Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
ATZ-Fachkongress

Chassis.tech plus 2024


4 Kongresse in einer Veranstaltung

Treffen Sie in München die Fachleute von Chassis, Lenkung, Bremsen sowie Reifen/Räder.
Erweiterte Suche
Anmelden
nach oben
Journal of Materials Engineering and Performance
Erschienen in: Journal of Materials Engineering and Performance 5/2019

09.05.2019

Effects of Heat Input on Weld-Bead Geometry, Surface Chemical Composition, Corrosion Behavior and Thermal Properties of Fiber Laser-Welded Nitinol Shape Memory Alloy

verfasst von: Partha Saha, Susmita Datta, Mohammad Shahid Raza, Dilip Kumar Pratihar

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 5/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Bead-on-plate laser welding was carried out on 1-mm-thick Nitinol sheets at different heat input values. The variations in weld-bead geometry and variations in microstructures across the bead were studied. The effects of heat input on surface layer composition of the welded samples, corrosion properties and phase transformation temperature were examined. From x-ray photoelectron spectroscopy (XPS), it was clear that relative intensity of elemental Ni peak was higher in parent material and the oxidation state of Ti was Ti4+. It was further observed from Auger electron spectroscopy (AES) that the Ti to Ni ratio on the top surface of the welded samples was more than 1, and as a result of this the stability of TiO2 layer was enhanced, which eventually helped to improve the corrosion property of the welded samples. The polarization resistance of the welded samples was increased by more than ten times compared to that of the un-welded samples. From differential scanning calorimetry (DSC), it became evident that phase transformation temperatures got changed due to welding.
Vorheriger Artikel Fabrication and Characterization of A5083-WC-Al2O3 Surface Composite by Friction Stir Processing
Nächster Artikel Prediction of Aging Kinetics and Yield Strength of 6063 Alloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
N.J. Nollu, H.W. Kerr, Y. Zhou, and J. Xie, Laser Weldability of Pt and Ti Alloys, Mater. Sci. Eng. A, 2005, 397(1-2), p 8–15CrossRef
2.
C. Maletta, A. Falvo, F. Furgiuele, G. Barbieri, and M. Brandizzi, Fracture Behaviour of Nickel-titanium Laser Welded Joints, J. Mater. Eng. Perform., 2009, 18(5-6), p 569–574CrossRef
3.
H. Gugel, A. Schuermann, and W. Theisen, Laser Welding of NiTi Wires, Mater. Sci. Eng. A, 2008, 481, p 668–671CrossRef
4.
B. Tam, M.I. Khan, and Y. Zhou, Mechanical and Functional Properties of Laser-welded Ti-55.8 Wt Pct Ni NiTinol Wires, Metall. Mater. Trans. A, 2011, 42(8), p 2166–2175CrossRef
5.
C.W. Chan and H.C. Man, Laser Welding of Thin Foil Nickel-Titanium Shape Memory Alloy, Opt. Lasers Eng., 2011, 49(1), p 121–126CrossRef
6.
C.W. Chan, H.C. Man, and T.M. Yue, Effects of Process Parameters upon the Shape Memory and Pseudo-elastic Behaviors of Laser-welded NiTi Thin Foil, Metall. Mater. Trans. A, 2011, 42(8), p 2264–2270CrossRef
7.
M. Dadfar, M.H. Fathi, F. Karimzadeh, M.R. Dadfar, and A. Saatchi, Effect of TIG Welding on Corrosion Behavior of 316L Stainless steel, Mater. Lett., 2007, 61(11-12), p 2343–2346CrossRef
8.
N. Amanat, N.L. James, and D.R. McKenzie, Welding Methods for Joining Thermoplastic Polymers for the Hermetic Enclosure of Medical Devices, Med. Eng. Phys., 2010, 32(7), p 690–699CrossRef
9.
M.F. Nichols, The Challenges for Hermetic Encapsulation of Implanted Devices - a Review, Crit. Rev. Biomed. Eng., 1994, 22(1), p 39–67
10.
W.H. Ko, Packaging of Microfabricated Devices and Systems, Mater. Chem. Phys., 1995, 42(3), p 169–175CrossRef
11.
I. Milošev, T. Kosec, and H.H. Strehblow, XPS and EIS Study of The Passive Film Formed on Orthopaedic Ti-6Al-7Nb Alloy in Hank’s Physiological Solution, Electrochim. Acta, 2008, 53(9), p 3547–3558CrossRef
12.
J.C. Wataha, N.L. O’Dell, B.B. Singh, M. Ghazi, G.M. Whitford, and P.E. Lockwood, Relating Nickel-induced Tissue Inflammation to Nickel release in Vivo, J. Biomed. Mater. Res. Part A, 2001, 58(5), p 537–544CrossRef
13.
L. Peltonen, Nickel Sensitivity in the General Population, Contact Dermatitis, 1979, 5(1), p 27–32CrossRef
14.
C.L. Dunlap, S.K. Vincent, and B.F. Barker, Allergic Reaction to Orthodontic Wire: Report of Case, J. Am. Dental Assoc., 1989, 118(4), p 449–450CrossRef
15.
G. Rondelli, B. Vicentini, and A. Cigada, The Corrosion Behaviour of Nickel Titanium Shape Memory Alloys, Corros. Sci., 1990, 30(8-9), p 805–812CrossRef
16.
G. Rondelli, Corrosion Resistance Tests on NiTi Shape Memory Alloy, Biomaterials, 1996, 17(20), p 2003–2008CrossRef
17.
S.A. Shabalovskaya, G.C. Rondelli, A.L. Undisz, J.W. Anderegg, T.D. Burleigh, and M.E. Rettenmayr, The Electrochemical Characteristics of Native Nitinol Surfaces, Biomaterials, 2009, 30(22), p 3662–3671CrossRef
18.
T. Kanemura, K.I. Yokoyama, and J.I. Sakai, Effects of Acid Type on Corrosion and Fracture Behavior of Ni-Ti Superelastic Alloy Under Sustained Tensile Load in Physiological Saline Solution Containing Hydrogen Peroxide, Corros. Sci., 2008, 50(10), p 2785–2795CrossRef
19.
Y. Okazaki and E. Gotoh, Metal Release from Stainless Steel, Co-Cr-Mo-Ni-Fe and Ni-Ti Alloys in Vascular Implants, Corros. Sci., 2008, 50(12), p 3429–3438CrossRef
20.
N. Figueira, T.M. Silva, M.J. Carmezim, and J.C.S. Fernandes, Corrosion Behaviour of NiTi Alloy, Electrochim. Acta, 2009, 54(3), p 921–926CrossRef
21.
Z.D. Cui, H.C. Man, and X.J. Yang, The Corrosion and Nickel Release Behavior of Laser Surface-melted NiTi Shape Memory Alloy in Hanks’ Solution, Surf. Coat. Technol., 2005, 192(2-3), p 347–353CrossRef
22.
D. Starosvetsky and I. Gotman, Corrosion Behavior of Titanium Nitride Coated Ni-Ti Shape Memory Surgical Alloy, Biomaterials, 2001, 22(13), p 1853–1859CrossRef
23.
C. Liu, P.K. Chu, G. Lin, and D. Yang, Effects of Ti/TiN Multilayer on Corrosion Resistance of Nickel-Titanium Orthodontic Brackets in Artificial Saliva, Corros. Sci., 2007, 49(10), p 3783–3796CrossRef
24.
25.
Y.T. Hsu, Y.R. Wang, S.K. Wu, and C. Chen, Effect of CO2 Laser Welding on the Shape-memory and Corrosion Characteristics of TiNi Alloys, Metall. Mater. Trans. A, 2001, 32(3), p 569–576CrossRef
26.
S.A. Shabalovskaya, H. Tian, J.W. Anderegg, D.U. Schryvers, W.U. Carroll, and J. Van Humbeeck, The Influence of Surface Oxides on the Distribution and Release of Nickel from Nitinol Wires, Biomaterials, 2009, 30(4), p 468–477CrossRef
27.
S.A. Shabalovskaya, Surface, Corrosion and Biocompatibility Aspects of Nitinol as an Implant Material, Bio-med. Mater. Eng., 2002, 12(1), p 69–109
28.
S. Shabalovskaya, J. Anderegg, and J. Van Humbeeck, Critical Overview of Nitinol Surfaces and Their Modifications for Medical Applications, Acta Biomater., 2008, 4(3), p 447–467CrossRef
29.
S. Shabalovskaya, J. Anderegg, G. Rondelli, W. Vanderlinden, and S. De Feyter, Comparative in Vitro performances of Bare Nitinol Surfaces, Bio-Med. Mater. Eng., 2008, 18(1), p 1–14
30.
C.W. Chan, H.C. Man, and T.M. Yue, Effect of Post-weld Heat-treatment on the Oxide Film and Corrosion Behaviour of Laser-welded Shape Memory NiTi Wires, Corros. Sci., 2012, 56, p 158–167CrossRef
31.
A. Tuissi, S. Besseghini, T. Ranucci, F. Squatrito, and M. Pozzi, Effect of Nd-YAG Laser Welding on the Functional Properties of the Ni-49.6 at.% Ti, Mater. Sci. Eng. A, 1999, 273, p 813–817CrossRef
32.
A. Falvo, F.M. Furgiuele, and C. Maletta, Functional Behaviour of a NiTi-welded Joint: Two-way Shape Memory Effect, Mater. Sci. Eng. A, 2008, 481, p 647–650CrossRef
33.
J.P. Oliveira, R.M. Miranda, N. Schell, and F.B. Fernandes, High Strain and Long Duration Cycling Behavior of Laser Welded NiTi Sheets, Int. J. Fatigue, 2016, 83, p 195–200CrossRef
34.
A. Falvo, F.M. Furgiuele, and C. Maletta, Laser Welding of a NiTi alloy: Mechanical and Shape memory Behaviour, Mater. Sci. Eng. A, 2005, 412(1-2), p 235–240CrossRef
35.
L.A. Vieira, F.B. Fernandes, R.M. Miranda, R.J.C. Silva, L. Quintino, A. Cuesta, and J.L. Ocaña, Mechanical Behaviour of Nd: YAG Laser Welded Superelastic NiTi, Mater. Sci. Eng. A, 2011, 528(16-17), p 5560–5565CrossRef
36.
G.R. Mirshekari, A. Kermanpur, A. Saatchi, S.K. Sadrnezhaad, and A.P. Soleymani, Microstructure, Cyclic Deformation and Corrosion Behavior of Laser Welded NiTi shape Memory Wires, J. Mater. Eng. Perform., 2015, 24(9), p 3356–3364CrossRef
37.
Z. Zeng, M. Yang, J.P. Oliveira, D. Song, and B. Peng, Laser Welding of NiTi Shape Memory Alloy Wires and Tubes for Multi-functional Design Applications, Smart Mater. Struct., 2016, 25(8), p 085001CrossRef
38.
J.P. Oliveira, F.B. Fernandes, R.M. Miranda, N. Schell, and J.L. Ocaña, Effect of Laser Welding Parameters on the Austenite and Martensite Phase Fractions of NiTi, Mater. Charact., 2016, 119, p 148–151CrossRef
39.
J.P. Oliveira, F.B. Fernandes, R.M. Miranda, N. Schell, and J.L. Ocaña, Residual Stress Analysis in Laser Welded NiTi Sheets Using Synchrotron X-ray Diffraction, Mater. Des., 2016, 100, p 180–187CrossRef
40.
J.P. Oliveira, D. Barbosa, F.B. Fernandes, and R.M. Miranda, Tungsten Inert Gas (TIG) Welding of Ni-rich NiTi Plates: Functional Behavior, Smart Mater. Struct., 2016, 25(3), p 03LT01CrossRef
41.
A. Ikai, K. Kimura, and H. Tobushi, TIG Welding and Shape Memory Effect of TiNi Shape Memory Alloy, J. Intell. Mater. Syst. Struct., 1996, 7(6), p 646–655CrossRef
42.
W. Zhang, S.S. Ao, J.P. Oliveira, Z. Zeng, Z. Luo, and Z.Z. Hao, Corrigendum: Effect of Ultrasonic Spot Welding on the Mechanical Behaviour of NiTi Shape Memory Alloys, Smart Mater. Struct., 2018, 27(10), p 109501CrossRef
43.
S.M. Prabu, H.C. Madhu, C.S. Perugu, K. Akash, P.A. Kumar, S.V. Kailas, M. Anbarasu, and I.A. Palani, Microstructure, Mechanical Properties and Shape Memory Behaviour of Friction Stir Welded Nitinol, Mater. Sci. Eng. A, 2017, 693, p 233–236CrossRef
44.
S.M. Prabu, H.C. Madhu, C.S. Perugu, K. Akash, R. Mithun, P.A. Kumar, S.V. Kailas, M. Anbarasu, and I.A. Palani, Shape Memory Effect, Temperature Distribution and Mechanical Properties of Friction Stir Welded Nitinol, J. Alloys Compd., 2019, 776, p 334–345CrossRef
45.
Z. Zeng, B. Panton, J.P. Oliveira, A. Han, and Y.N. Zhou, Dissimilar Laser Welding of NiTi Shape Memory Alloy and Copper, Smart Mater. Struct., 2015, 24(12), p 125036CrossRef
46.
J.P. Oliveira, Z. Zeng, C. Andrei, F.B. Fernandes, R.M. Miranda, A.J. Ramirez, T. Omori, and N. Zhou, Dissimilar Laser Welding of Superelastic NiTi and CuAlMn Shape Memory Alloys, Mater. Des., 2017, 128, p 166–175CrossRef
47.
R.M. Miranda, E. Assunção, R.J. Silva, J.P. Oliveira, and L. Quintino, Fiber Laser Welding of NiTi to Ti-6Al-4V, Int. J. Adv. Manuf. Technol., 2015, 81(9-12), p 1533–1538CrossRef
48.
Z. Zeng, J.P. Oliveira, M. Yang, D. Song, and B. Peng, Functional Fatigue Behavior of NiTi-Cu Dissimilar Laser Welds, Mater. Des., 2017, 114, p 282–287CrossRef
49.
J.P. Oliveira, B. Panton, Z. Zeng, C.M. Andrei, Y. Zhou, R.M. Miranda, and F.B. Fernandes, Laser Joining of NiTi to Ti6Al4 V Using a Niobium Interlayer, Acta Mater., 2016, 105, p 9–15CrossRef
50.
M. Daly, A. Pequegnat, Y.N. Zhou, and M.I. Khan, Fabrication of a Novel Laser-Processed NiTi Shape Memory Microgripper with Enhanced Thermomechanical Functionality, J. Intell. Mater. Syst. Struct., 2013, 24(8), p 984–990CrossRef
51.
B. Panton, J.P. Oliveira, Z. Zeng, Y.N. Zhou, and M.I. Khan, Thermomechanical Fatigue of Post-weld Heat Treated NiTi Shape Memory Alloy Wires, Int. J. Fatigue, 2016, 92, p 1–7CrossRef
52.
R. Chakraborty, V.S. Seesala, M. Sen, S. Sengupta, S. Dhara, P. Saha, K. Das, and S. Das, MWCNT Reinforced Bone Like Calcium Phosphate—Hydroxyapatite Composite Coating Developed Through Pulsed Electrodeposition with Varying Amount of Apatite Phase and Crystallinity to Promote Superior Osteoconduction, Cytocompatibility and Corrosion Protection Performance Compared to Bare Metallic Implant Surface, Surf. Coat. Technol., 2017, 325, p 496–514CrossRef
53.
J.F. Moulder, W.F. Stickle, P.E. Sobol, and K.D. Bomben, Handbook of X-Ray Photoelectron Spectroscopy, Perkin-Elmer Corporation, Eden Prairie, MN, 1992
54.
A. Pequegnat, A. Michael, J. Wang, K. Lian, Y. Zhou, and A.N.D.M.I. Khan, Surface Characterizations of Laser modified Biomedical Grade NiTi Shape Memory Alloys, Mater. Sci. Eng. C, 2015, 50, p 367–378CrossRef
55.
H.C. Man, Z.D. Cui, and A.N.D.T.M. Yue, Corrosion Properties of Laser Surface Melted NiTi Shape Memory Alloy, Scr. Mater., 2001, 45(12), p 1447–1453CrossRef
56.
M.I. Khan and Y. Zhou, Effects of Local Phase Conversion on the Tensile Loading of Pulsed Nd: YAG Laser Processed Nitinol, Mater. Sci. Eng. A, 2010, 527(23), p 6235–6238CrossRef
57.
W.J. Lorenz and F. Mansfeld, Determination of Corrosion Rates by Electrochemical DC and AC Methods, Corros. Sci., 1981, 21(9-10), p 647–672CrossRef
58.
J. Frenzel, E.P. George, A. Dlouhy, C. Somsen, M.X. Wagner, and G. Eggeler, Influence of Ni on Martensitic Phase Transformations in NiTi Shape Memory Alloys, Acta Mater., 2010, 58(9), p 3444–3458CrossRef
Metadaten
Titel
Effects of Heat Input on Weld-Bead Geometry, Surface Chemical Composition, Corrosion Behavior and Thermal Properties of Fiber Laser-Welded Nitinol Shape Memory Alloy
verfasst von
Partha Saha
Susmita Datta
Mohammad Shahid Raza
Dilip Kumar Pratihar
Publikationsdatum
09.05.2019
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 5/2019
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-019-04077-0

Weitere Artikel der Ausgabe 5/2019

Journal of Materials Engineering and Performance 5/2019 Zur Ausgabe

OriginalPaper

Effect of Micro-Arc Oxidation on Friction–Wear Behavior of Cold-Sprayed Al Coating in 3.5 wt.% NaCl Solution

OriginalPaper

Effect of Through-Thickness Friction Stir Processing Parameters on Weld Repair and Modification of Fusion-Welded AA6061 Aluminum Alloy

OriginalPaper

Analysis of the Temperature Field in Al-Cu Dissimilar Materials Friction Stir Welding

OriginalPaper

Effects of Annealing on the Microstructures and Mechanical Properties of Cold-Rolled TB8 Alloy

OriginalPaper

Effect of MgCl2 on the Corrosion Behavior of Copper Under Periodic Wet/Dry Cycle Condition

OriginalPaper

Microstructure, Texture, and Mechanical Properties of AM60 Magnesium Alloy Processed by Extrusion and Multidirectional Forging

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise