nach oben

Journal of Material Cycles and Waste Management

Erschienen in:

15.03.2018 | ORIGINAL ARTICLE

Utilization of iron ore tailing for the synthesis of zeolite A by hydrothermal method

verfasst von: Changquan Zhang, Suqin Li

Erschienen in: Journal of Material Cycles and Waste Management | Ausgabe 3/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The iron ore tailing (IOT) is an industrial waste, in which large accumulations represent a serious environmental threat. To reduce the environmental burden and improve the economic benefits, the science and industry focus on the transformation of IOT into new functional materials. In this study, the zeolite A was synthesized from IOT without acid leaching purification. The IOT and zeolite A were studied by XRD, XRF, XPS, SEM, and simply BET. As a result of the hydrothermal reaction, zeolite A was synthesized from the IOT. It was shown that the experimental conditions (SiO₂/Al₂O₃, Na₂O/SiO_2, and H₂O/Na₂O) have a significant influence on the type of zeolite and its content in the synthetic products. The calcium ion-exchange capacity and the BET surface area of zeolite A product closely similar to that of the commercial 4A zeolite and superior to the zeolite A synthesized by traditional method discussed in this paper. The research result indicates that the zeolite A can be prepared from IOT and it can be reduce calcium ion as water softener.

Vorheriger Artikel Effect of pressure and atmosphere during hydrothermal treatment on the properties of sewage sludge-derived solid fuel

Nächster Artikel Analysis of waste-to-energy conversion efficiencies based on different estimation methods in Seoul area

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Glavic P, Lukman R (2007) Review of sustainability terms and their definitions. J Clean Prod 15:1875–1885CrossRef

Jegatheesan V, Liow JL, Shu L, Kim SH, Visvanathan C (2009) The need for global coordination in sustainable development. J Clean Prod 17:637–643CrossRef

Duan P, Yan CJ, Zhou W, Ren D (2016) Development of fly ash and iron ore tailing based porous geopolymer for removal of Cu(II) from wastewater. Ceram Int 42:13507–13518CrossRef

Cele EN, Maboeta M (2016) A greenhouse trial to investigate the ameliorative properties of biosolids and plants on physicochemical conditions of iron ore tailings: implications for an iron ore mine site remediation. J Environ Manag 165:167–174CrossRef

Wang CL, Ni W, Zhang SQ, Wang WK (2016) Preparation and properties of autoclaved aerated concrete using coal gangue and iron ore tailings. Constr Build Mater 104:109–115CrossRef

Siddique R, Bennacer R (2012) Use of iron and steel industry by-product (GGBS) in cement paste and mortar. Resour Conserv Recycl 69:29–34CrossRef

Yellishetty M, Karpe V, Reddy EH, Subhash KN, Ranjith PG (2008) Reuse of iron ore mineral wastes in civil engineering constructions: a case study. Resour Conserv Recycl 52:1283–1289CrossRef

Mishra RK, Rout PC, Sarangi K, Nathsarma KC (2011) Solvent extraction of Fe(III) from the chloride leach liquor of low grade iron ore tailings using Aliquat 336. Hydrometallurgy 108:93–99CrossRef

Li C, Sun HH, Bai J, Li LT (2010) Innovative methodology for comprehensive utilization of iron ore tailings part 1: the recovery of iron from iron ore tailings using magnetic separation after magnetizing roasting. J Hazard Mater 174:71–77CrossRef

10.

Yang CQ, Li SQ, Zhang CQ, Bai JX, Guo ZJ (2017) Application of superconducting high gradient magnetic separation technology on silica extraction from iron ore beneficiation tailings. Miner Proc Extr Metall Rev. https://doi.org/10.1080/08827508.2017.1324439

11.

Nouri A, Jafari M, Kazemimoghadam M, Mohammadi T (2012) Effects of hydrothermal parameters on the synthesis of nanocrystalline zeolite NaY. Clay Clay Miner 60:610–615CrossRef

12.

Wajima T, Ikegami Y (2009) Synthesis of crystalline zeolite-13X from waste porcelain using alkali fusion. Ceram Int 35:2983–2986CrossRef

13.

Zhan YZ, Li XX, Zhang YG, Han L, Chen YL (2013) Phase and morphology control of LTA/FAU zeolites by adding trace amounts of inorganic ions. Ceram Int 39:5997–6003CrossRef

14.

Chandrasekhar S, Pramada PN (2002) Thermal studies of low silica zeolites and their magnesium exchanged forms. Ceram Int 28:177–186CrossRef

15.

Gascon J, Kapteijn F, Zornoza B, Sebastian V, Casado C, Coronas J (2012) Practical approach to zeolitic membranes and coatings: state of the art, opportunities, barriers, and future perspectives. Chem Mater 24:2829–2844CrossRef

16.

Jafari M, Mohammadi T, Kazemimoghadam M (2014) Synthesis and characterization of ultrafine sub-micron Na-LTA zeolite particles prepared via hydrothermal template-free method. Ceram Int 40:12075–12080CrossRef

17.

Visa M (2016) Synthesis and characterization of new zeolite materials obtained from fly ash for heavy metals removal in advanced wastewater treatment. Powder Technol 294:338–347CrossRef

18.

Kotova OB, Shabalin IN, Shushkov DA, Kocheva LS (2016) Hydrothermal synthesis of zeolites from coal fly ash. Adv Appl Ceram 115:152–157

19.

Ma YA, Yan CJ, Alshameri A, Qiu XM, Zhou CY, Li D (2014) Synthesis and characterization of 13X zeolite from low-grade natural kaolin. Adv Powder Technol 25:495–499CrossRef

20.

Ma DY, Wang ZD, Guo M, Zhang M, Liu JB (2014) Feasible conversion of solid waste bauxite tailings into highly crystalline 4A zeolite with valuable application. Waste Manag 34:2365–2372CrossRef

21.

Dey KP, Ghosh S, Naskar MK (2013) Organic template-free synthesis of ZSM-5 zeolite particles using rice husk ash as silica source. Ceram Int 39:2153–2157CrossRef

22.

Ghasemi Z, Younesi H (2012) Preparation of free-template nanometer-sized Na-A and -X zeolites from rice husk ash. Waste Biomass Valor 3:61–74CrossRef

23.

Chen D, Hu X, Shi L, Cui Q, Wang HY, Yao HQ (2012) Synthesis and characterization of zeolite X from lithium slag. Appl Clay Sci 59–60:148–151CrossRef

24.

Wajima T, Shimizu T, Ikegami Y (2008) Zeolite synthesis from paper sludge ash with addition of diatomite. J Chem Technol Biotech 83:921–927CrossRef

25.

Wajima T, Munakata K (2012) Material conversion from waste sandstone cake into cation exchanger using alkali fusion. Ceram Int 38:1741–1744CrossRef

26.

Purnomo CW, Salim C, Hinode H (2012) Synthesis of pure Na-X and Na-A zeolite from bagasse fly ash. Microporous Mesoporous Mater 162:6–13CrossRef

27.

Su SQ, Ma HW, Chuan XY (2016) Hydrothermal synthesis of zeolite A from K-feldspar and its crystallization mechanism. Adv Powder Technol 27:139–144CrossRef

28.

Dyer A, Enamy H (1985) The sodium-calcium exchange in zeolite A. Zeolites 5:66–67CrossRef

29.

Sekhon BS, Sangha MK (2004) Detergents-zeolites and enzymes excel cleaning power. Resonance 9:35–45CrossRef

30.

Ayele L, Pérez-Pariente J, Chebude Y, Díaz I (2016) Conventional versus alkali fusion synthesis of zeolite A from low grade kaolin. Appl Clay Sci 132–133:485–490CrossRef

31.

Parker WG, Stephen C (2010) Structure of zeolite a (LTA) surfaces and the zeolite A/water interface. J Phys Chem C 114:9739–9747CrossRef

32.

Farag IH, Zhang J (2012) Simulation of synthetic zeolites-4A and 5A manufacturing for green processing. IRACST 2:188–194

33.

Fritzsche S, Haberlandt R, Krger J, Pfeifer H, Heinzinger K, Wolfsberg M (1995) Influence of exchangeable cations on the diffusion of neutral diffusants in zeolites of type LTA: an MD study. Chem Phys Lett 242:361–366CrossRef

34.

Krishna R, Baten JWV (2009) A molecular dynamics investigation of a variety of influences of temperature on diffusion in zeolites. Microporous Mesoporous Mater 125:126–134CrossRef

35.

Krishna R, Baten JWV (2010) A molecular dynamics investigation of the diffusion characteristics of cavity-type zeolites with 8-ring windows. Microporous Mesoporous Mater 137:83–91CrossRef

36.

Paoli H, Methivier A, Jobic H, Krause C, Pfeifer H, Stallmach F, Karger J (2002) Comparative QENS and PFG NMR diffusion studies of water in zeolite NaCaA. Microporous Mesoporous Mater 55:147–158CrossRef

37.

Wakihara T, Sato K, Inagaki S, Tatami J, Komeya K, Meguro T, Kubota Y (2010) Fabrication of fine zeolite with improved catalytic properties by bead milling and alkali treatment. ACS Appl Mater Interfaces 2:2715–2718CrossRef

38.

Ma HC, Yao QT, Fu YH, Ma C, Dong XL (2010) Synthesis of zeolite of type A from bentonite by alkali fusion activation using Na₂CO₃. Ind Eng Chem Res 49:454–458CrossRef

39.

Barr TL, Seal S, Wozniak K, Klinowski J (1997) ESCA studies of the coordination state of aluminium in oxide environments. J Chem Soc Faraday Trans 93:181–186CrossRef

40.

Okada K, Kameshima Y, Yasumori A (2010) Chemical shift of silicon X-ray photoelectron spectra by polymerization structures of silicates. J Am Ceram Soc 81:1970–1972CrossRef

41.

Yue YY, Liu HY, Yuan P, Li TS, Yu CZ, Bi H, Bao XJ (2014) From natural aluminosilicate minerals to hierarchical ZSM-5 zeolites: a nanoscale depolymerization-reorganization approach. J Catal 319:200–210CrossRef

42.

Black L, Garbev K, Beuchle G, Stemmermann P, Schild D (2006) X-ray photoelectron spectroscopic investigation of nanocrystalline calcium silicate hydrates synthesised by reactive milling. Cem Concr Res 36:1023–1031CrossRef

Titel: Utilization of iron ore tailing for the synthesis of zeolite A by hydrothermal method
verfasst von: Changquan Zhang
Suqin Li
Publikationsdatum: 15.03.2018
Verlag: Springer Japan
Erschienen in: Journal of Material Cycles and Waste Management / Ausgabe 3/2018
Print ISSN: 1438-4957
Elektronische ISSN: 1611-8227
DOI: https://doi.org/10.1007/s10163-018-0724-7

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2018

Solid waste management in least developed countries: current status and challenges faced

Recycling of waste biomass and mineral powder for preparation of potassium-enriched compost

Tailoring mesoporosity of poly(furfuryl alcohol)-based activated carbons and their ability to adsorb organic compounds from water

Comparative fertilizer properties of digestates from mesophilic and thermophilic anaerobic digestion of dairy manure: focusing on plant growth promoting bacteria (PGPB) and environmental risk

Municipal solid waste generation in China: influencing factor analysis and multi-model forecasting

Trace chemical partitioning in construction and demolition debris fines: process and market implications