nach oben

Journal of Materials Science

Erschienen in:

22.05.2018 | Mechanochemical Synthesis

Synthesis of LaB₆–Al₂O₃ nanocomposite powders via ball milling-assisted annealing

verfasst von: Emre Tekoğlu, Ceren İmer, Duygu Ağaoğulları, M. Lütfi Öveçoğlu

Erschienen in: Journal of Materials Science | Ausgabe 19/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, LaB₆–Al₂O₃ nanocomposite powders were synthesized via ball milling-assisted annealing process starting from La₂O₃–B₂O₃–Al powder blends. High-energy ball milling was conducted at various durations (0, 3, 6 and 9 h). Then, the milled powders were annealed at 1200 °C for 3 h under Ar atmosphere in order to obtain LaB₆ and Al₂O₃ phases as reaction products. X-ray diffractometry (XRD), scanning electron microscopy/energy-dispersive spectrometry (SEM/EDS) and transmission electron microscopy (TEM) techniques were utilized to carry out microstructural characterization of the powders. No reaction between the reactants was observed in the XRD patterns of the milled powders, indicating that high-energy ball milling did not trigger any chemical reactions even after milling for 9 h. LaAlO₃ and LaBO₃ phases existed in the annealed powders which were milled for 0, 3 and 6 h. LaBO₃ phase was removed after HCl leaching. 9-h milled and annealed powders did not exhibit any undesired phases such as LaAlO₃ and LaBO₃ after leaching step, and pure nanocrystalline LaB₆–Al₂O₃ composite powders were successfully obtained. TEM analyses revealed that very fine LaB₆ particles (~ 100 nm) were embedded in coarse Al₂O₃ (~ 500 nm) particles.

Vorheriger Artikel Mechanochemical syntheses of LiFeGe2O6-based nanocomposite and novel nanoglassy LiFeTi2O6

Nächster Artikel Kinetics of mechanical activation of Al/CuO thermite

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Shi XL, Xu FM, Zhang ZJ et al (2010) Mechanical properties of hot-pressed Al₂O₃/SiC composites. Mater Sci Eng, A 527:4646–4649. https://doi.org/10.1016/j.msea.2010.03.035 CrossRef

Hosseini SN, Karimzadeh F, Enayati MH (2012) Mechanochemical synthesis of Al₂O₃/Co nanocomposite by aluminothermic reaction. Adv Powder Technol 23:334–337. https://doi.org/10.1016/j.apt.2011.04.008 CrossRef

Nikkhah AJ, Torabi O, Ebrahimi-Kahrizsangi R et al (2014) Investigation on mechanochemical synthesis of Al2O 3/BN nanocomposite by aluminothermic reaction. Ceram Int 40:5559–5566. https://doi.org/10.1016/j.ceramint.2013.10.147 CrossRef

Palmero P, Kern F, Sommer F et al (2014) Issues in nanocomposite ceramic engineering: focus on processing and properties of alumina-based composites. J Appl Biomater Funct Mater. https://doi.org/10.5301/jabfm.5000185

Mozalev A, Sakairi M, Takahashi H et al (2014) Nanostructured anodic-alumina-based dielectrics for high-frequency integral capacitors. Thin Solid Films 550:486–494. https://doi.org/10.1016/j.tsf.2012.02.077 CrossRef

Reddy MP, Ubaid F, Shakoor RA et al (2017) Effect of reinforcement concentration on the properties of hot extruded Al–Al₂O₃ composites synthesized through microwave sintering process. Mater Sci Eng A 696:60–69. https://doi.org/10.1016/j.msea.2017.04.064 CrossRef

Lihong B, Wurentuya Wei W, Tegus O (2014) A new route for the synthesis of submicron-sized LaB₆. Mater Charact 97:69–73. https://doi.org/10.1016/j.matchar.2014.08.011 CrossRef

Xu J, Min G Hui, Hu L Jie, et al. (2009) Dependence of characteristics of LaB₆ films on DC magnetron sputtering power. Trans Nonferrous Met Soc China (English Ed 19:952–955. https://doi.org/10.1016/s1003-6326(08)60384-2

Kitamura K, Osaka T, Nagao T et al (1993) Surface phonon dispersion curves of NiA_l(111). Jpn J Appl Phys 32:3252–3256. https://doi.org/10.1143/JJAP.32.3252 CrossRef

10.

Hossain FM, Riley DP, Murch GE (2005) Ab initio calculations of the electronic structure and bonding characteristics of LaB₆. Phys Rev B Condens Matter Mater Phys. https://doi.org/10.1103/PhysRevB.72.235101

11.

Zhou X, Zhang H, Cheng C et al (2009) First-principles study of structural, electronic and elastic properties of diboride of vanadium. Phys B Condens Matter 404:1527–1531. https://doi.org/10.1016/j.physb.2009.01.013 CrossRef

12.

Otani S, Nakagawa H, Nishi Y, Kieda N (2000) Floating zone growth and high temperature hardness of rare-earth hexaboride crystals: laB₆, CeB₆, PrB₆, NdB₆, and SmB₆. J Solid State Chem 154:238–241. https://doi.org/10.1006/jssc.2000.8842 CrossRef

13.

Otani S, Tanaka T, Ishizawa Y (1993) Crystal quality and high temperature hardness of LaB₆ crystals prepared by the floating zone method. J Alloys Compd. https://doi.org/10.1016/0925-8388(93)90506-I

14.

Takagi K, Ishii M (1977) Growth of LaB₆ single crystals by a laser heated floating zone method. J Cryst Growth 40:1–5. https://doi.org/10.1016/0022-0248(77)90025-2 CrossRef

15.

Motojima S, Takahashi Y, Sugiyama K (1978) Chemical vapor growth of LaB₆ whiskers and crystals having a sharp tip. J Cryst Growth 44:106–109. https://doi.org/10.1016/0022-0248(78)90333-0 CrossRef

16.

Kher S, Spencer JT (1998) Chemical vapor deposition of metal borides 7. The relatively low temperature formation of crystalline lanthanum hexaboride thin films from boron hydride cluster compounds by chemical vapor deposition. J Phys Chem Solids 59:1343–1351. https://doi.org/10.1016/S0022-3697(97)00230-8 CrossRef

17.

Hasan M, Sugo H, Kisi E (2013) Low temperature carbothermal and boron carbide reduction synthesis of LaB6. J Alloys Compd 578:176–182. https://doi.org/10.1016/j.jallcom.2013.05.008 CrossRef

18.

Yuan Y, Zhang L, Liang L et al (2011) A solid-state reaction route to prepare LaB₆ nanocrystals in vacuum. Ceram Int 37:2891–2896. https://doi.org/10.1016/j.ceramint.2011.03.073 CrossRef

19.

Zhang M, Yuan L, Wang X et al (2008) A low-temperature route for the synthesis of nanocrystalline LaB₆. J Solid State Chem 181:294–297. https://doi.org/10.1016/j.jssc.2007.12.011 CrossRef

20.

Ağaoğulları D, Duman İ, Öveçoğlu ML (2012) Synthesis of LaB₆ powders from La₂O₃, B₂O₃ and Mg blends via a mechanochemical route. Ceram Int 38:6203–6214. https://doi.org/10.1016/j.ceramint.2012.04.073 CrossRef

21.

Ağaoğullari D, Balcı Ö, Öveçoğlu ML, Duman İ (2016) Preparation of LaB₆ powders via calciothermic reduction using mechanochemistry and acid leaching. KONA Powder Part J 2016:203–218. https://doi.org/10.14356/kona.2016001

22.

Gilman PS, Benjamin JS (1983) Mechanical alloying. Annu Rev Mater Sci 13:279–300. https://doi.org/10.1146/annurev.ms.13.080183.001431 CrossRef

23.

Suryanarayana C, Ivanov E, Boldyrev VV (2001) The science and technology of mechanical alloying. Mater Sci Eng, A 304–306:151–158. https://doi.org/10.1016/S0921-5093(00)01465-9 CrossRef

24.

Suryanarayana C (2001) Mechanical alloying and milling. Prog Mater Sci 46:1–184. https://doi.org/10.1016/S0079-6425(99)00010-9 CrossRef

25.

Benjamin JS (1990) Mechanical alloying—a perspective. Met Powder Rep 45:122–127. https://doi.org/10.1016/S0026-0657(10)80124-9 CrossRef

26.

Hadef F, Otmani A (2015) Mechanical alloying/milling. In: Handb Mech Nanostructuring, pp 263–276

27.

Sritharan T, Boey FYC, Srinivas A (2007) Synthesis of complex ceramics by mechanochemical activation. J Mater Process Technol 192–193:255–258. https://doi.org/10.1016/j.jmatprotec.2007.04.079 CrossRef

28.

Suryanarayana C, Ivanov E (2013) 3—Mechanochemical synthesis of nanocrystalline metal powders. In: Adv Powder Metall, pp 42–68

29.

Balcı Ö, Ağaoğulları D, Öveçoğlu ML, Duman İ (2016) Synthesis of niobium borides by powder metallurgy methods using Nb₂O₅, B₂O₃ and Mg blends. Trans Nonferrous Met Soc China (English Ed 26:747–758. https://doi.org/10.1016/s1003-6326(16)64165-1

30.

Aĝaoĝullari D, Gökçe H, Duman I, Öveçoĝlu ML (2012) Characterization investigations of ZrB 2/ZrC ceramic powders synthesized by mechanical alloying of elemental Zr, B and C blends. J Eur Ceram Soc 32:1447–1455. https://doi.org/10.1016/j.jeurceramsoc.2011.04.026 CrossRef

31.

Akgün B, Çamurlu HE, Topkaya Y, Sevinç N (2011) Mechanochemical and volume combustion synthesis of ZrB₂. Int J Refract Met Hard Mater 29:601–607. https://doi.org/10.1016/j.ijrmhm.2011.04.005 CrossRef

32.

Khaghani-Dehaghani MA, Ebrahimi-Kahrizsangi R, Setoudeh N, Nasiri-Tabrizi B (2011) Mechanochemical synthesis of Al₂O₃–TiB₂ nanocomposite powder from Al–TiO₂–H₃BO₃ mixture. Int J Refract Met Hard Mater 29:244–249. https://doi.org/10.1016/j.ijrmhm.2010.11.001 CrossRef

33.

Yeh CL, Li RF (2009) Formation of TiB₂–Al₂O₃ and NbB₂–Al₂O₃ composites by combustion synthesis involving thermite reactions. Chem Eng J 147:405–411. https://doi.org/10.1016/j.cej.2009.01.007 CrossRef

34.

Mishra SK, Das SK, Pathak LC (2006) Sintering behaviour of self-propagating high temperature synthesised ZrB2-Al2O3 composite powder. Mater Sci Eng a-Structural Mater Prop Microstruct Process 426:229–234. https://doi.org/10.1016/j.msea.2006.04.026 CrossRef

35.

Jianxin D, Xing A (1997) Wear resistance of Al2O3/TiB2 ceramic cutting tools in sliding wear tests and in machining processes. J Mater Process Technol 72:249–255. https://doi.org/10.1016/S0924-0136(97)00176-3 CrossRef

36.

Mishra S, Rupa P, Das S, Shcherbakov V (2007) Effect of titanium diluent on the fabrication of Al₂O₃–ZrB₂ composite by SHS dynamic compaction. Compos Sci Technol 67:1734–1739. https://doi.org/10.1016/j.compscitech.2006.05.014 CrossRef

37.

Williamson G, Hall W (1953) X-ray line broadening from filed aluminium and wolfram. Acta Metall 1:22–31. https://doi.org/10.1016/0001-6160(53)90006-6 CrossRef

38.

Lu L, Lai MO, Zhang S (1997) Diffusion in mechanical alloying. J Mater Process Technol 67:100–104. https://doi.org/10.1016/S0924-0136(96)02826-9 CrossRef

39.

Chauruka SR, Hassanpour A, Brydson R et al (2015) Effect of mill type on the size reduction and phase transformation of gamma alumina. Chem Eng Sci 134:774–783. https://doi.org/10.1016/j.ces.2015.06.004 CrossRef

Titel: Synthesis of LaB6–Al2O3 nanocomposite powders via ball milling-assisted annealing
verfasst von: Emre Tekoğlu
Ceren İmer
Duygu Ağaoğulları
M. Lütfi Öveçoğlu
Publikationsdatum: 22.05.2018
Verlag: Springer US
Erschienen in: Journal of Materials Science / Ausgabe 19/2018
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-018-2454-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 19/2018

Kinetics of mechanical activation of Al/CuO thermite

Nanocrystalline non-equilibrium alloys of molybdenum with sodium

Mechanochemical preparation of nanocrystalline metal halide phosphors

Physical properties of lead-free BaFe1/2Nb1/2O3 ceramics obtained from mechanochemically synthesized powders

Synthesis of nickel boride by thermal explosion in ball-milled powder mixtures

BaF-benzenedicarboxylate: the first mechanochemical synthesis of a new coordination polymer with a direct Ba–F bond

Premium Partner

Marktübersichten