nach oben

Journal of Material Cycles and Waste Management

Erschienen in:

02.01.2021 | ORIGINAL ARTICLE

Material cycle realization by hazardous phosphogypsum waste, ferrous slag, and lime production waste application to produce sustainable construction materials

verfasst von: Vsevolod Mymrin, Elaman K. Aibuldinov, Monica A. Avanci, Kirill Alekseev, Marco A. Argenda, Karina Q. Carvalho, Alexandre Erbs, Rodrigo E. Catai

Erschienen in: Journal of Material Cycles and Waste Management | Ausgabe 2/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The article presents data from new compositions of construction materials developed from three types of Kazakhstan enterprises’ industrial waste—highly alkaline (pH = 13.5) hazardous sludge of phosphogypsum (PG) waste from Karatau deposits (52–78 wt.%), ground-cooled converter slag (CS) from Karaganda Metallurgical Plant (20–45%), and lime production waste (LPW) from a small plant near Astana (2%). This research aimed to develop new compositions of materials, which correspond to Kazakhstan’s mechanical and environmental standards, to study the processes of new composites’ structure formation in the process of their hydration and resistance strengthening. The axial compressive-resistance values of the developed composites reached 5.3–6.8–9.6 and 14.9 MPa after 3, 7, 14, and 550 days of hydration, respectively; the values of the coefficient of linear expansion were in the range of 0.23 and 3.14%, and those of water absorption between 8.2 and 18.4%. The formation processes of the materials’ structure were studied by the XRD, SEM, EDS, AAS, and LAMMA methods. The analyses of the solubility and leaching of metals by the AAS method showed the compliance of the new compositions with Kazakhstan’s sanitary standards.

Vorheriger Artikel Feasibility of platinum recovery from waste automotive catalyst with different carriers via cooperative smelting-collection process

Nächster Artikel Spent coffee ground-based interfacial solar steam generation

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Hawking SW (2018) http://www.independent.co.uk/news/science/stephen-hawking-pollution-stupidity-artifical-intelligence-warfare-biggest-threats-mankind-a7106916.html

Yang JL et al (2009) Preparation of load-bearing building materials from autoclaved phosphogypsum. J Constr Build Mat 23:687–693CrossRef

Gennari RF et al (2011) Phosphogypsum analysis: total content and extractable element concentrations. Int Nuclear Atlantic Conference - INAC 2011, Belo Horizonte, MG, Brazil

Federal Register (1990) National emission standards for radon emission from phosphogypsum stacks, 55: 40834

Kelly AR et al (2002) Stabilization of phosphogypsum using class C fly ash and lime: assessment of the potential for marine applications. J Hazard Mater 93:167–186CrossRef

Sen T, Mishra U (2010) Usage of industrial waste products in village road construction. Int J Environ Sci Dev 1:122–126CrossRef

Chen X et al (2018) Effect of neutralization on the setting and hardening characters of hemihydrate phosphogypsum plaster. J Constr Build Mater 190:53–64. https://doi.org/10.1016/j.conbuildmat.2018.09.095CrossRef

Chen Q et al (2017) Utilization of phosphogypsum and phosphate tailings for cemented. J Environ Manag 201:19–27. https://doi.org/10.1016/j.jenvman.2017.06.027CrossRef

Gijbels K et al (2019) Feasibility of incorporating phosphogypsum in ettringite-based binder from ladle slag. J Clean Prod 237:117793. https://doi.org/10.1016/j.jclepro.2019.117793CrossRef

10.

Taher MA (2007) Influence of thermally treated phosphogypsum on the properties of Portland slag cement. Resour Conserv Recycl 52:28–38CrossRef

11.

Contreras M et al (2018) Influence of the addition of phosphogypsum on some properties of ceramic tiles. J Constr Build Mater 175:588–600. https://doi.org/10.1016/j.conbuildmat.2018.04.131nCrossRef

12.

Nizevičienė D et al (2016) Effects of waste fluid catalytic cracking on the properties of semi-hydrate phosphogypsum. J Clean Prod 137:150–156. https://doi.org/10.1016/j.jclepro.2016.07.037CrossRef

13.

Yang L et al (2016) Utilization of original phosphogypsum as raw material for the preparation of self-leveling mortar. J Clean Prod 127:204–213. https://doi.org/10.1016/j.jclepro.2016.04.054CrossRef

14.

Wang Q et al (2020) Study on the improvement of the waterproof and mechanical properties of hemihydrate phosphogypsum-based foam insulation materials. J Constr Build Mater 230:117014. https://doi.org/10.1016/j.conbuildmat.2019.117014CrossRef

15.

Rychkov VN et al (2018) Recovery of rare earth elements from phosphogypsum. J Clean Prod 196:674–681. https://doi.org/10.1016/j.jclepro.2018.06.114CrossRef

16.

Rosales J et al (2020) Treated phosphogypsum as an alternative set regulator and mineral addition in cement production. J Clean Prod 20:118752. https://doi.org/10.1016/j.jclepro.2019.118752CrossRef

17.

Vaičiukynienė D et al (2018) Effect of phosphogypsum on the stability upon firing treatment of alkali-activated slag. J Constr Build Mater 184:85–491. https://doi.org/10.1016/j.conbuildmat.2018.06.213CrossRef

18.

Szajerski P et al (2019) Quantitative evaluation and leaching behavior of cobalt immobilized in sulfur polymer concrete composites based on lignite fly ash, slag and phosphogypsum. J Clean Prod 222:90–102. https://doi.org/10.1016/j.jclepro.2019.03.010CrossRef

19.

Ma B et al (2020) Utilization of hemihydrate phosphogypsum for the preparation of porous sound absorbing material. J Constr Build Mater 234:117346. https://doi.org/10.1016/j.conbuildmat.2019.117346CrossRef

20.

Mattiello EM et al (2016) Soluble phosphate fertilizer production using acid effluent from metallurgical industry. J Environ Manag 166:140–146. https://doi.org/10.1016/j.jenvman.2015.10.012CrossRef

21.

Sahu S et al (2014) Natural radioactivity assessment of a phosphate fertilizer plant area. J Radiat Res Appl Sci 7:123–128. https://doi.org/10.1016/j.jrras.2014.01.001CrossRef

22.

Al-Hwaiti M, Al-Khashman O (2015) Health risk assessment of heavy metals contamination in tomato and green pepper plants grown in soils amended with phosphogypsum waste materials. J Environ Geochem Health 37:287–304. https://doi.org/10.1007/s10653-014-9646-zCrossRef

23.

Mohammed F et al (2018) Sustainability assessment of symbiotic processes for the reuse of phosphogypsum. J Clean Prod 188:497–507. https://doi.org/10.1016/j.jclepro.2018.03.309CrossRef

24.

World Steel Association (2019) https://www.worldsteel.org/en/dam/jcr:1b916a6d-06fd-4e84-b35d-c1d911d18df4/Fact_By-products_2018.pdf

25.

Guo J et al (2018) Steel slag in China: treatment, recycling, and management. J Waste Manag 78:318–330. https://doi.org/10.1016/j.wasman.2018.04.045CrossRef

26.

Zouboulis A (2004) Biosorption of toxic metals from aqueous solutions by bacteria strains isolated from metal-polluted soils. J Process Biochem 39:909–916CrossRef

27.

Kumar S et al (2008) Mechanical activation of granulated blast furnace slag and its effect on the properties and structure of portland slag cement. J Cem Concr Compos 30:679–685CrossRef

28.

Cao L et al (2019) Process to utilize crushed steel slag in cement industry directly: multi-phased clinker sintering technology. J Clean Prod 217:520–529. https://doi.org/10.1016/j.jclepro.2019.01.260CrossRef

29.

Mymrin VA (1987) The theoretical basis for the resistance strengthening of clay soils dump slags ferrous metallurgy to create the foundations of roads. Diss Dr Geol Miner Sci, Moscow State University (MGU) Lomonosov Moscow

30.

Liu ZB et al (2014) Effect of (CaO+MgO)/SiO₂ ratio on crystallisation and properties of slag glass–ceramics. J Adv Appl Ceram 113:411–418CrossRef

31.

Li X et al (2019) Separation and purification of silicon from cutting kerf-loss slurry waste by electromagnetic and slag treatment technology. J Clean Prod 211:695–703. https://doi.org/10.1016/j.jclepro.2018.11.195CrossRef

32.

Wang L et al (2017) Recovery of rare earths and aluminum from FCC catalysts manufacturing slag by stepwise leaching and selective precipitation. J Environ Chem Eng 5:3711–3718. https://doi.org/10.1016/j.jece.2017.07.018CrossRef

33.

Mombelli D et al (2018) Characterization of cast iron and slag produced by jarosite sludges reduction via Arc Transferred Plasma (ATP) reactor. J Environ Chem Eng 6:773–783. https://doi.org/10.1016/j.jece.2018.01.006CrossRef

34.

Jamshidi A et al (2015) Analysis of structural performance and sustainability of airport concrete pavements incorporating blast furnace slag. J Clean Prod 90:195–210CrossRef

35.

Etxeberria M et al (2010) Properties of concrete using metallurgical industrial by-products as aggregates. J Constr Build Mater 24:1594–1600CrossRef

36.

Lübeck A et al (2012) Compressive resistance and electrical properties of concrete with white Portland cement and blast-furnace slag. J Cem Concr Compos 34:392–399CrossRef

37.

Özbay E et al (2016) Utilization and efficiency of ground granulated blast furnace slag on concrete properties. A Rev J Constr Build Mater 105:423–434CrossRef

38.

Monosi S et al (2016) Electric arc furnace slag as natural aggregate replacement in concrete production. J Cem Concr Comp 66:66–72CrossRef

39.

Yeih W et al (2015) Properties of pervious concrete made with air-cooling electric arc furnace slag as aggregates. J Con Buil Mat 93:737–774MathSciNetCrossRef

40.

Bhatty J, Gajda I (2004) Alternative materials. J. World Cem 35:41–48

41.

Mymrin V (2012) Industrial and municipal wastes utilization as economical and environment efficient raw materials, http://paginapessoal.utfpr.edu.br/mymrinev

42.

CN-25–74(2011) Instructions for the use of soils, reinforced with binders, for the construction of foundations and roads and airfields. Moscow

43.

Ramachandran VS et al (2002) Handbook of Thermal Analysis of Construction Materials. DOI: https://doi.org/10.1016/S0040-6031(03)00230-2

44.

GOST 9179-77 (2018). Building Lime Technical Conditions. Lime for building purposes. Specifications

45.

GOST 530-2012 (2018) Ceramis brick and stone. General specifications. Astana, Kazakhstan

46.

PDK SanPiN 2.1.7.1287-03 (2003) Sanitary and epidemiological requirements for soil quality. Astana, Kazakhstan

Titel: Material cycle realization by hazardous phosphogypsum waste, ferrous slag, and lime production waste application to produce sustainable construction materials
verfasst von: Vsevolod Mymrin
Elaman K. Aibuldinov
Monica A. Avanci
Kirill Alekseev
Marco A. Argenda
Karina Q. Carvalho
Alexandre Erbs
Rodrigo E. Catai
Publikationsdatum: 02.01.2021
Verlag: Springer Japan
Erschienen in: Journal of Material Cycles and Waste Management / Ausgabe 2/2021
Print ISSN: 1438-4957
Elektronische ISSN: 1611-8227
DOI: https://doi.org/10.1007/s10163-020-01147-7

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2021

Investigation of conventional analytical methods for determining conversion of polyethylene terephthalate waste degradation via aminolysis process

Engineering performance of high-content MgO-Alkali-activated slag mortar incorporating fine recycled concrete aggregate and fly ash

Comprehensive utilization of residues of Magnolia officinalis based on fiber characteristics

An IoT-based bin level monitoring system for solid waste management

Inoculation of environmental fungal isolates improve the methane biochemical potential of rice hulls in anaerobic digestion processes

Organizational issues for disseminating recycling technologies of carbon fiber-reinforced plastics in the Japanese industrial landscape