nach oben

Journal of Material Cycles and Waste Management

Erschienen in:

15.09.2022 | ORIGINAL ARTICLE

Mechanical and thermo-physical characterization of mortars made with uncontaminated marine sediments

verfasst von: Amani Abdallah, Hassina Kada, Abdelwaheb Amrouche

Erschienen in: Journal of Material Cycles and Waste Management | Ausgabe 6/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In a context of sustainable development, civil engineering must increasingly use recyclable materials to preserve natural resources. Sediments could be a solution in the context of their recovery in several areas. Uncontaminated marine sediments were used to partially substitute sand aggregate in the formulation of mortars. Five mortars were manufactured with different percentages of sand substitution. Physical, chemical, mineralogy, and mechanical characterization were carried out in order to investigate their possible use and impact in cemented-based materials. The mechanical strengths and the elastic modulus of mortars were analyzed. The hydration kinetics of the mortars were studied at different temperatures. The acceleration of the chemical reactions was also assessed through the determination of the apparent activation energy of mortars. Finally, the microstructure of two formulations of mortars was observed by Scanning Electron Microscope (SEM). Results show a drop of the mechanical properties with the increase of the percentage of substitution. This can be attributed to the natural composition of sediments and to the increase of the total porosity of the mixtures. The measured heat released of mortars increase with the increase of sediment content. This result suggests an additional chemical activity linked to the presence of sediments within the matrix.

Vorheriger Artikel Methane production potential from anaerobic digestion of plant biomass residues and food waste as substrates

Nächster Artikel Analysis of factors influencing waste separation behavior of Hanoi citizens with consideration to societal elements

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

R. Boutin (1999), “Amélioration des connaissances sur le comportement des rejets en mer de produits de dragage de type vase : phénomènes à court terme et dans le champ proche,” thesis, Lyon, INSA.

Junakova N, Junak J, Balintova M (2015) Reservoir sediment as a secondary raw material in concrete production. Clean Techn Environ Policy 17(5):1161–1169. https://doi.org/10.1007/s10098-015-0943-8CrossRef

Rozière E, Samara M, Loukili A, Damidot D (2015) Valorisation of sediments in self-consolidating concrete: mix-design and microstructure. Constr Build Mater 81:1–10. https://doi.org/10.1016/j.conbuildmat.2015.01.080CrossRef

He J, Shi X, Li Z, Zhang L, Feng X, Zhou L (2020) Strength properties of dredged soil at high water content treated with soda residue, carbide slag, and ground granulated blast furnace slag. Constr Build Mater 242:118126. https://doi.org/10.1016/j.conbuildmat.2020.118126CrossRef

Hamer K, Karius V (2002) Brick production with dredged harbour sediments. an industrial-scale experiment. Waste Manage 22(5):521–530. https://doi.org/10.1016/S0956-053X(01)00048-4CrossRef

Cappuyns V, Deweirt V, Rousseau S (2015) Dredged sediments as a resource for brick production: possibilities and barriers from a consumers’ perspective. Waste Manage 38:372–380. https://doi.org/10.1016/j.wasman.2014.12.025CrossRef

Xu Y, Yan C, Xu B, Ruan X, Wei Z (2014) The use of urban river sediments as a primary raw material in the production of highly insulating brick. Ceram Int 40(6):8833–8840. https://doi.org/10.1016/j.ceramint.2014.01.105CrossRef

Samara M, Lafhaj Z, Chapiseau C (2009) Valorization of stabilized river sediments in fired clay bricks: factory scale experiment. J Hazard Mater 163(2):701–710. https://doi.org/10.1016/j.jhazmat.2008.07.153CrossRef

Aouad G, Laboudigue A, Gineys N, Abriak NE (2012) Dredged sediments used as novel supply of raw material to produce Portland cement clinker. Cem Concr Compos 34(6):788–793. https://doi.org/10.1016/j.cemconcomp.2012.02.008CrossRef

10.

Dalton JL, Gardner KH, Seager TP, Weimer ML, Spear JCM, Magee BJ (2004) Properties of Portland cement made from contaminated sediments. Resour Conserv Recycl 41(3):227–241. https://doi.org/10.1016/j.resconrec.2003.10.003CrossRef

11.

Wang D, Abriak NE, Zentar R (2017) Dredged marine sediments used as novel supply of filling materials for road construction. Marine Georesources Geotechnol 35(4):472–480. https://doi.org/10.1080/1064119X.2016.1198945CrossRef

12.

Rekik B, Boutouil M (2009) Geotechnical properties of dredged marine sediments treated at high water/cement ratio. Geo-Mar Lett 29(3):171–179. https://doi.org/10.1007/s00367-009-0134-xCrossRef

13.

Siham K, Fabrice B, Edine AN, Patrick D (2008) Marine dredged sediments as new materials resource for road construction. Waste Manage 28(5):919–928. https://doi.org/10.1016/j.wasman.2007.03.027CrossRef

14.

Wang D, Abriak N-E, Zentar R, Xu W (2012) Solidification/stabilization of dredged marine sediments for road construction. Environ Technol. 33:95–101. https://doi.org/10.1080/09593330.2011.551840CrossRef

15.

Dubois V, Abriak NE, Zentar R, Ballivy G (2009) The use of marine sediments as a pavement base material. Waste Manage 29(2):774–782. https://doi.org/10.1016/j.wasman.2008.05.004CrossRef

16.

Zentar R, Dubois V, Abriak NE (2008) Mechanical behaviour and environmental impacts of a test road built with marine dredged sediments. Resour Conserv Recycl 52(6):947–954. https://doi.org/10.1016/j.resconrec.2008.02.002CrossRef

17.

Ennahal I, Maherzi W, Mamindy-Pajany Y, Benzerzour M, Abriak N-E (2019) Eco-friendly polymers mortar for floor covering based on dredged sediments of the north of France. J Mater Cycles Waste Manag 21(4):861–871. https://doi.org/10.1007/s10163-019-00843-3CrossRef

18.

Couvidat J, Benzaazoua M, Chatain V, Bouamrane A, Bouzahzah H (2016) Feasibility of the reuse of total and processed contaminated marine sediments as fine aggregates in cemented mortars. Constr Build Mater 112:892–902. https://doi.org/10.1016/j.conbuildmat.2016.02.186CrossRef

19.

Meyer C (2009) The greening of the concrete industry. Cem Concr Compos 31(8):601–605. https://doi.org/10.1016/j.cemconcomp.2008.12.010CrossRef

20.

Kasmi A, Abriak N-E, Benzerzour M, Azrar H (2017) Environmental impact and mechanical behavior study of experimental road made with river sediments: recycling of river sediments in road construction. J Mater Cycles Waste Manag 19(4):1405–1414. https://doi.org/10.1007/s10163-016-0529-5CrossRef

21.

Benslafa FKA, Kerdal D, Ameur M, Mekerta B, Semcha A (2015) Durability of mortars made with dredged sediments. Procedia Eng 118:240–250. https://doi.org/10.1016/j.proeng.2015.08.423CrossRef

22.

Zhao Z, Benzerzour M, Abriak N-E, Damidot D, Courard L, Wang D (2018) Use of uncontaminated marine sediments in mortar and concrete by partial substitution of cement. Cement Concr Compos 93:155–162. https://doi.org/10.1016/j.cemconcomp.2018.07.010CrossRef

23.

Benzerzour M, Maherzi W, Mouhamadou AA, Amar N-E, Damidot D (2018) Formulation of mortars based on thermally treated sediments. J Mater Cycles Waste Manag 20(1):592–603. https://doi.org/10.1007/s10163-017-0626-0CrossRef

24.

Benzerzour M, Amar M, Abriak N-E (2017) New experimental approach of the reuse of dredged sediments in a cement matrix by physical and heat treatment. Constr Build Mater 140:432–444. https://doi.org/10.1016/j.conbuildmat.2017.02.142CrossRef

25.

Amar M, Benzerzour M, Safhi AEM, Abriak N-E (2018) Durability of a cementitious matrix based on treated sediments. Case Stud Constr Mater 8:258–276. https://doi.org/10.1016/j.cscm.2018.01.007CrossRef

26.

Benkaddour M, Kazi Aoual F, Semcha A (2009) Durabilité des mortiers à base de pouzzolane naturelle et de pouzzolane artificielle. Rev Nat Tecnol 1(1):63–73

27.

Dang TA, Kamali-Bernard S, Prince WA (2013) Design of new blended cement based on marine dredged sediment. Constr Build Mater 41:602–611. https://doi.org/10.1016/j.conbuildmat.2012.11.088CrossRef

28.

Agostini F, Davy CA, Skoczylas F, Dubois Th (2010) Effect of microstructure and curing conditions upon the performance of a mortar added with treated sediment aggregates (TSA). Cem Concr Res 40(11):1609–1619. https://doi.org/10.1016/j.cemconres.2010.07.003CrossRef

29.

Agostini F, Skoczylas F, Lafhaj Z (2007) About a possible valorisation in cementitious materials of polluted sediments after treatment. Cement Concr Compos 29(4):270–278. https://doi.org/10.1016/j.cemconcomp.2006.11.012CrossRef

30.

Chen QY, Tyrer M, Hills CD, Yang XM, Carey P (2009) Immobilisation of heavy metal in cement-based solidification/stabilisation: a review. Waste Manag 29(1):390–403. https://doi.org/10.1016/j.wasman.2008.01.019CrossRef

31.

Gardner KH, Tsiatsios CJ, Melton J, Seager TP (2007) Leaching behavior of estuarine sediments and cement-stabilized sediments in upland management environments. Waste Manag 27(11):1648–1654. https://doi.org/10.1016/j.wasman.2006.09.002CrossRef

32.

Paria S, Yuet PK (2011) Solidification–stabilization of organic and inorganic contaminants using portland cement: a literature review. Environ Rev. https://doi.org/10.1139/a06-004CrossRef

33.

Zentar R, Wang D, Abriak NE, Benzerzour M, Chen W (2012) Utilization of siliceous–aluminous fly ash and cement for solidification of marine sediments. Constr Build Mater 35:856–863. https://doi.org/10.1016/j.conbuildmat.2012.04.024CrossRef

34.

Benzaazoua M, Fall M, Belem T (2004) A contribution to understanding the hardening process of cemented pastefill. Miner Eng 17(2):141–152. https://doi.org/10.1016/j.mineng.2003.10.022CrossRef

35.

Yan DYS, Tang IY, Lo IMC (2014) Development of controlled low-strength material derived from beneficial reuse of bottom ash and sediment for green construction. Constr Build Mater 64:201–207. https://doi.org/10.1016/j.conbuildmat.2014.04.087CrossRef

36.

Sétra Amatr (2012), Guide méthodologique : Acceptabilité de Matériaux Alternatifs en Techniques Routière, Evaluation environnementale.

37.

EN 196–1:(2005), Standard Methods of Testing Cement - Part 1: Determination of Strength, CEN.

38.

H. Kada-Benameur (1998), “Techniques de mesures fluxmétriques appliquées à l’étude de la cinétique d’hydratation des bétons : calorimétrie isotherme et mesures directes sur ouvrages,” These de doctorat, Artois.

39.

Kada-Benameur H, Wirquin E, Duthoit B (2000) Determination of apparent activation energy of concrete by isothermal calorimetry. Cem Concr Res 30(2):301–305. https://doi.org/10.1016/S0008-8846(99)00250-1CrossRef

40.

Wirquin E, Broda M, Duthoit B (2002) Determination of the apparent activation energy of one concrete by calorimetric and mechanical means: influence of a superplasticizer. Cem Concr Res 32(8):1207–1213. https://doi.org/10.1016/S0008-8846(02)00770-6CrossRef

41.

AFNOR, NF EN 12664 (2001), Performance thermique des matériaux et produits pour le batiment, Determination de la résistance thermique par la méthode de la plaque chaude gardée et la méthode fluxmétrique.

42.

Nielsen LF (1993) Strength development in hardened cement paste: examination of some empirical equations. Mater Struct 26(5):255–260. https://doi.org/10.1007/BF02472946CrossRef

43.

M. Amar (2017), “Traitement des sédiments de dragage pour une valorisation dans les matrices cimentaires,” These de doctorat, Lille 1.

44.

J. G. Ndong Engone (2015), “Développement de matériaux cimentaires à base de sous-produits bois : mise en forme par extrusion et vibrocompactage,” These de doctorat, Artois.

45.

Demirboǧa R (2003) Influence of mineral admixtures on thermal conductivity and compressive strength of mortar. Energy Build 35(2):189–192. https://doi.org/10.1016/S0378-7788(02)00052-XCrossRef

46.

Shafigh P, Asadi I, Akhiani AR, Mahyuddin NB, Hashemi M (2020) Thermal properties of cement mortar with different mix proportions. Mater Construcc 70:339–224. https://doi.org/10.3989/mc.2020.09219CrossRef

47.

Tremblay H, Duchesne J, Locat J, Leroueil S (2002) Influence of the nature of organic compounds on fine soil stabilization with cement. Can Geotech J 39:535–546. https://doi.org/10.1139/t02-002CrossRef

48.

Beddaa H, BenFraj A, Lavergne F, Torrenti JM (2019) Effect of potassium humate as humic substances from river sediments on the rheology, the hydration and the strength development of a cement paste. Cem Concr Compos 104:12. https://doi.org/10.1016/j.cemconcomp.2019.103400CrossRef

49.

Arliguie G, Grandet J (1990) Influence de la composition d’un ciment portland sur son hydration en presence de zinc. Cem Concr Res 20(4):517–524. https://doi.org/10.1016/0008-8846(90)90096-GCrossRef

50.

Minocha AK, Jain N, Verma CL (2003) Effect of organic materials on the solidification of heavy metal sludge. Constr Build Mater 17(2):77–81. https://doi.org/10.1016/S0950-0618(02)00098-3CrossRef

51.

Park C-K (2000) Hydration and solidification of hazardous wastes containing heavy metals using modified cementitious materials. Cem Concr Res 30(3):429–435. https://doi.org/10.1016/S0008-8846(99)00272-0CrossRef

52.

Bhatty JI and Portland Cement Association (1995), Role of minor elements in cement manufacture and use. Skokie, Ill.: Portland Cement Association.

53.

Malviya R, Chaudhary R (2006) Factors affecting hazardous waste solidification/stabilization: a review. J Hazard Mater 137(1):267–276. https://doi.org/10.1016/j.jhazmat.2006.01.065CrossRef

54.

Minocha A, Jain N, Verma CL (2003) Effect of inorganic materials on the solidification of heavy metal sludge. Cem Concr Res 33:1695–1701. https://doi.org/10.1016/S0008-8846(03)00146-7CrossRef

55.

Carlos A, Arruda A, Silva T, Carvalho P, Trautwein L (2017) Influence of coarse aggregate on concrete’s elasticity modulus. Acta Sci Technol 39:17–25. https://doi.org/10.4025/actascitechnol.v39i1.29873CrossRef

56.

J. Perreault-Chabot (2010), “Modélisation de la pénétration des chlorures dans les stationnements multiétagés,”, https://corpus.ulaval.ca/jspui/handle/20.500.11794/21347.

57.

Neville A (2004) The confused world of sulfate attack on concrete. Cem Concr Res 34(8):1275–1296. https://doi.org/10.1016/j.cemconres.2004.04.004CrossRef

58.

Regourd M. (1975) L’action de l’eau de mer sur les ciments ». Annales de l’ITBTP, supplément au n° 329, Série « Liants hydrauliques » n° 329, p 86–102

59.

Bonnell DGR, Nottage ME (1939) Studies in porous materials with special reference to building materials: I. The crystallisation of salts in porous materials. J Soc Chem Ind 58:16–21

60.

La durabilité des bétons. Bases scientifiques pour la formulation de bétons durables dans leur environnement, Chapitres 2–3–12, Jean-Pierre Ollivier, Angélique Vichot.

61.

Cheng S, Shui Z, Sun T, Yu R, Zhang G (2018) Durability and microstructure of coral sand concrete incorporating supplementary cementitious materials. Constr Build Mater 171:44–53. https://doi.org/10.1016/j.conbuildmat.2018.03.082CrossRef

62.

N. T. Tran (2009), “Valorisation de sédiments marins et fluviaux en technique routière,” These de doctorat, Artois.

63.

F. Marot (1997), “Caractérisation et traitement de sédiments de dragage contenant des polluants métalliques,” These de doctorat, Le Havre.

64.

J. Bresson (1980), “La prévision des résistances des produits en béton : Facteur de maturité - Temps équivalent”. Publication Technique N° 56.

65.

V. Waller (1999), “Relations entre composition des betons, exothermie en cours de prise et resistance en compression,” phdthesis, Ecole des Ponts.

66.

Asadi I, Shafigh P, Abu Hassan ZFB, Mahyuddin NB (2018) Thermal conductivity of concrete – a review. J Build Eng 20:81–93. https://doi.org/10.1016/j.jobe.2018.07.002CrossRef

67.

Uysal H, Demirboğa R, Şahin R, Gül R (2004) The effects of different cement dosages, slumps, and pumice aggregate ratios on the thermal conductivity and density of concrete. Cem Concr Res 34(5):845–848. https://doi.org/10.1016/j.cemconres.2003.09.018CrossRef

68.

Demirboğa R, Türkmen İ, Burhan Karakoç M (2007) Thermo-mechanical properties of concrete containing high-volume mineral admixtures. Build Environ 42(1):349–354. https://doi.org/10.1016/j.buildenv.2005.08.027CrossRef

Titel: Mechanical and thermo-physical characterization of mortars made with uncontaminated marine sediments
verfasst von: Amani Abdallah
Hassina Kada
Abdelwaheb Amrouche
Publikationsdatum: 15.09.2022
Verlag: Springer Japan
Erschienen in: Journal of Material Cycles and Waste Management / Ausgabe 6/2022
Print ISSN: 1438-4957
Elektronische ISSN: 1611-8227
DOI: https://doi.org/10.1007/s10163-022-01497-4

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2022

Utilization of CO2 into recycled construction materials: A systematic literature review

Production of artificial aggregates by granulation and carbonation of recycled concrete fines

Utilization of river sediment, sewage sludge and wheat straw as the primary raw material in sintered-shale bricks

New method for producing carbon foam from recycled carbon (NEWCAFO)

Effects of particle size on structural, physical, mechanical and tribology behaviour of agricultural waste (corncob micro/nano-filler) based epoxy biocomposites

Brazilian banana, guava, and orange fruit and waste production as a potential biorefinery feedstock