nach oben

Journal of Materials Engineering and Performance

Erschienen in:

03.04.2017

On the Effects of the Rejuvenation Treatment on Mechanical and Microstructural Properties of IN-738 Superalloy

verfasst von: Cosimo Monti, Alessandro Giorgetti, Leonardo Tognarelli, Francesco Mastromatteo

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 5/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The main scope of this paper is to show the effects of a specific rejuvenation treatment studied for IN-38 on both the microstructure and the mechanical properties of the creep-damaged superalloy and to compare the tests results with the virgin material and with the recovery obtained through the standard heat treatment. This work will show that this rejuvenation treatment is able to recover the microstructure of creep-damaged specimens and that the creep and tensile properties of the rejuvenated alloy are even better than the virgin material for the tests performed. Moreover, it will be shown that the standard heat treatment provided for IN-738 is not able to fully recover the microstructure and that the creep properties of the superalloy during the tests have been lower than the virgin material.

Vorheriger Artikel Passive Film Properties and Electrochemical Behavior of Co-Cr-Mo Stainless Steel in Chloride Solution

Nächster Artikel Low-Cycle Fatigue Properties of a Nickel-Based Superalloy Haynes 282 for Heavy Components

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

M.J. Donachie and S.J. Donachie, Superalloys: A Technical Guide, 2nd ed., ASM International, Almere, 2002

G.C. Bieber and R.J. Mihalisin, Structural Studies and Properties of a New Cast High Strength Corrosion Resistant Superalloy, Strength Met. Alloys, Proceedings of the International Conference, 2nd, ASM, 1970, III, p. 1031–1036.

Alloy IN-738 Technical data, INCO, New York, 1981.

S.S. Hosseini, S. Nategh, and A. Ekrami, Microstructural Evolution in Damaged IN738LC Alloy During Various Steps of Rejuvenation Heat Treatments, J. Alloys Compd., 2002, 512, p 340–350CrossRef

E. Balikci and A. Raman, Characteristics of the γ′ Precipitates at High Temperatures in Ni-Base Polycrystalline Superalloy IN738LC, J. Mater. Sci., 2000, 35, p 3593–3597CrossRef

E. Balikci, A. Raman, and R.A. Mirshams, Influence of Various Heat Treatments on the Microstructure of Polycrystalline IN738LC, Metall. Mater. Trans. A, 1997, 28A(10), p 1993–2003CrossRef

P. Wangyao, V. Krongtong, W. Homkrajai, S. Polsilapa, and G. Lothongkum, Comparing Rejuvenated Microstructures After HIP Process and Different Heat Treatments in Cast Nickel Base Superalloys, IN-738 AND GTD-111 After Long-Term Service, Acta Metall. Slov., 2006, 12, p 23–32

Z. Mazur, A. Luna-Ramírez, J.A. Juárez-Islas, and A. Campos-Amezcua, Failure Analysis of a Gas Turbine Blade Made of Inconel 738LC Alloy, Eng. Fail. Anal., 2005, 12(3), p 474–486CrossRef

A.K. Koul, J.-P. Immarigeon, R. Castillo, P. Lowden, and J. Liburdi, Rejuvenation of Service-Exposed IN-738 Turbine Blades. Proceedings of Superalloys 1988 (sixth International Symposium), 1988, p 755–764

10.

S. Polsilapa, P. Sopon, N. Panich, N. Chuankrerkkul, and A. Thueploy, Reheat Treated Microstructures and Gamma Prime Particle Coarsening Behaviour at 900 °C of Cast Nickel Based Superalloy IN-738, J. Met. Mater. Miner., 2006, 16(2), p 7–13

11.

K.C. Antony and G.W. Goward, Aircraft Gas Turbine Blade and Vane Repair. Proceedings of Superalloys 1988 (sixth International Symposium), 1988, p 745–754

12.

D. Liu, J.C. Lippold, J. Li, S.R. Rohklin, J. Vollbrecht, and R. Grylls, Laser Engineered Net Shape (LENS) Technology for the Repair of Ni-Base Superalloy Turbine Components, Metall. Mater. Trans. A, 2014, 45(10), p 4454–4469CrossRef

13.

O. Yilmaz, N. Gindy, and J. Gao, A Repair and Overhaul Methodology for Aeroengine Components, Robot. Comput. Integr. Manuf., 2010, 26(2), p 190–201CrossRef

14.

S. Mokadem, C. Bezençon, A. Hauert, A. Jacot, and W. Kurz, Laser Repair of Superalloy Single Crystals with Varying Substrate Orientations, Metall. Mater. Trans. A, 2007, 38(7), p 1500–1510CrossRef

15.

M. Okazaki, I. Ohtera, and Y. Harada, Damage Repair in CMSX-4 Alloy Without Fatigue Life Reduction Penalty, Metall. Mater. Trans. A, 2004, 35(2), p 535–542CrossRef

16.

M. Brandt, S. Sun, N. Alam, P. Bendeich, and A. Bishop, Laser Cladding Repair of Turbine Blades in Power Plants: From Research to Commercialization, Int. Heat Treat. Surf. Eng., 2009, 3(3), p 105–114CrossRef

17.

C.Y. Su, C.P. Chou, B.C. Wu, and W.C. Lih, Plasma Transferred Arc Repair Welding of the Nickel-Base Superalloy IN-738LC, J. Mater. Eng. Perform., 1997, 6(5), p 619–627CrossRef

18.

J. Durocher and N.L. Richards, Evaluation of the Low Heat Input Process for Weld Repair of Nickel-Base Superalloys, J. Mater. Eng. Perform., 2011, 20(7), p 1294–1303CrossRef

19.

S. Vezzù, S. Rech, E. Vedelago, G.P. Zanon, G. Alfeo, A. Scialpi, and R. Huang, On Deposition of Waspaloy Coatings by Cold Spray, Surf. Eng., 2014, 30(5), p 342–351CrossRef

20.

S. Vezzù, C. Cavallini, S. Rech, E. Vedelago, and A. Giorgetti, Development of High Strength, High Thermal Conductivity Cold Sprayed Coatings to Improve Thermal Management in Hybrid Motorcycles, SAE Int. J. Mater. Manf., 2015, 8(1), p 180–186CrossRef

21.

S.R. Bell, Repair and Rejuvenation Procedures for Aero Gas-Turbine Hot-Section Components, Mater. Sci. Technol., 1985, 1(8), p 629–634CrossRef

22.

P. Wangyao, W. Homkrajai, V. Krongtong, N. Panich, and G. Lothongkum, OM Study of Effect of HIP and Heat Treatments on Microstructural Restoration in Cast Nickel Based Superalloy, IN-738, J. Met. Mater. Miner., 2007, 17(2), p 51–56

23.

A.K. Koul and R. Castillo, Assessment of Service Induced Microstructural Damage and Its Rejuvenation in Turbine Blades, Metall. Mater. Trans. A, 1988, 19(8), p 2049–2066CrossRef

24.

C. Monti, A. Giorgetti, P. Citti, and F. Mastromatteo, Evoluzione microstrutturale della superlega IN738, preventivamente danneggiata a creep, Durante le Varie Fasi del Trattamento Termico di Rejuvenation. Proceedings of the 35th National Conference AIM, November 2014, Rome, Italy

25.

E. Lvova and D. Norsworthy, Influence of Service-Induced Microstructural Changes on the Aging Kinetics of Rejuvenated Ni-Based Superalloy Gas Turbine Blades, J. Mater. Eng. Perform., 2001, 10(3), p 299–312CrossRef

26.

E. Lvova, A Comparison of Aging Kinetics of New and Rejuvenated Conventionally Cast GTD-111 Gas Turbine Blades, J. Mater. Eng. Perform., 2007, 16(2), p 254–264CrossRef

27.

S. Holmström and P. Auerkari, Robust Prediction of Full Creep Curves from Minimal Data and Time to Rupture Model, Energy Mater. Mater. Sci. Eng. Energy Syst., 2006, 1(4), p 249–255CrossRef

28.

OXFORD INSTRUMENTS – INCA, https://www.oxford-instruments.com/products/microanalysis/energy-dispersive-x-ray-systems-eds-edx/eds-for-sem/particle-analysis

Titel: On the Effects of the Rejuvenation Treatment on Mechanical and Microstructural Properties of IN-738 Superalloy
verfasst von: Cosimo Monti
Alessandro Giorgetti
Leonardo Tognarelli
Francesco Mastromatteo
Publikationsdatum: 03.04.2017
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 5/2017
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-017-2646-2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5/2017

Plasma-Sprayed Fine-grained Zirconium Silicate and Its Dielectric Properties

Photothermal, Structural, and Microstructural Characterization of SAE4320H Automotive Steel

Dynamic Recrystallization Behavior and Texture Evolution of NiAl Intermetallic During Hot Deformation

A Comparative Study of Constitutive and Neural Network Models for Flow Behavior of Mg-5.9Zn-1.6Zr-1.6Nd-0.9Y Alloy and Processing Maps

Studies on the Biotribological and Biological Behavior of Thermally Oxidized Ti6Al4V for Use in Artificial Cervical Disk

Slow Strain Rate Testing for Hydrogen Embrittlement Susceptibility of Alloy 718 in Substitute Ocean Water

Premium Partner

Marktübersichten