nach oben

Journal of Materials Science

Erschienen in:

03.05.2021 | Composites & nanocomposites

Mechanical, dynamic mechanical and thermal properties of TiO₂ nanoparticles treatment bamboo fiber-reinforced polypropylene composites

verfasst von: Juan Guo, Mengdan Cao, Wenting Ren, Hankun Wang, Yan Yu

Erschienen in: Journal of Materials Science | Ausgabe 22/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

To obtain better interfacial bonding between bamboo fibers (BFs) and matrix polypropylene (PP), PP/BFs composites were prepared by means of modifying BFs with TiO₂ nanoparticles. The static mechanical and dynamic mechanical properties, thermal properties, morphology and water resistance of the fabricated composites were characterized. The results showed the static and dynamic mechanical properties, thermal stability and water resistance of the composite were all improved at different extents by the introduction of TiO₂ nanoparticles, especially with the addition of 0.4 wt% TiO₂ nanoparticles (PP/BF/T3). The performances enhancement of TiO₂ nanoparticles modified composites was mainly attributed to the interfacial bonding improvement, demonstrated by the Cole–Cole curves of dynamic mechanical analysis and the morphological analysis of fracture surface, as well as the increased crystallinity revealed with differential scanning calorimetry measurements.

Graphical abstract

Vorheriger Artikel Effect of carbon backbone on luminescence properties of Eu-organic hybrid thin films prepared by ALD/MLD

Nächster Artikel Electro-optical properties and frequency response of polymer-dispersed liquid crystal gratings doped with multi-walled carbon nanotubes

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Lian C, Liu R, Luo J, Yang F, Zhang S, Fei B (2020) The morphological characteristics and classification of vascular parenchyma cells in bamboo, Phyllostachys edulis (Carr.). J Houz Holzforschung 74:1–10. https://doi.org/10.1515/hf-2019-0241CrossRef

Hsu CY, Yang TC, Wu TL, Hung KC, Wu JH (2018) The influence of bamboo fiber content on the non-isothermal crystallization kinetics of bamboo fiber-reinforced polypropylene composites (BPCs). Holzforschung 72:329–336. https://doi.org/10.1515/hf-2017-0046CrossRef

Jariwala H, Jain P (2019) A review on mechanical behavior of natural fiber reinforced polymer composites and its applications. J Reinf Plast Comp. https://doi.org/10.1177/0731684419828524CrossRef

Kumar N, Mireja S, Khandelwal V, Arun B, Manik G (2017) Light-weight high-strength hollow glass microspheres and bamboo fiber based hybrid polypropylene composite: a strength analysis and morphological study. Compos Part B-Eng 109:1–22. https://doi.org/10.1016/j.compositesb.2016.10.052CrossRef

Liew FK, Hamdan S, Rahman MR, Rusop M, Khan A (2020) Thermo-mechanical properties of jute/bamboo/polyethylene hybrid composites: the combined effects of silane coupling agent and copolymer. Polym Composite. https://doi.org/10.1002/pc.25755CrossRef

Xie J, Qi J, Hu T, De Hoop CF, Hse CY, Shupe TF (2016) Effect of fabricated density and bamboo species on physical-mechanical properties of bamboo fiber bundle reinforced composites. J Mater Sci 51:7480–7490. https://doi.org/10.1007/s10853-016-0024-3CrossRef

Safwan A, Jawaid M, Sultan MTH, Hassan A (2018) Preliminary study on tensile and impact properties of Kenaf/bamboo fiber reinforced epoxy composites. J Renew Mater. https://doi.org/10.7569/JRM.2018.634103CrossRef

Depuydt DEC, Billington L, Fuentes C, Sweygers N, Dupont C, Appels L, Ivens J, Van VAW (2019) European bamboo fibres for composites applications, study on the seasonal influence. Ind Crops Prod 133:304–316. https://doi.org/10.1016/j.indcrop.2019.03.026CrossRef

Wang F, Yang M, Zhou S, Ran S, Zhang J (2018) Effect of fiber volume fraction on the thermal and mechanical behavior of polylactide-based composites incorporating bamboo fibers. J Appl Polym Sci 135:46148. https://doi.org/10.1002/app.46148CrossRef

10.

Zakikhani P, Zahari R, Sultan MTH, Majid DL (2014) Extraction and preparation of bamboo fibre-reinforced composites. Mater Design 63:820–828. https://doi.org/10.1016/j.matdes.2014.06.058CrossRef

11.

Mahir FI, Keya KN, Sarker B, Nahiun KM, Khan RA (2019) A brief review on natural fiber used as a replacement of synthetic fiber in polymer composites. Mater Eng Res 1:88–99. https://doi.org/10.25082/MER.2019.02.007CrossRef

12.

Biswas S, Shahinur S, Hasan M, Ahsan Q (2015) Physical, mechanical and thermal properties of jute and bamboo fiber reinforced unidirectional epoxy composites. Proc Eng 105:933–939. https://doi.org/10.1016/j.proeng.2015.05.118CrossRef

13.

Li Y, Jiang LY, Xiong CD, Peng WJ (2015) Effect of different surface treatment for bamboo fiber on the crystallization behavior and mechanical property of bamboo fiber/nanohydroxyapatite/poly(lactic-co-glycolic) composite. Ind Eng Chem Res 54:12017–12024. https://doi.org/10.1021/acs.iecr.5b02724CrossRef

14.

Tang S, Jiang L, Ma B, Tang C, Su S (2020) Preparation and characterization of bamboo fiber/chitosan/nano-hydroxyapatite composite membrane by ionic crosslinking. Cellulose 4:1–12. https://doi.org/10.1007/s10570-020-03145-2CrossRef

15.

Wang CC, Cai L, Shi SQ, Wang G, Cheng HT, Zhang SB (2019) Thermal and flammable properties of bamboo pulp fiber/high-density polyethylene composites: influence of preparation technology, nano calcium carbonate and fiber content. Renewable Energy 134(4):436–445. https://doi.org/10.1016/j.renene.2018.09.051CrossRef

16.

Fei P, Xiong HG, Cai J, Liu C, Zia-ud-Din YuY (2016) Enhanced the weatherability of bamboo fiber-based outdoor building decoration materials by rutile nano-TiO₂. Constr Build Mater 114:307–316. https://doi.org/10.1016/j.conbuildmat.2016.03.166CrossRef

17.

Chaudhary V, Ahmad F (2020) A review on plant fiber reinforced thermoset polymers for structural and frictional composites. Polym Testing 91:106792. https://doi.org/10.1016/j.polymertesting.2020.106792CrossRef

18.

Rahman MR, Hamdan S, Hashim DMA, Islam MS, Takagi H (2015) Bamboo fiber polypropylene composites: effect of fiber treatment and nano clay on mechanical and thermal properties. J Vinyl Addit Techn 21:253–258. https://doi.org/10.1002/vnl.21407CrossRef

19.

Pradeep KK, Rakesh K (2011) Reinforcing effect of nanoclay in bamboo-reinforced thermosetting resin composites. Polym Plast Technol 50:127–135. https://doi.org/10.1080/03602559.2010.512350CrossRef

20.

Wang J, Dong J, Zhang J, Zhu B, Cui D (2018) Effects of fiber-surface modification on the properties of bamboo flour/polypropylene composites and their interfacial compatibility. J Polym Eng 38:157–166. https://doi.org/10.1515/polyeng-2016-0432CrossRef

21.

Zuo Y, Chen K, Li P, He X, Li W, Wu Y (2020) Effect of nano-SiO₂ on the compatibility interface and properties of polylactic acid-grafted-bamboo fiber/polylactic acid composite. Int J Biol Macromol 157:177–186. https://doi.org/10.1016/j.ijbiomac.2020.04.205CrossRef

22.

Abeer AS, Rozli Z, Che HA (2020) Tensile properties and microstructure of single-cellulosic bamboo fiber strips after alkali treatment. Fibers 8:26. https://doi.org/10.3390/fib8050026CrossRef

23.

Chen H, Yu Y, Zhong TH, Wu Y, Li YJ, Wu ZH, Fei BH (2017) Effect of alkali treatment on microstructure and mechanical properties of individual bamboo fiber. Cellulose 24:333–347. https://doi.org/10.1007/s10570-016-1116-6CrossRef

24.

Lee SY, Kang IA, Park BS, Doh GH, Park BD (2008) Effects of filler and coupling agent on the properties of bamboo fiber-reinforced polypropylene composites. J Reinf Plast Compos 9:1–17. https://doi.org/10.1177/0731684408094070CrossRef

25.

del Pilar L, Cabrera F, de Lima R, Santana MC, Chamorro CD (2020) Influence of coupling agent in mechanical, physical and thermal properties of polypropylene/bamboo fiber composites: under natural outdoor aging. Polymers 12:929. https://doi.org/10.3390/polym12040929CrossRef

26.

Li YJ, Yin LP, Huang CJ, Meng YJ, Fu F, Wang SQ, Wu Q (2015) Quasi-static and dynamic nanoindentation to determine the influence of thermal treatment on the mechanical properties of bamboo cell walls. Holzforschung 69:909–914. https://doi.org/10.1515/hf-2014-0112CrossRef

27.

Akinyemi AB, Omoniyi ET, Onuzulike G (2020) Effect of microwave assisted alkali pretreatment and other pretreatment methods on some properties of bamboo fibre reinforced cement composites. Constr Build Mater 245:118405. https://doi.org/10.1016/j.conbuildmat.2020.118405CrossRef

28.

Cheng HT, Gao J, Wang G, Shi SQ, Zhang SB, Cai LP (2015) Enhancement of mechanical properties of composites made of calcium carbonate modified bamboo fibers and polypropylene. Holzforschung 69:215–221. https://doi.org/10.1515/hf-2014-0020CrossRef

29.

Ying SJ, Wang CB, Lin Q (2013) Effects of heat treatment on the properties of bamboo fiber/polypropylene composites. Fiber Polym 14:1894–1898. https://doi.org/10.1007/s12221-013-1894-5CrossRef

30.

Inácio André LN, Nonato Renato C, Bonse Baltus C (2017) Recycled PP/EPDM/talc reinforced with bamboo fiber: Assessment of fiber and compatibilizer content on properties using factorial design. Polym Test 61:214–222. https://doi.org/10.1016/j.polymertesting.2017.05.022CrossRef

31.

Abdul Khalil HPS, Bhat IUH, Jawaid M, Zaidon A, Hadi YS (2012) Bamboo fibre reinforced biocomposites: a review. Mater Des 42:353–368. https://doi.org/10.1016/j.matdes.2012.06.015CrossRef

32.

Sun ZY, Wu MM (2019) Effects of sol-gel modification on the interfacial and mechanical properties of sisal fiber reinforced polypropylene composites. Ind crops prod 137:89–97. https://doi.org/10.1016/j.indcrop.2019.05.021CrossRef

33.

Deng JC, Wei X, Zhou HY, Wang G, Zhang SB (2020) Inspiration from table tennis racket: preparation of rubber-wood-bamboo laminated composite (RWBLC) and its response characteristics to cyclic perpendicular compressive load. Compos Struct 241:112135. https://doi.org/10.1016/j.compstruct.2020.112135CrossRef

34.

Nigel C, Paula D, Derya K, Jaipal G, Tony M (2018) Isothermal and non-isothermal crystallization kinetics of composites of poly(propylene) and MWCNTs. Adv Ind Eng Polymer Res 1:99–110. https://doi.org/10.1016/j.aiepr.2018.06.001CrossRef

35.

Sukanya S, Raju VSK (2018) Mechanical, dynamic mechanical and thermal properties of banana fiber/recycled high density polyethylene biocomposites filled with flyash cenospheres. J Polym Environ 1:200. https://doi.org/10.1007/s10924-017-0938-0CrossRef

36.

Zahedi M, Khanjanzadeh H, Pirayesh H, Saadatnia MA (2015) Utilization of natural montmorillonite modified with dimethyl, dehydrogenated tallow quaternary ammonium salt as reinforcement in almond shell flour–polypropylene bio-nanocomposites. Compos Part B-Eng 71:143–151. https://doi.org/10.1016/j.compositesb.2014.11.009CrossRef

37.

Wang ZD, Yang MM, Cheng YH, Liu JY, Xiao B, Chen SY, Huang JL, Xie Q, Wu GL, Wu HJ (2019) Dielectric properties and thermal conductivity of epoxy composites using quantum-sized silver decorated core/shell structured alumina/polydopamine. Compos A 118:302–311. https://doi.org/10.1016/j.compositesa.2018.12.022CrossRef

38.

Pan C, Kou KC, Zhang Y, Li ZY, Wu GL (2018) Enhanced through-plane thermal conductivity of PTFE composites with hybrid fillers of hexagonal boron nitride platelets and aluminum nitride particles. Compos B 153:1–8. https://doi.org/10.1016/j.compositesb.2018.07.019CrossRef

39.

Pan C, Kou KC, Jia Q, Zhang Y, Wu GL, Ji TZ (2017) Improved thermal conductivity and dielectric properties of hBN/PTFE composites via surface treatment by silane coupling agent. Compos B Eng 111:83–90. https://doi.org/10.1016/j.compositesb.2016.11.050CrossRef

40.

Pan C, Zhang JQ, Kou KC, Zhang Y, Wu GL (2018) Investigation of the through-plane thermal conductivity of polymer composites with in-plane oriented hexagonal boron nitride. Int J Heat Mass Tran 120:1–8. https://doi.org/10.1016/j.ijheatmasstransfer.2017.12.015CrossRef

41.

Mishra R, Wiener J, Militky J, Petru M, Tomkova B, Novotna J (2020) Bio-composites reinforced with natural fibers: comparative analysis of thermal, static and dynamic-mechanical properties. Fiber Polym 21:619–627. https://doi.org/10.1007/s12221-020-9804-0CrossRef

42.

Saba N, Jawaid M, Alothman OY, Paridah MT (2016) A review on dynamic mechanical properties of natural fibre reinforced polymer composites. Constr Build Mater 106:149–159. https://doi.org/10.1016/j.conbuildmat.2015.12.075CrossRef

43.

Bassyouni M (2018) Dynamic mechanical properties and characterization of chemically treated sisal fiber-reinforced polypropylene biocomposites. J Reinf Plast Compos 37:1402–1417. https://doi.org/10.1177/0731684418798049CrossRef

44.

Sanjay MR, Jyotishkumar Parameswaranpillai SS, Jawaid M, Pruncu CI, Khan A (2019) A comprehensive review of techniques for natural fibers as reinforcement in composites: preparation. Process Charact Carbohydr Polym 11:108. https://doi.org/10.1016/j.carbpol.2018.11.083CrossRef

45.

Kodgire P, Kalgaonkar R, Hambir S, Bulakh N (2010) PP/Clay nanocomposites: effect of clay treatment on morphology and dynamic mechanical properties. J Appl Polym Sci 81:1786–1792. https://doi.org/10.1002/app.1611CrossRef

46.

Karaduman Y, Sayeed MMA, Onal L, Rawal A (2014) Viscoelastic properties of surface modified jute fiber/polypropylene nonwoven composite. Compos Part B-Eng 67:111–118. https://doi.org/10.1016/j.compositesb.2014.06.019CrossRef

47.

Etaati A, Pather S, Fang Z, Wang H (2014) The study of fibre/matrix bond strength in short hemp polypropylene composites from dynamic mechanical analysis. Compos Part B-Eng 62:19–28. https://doi.org/10.1016/j.compositesb.2014.02.011CrossRef

48.

Nayak SK, Mohanty S, Samal SK (2009) Influence of short bamboo/glass fiber on the thermal, dynamic mechanical and rheological properties of polypropylene hybrid composites. Mat Sci Eng A-Struct 523:32–38. https://doi.org/10.1016/j.msea.2009.06.020CrossRef

49.

Doan T-T-L, Brodowsky H, Mäder E (2007) Jute fibre/polypropylene composites II. Thermal, hydrothermal and dynamic mechanical behaviour. Compos Sci Technol 67:2707–2714. https://doi.org/10.1016/j.compscitech.2007.02.011CrossRef

50.

Zahedi M, Pirayesh H, Khanjanzadeh H, Tabar MM (2013) Organo-modified montmorillonite reinforced walnut shell/polypropylene composites. Mater Design 51:803–809. https://doi.org/10.1016/j.matdes.2013.05.007CrossRef

51.

Ibrahim ID, Jamiru T, Sadiku RE, Kupolati WK, Agwuncha SC (2016) Dependency of the mechanical properties of sisal fiber reinforced recycled polypropylene composites on fiber surface treatment. Fiber Content Nanoclay J Polym Environ 25:427–434. https://doi.org/10.1007/s10924-016-0823-2CrossRef

Titel: Mechanical, dynamic mechanical and thermal properties of TiO2 nanoparticles treatment bamboo fiber-reinforced polypropylene composites
verfasst von: Juan Guo
Mengdan Cao
Wenting Ren
Hankun Wang
Yan Yu
Publikationsdatum: 03.05.2021
Verlag: Springer US
Erschienen in: Journal of Materials Science / Ausgabe 22/2021
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-021-06100-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Graphical abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 22/2021

Enhancing the mechanical–electrical property simultaneously in pure copper composites by using carbonized polymer dots

Electro-optical properties and frequency response of polymer-dispersed liquid crystal gratings doped with multi-walled carbon nanotubes

Investigation of the functional network modifier loading on the stoichiometric ratio of epoxy resins and their dielectric properties

Investigation of phase evolution within ZnO–Bi2O3 varistors utilizing thin film prototypes

Effect of Gd content on the discharge and electrochemical behaviors of the magnesium alloy AZ31 as an anode for Mg-air battery

Large-scale electrochemical fabrication of nitrogen-doped carbon quantum dots and their application as corrosion inhibitor for copper

Premium Partner

Marktübersichten