nach oben

Journal of Materials Engineering and Performance

Erschienen in:

12.11.2021

Microstructural and Corrosion Resistance Evaluation of Hot-Dipped Al-Zn-Si Alloy-Coated Steel

verfasst von: Debabrata Pradhan, Avik Mondal, Anindita Chakraborty

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 3/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The article describes a novel Al-Zn-Si alloy hot-dip coating on steel, coating characterization and performance evaluation. Cross-sectional SEM micrographs showed that the coating consists of two layers- thick Al-Zn-Si alloy layer on the top and a thin Al-Fe-Si intermetallic layer underneath toward the interface. The outer Al-Zn-Si alloy layer is composed of primary aluminum-rich (α-Al) dendrites along with uniform distribution of Si. EDS and XRD analysis identified Al-Fe-Si intermetallic layer as Al₈Fe₂Si phase. Potentiodynamic polarization study displayed superior corrosion properties of the coating compared to commercial aluminized steels. Corrosion rate (in mpy) was found to be six times lower compared to galvanized coating with a similar corrosion potential. Furthermore, salt spray test life of coating more than 2000h confirmed superior corrosion properties than GI coating.

Vorheriger Artikel Study on the Variation in Mechanical Properties along the Dissimilar Weldments of P22 and P91 Steel

Nächster Artikel Characterization of Tool Wear Mechanisms and Failure Modes of TiAlN-NbN Coated Carbide Inserts in Face Milling of Inconel 718

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

X.G. Zhang, Galvanic Corrosion of Zinc and its Alloys, J. Electrochem. Soc., 1996, 143, p 1472–1484. CrossRef

X.G. Zhang and E.M. Valeriote, Galvanic Protection of Steel and Galvanic Corrosion of Zinc Under Thin Layer Electrolytes, Corros. Sci., 1993, 34, p 1957–1972. CrossRef

J.H.O.J. Wijjenberg, J.T. Stevels and J.H.W. de Wit, Galvanic Coupling of Zinc to Steel in Alkaline Solutions, Electrochim. Acta, 1997, 43, p 649–657. CrossRef

X.G. Zhang, Corrosion and Electrochemistry of Zinc, Plenum Press, New York/London, 1996.CrossRef

A.P. Yadav, H. Katayama, K. Noda, H. Masuda, A. Nishikata and T. Tsuru, Surface Potential Distribution Over a Zinc/Steel Galvanic Couple Corroding Under Thin Layer of Electrolyte, Electrochim. Acta, 2007, 52, p 3121–3129. CrossRef

M. Mouanga, M. Puiggalia, B. Tribollet, V. Vivierb, N. Pébèrec and O. Devos, Galvanic Corrosion Between Zinc and Carbon Steel Investigated by Local Electrochemical Impedance Spectroscopy, Electrochim. Acta, 2013, 88, p 6–14. CrossRef

R.W. Richards, R.D. Jones, P.D. Clements and H. Clarke, Metallurgy of Continuous Hot Dip Aluminizing, Int. Mater. Rev., 1994, 39, p 191–212. CrossRef

A. Bahadur and O.N. Mohanty, Structural Studies of Hot Dip Aluminized Coatings on Mild Steel, Mater. Trans. JIM, 1991, 32, p 1053–1061. CrossRef

C.J. Wang and S.M. Chen, The High-Temperature Oxidation Behavior of Hot-Dipping Al–Si Coating on Low Carbon Steel, Surf. Coat. Technol., 2006, 200, p 6601–6605. CrossRef

10.

C.J. Wang and M. Badaruddin, The Dependence of High Temperature Resistance of Aluminized Steel Exposed to Water-Vapour Oxidation, Surf. Coat. Technol., 2010, 205, p 1200–1205. CrossRef

11.

W. Warnecke, J. Froeber and R. Bode, Hot Dip Aluminized Steel Sheet - an Excellent Material for Fuel Tank Application, SAE Tech., 1999 https://doi.org/10.4271/1999-01-0022CrossRef

12.

D.W. Fan and B.C. De Cooman, Formation of an Aluminide Coating on hot Stamped Steel, ISIJ Int., 2010, 50, p 1713–1718. CrossRef

13.

C. Allély, L. Dosdat, O. Clauzeau, K. Ogle and P. Volovitch, Anticorrosion Mechanisms of Aluminized Steel for Hot Stamping, Surf. Coat. Technol., 2014, 238, p 188–196. CrossRef

14.

C. Kim, S. Cho, W. Yang, A.I. Karayan and H. Castaneda, Corrosion Behavior of Al-Si-Mg Coated Hot-Press-Forming Steel, Corros. Sci., 2021, 183, 109339. https://doi.org/10.1016/j.corsci.2021.109339CrossRef

15.

Y. Kyo, A.P. Yadav, A. Nishikata and T. Tsuru, Hydrogen Entry Behaviour of Newly Developed Al–Mg–Si Coating Produced by Physical Vapour Deposition, Corros. Sci., 2011, 53, p 3043–3047. CrossRef

16.

C. Kruehong, G.A. EL-Mahdy, A. Nishikata and T. Tsuru, Influence of Second Phases on the Electrochemical Behavior of Hot Dipped Al–Mg–Si Coated Steel, Corros. Sci., 2010, 52, p 2379–2386. CrossRef

17.

T. Tsuru, Hot-Dipped Al-Mg-Si Coating Steel-its Structure, Electrochemical and Mechanical Properties, Corros. Sci. Technol., 2010, 9, p 233–238.

18.

S. Yamaguchi, J. Maki, M. Kurosaki and T. Izaki, Composition and Corrosion Behavior of Hot-Dip Al-Si-Mg Alloy Coated Steel Sheets, Tetsu-to-Hagane, 2013, 99, p 617–624. CrossRef

19.

N. Takata, M. Nishimoto, S. Kobayashi and M. Takeyama, Morphology and Formation of Fe–Al Intermetallic Layers on Iron Hot-Dipped in Al–Mg–Si Alloy Melt, Intermetallics, 2014, 54, p 136–142. CrossRef

20.

C. Kruehong and G. A. EL-Mahdy, A. Nishikata, T. Tsuru, , Influence of Second Phases on the Electrochemical Behavior of Hot Dipped Al–Mg–Si Coated Steel, Corros. Sci., 2010, 52, p 2379–2386. CrossRef

21.

P.P. Dey, P. Modak, P.S. Banerjee, D. Chakrabarti, A.H. Seikh, H.S. Abdo, M. Luqman and M. Ghosh, Studies on the Characterization and Morphological Features of the Coating on Interstitial Free Steel Dipped in Molten Al-Si-Mg Alloy at 800°C, J. Mater. Res. Technol., 2020, 9, p 4788–4805. CrossRef

22.

D. Pradhan, M. Manna and M. Dutta, Al–Mg–Mn Alloy Coating on Steel with Superior Corrosion Behavior, Surf. Coat. Technol., 2014, 258, p 405–414. CrossRef

23.

D. Pradhan, A. Mondal, A. Chakraborty, M. Manna and M. Dutta, Microstructural Investigation and Corrosion Behavior of Hot-Dipped Al-Si-Mg-Cu Alloy Coated Steel, Surf. Coat. Technol., 2019, 375, p 427–441. CrossRef

24.

A.R. Moreira, Z. Panossian, P.L. Camargo, M.F. Moreira and ICd Silva, JER deCarvalho, , Zn/55Al Coating Microstructure and Corrosion Mechanism, Corros. Sci., 2006, 48, p 564–576. CrossRef

25.

R. Chen and D. Willis, The Behavior of Silicon in the Solidification of Zn–55Al–16Si Coating on Steel, Metall. Mater. Trans. A, 2005, 36, p 117–128. CrossRef

26.

R. Mathew, P.R. Stoddart, D. Nolan and Y. Durandet, Microstructural Refinement of Aluminium-Zinc-Silicon Coated Steels, Surf. Coat. Technol., 2016, 306, p 490–496. CrossRef

27.

W. Liua, Q. Lia and M.-C. Li, Corrosion Behaviour of Hot-Dip Al–Zn–Si and Al–Zn–Si–3Mg Coatingsin NaCl Solution, Corros. Sci., 2017, 121, p 72–83. CrossRef

28.

W.J. Cheng and C.J. Wang, Growth of Intermetallic Layer in the Aluminide Mild Steel During Hot-Dipping, Surf. Coat. Technol., 2009, 204, p 824–828. CrossRef

29.

G. Eggeler, W. Auer and H. Kaesche, On the Influence of Silicon on the Growth of the Alloy Layer During Hot Dip Aluminizing, J. Mater. Sci., 1986, 21, p 3348–3350. CrossRef

30.

M.A. Shady, A.R. El-Sissi and A.M. Attia, On the Technological Properties of Steel Strips Aluminized in Al-Si Baths, J. Mater. Sci. Lett., 1996, 15, p 1032–1036. CrossRef

31.

B. Lemmens, H. Springer, I. De Graeve, J. De Strycker, D. Raabe and K. Verbeken, Phases Formed During Hot-Dip Aluminizing of Ferritic Steel, Surf. Coat. Technol., 2017, 319, p 104–109. CrossRef

32.

M.V. Akdeniz, A.O. Mekhrabov and T. Yilmaz, The Role of Si Addition on the Interfacial Interaction in Fe-Al Diffusion Layer, Scr. Mater., 1994, 31, p 1723–1728. CrossRef

33.

H. Azimaee, M. Sarfaraz, M. Mirjalili and K. Aminian, Effect of Silicon and Manganese on the Kinetics and Morphology of the Intermetallic Layer Growth During Hot-Dip Aluminizing, Surf Coat. Technol., 2019, 357, p 483–496. CrossRef

34.

H. Springer, A. Kostka, E.J. Payton, D. Raabe, A. Kaysser-Pyzalla and G. Eggeler, On the Formation and Growth of Intermetallic Phases During Interdiffusion Between Low-Carbon Steel and Aluminum Alloys, Acta Mater., 2011, 59, p 1586–1600. CrossRef

35.

M. Windmann, A. Röttger and W. Theisen, Formation of Intermetallic Phases in Al-Coated Hot-Stamped 22MnB5 Sheets in Terms of Coating Thickness and Si Content, Surf. Coat. Technol., 2014, 246, p 17–25. CrossRef

36.

M. Windmann, A. Röttger and W. Theisen, Phase Formation at the Interface Between a Boron Alloyed Steel Substrate and an Al-rich Coating, Surf. Coat. Technol., 2013, 226, p 130–139. CrossRef

37.

N. Takata, M. Nishimoto, S. Kobayashi and M. Takeyama, Growth of Fe₂Al₅ Phase on Pure Iron Hot-Dipped in Al–Mg–Si Alloy Melt with Fe in Solution, ISIJ Int., 2015, 55, p 1454–1459. CrossRef

38.

F. Yin, M. Zhao, Y. Liu, W. Han and Z. Li, Effect of Si on Growth Kinetics of Intermetallic Compounds During Reaction Between Solid Iron and Molten Aluminum, Trans. Nonferrous Met. Soc. China, 2013, 23, p 556–561. CrossRef

39.

S.G. Shabestari and K.A. Nazari, Growth Kinetics of Aluminum-Bearing Intermetallic Layer on Tool Steel, Int. J. Mater. Res. (formerly Z. Metallkd.), 2013, 104, p 351–357. CrossRef

40.

I. De Graeve, I. Schoukens, A. Lanzutti, F. Andreatta, A. Alvarez-Pampliega, J. De Strycker, L. Fedrizzi and H. Terryn, Mechanism of Corrosion Protection of Hot-Dip Aluminium–Silicon Coatings on Steel Studied by Electrochemical Depth Profiling, Corros. Sci., 2013, 76, p 325–336. CrossRef

41.

Y. Li, Corrosion Behaviour of Hot Dip Zinc And Zinc–Aluminium Coatings on Steel in Seawater, Bull. Mater. Sci., 2001, 24, p 355–360. CrossRef

42.

P. Choudhury and S. Das, Effect of Microstructure on the Corrosion Behavior of a Zinc–Aluminium Alloy, J. Mater. Sci., 2005, 40, p 805–807. CrossRef

43.

H.-S. Lee, J.K. Singh, M.A. Ismail, C. Bhattacharya, A.H. Seikh, N. Alharthi and R.R. Hussain, Corrosion Mechanism and Kinetics of Al-Zn Coating Deposited by Arc Thermal Spraying Process in Saline Solution at Prolong Exposure Periods, Sci. Rep., 2019, 9, p 3399. https://doi.org/10.1038/s41598-019-39943-3CrossRef

44.

H.N. McMurray, Localized Corrosion Behavior in Aluminum-Zinc Alloy Coatings Investigated Using the Scanning Reference Electrode Technique, Corros., 2001, 57, p 313–322. CrossRef

45.

D.J. Blickwede, 55% Al-Zn-Alloy-Coated Sheet Steel, Tetsu-to-Hagane, 1980, 66, p 821–834. CrossRef

Titel: Microstructural and Corrosion Resistance Evaluation of Hot-Dipped Al-Zn-Si Alloy-Coated Steel
verfasst von: Debabrata Pradhan
Avik Mondal
Anindita Chakraborty
Publikationsdatum: 12.11.2021
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 3/2022
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-021-06316-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2022

Precipitation Behavior and Strengthening Mechanism of Extruded 2196 Al-Cu-Li Alloy Plate during Multi-Step Age-Hardening Treatment

Effect of Tool-Workpiece Relative Position on Microstructure and Mechanical Properties of Al-Cu Dissimilar Friction Stir Weld

The Effects of Chemical Vapor Aluminizing Process Time and Post-processing for Nickel Aluminide Coating on CMSX-4 Alloy

Applicability of Hill48 Yield Model and Effect of Anisotropic Parameter Determination Methods on Anisotropic Prediction

Editorial

Improvement in Wear Resistance Performance of CuAl8Fe3 Single-Phase Aluminum Bronze via Slide Diamond Burnishing

Premium Partner

Marktübersichten