life extension of peaches through sodium alginate and methyl cellulose edible coating. Int J Food Sci Technol 43:951–957. doi:10.1111/j.1365-2621.2006.01444.x CrossRef

Mao A, Zhang D, Jin X, Gu X, Wei X, Yang G, Liu X (2012) Synthesis of graphene oxide sheets decorated by silver nanoparticles in organic phase and their catalytic activity. J Phy Chem Solids 73:982–986CrossRef

Nie H, Liu M, Zhan F, Guo M (2004) Factors on the preparation of carboxymethycellulose hydrogel and its degradation behavior in soil. Carbohydr Polym 58:185–189CrossRef

Paredes JI, Villar-Rodil S, Martinez-Alonso A, Tascon JMD (2008) Graphene oxide dispersions in organic solvents. Langmuir 24:10560–10564CrossRef

Park HJ, Weller CL, Vergano PJ, Testin RF (1993) Permeability and mechanical properties of cellulose-based edible films. J Food Sci 58:1361–1364CrossRef

Park S, An JH, Piner RD, Jung I, Yang DX, Velamakanni A et al (2008) Aqueous suspension and characterization of chemically modified graphene sheets. Chem Mater 20:6592–6594CrossRef

Ramanathan T, Abdala AA, Stankovich S, Dikin DA, Herrera-Alonso M, Piner RD, Adamson DH, Schniepp HC, Chen X, Ruoff RS (2008) Functionalized graphene sheets for polymer nanocomposites. Nat Nanotechnol 3:327–331CrossRef

Rana VK, Choi MC, Kong JY, Kim GY, Kim MJ, Kim SH, Mishra S, Singh RP, Ha CS (2011) Synthesis and drug-delivery behavior of chitosan-functionalized graphene oxide hybrid nanosheets. Macro Mater Eng 296:131–140CrossRef

Rao CNR, Sood AK, Subrahmanyam KS, Govindaraj A (2009) Graphene: the new two-dimensional nanomaterial. Angew Chem Int Ed 48:7752–7777CrossRef

Rodil VS, Paredes JI, Martinez-Alonso A, Tascon JMD (2009) Preparation of graphene dispersions and graphene-polymer composites in organic media. J Mater Chem 19:3591–3593CrossRef

Stankovich S, Dikin DA, Dommett GHB, Kohlhaas KM, Zimney EJ, Stach EA et al (2006) Graphene-based composite materials. Nature 442(7100):282–286CrossRef

Tong Q, Xiao Q, Lim LT (2008) Preparation and properties of pullulan–alginate–carboxymethylcellulose blend films. Food Res Int 41:1007–1014. doi:10.1016/j.foodres.2008.08.005 CrossRef

Vyazovkin S, Sbirrazzuoli N (2006) Isoconversional kinetic analysis of thermally stimulated processes in polymers. Macromol Rapid Commun 27:1515–1532CrossRef

Wang S, Shen L, Zhang W, Tong Y (2005) Preparation and mechanical properties of chitosan/carbon nanotubes composites. Biomacromolecules 6:3067–3072CrossRef

Yadav M, Sand A, Behari K (2012) Synthesis and properties of a water soluble graft (chitosan-g-2-acrylamidoglycolic acid) copolymer. Int J Biol Macromol 50:1306–1314CrossRef

Yang L, Paulson AT (2000) Effect of lipids on mechanical and moisture barrier properties of edible gellan film. Food Res Int 33:571–578CrossRef

Yang X, Tu Y, Li L, Shang S, Tao XM (2010) Well-dispersed chitosan/graphene oxide nanocomposites. Appl mater interf 2:1707–1713CrossRef

Titel: Eco-friendly synthesis, characterization and properties of a sodium carboxymethyl cellulose/graphene oxide nanocomposite film
verfasst von: Mithilesh Yadav
K. Y. Rhee
I. H. Jung
S. J. Park
Publikationsdatum: 01.04.2013
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 2/2013
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-012-9855-5

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 2/2013

Nanoparticles from conventional cellulose esters: evaluation of preparation methods

Bacterial cellulose-MMTs nanoreinforced composite films: novel wound dressing material with antibacterial properties

Rheological characterization of high concentrated MFC gel from kenaf unbleached pulp

Fluorescence labeling of gelatin and methylcellulose: monitoring their penetration behavior into paper

Direct grafting modification of pulp in ionic liquids and self-assembly behavior of the graft copolymers

NMR spectroscopic studies on the mechanism of cellulose dissolution in alkali solutions