nach oben

Cellulose

Erschienen in:

23.02.2021 | Original Research

Tunable micro-structure of dissolving pulp-based cellulose nanofibrils with facile prehydrolysis process

verfasst von: Yachong Zhu, Chaojun Wu, Dongmei Yu, Qijun Ding, Ronggang Li

Erschienen in: Cellulose | Ausgabe 6/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, eucalyptus raw materials were pre-hydrolyzed and cellulose nanofibrils (CNFs) were prepared. The effect of prehydrolysis conditions on the micro-structure of dissolving pulp-based CNFs was studied, and the hydrogen bond change and crystal structure in CNFs were analyzed by FTIR peak fitting and X-ray diffractometer. The results showed that prehydrolysis would not change the crystal structure of CNFs, but could break up the intermolecular and intramolecular hydrogen bonds of CNFs. An increase in the prehydrolysis temperature would promote the breaking of the intramolecular hydrogen bonds in the amorphous region of CNFs, which leads to an increase in the crystallinity of CNFs. Long-time prehydrolysis treatments not only broke up the intermolecular hydrogen bonds in the amorphous region of CNFs, but also intramolecular hydrogen bonding in the crystalline region. Analyses of SEM and gas adsorption revealed that some nanopores became more and more large, and some small nanopores appeared on the surface of the CNFs with the increase of prehydrolysis intensity. The appearance of large or small nanopores on the surface of the CNFs were likely due to the breakage of hydrogen bonds in CNFs. The intermolecular and intramolecular hydrogen bonds of cellulose could be destroyed by changing prehydrolysis conditions, which resulted in appearance of a lot of nanopores on the surface of the CNFs. The DSC and TGA analyses revealed that the prehydrolysis has a little impact on the thermal stability of CNFs. This work can provide a tunable pathway of micro-structure of CNFs by controlling prehydrolysis process.

Graphic abstract

Vorheriger Artikel Fabrication of transparent and durable superhydrophobic polysiloxane/SiO2 coating on the wood surface

Nächster Artikel Differences and similarities between kraft and oxygen delignification of softwood fibers: effects on mechanical properties

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Beroual M, Boumaza L, Mehelli O, Trache D, Tarchoun AF, Khimeche K (2020a) Physicochemical properties and thermal stability of microcrystalline cellulose isolated from esparto grass using different delignification approaches. J Polym Environ. https://doi.org/10.1007/s10924-020-01858-wCrossRef

Beroual M, Trache D, Mehelli O, Boumaza L, Tarchoun AF, Derradji M, Khimeche K (2020b) Effect of the delignification process on the physicochemical properties and thermal stability of microcrystalline cellulose extracted from date palm fronds. Waste Biomass Valorization. https://doi.org/10.1007/s12649-020-01198-9CrossRef

Correia VD, dos Santos V, Sain M, Santos SF, Leao AL, Savastano H (2016) Grinding process for the production of nanofibrillated cellulose based on unbleached and bleached bamboo organosolv pulp. Cellulose 23:2971–2987. https://doi.org/10.1007/s10570-016-0996-9CrossRef

Desmaisons J, Boutonnet E, Rueff M, Dufresne A, Bras J (2017) A new quality index for benchmarking of different cellulose nanofibrils. Carbohydr Polym 174:318–329. https://doi.org/10.1016/j.carbpol.2017.06.032CrossRefPubMed

Du H, Liu W, Zhang M, Si C, Zhang X, Li B (2019) Cellulose nanocrystals and cellulose nanofibrils based hydrogels for biomedical applications. Carbohydr Polym 209:130–144. https://doi.org/10.1016/j.carbpol.2019.01.020CrossRefPubMed

Du H et al (2020) Sustainable valorization of paper mill sludge into cellulose nanofibrils and cellulose nanopaper. J Hazard Mater 400:123106. https://doi.org/10.1016/j.jhazmat.2020.123106CrossRefPubMed

Farooq A, Patoary MK, Zhang M, Mussana H et al (2020) Cellulose from sources to nanocellulose and an overview of synthesis and properties of nanocellulose/zinc oxide nanocomposite materials. Int J Biolog Macromol 154:1050–1073CrossRef

Guigou M, Cabrera MN, Vique M, Bariani M, Guarino J, Ferrari MD, Lareo C (2019) Combined pretreatments of eucalyptus sawdust for ethanol production within a biorefinery approach. Biomass Convers Biorefinery 9:293–304. https://doi.org/10.1007/s13399-018-0353-3CrossRef

Habibi Y, Lucia LA, Rojas OJ (2010) Cellulose nanocrystals: chemistry, self-assembly, and applications. Chem Rev 110:3479–3500. https://doi.org/10.1021/cr900339wCrossRefPubMed

Hamed O et al (2019) Synthesis of a cross-linked cellulose-based amine polymer and its application in wastewater purification. Environ Sci Pollut Res 26:28080–28091. https://doi.org/10.1007/s11356-019-06001-4CrossRef

Hong S, Yuan Y, Li P, Zhang K, Lian H, Liimatainen H (2020) Enhancement of the nanofibrillation of birch cellulose pretreated with natural deep eutectic solvent. Ind Crops Prod. https://doi.org/10.1016/j.indcrop.2020.112677CrossRef

Ioelovich M (2008) Cellulose as a nanostructured polymer: a short review. BioResources 3:1403–1418

Isikgor FH, Becer CR (2015) Lignocellulosic biomass: a sustainable platform for the production of bio-based chemicals and polymers. Polym Chem 6:4497–4559. https://doi.org/10.1039/c5py00263jCrossRef

Jebali Z et al (2018) Cellulose nanofibrils (CNFs) from Ammophila arenaria, a natural and a fast growing grass plant. Int J Biolog Macromol 107:530–536CrossRef

Kassab Z, Mansouri S, Tamraoui Y, Sehaqui H, Hannache H, Qaiss AK, El Achaby M (2020) Identifying Juncus plant as viable source for the production of micro- and nano-cellulose fibers: application for PVA composite materials development. Ind Crop Prod 144:11. https://doi.org/10.1016/j.indcrop.2019.112035CrossRef

Kawee N, Lam NT, Sukyai P (2018) Homogenous isolation of individualized bacterial nanofibrillated cellulose by high pressure homogenization. Carbohydr Polym 179:394–401. https://doi.org/10.1016/j.carbpol.2017.09.101CrossRefPubMed

Kim UJ, Eom SH, Wada M (2010) Thermal decomposition of native cellulose: Influence on crystallite size. Polym Degrad Stabil 95:778–781. https://doi.org/10.1016/j.polymdegradstab.2010.02.009CrossRef

Kishimoto CTM, Moerschbacher L, Prestes RA, Hoepfner JC, Pinheiro LA (2020) Preparation of nanocellulose by hydrolysis catalysedusing salts with different Fe valency. J Nanopart Res 22:12. https://doi.org/10.1007/s11051-020-04928-1CrossRef

Klemm D, Kramer F, Moritz S, Lindstrom T, Ankerfors M, Gray D, Dorris A (2011) Nanocelluloses: a new family of nature-based materials. Angew Chem-Int Edit 50:5438–5466. https://doi.org/10.1002/anie.201001273CrossRef

Lim WL, Gunny AAN, Kasim FH, AiNashef IM, Arbain D (2019) Alkaline deep eutectic solvent: a novel green solvent for lignocellulose pulping. Cellulose 26:4085–4098. https://doi.org/10.1007/s10570-019-02346-8CrossRef

Liu W et al (2020) Bacterial cellulose-based composite scaffolds for biomedical applications: a review. ACS Sustain Chem Eng 8:7536–7562. https://doi.org/10.1021/acssuschemeng.0c00125CrossRef

Miao C et al (2020) Superior crack initiation and growth characteristics of cellulose nanopapers. Cellulose 27:3181–3195. https://doi.org/10.1007/s10570-020-03015-xCrossRef

Muthoka RM, Kim HC, Kim JW, Zhai L, Panicker PS, Kim J (2020) Steered pull simulation to determine nanomechanical properties of cellulose nanofiber. Materials 13:14. https://doi.org/10.3390/ma13030710CrossRef

Neiva D, Fernandes L, Araujo S, Lourenco A, Gominho J, Simoes R, Pereira H (2015) Chemical composition and kraft pulping potential of 12 eucalypt species. Ind Crop Prod 66:89–95. https://doi.org/10.1016/j.indcrop.2014.12.016CrossRef

Nie SX, Zhang K, Lin XJ, Zhang CY, Yan DP, Liang HM, Wang SF (2018) Enzymatic pretreatment for the improvement of dispersion and film properties of cellulose nanofibrils. Carbohydr Polym 181:1136–1142. https://doi.org/10.1016/j.carbpol.2017.11.020CrossRefPubMed

Ovalle-Serrano SA, Díaz-Serrano LA, Hong C, Hinestroza JP, Blanco-Tirado C, Combariza MY (2020) Synthesis of cellulose nanofiber hydrogels from fique tow and Ag nanoparticles. Cellulose 27:9947–9961. https://doi.org/10.1007/s10570-020-03527-6CrossRef

Poletto M, Ornaghi HL, Zattera AJ (2014) Native cellulose: structure, characterization and thermal properties. Materials 7:6105–6119. https://doi.org/10.3390/ma7096105CrossRefPubMedPubMedCentral

Romani A, Larramendi A, Yanez R, Cancela A, Sanchez A, Teixeira JA, Domingues L (2019) Valorization of Eucalyptus nitens bark by organosolv pretreatment for the production of advanced biofuels. Ind Crop Prod 132:327–335. https://doi.org/10.1016/j.indcrop.2019.02.040CrossRef

Sazali N, Salleh WNW, Ismail AF, Wong KC, Iwamoto Y (2019) Exploiting pyrolysis protocols on BTDA-TDI/MDI (P84) polyimide/nanocrystalline cellulose carbon membrane for gas separations. J Appl Polym Sci 136:9. https://doi.org/10.1002/app.46901CrossRef

Schneider WDH et al (2020) Lignin degradation and detoxification of eucalyptus wastes by on-site manufacturing fungal enzymes to enhance second-generation ethanol yield. Appl Energy 262:12. https://doi.org/10.1016/j.apenergy.2020.114493CrossRef

Segal LC, Creely J Jr, Martin AEJ, Conrad CMJTRJ (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the x-ray diffractometer. Text Res J 29:786–794. https://doi.org/10.1177/004051755902901003CrossRef

Sirvio JA, Visanko M, Liimatainen H (2015) Deep eutectic solvent system based on choline chloride-urea as a pre-treatment for nanofibrillation of wood cellulose. Green Chem 17:3401–3406. https://doi.org/10.1039/c5gc00398aCrossRef

Stankov S et al (2020) Chemical composition and antimicrobial activity of essential oil from aerial part (leaves and fruit) of Eucalyptus gomphocephala DC. J Essent Oil Bear Plants 23:204–212. https://doi.org/10.1080/0972060x.2020.1727365CrossRef

Sukhavattanakul P, Manuspiya H (2020) Fabrication of hybrid thin film based on bacterial cellulose nanocrystals and metal nanoparticles with hydrogen sulfide gas sensor ability. Carbohydr Polym 230:12. https://doi.org/10.1016/j.carbpol.2019.115566CrossRef

Tarchoun AF, Trache D, Klapötke TM, Chelouche S, Derradji M, Bessa W, Mezroua A (2019a) A promising energetic polymer from Posidonia oceanica brown algae: synthesis, characterization, and kinetic modeling. Macromol Chem Phys 220:1900358. https://doi.org/10.1002/macp.201900358CrossRef

Tarchoun AF, Trache D, Klapötke TM, Derradji M, Bessa W (2019b) Ecofriendly isolation and characterization of microcrystalline cellulose from giant reed using various acidic media. Cellulose 26:7635–7651. https://doi.org/10.1007/s10570-019-02672-xCrossRef

Trache D, Tarchoun AF, Derradji M, Hamidon TS, Masruchin N, Brosse N, Hussin MH (2020a) Nanocellulose: from fundamentals to advanced applications. Front Chem 8:392. https://doi.org/10.3389/fchem.2020.00392CrossRefPubMedPubMedCentral

Trache D, Thakur VK, Boukherroub R (2020b) Cellulose nanocrystals/graphene hybrids-a promising new class of materials for advanced applications. Nanomaterials (Basel). https://doi.org/10.3390/nano10081523CrossRef

Wan JQ, Lian J, Wang Y, Ma YW (2015) Investigation of cellulose supramolecular structure changes during conversion of waste paper in near-critical water on producing 5-hydroxymethyl furfural. Renew Energy 80:132–139. https://doi.org/10.1016/j.renene.2015.01.071CrossRef

Wang D (2018) A critical review of cellulose-based nanomaterials for water purification in industrial processes. Cellulose 26:687–701. https://doi.org/10.1007/s10570-018-2143-2CrossRef

Wang HQ, Li JC, Zeng XH, Tang X, Sun Y, Lei TZ, Lin L (2020) Extraction of cellulose nanocrystals using a recyclable deep eutectic solvent. Cellulose 27:1301–1314. https://doi.org/10.1007/s10570-019-02867-2CrossRef

Wang S, Gao W, Chen K, Xiang Z, Zeng J, Wang B, Xu J (2018) Deconstruction of cellulosic fibers to fibrils based on enzymatic pretreatment. Bioresour Technol 267:426–430. https://doi.org/10.1016/j.biortech.2018.07.067CrossRefPubMed

Yu W et al (2020) Comparison of deep eutectic solvents on pretreatment of raw ramie fibers for cellulose nanofibril production. ACS Omega 5:5580–5588. https://doi.org/10.1021/acsomega.0c00506CrossRefPubMedPubMedCentral

Yu W, Wang CY, Yi YJ, Zhou WL, Wang HY, Yang YR, Tan ZJ (2019) Choline chloride-based deep eutectic solvent systems as a pretreatment for nanofibrillation of ramie fibers. Cellulose 26:3069–3082. https://doi.org/10.1007/s10570-019-02290-7CrossRef

Zhao DQ et al (2019) Exploring structural variations of hydrogen-bonding patterns in cellulose during mechanical pulp refining of tobacco stems. Carbohydr Polym 204:247–254. https://doi.org/10.1016/j.carbpol.2018.10.024CrossRefPubMed

Zhu HL et al (2016) Wood-derived materials for green electronics, biological devices, and energy applications. Chem Rev 116:9305–9374. https://doi.org/10.1021/acs.chemrev.6b00225CrossRefPubMed

Titel: Tunable micro-structure of dissolving pulp-based cellulose nanofibrils with facile prehydrolysis process
verfasst von: Yachong Zhu
Chaojun Wu
Dongmei Yu
Qijun Ding
Ronggang Li
Publikationsdatum: 23.02.2021
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 6/2021
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-021-03760-7

Springer Professional

Abstract

Graphic abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 6/2021

Differences and similarities between kraft and oxygen delignification of softwood fibers: effects on mechanical properties

Starch/clay aerogel reinforced by cellulose nanofibrils for thermal insulation

Developing bagasse towards superhydrophobic coatings

Development of a Nitrazine Yellow-glycidyl methacrylate coating onto cotton fabric through thermal-induced radical polymerization reactions: a simple approach towards wearable pH sensors applications

Eco-friendly, efficient and durable fireproof cotton fabric prepared by a feasible phytic acid grafting route

Effect of coir fiber and TiC nanoparticles on basalt fiber reinforced epoxy hybrid composites: physico–mechanical characteristics