Ausgabe 5/2009
Inhalt (29 Artikel)
Remaining Creep Life Assessment Techniques Based on Creep Cavitation Modeling
Kumar Ankit
Preannealing, Annealing Atmosphere, and Surface-Energy-Induced Selective Growth in 0.1 Pct Mn–Added 3 Pct Si-Fe Alloy Containing 95 ppm Sulfur
Y. C. Jung, J. K. Lee, K. T. Kim, N. H. Heo
Model of {110}〈001〉 Texture Formation in Shear Bands during Cold Rolling of Fe-3 Pct Si Alloy
G. M. Rusakov, M. L. Lobanov, A. A. Redikultsev, I. V. Kagan
Mechanical Responses of Superlight β-Based Mg-Li-Al-Zn Wrought Alloys under Resonance
Jenn-Ming Song, Yi-Hua Lin, Chien-Wei Su, Jian-Yih Wang
Microstructural Evolution of Hypoeutectic, Near-Eutectic, and Hypereutectic High-Carbon Cr-Based Hard-Facing Alloys
Chi-Ming Lin, Chia-Ming Chang, Jie-Hao Chen, Chih-Chun Hsieh, Weite Wu
Load Partitioning and Strain-Induced Martensite Formation during Tensile Loading of a Metastable Austenitic Stainless Steel
P. Hedström, L. E. Lindgren, J. Almer, U. Lienert, J. Bernier, M. Terner, M. Odén
Theoretical Research on Phase Transformations in Metastable β-Titanium Alloys
Cheng Lin, Zhilin Liu, Yongqing Zhao
Martensite Formation in Partially and Fully Austenitic Plain Carbon Steels
S.M.C. Van Bohemen, J. Sietsma
Mechanical Properties of DU-xMo Alloys with x = 7 to 12 Weight Percent
Douglas E. Burkes, Ramprashad Prabhakaran, Jan-Fong Jue, Francine J. Rice
Effects of Alloying Elements on Sticking Behavior Occurring during Hot Rolling of Modified Ferritic STS430J1L Stainless Steels
Dae Jin Ha, Yong Jin Kim, Jong Seog Lee, Yong Deuk Lee, Sunghak Lee
Fatigue Life Prediction for Porosity-Containing Cast 319-T7 Aluminum Alloy
Younghwan Jang, Youin Jeong, Chongho Yoon, Sangshik Kim
Analysis of the Parameters Influencing the Quench-Aging Behavior of Ultra-Low-Carbon Steels
V. Massardier, J. Merlin
Correlation of Microstructure with Hardness, Wear Resistance, and Corrosion Resistance of Powder-Injection-Molded Specimens of Fe-Alloy Powders
Chang-Young Son, Tae Shik Yoon, Sunghak Lee
Using Thermomechanical Conditioning Cycles to Improve Fracture Toughness of Low Carbon Steel
F. W. Wu, R. N. Ibrahim, R. K. Singh Raman, R. Das
Surface Structure Evolution and Abnormal Wear Behavior of the TiNiNb Alloy under Impact Load
Jianjun Zhang, Jinhua Zhu
Effect of Structural Defects, Surface Irregularities, and Quenched-In Defects on Corrosion of Zr-Based Metallic Glasses
B. Vishwanadh, Geogy J. Abraham, Jagannath, S. Neogy, R. S. Dutta, G. K. Dey
Evaluation of Formability and Mechanical Behavior of Laser-Welded Tailored Blanks Made of Interstitial-Free and Dual-Phase Steels
Sujit Chatterjee, Rajib Saha, M. Shome, R. K. Ray
Optimization of Galvannealing Parameters through Numerical Modeling of Galvannealing Process
A. K. Verma, Sanjay Chandra, N. Bandyopadhyay, B. K. Dhindaw, R. D. K. Misra
Dynamic Recrystallization of Austenite in Ni-30 Pct Fe Model Alloy: Microstructure and Texture Evolution
Hossein Beladi, Pavel Cizek, Peter D. Hodgson
A Study of Microstructures and Tensile Properties of Two Fe-Mn-Al-Si-C Alloys
B. Bhattacharya, A.S. Sharma, S.S. Hazra, R.K. Ray
Correcting the Stress-Strain Curve in the Stroke-Rate Controlling Forging Process
Y. P. Li, H. Matsumoto, A. Chiba
Transformation Textures in Steels: A Simulation Based on Micromechanical Modeling Data
A. Roatta, A.L. Fourty, R.E. Bolmaro
Low-Temperature Sensitization Behavior of Base, Heat-Affected Zone, and Weld Pool in AISI 304LN
Raghuvir Singh, Gautam Das, P.K. Singh, I. Chattoraj
Processing and Behavior of Fe-Based Metallic Glass Components via Laser-Engineered Net Shaping
B. Zheng, Y. Zhou, J. E. Smugeresky, E. J. Lavernia
Effect of Squeeze Pressure on Aging and Mechanical Properties of AA2218-5 Wt Pct Al2O3 (TiO2) Composites
Vineet Tirth, S. Ray, M. L. Kapoor
Correcting the Stress-Strain Curve in Hot Compression Process to High Strain Level
Y. P. Li, E. Onodera, H. Matsumoto, A. Chiba