nach oben

Arabian Journal for Science and Engineering

Erschienen in:

19.09.2022 | Research Article-Petroleum Engineering

Mechanical Behavior and Failure Mechanism of Solid Expandable Tubular Crossing Active Strike-Slip Fault

verfasst von: Xiaohua Zhu, Feilong Cheng, Changshuai Shi

Erschienen in: Arabian Journal for Science and Engineering | Ausgabe 7/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Fault slip will directly affect the technical performance of solid expandable tubular (SET). However, there are few researches on the mechanical behavior of shear failure when SET crosses the slip fault. In response to the above problems, this paper builds a three-dimensional dynamic tube-rock system numerical model that considers nonlinear frictional contact and fault slip based on the SET material constitutive model, Coulomb friction, and shale layer rock. The purpose is to reveal the influence of fault slip on the mechanical behavior of SET and to analyze the risk point of SET failure. The results of the study show that as the amount of fault slip increases, the maximum value of the Mises stress of SET appears in the direction perpendicular to the amount of fault slip (90°). With the increase in the number of faults, the shear stress distribution on the cross section hardly changes, and the shear stress distribution on the fault plane presents a "8" shape. When the included angle is 60°, the shear stress on the shear plane is the largest and the shear distribution is the most uneven. The research results of this paper provide a theoretical basis for the slip shear of SET.

Vorheriger Artikel Theoretical Analysis and Optimal Design of a New Rotary Percussion Drilling Method

Nächster Artikel Explicit Neural Network-Based Models for Bubble Point Pressure and Formation Volume Factor Prediction

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Liu, J.: Study on Shale Gas Multi-scale Transport Characteristics and Flow Consistency Mechanism. China University of Mining and Technology, 1–2 (2019)

Guo, X.; Li, J.; Liu, G.: Research on casing deformation for shale gas wells based on focal mechanism. Fau-Bloc Oil & Gas Field 25, 665–669 (2018). https://doi.org/10.6056/dkyqt201805026CrossRef

Daneshy, A.: Impact of Off-Balance Fracturing on Borehole Stability and Casing Failure (2005)

Tian, Z.; Shi, L.; Qiao, L.: Research of and countermeasure for wellbore integrity of shale gas horizontal well. Nat. Gas. Ind. 9, 70–76 (2015). https://doi.org/10.3787/j.issn.1000-0976.2015.09.010CrossRef

Xi, Y.; Li, J.; Liu, G., et al.: Numerical investigation for different casing deformation reasons in Weiyuan-Changning shale gas field during multistage hydraulic fracturing. J. Petrol. Sci. Eng. 163, 691–702 (2018). https://doi.org/10.1016/j.petrol.2017.11.020CrossRef

Yin, F.; Han, L.; Yang, S., et al.: Casing deformation from fracture slip in hydraulic fracturing. J. Petrol. Sci. Eng. 166, 235–241 (2018). https://doi.org/10.1016/j.petrol.2018.03.010CrossRef

Yin, F.; Deng, Y.; He, Y., et al.: Mechanical behavior of casing crossing slip formation in waterflooding oilfields. J. Petrol. Sci. Eng. 167, 796–802 (2018). https://doi.org/10.1016/j.petrol.2017.12.069CrossRef

Yin, F.; Xiao, Y.; Han, L.: Quantifying the induced fracture slip and casing deformation in hydraulically fracturing shale gas wells. J. Petrol. Sci. Eng. 60, 103–111 (2018). https://doi.org/10.1016/j.jngse.2018.10.005CrossRef

Chen, Z.; Shi, L.; Xiang, D.: Mechanism of casing deformation in the Changning- Weiyuan national shale gas demonstration area and counter measures. Nat. Gas. Ind. 36, 70–75 (2017)

10.

Liu, Y.; Feng, M.; Sun, F., et al.: Casing failure characteristics, prevention and control strate gies for mature oilfields. IOP Conf. Ser.: Earth Environ. Sci. 267, 042153 (2020). https://doi.org/10.1088/1755-1315/267/4/042153CrossRef

11.

Wang, S.; Yang, L.: Numerical simulation and influencing factors analysis on casing shear damage in shale layer. China Petrol. Mach. 46, 100–105 (2018)

12.

Guo, X.; Li, J.; Liu, G., et al.: Numerical simulation of casing deformation during volume fracturing of horizontal shale gas wells. J. Petrol. Sci. Eng. 172, 731–742 (2019). https://doi.org/10.1016/j.petrol.2018.08.067CrossRef

13.

Li, Z.; Li, H.; Li, G., et al.: The influence of shale swelling on casing deformation during hydraulic fracturing. J. Petrol. Sci. Eng. 205, 108844 (2021). https://doi.org/10.1016/j.petrol.2021.108844CrossRef

14.

Liu, K.; Talghan, A.: Semianalytical model for fault slippage resulting from partial pressurization. SPE J. 25, 1489–1502 (2020). https://doi.org/10.2118/199348-PACrossRef

15.

Zhang, F.; Yin, Z.; Chen, Z., et al.: Fault reactivation and induced seismicity during multistage hydraulic fracturing: microseismic analysis and geomechanical modeling. SPE J. 25(692), 711 (2020). https://doi.org/10.2118/199883-PACrossRef

16.

Zhu, X.; Cheng, F.; Shi, C., et al.: New design method of SET—Based on collapse strength under plastic formation. Eng. Fail. Anal. 134, 106016 (2022). https://doi.org/10.1016/j.engfailanal.2021.106016CrossRef

17.

Paulo Davim, J.: Introduction to Mechanical Engineering, p. 144–145. Springer, Cham (2018)

18.

Al-Abri, O.S.; Pervez, T.; Qamar, S.Z., et al.: Optimum mandrel configuration for efficient down-hole tube expansion. J. Manuf. Sci. Eng. 6, 1–14 (2015)

19.

Brechan, B., Kornberg, E.: Well Intergrity Model – Klever & Tamano Collapse. Society of Petroleum Engineers, 189395 (2018)

20.

Zhu, X.; Cheng, F.; Shi, C., et al.: Research on collapse failure characteristics and theoretical prediction formulas of solid expandable tubular. Eng. Fail. Anal. 133, 105952 (2022). https://doi.org/10.1016/j.engfailanal.2021.105952CrossRef

21.

Khan, R.: Design and optimization of multistage tubular-mandrel system for down-hole expandable tubular. Arab. J. Sci. Eng. 46, 2083–2095 (2021). https://doi.org/10.1007/s13369-020-05005-4CrossRef

22.

Fu, J.; Tang, X.; Zhou, W., et al.: Dynamic analysis of solid expandable tubular and its applications in tahe oilfield. Arab. J. Sci. Eng. 40, 2437–2446 (2015). https://doi.org/10.1007/s13369-015-1740-8CrossRef

23.

Zhou, X.; Lin, G.; Zhong, Y., et al.: Analysis on anti-collapse ability of oil casing under external non-uniform load and internal pressure. Explor. Eng. (Rock & Soil Drill. Tunn.) 44, 76–80 (2017)

24.

Zhou, X.; He, S.; Guo, Y., et al.: Analysis on collapse resistance of casing under non-uniform elliptic load. Explor. Eng. (Rock & Soil Drill. Tunn.) 41, 16–19 (2014)

25.

Liao, X.; Qi, Y.; Zhu, X., et al.: Failure analysis and solution study of 203mm solid expandable tubular. Eng. Fail. Anal. 106, 104135 (2019). https://doi.org/10.1016/j.engfailanal.2019.08.001CrossRef

26.

Shi, C.; Chen, K.; Zhu, X.: Study on corrosion failure prevention of expanded solid expandable tubular. Eng. Fail. Anal. 121, 105180 (2021). https://doi.org/10.1016/j.engfailanal.2020.105180CrossRef

27.

Zhou, X.; Qian, Q.; Yang, H.: Strength criteria of deep rock mass. Chin. J. Rock-Mech. Eng. 1, 117–123 (2008)

28.

Yin, F.; Han, L.; Chen, Y., et al.: Assessment of casing deformation and optimization of cement sheath performance under fracturing shale gas wells. Petrol. Tubul. Goods Instrum. 4, 41–45 (2020)

29.

Shi, C.; Chen, Y.; Zhu, X.: Applicability evaluation and hysteresis heat effect of rubber constitutive model of PDM stator bushing at high temperature in deep well. Arab. J. Sci. Eng. 44, 6057–6066 (2019). https://doi.org/10.1007/s13369-018-3524-4CrossRef

30.

Zhu, X.; Cheng, F.; Shi, C., et al.: Design and analysis of sealed suspension module based on solid expandable tubular repair technology. J. Mech. Sci. Technol. 34, 681–688 (2020). https://doi.org/10.1007/s12206-019-1215-zCrossRef

31.

Paulo Davim, J.: Mechanical and Industrial Engineering, p. 1–2. Springer, Cham, Heidelberg (2022)CrossRef

32.

Vazouras, P.; Karamanos, S.A.: Structural behavior of buried pipe bends and their effect on pipeline response in fault crossing areas. Bull. Earthq. Eng. 11, 4999–5024 (2017). https://doi.org/10.1007/s10518-017-0148-0CrossRef

Titel: Mechanical Behavior and Failure Mechanism of Solid Expandable Tubular Crossing Active Strike-Slip Fault
verfasst von: Xiaohua Zhu
Feilong Cheng
Changshuai Shi
Publikationsdatum: 19.09.2022
Verlag: Springer Berlin Heidelberg
Erschienen in: Arabian Journal for Science and Engineering / Ausgabe 7/2023
Print ISSN: 2193-567X
Elektronische ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-022-07217-2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7/2023

Performance Comparison of Single and Double Masks: Filtration Efficiencies, Breathing Resistance and CO2 Content

Effects of Total Dissolved Solids on Pressure Drop and Net Driving Pressure in Different Designs of Brackish and Seawater Reverse Osmosis Systems

Thermodynamic Modeling of Saponin Adsorption Behavior on Sandstone Rocks: An Experimental Study

Adsorptive Optimization of Crystal Violet Dye Using Central Composite Rotatable Design and Response Surface Methodology: Statistical Analysis, Kinetic and Isotherm Studies

Application of Laboratory-Grade Recycled Borosilicate Glass Coated with Iron and Cobalt for the Removal of Methylene Blue by Catalytic Ozonation Process

Analysis of Breakthrough Curve Performance Using Theoretical and Empirical Models: Hg2+ Removal by Bone Char from Synthetic and Real Water

Premium Partner

Marktübersichten