Skip to main content
Erschienen in: Metallurgical and Materials Transactions B 1/2020

02.12.2019

CFD Investigation of Effect of Multi-hole Ceramic Filter on Inclusion Removal in a Two-Strand Tundish

verfasst von: Qiang Wang, Yu Liu, Ao Huang, Wen Yan, Huazhi Gu, Guangqiang Li

Erschienen in: Metallurgical and Materials Transactions B | Ausgabe 1/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Multi-hole ceramic filter is regarded as an effective and cheap method of additional flow control device in tundish. In order to evaluate the performance of the ceramic filter, a transient three-dimensional (3D) comprehensive numerical model has been developed to study the flow pattern, temperature distribution and residence time of the molten steel, as well as the elimination of inclusion in a full size two-strand tundish. One-way coupled Euler–Lagrange approach with random walk model was adopted to track the inclusion motion trajectory. The gravity, buoyancy, drag, virtual mass, lift, pressure gradient, and rebound forces were included. The inclusion Reynolds number was utilized for the judgment of the inclusion separation at the slag-steel interface and the internal surface of the filter hole. Besides, the residence time distribution curve has been analyzed for figuring out the macroscopic mixing of the molten steel. The results indicate that the ceramic filter increases the flow resistance of the molten steel in the tundish, resulting in a longer residence time and a higher temperature drop. Except removed by the covering molten slag, the inclusion could also be trapped by the filter hole when the molten steel travels through the ceramic filter. The elimination of the smaller inclusion is significantly improved. The removal ratio of the 1 μm inclusion in the tundish without ceramic filter is only 59.3 pct, while the value is improved to 65.3 pct if we apply the ceramic filter with slenderness ratio of 3 to the tundish. And with the slenderness ratio changing from 3 to 5, the removal ratio of the 1 μm inclusion increases from 65.3 to 72.0 pct. Additionally, the ceramic filter could counteract certain side effects of the increasing inclusion density on the removal, especially for the smaller inclusion. With the inclusion density increasing from 3990 to 5000 kg/m3, the removal ratio of the 1 μm inclusion decreases by 14.5 pct in the tundish without ceramic filter, and after using the ceramic filter, the removal ratio decreases by 13.0, 7.4, and 5.0 pct with the slenderness ratio varies from 3 to 5.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat K. Chattopadhyay, M. Isac, and R.I.L. Guthrie: ISIJ Int., 2010, vol. 50 (3), pp. 331-348.CrossRef K. Chattopadhyay, M. Isac, and R.I.L. Guthrie: ISIJ Int., 2010, vol. 50 (3), pp. 331-348.CrossRef
2.
Zurück zum Zitat Q. Wang, F.S. Qi, B.K. Li, and F. Tsukihashi: ISIJ Int., 2014, vol. 54 (12), pp. 2796-2805.CrossRef Q. Wang, F.S. Qi, B.K. Li, and F. Tsukihashi: ISIJ Int., 2014, vol. 54 (12), pp. 2796-2805.CrossRef
3.
Zurück zum Zitat S. López-Ramirez, J. de Barreto, J. Palafox-Ramos, R.D. Morales, and D. Zacharias: Metall. Mater. Trans. B, 2001, vol. 32B (4), pp. 615-627.CrossRef S. López-Ramirez, J. de Barreto, J. Palafox-Ramos, R.D. Morales, and D. Zacharias: Metall. Mater. Trans. B, 2001, vol. 32B (4), pp. 615-627.CrossRef
4.
Zurück zum Zitat P.K. Jha, P.S. Rao, and A. Dewan: ISIJ Int., 2008, vol. 48 (2), pp. 154-160.CrossRef P.K. Jha, P.S. Rao, and A. Dewan: ISIJ Int., 2008, vol. 48 (2), pp. 154-160.CrossRef
5.
Zurück zum Zitat J.P. Rogler, L.J. Heaslip, and M. Mehrvar: Can. Metall. Quart., 2004, vol. 43 (3), pp. 407-415.CrossRef J.P. Rogler, L.J. Heaslip, and M. Mehrvar: Can. Metall. Quart., 2004, vol. 43 (3), pp. 407-415.CrossRef
6.
Zurück zum Zitat S. Neumann, A. Asad, T. Kasper, and R. Schwarze: Metall. Mater. Trans. B, 2019, vol. 50B (5), pp. 2334-2342.CrossRef S. Neumann, A. Asad, T. Kasper, and R. Schwarze: Metall. Mater. Trans. B, 2019, vol. 50B (5), pp. 2334-2342.CrossRef
7.
Zurück zum Zitat M.R.M. Yazdi, A.R.F. Khorasani, and S. Talebi: Can. Metall. Quart., 2019, vol. 58 (4), pp. 379-388.CrossRef M.R.M. Yazdi, A.R.F. Khorasani, and S. Talebi: Can. Metall. Quart., 2019, vol. 58 (4), pp. 379-388.CrossRef
8.
Zurück zum Zitat P Ni, LTI Jonsson, M Ersson, PG Jönsson (2017) Steel Res. Int., 83(3): 1600155.CrossRef P Ni, LTI Jonsson, M Ersson, PG Jönsson (2017) Steel Res. Int., 83(3): 1600155.CrossRef
9.
Zurück zum Zitat R. Mishra and D. Mazumdar: Trans. Indian Inst. Met., 2019, vol. 72 (4), pp. 889-898.CrossRef R. Mishra and D. Mazumdar: Trans. Indian Inst. Met., 2019, vol. 72 (4), pp. 889-898.CrossRef
10.
Zurück zum Zitat L.H. Wang, H.-G. Lee, and P. Hayes: ISIJ Int., 1996, vol. 36 (1), pp. 17-24.CrossRef L.H. Wang, H.-G. Lee, and P. Hayes: ISIJ Int., 1996, vol. 36 (1), pp. 17-24.CrossRef
11.
Zurück zum Zitat S. Ali, R. Mutharasan, and D. Apelian: Metall. Trans. B, 1985, vol. 16B (6), pp. 725-742.CrossRef S. Ali, R. Mutharasan, and D. Apelian: Metall. Trans. B, 1985, vol. 16B (6), pp. 725-742.CrossRef
12.
Zurück zum Zitat K. Yamada, T. Watanabe, K. Fukuda, T. Kawaragi, and T. Tashiro: Trans. ISIJ, 1987, vol. 27, pp. 873-877.CrossRef K. Yamada, T. Watanabe, K. Fukuda, T. Kawaragi, and T. Tashiro: Trans. ISIJ, 1987, vol. 27, pp. 873-877.CrossRef
13.
Zurück zum Zitat K. Janiszewski: Arch. Metall. Mater., 2013, vol. 58 (2), pp. 513-521.CrossRef K. Janiszewski: Arch. Metall. Mater., 2013, vol. 58 (2), pp. 513-521.CrossRef
14.
Zurück zum Zitat L. Bulkowski, U. Galisz, H. Kania, Z. Kudliński, J. Pieprzyca, and J. Barański: Arch. Metall. Mater., 2012, vol. 57 (1), pp. 363-369.CrossRef L. Bulkowski, U. Galisz, H. Kania, Z. Kudliński, J. Pieprzyca, and J. Barański: Arch. Metall. Mater., 2012, vol. 57 (1), pp. 363-369.CrossRef
15.
16.
Zurück zum Zitat M. Warzecha, T. Merder, P. Warzecha, and G. Stradomski: ISIJ Int., 2013, vol. 53 (11), pp. 1983-1992.CrossRef M. Warzecha, T. Merder, P. Warzecha, and G. Stradomski: ISIJ Int., 2013, vol. 53 (11), pp. 1983-1992.CrossRef
17.
Zurück zum Zitat H.-J. Odenthal, M. Javurek, and M. Kirschen: Steel Res. Int., 2009, vol. 80 (4), pp. 264-274. H.-J. Odenthal, M. Javurek, and M. Kirschen: Steel Res. Int., 2009, vol. 80 (4), pp. 264-274.
18.
Zurück zum Zitat H.-J. Odenthal, M. Javurek, M. Kirschen, and N. Vogl: Steel Res. Int., 2010, vol. 81 (7), pp. 529-541.CrossRef H.-J. Odenthal, M. Javurek, M. Kirschen, and N. Vogl: Steel Res. Int., 2010, vol. 81 (7), pp. 529-541.CrossRef
19.
Zurück zum Zitat M. Javurek, B. Kaufmann, G. Zuba, and P. Gittler: Steel Res., 2002, vol. 73 (5), pp. 186-193.CrossRef M. Javurek, B. Kaufmann, G. Zuba, and P. Gittler: Steel Res., 2002, vol. 73 (5), pp. 186-193.CrossRef
20.
Zurück zum Zitat E. Gutiérrez, S. Garcia-Hernandez, and J.J. Barreto: Steel Res. Int., 2019, p. 1900328. E. Gutiérrez, S. Garcia-Hernandez, and J.J. Barreto: Steel Res. Int., 2019, p. 1900328.
21.
22.
Zurück zum Zitat C. Chen: Doctoral thesis, KTH Royal Institute of Technology, Stockholm, Sweden, 2001, pp. 1–4. C. Chen: Doctoral thesis, KTH Royal Institute of Technology, Stockholm, Sweden, 2001, pp. 1–4.
23.
24.
Zurück zum Zitat Y. Miki and B.G. Thomas: Metall. Mater. Trans. B, 1999, vol. 30B (4), pp. 639-654.CrossRef Y. Miki and B.G. Thomas: Metall. Mater. Trans. B, 1999, vol. 30B (4), pp. 639-654.CrossRef
25.
Zurück zum Zitat L.F. Zhang, S. Taniguchi, and K.K. Cai: Metall. Mater. Trans. B, 2000, vol. 31B (2), pp. 253-266.CrossRef L.F. Zhang, S. Taniguchi, and K.K. Cai: Metall. Mater. Trans. B, 2000, vol. 31B (2), pp. 253-266.CrossRef
26.
Zurück zum Zitat K. Raghavendra, S. Sarkar, S.K. Ajmani, M.B. Denys, and M.K. Singh: Appl. Math. Model., 2013, vol. 37, pp. 6284-6300.CrossRef K. Raghavendra, S. Sarkar, S.K. Ajmani, M.B. Denys, and M.K. Singh: Appl. Math. Model., 2013, vol. 37, pp. 6284-6300.CrossRef
27.
Zurück zum Zitat J. Strandh, K. Nakajima, R. Eriksson, and P. Jönsson: ISIJ Int., 2005, vol. 45 (11), pp. 1597-1606.CrossRef J. Strandh, K. Nakajima, R. Eriksson, and P. Jönsson: ISIJ Int., 2005, vol. 45 (11), pp. 1597-1606.CrossRef
28.
Zurück zum Zitat C. Liu, S.F. Yang, J.S. Li, L.B. Zhu, and X.G. Li: Metall. Mater. Trans. B, 2016, vol. 47B (3), pp. 1882-1892.CrossRef C. Liu, S.F. Yang, J.S. Li, L.B. Zhu, and X.G. Li: Metall. Mater. Trans. B, 2016, vol. 47B (3), pp. 1882-1892.CrossRef
29.
Zurück zum Zitat M.J. Assael, K. Kakosimos, R.M. Banish, J. Brillo, I. Egry, R. Brooks, P.N. Quested, K.C. Mills, A. Nagashima, Y. Sato, and W.A. Wakeham (2006) J. Phys. Chem. Ref. Data, 35(1): 285-300.CrossRef M.J. Assael, K. Kakosimos, R.M. Banish, J. Brillo, I. Egry, R. Brooks, P.N. Quested, K.C. Mills, A. Nagashima, Y. Sato, and W.A. Wakeham (2006) J. Phys. Chem. Ref. Data, 35(1): 285-300.CrossRef
30.
Zurück zum Zitat T. Nishi, H. Shibata, H. Ohta, and Y. Waseda: Metall. Mater. Trans. A, 2003, vol. 34A (12), pp. 2801-2807.CrossRef T. Nishi, H. Shibata, H. Ohta, and Y. Waseda: Metall. Mater. Trans. A, 2003, vol. 34A (12), pp. 2801-2807.CrossRef
31.
Zurück zum Zitat S.F. Yang, J.S. Li, C. Liu, L.Y. Sun, and H.B. Yang: Metall. Mater. Trans. B, 2014, vol. 45B (6), pp. 2453-2463.CrossRef S.F. Yang, J.S. Li, C. Liu, L.Y. Sun, and H.B. Yang: Metall. Mater. Trans. B, 2014, vol. 45B (6), pp. 2453-2463.CrossRef
32.
Zurück zum Zitat Q. Wang, B.K. Li, and F. Tsukihashi: ISIJ Int., 2014, vol. 54 (2), pp. 311-320.CrossRef Q. Wang, B.K. Li, and F. Tsukihashi: ISIJ Int., 2014, vol. 54 (2), pp. 311-320.CrossRef
33.
Zurück zum Zitat K. Chattopadhyay, M. Isac, and R.I.L. Guthrie: ISIJ Int., 2012, vol. 52 (11), pp. 2026-2035.CrossRef K. Chattopadhyay, M. Isac, and R.I.L. Guthrie: ISIJ Int., 2012, vol. 52 (11), pp. 2026-2035.CrossRef
34.
Zurück zum Zitat Q. Wang, R.T. Wang, Z. He, G.Q. Li, B.K. Li, and H.B. Li: Int. J. Heat Mass Trans., 2018, vol. 125, pp. 1333-1344.CrossRef Q. Wang, R.T. Wang, Z. He, G.Q. Li, B.K. Li, and H.B. Li: Int. J. Heat Mass Trans., 2018, vol. 125, pp. 1333-1344.CrossRef
35.
Zurück zum Zitat B.G. Thomas, Q. Yuan, S. Mahmood, R. Liu, and R. Chaudhary: Metall. Mater. Trans. B, 2014, vol. 45B (1), pp. 22-35CrossRef B.G. Thomas, Q. Yuan, S. Mahmood, R. Liu, and R. Chaudhary: Metall. Mater. Trans. B, 2014, vol. 45B (1), pp. 22-35CrossRef
36.
Zurück zum Zitat D. Bouris and G. Bergeles: Metall. Mater. Trans. B, 1998, vol. 29B (3), pp. 641-649.CrossRef D. Bouris and G. Bergeles: Metall. Mater. Trans. B, 1998, vol. 29B (3), pp. 641-649.CrossRef
37.
Zurück zum Zitat J.K. Kim and P.K. Rohatgi: Metall. Mater. Trans. A, 1998, vol. 29A (1), pp. 351-358.CrossRef J.K. Kim and P.K. Rohatgi: Metall. Mater. Trans. A, 1998, vol. 29A (1), pp. 351-358.CrossRef
38.
Zurück zum Zitat K. Takahashi, M. Ando, and T. Ishii: ISIJ Int., 2014, vol. 54 (2), pp. 304-310.CrossRef K. Takahashi, M. Ando, and T. Ishii: ISIJ Int., 2014, vol. 54 (2), pp. 304-310.CrossRef
39.
Zurück zum Zitat U.D. Salgado, C. Weiβ, S.K. Michelic, and C. Bernhard: Metall. Mater. Trans. B, 2018, vol. 49B (4), pp. 1632-1643.CrossRef U.D. Salgado, C. Weiβ, S.K. Michelic, and C. Bernhard: Metall. Mater. Trans. B, 2018, vol. 49B (4), pp. 1632-1643.CrossRef
40.
Zurück zum Zitat C. Chen, L.T.I. Jonsson, A. Tilliander, G.G. Cheng, and P.G. Jönsson: Metall. Mater. Trans. B, 2015, vol. 46B (1), pp. 169-190.CrossRef C. Chen, L.T.I. Jonsson, A. Tilliander, G.G. Cheng, and P.G. Jönsson: Metall. Mater. Trans. B, 2015, vol. 46B (1), pp. 169-190.CrossRef
41.
Zurück zum Zitat C. Chen, L.T.I. Jonsson, A. Tilliander, G.G. Cheng, and P.G. Jönsson: Chem. Eng. Sci., 2015, vol. 137, pp. 914-937.CrossRef C. Chen, L.T.I. Jonsson, A. Tilliander, G.G. Cheng, and P.G. Jönsson: Chem. Eng. Sci., 2015, vol. 137, pp. 914-937.CrossRef
42.
43.
Zurück zum Zitat C. Chen, G.G. Cheng, H.B. Sun, Z.B. Hou, X.C. Wang, and J.Q. Zhang: Steel Res. Int., 2012, vol. 83 (12), pp. 1141-1151.CrossRef C. Chen, G.G. Cheng, H.B. Sun, Z.B. Hou, X.C. Wang, and J.Q. Zhang: Steel Res. Int., 2012, vol. 83 (12), pp. 1141-1151.CrossRef
44.
45.
Zurück zum Zitat J.H. Shin, Y. Ghung, and J.H. Park: Metall. Mater. Trans. B, 2017, vol. 48B (1), pp. 46-59.CrossRef J.H. Shin, Y. Ghung, and J.H. Park: Metall. Mater. Trans. B, 2017, vol. 48B (1), pp. 46-59.CrossRef
Metadaten
Titel
CFD Investigation of Effect of Multi-hole Ceramic Filter on Inclusion Removal in a Two-Strand Tundish
verfasst von
Qiang Wang
Yu Liu
Ao Huang
Wen Yan
Huazhi Gu
Guangqiang Li
Publikationsdatum
02.12.2019
Verlag
Springer US
Erschienen in
Metallurgical and Materials Transactions B / Ausgabe 1/2020
Print ISSN: 1073-5615
Elektronische ISSN: 1543-1916
DOI
https://doi.org/10.1007/s11663-019-01736-4

Weitere Artikel der Ausgabe 1/2020

Metallurgical and Materials Transactions B 1/2020 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.