nach oben

Lasers in Manufacturing and Materials Processing

Erschienen in:

14.10.2023 | Research

Microstructure and Properties of the Stellite6/WC Composite Coatings Prepared by Laser Cladding

verfasst von: Haoqiang Zhang, Hao Liu, Chengxiang Ren, Zhifeng Li, Suoxia Hou

Erschienen in: Lasers in Manufacturing and Materials Processing | Ausgabe 4/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

To improve the microhardness and wear resistance of Q235 steel, Stellite6/WC composite coatings were prepared on the surface of Q235 steel by laser cladding mixed powder (Stellite6, WC, W, and C powder) on its surface. The microstructure and mechanical properties of directly added WC and in situ synthesized WC were analyzed and compared by scanning electron microscope(SEM), X-ray diffractometer(XRD), microhardness tester, and friction and wear testing machine. The results showed that the main phases of the composite coatings were the γ-Co, Cr₇C₃, CoCx, WC, and W₂C. The change of microhardness in the middle and lower parts of the composite coatings prepared by in-situ synthesized WC was smaller than that of the directly added WC. The best wear resistance was obtained for the composite coating with 12 wt% WC direct addition, which was slightly better than the composite coating with 3 wt% W in-situ. This is because when the amount of W was more than 6 wt%, some W particles could not be completely synthesized in situ in the friction test, and are easy to fall off, and the wear resistance of the cladding layer decreased sharply.

Vorheriger Artikel Pulsed Laser Grooving of Silicon Under Different Ambient Media

Nächster Artikel Application of Hybrid Laser Arc Welding for Construction of LNG Tanks Made of Thick Cryogenic 9% Ni Steel Plates

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Karmakar, D.P., Muvvala, G., Nath, A.K.: High-temperature abrasive wear characteristics of H13 steel modified by laser remelting and cladded with stellite 6 and stellite 6/30% WC. Surf. Coat. Technol. 422, 127498 (2021). https://doi.org/10.1016/j.surfcoat.2021.127498CrossRef

Li, W., Xu, P.Q., Wang, Y.Y., Zou, Y., Gong, H.Y., Lu, F.G.: Laser synthesis and microstructure of micro- and nano-structured WC reinforced co-based cladding layers on titanium alloy. J. Alloys Compd. 749, 10–22 (2018). https://doi.org/10.1016/j.jallcom.2018.03.235CrossRef

Han, T., Xiao, M., Zhang, Y., Shen, Y.: Effect of cr content on microstructure and properties of Ni-Ti-xCr coatings by laser cladding. Optik. 179, 1042–1048 (2019). https://doi.org/10.1016/j.ijleo.2018.11.044CrossRef

Wang, G.Y., Zhang, J.Z., Shu, R.Y., Yang, S.: High temperature wear resistance and thermal fatigue behavior of Stellite-6/WC coatings produced by laser cladding with co-coated WC powder. Int. J. Refract. Met. Hard Mater. 81, 63–70 (2019). https://doi.org/10.1016/j.ijrmhm.2019.02.024CrossRef

Weng, F., Yu, H.J., Liu, J.L., Chen, C.Z., Dai, J.J., Zhao, Z.H.: Microstructure and wear property of the Ti₅Si₃/TiC reinforced co-based coatings fabricated by laser cladding on Ti-6Al-4V. Opt. Laser Technol. 92, 156–162 (2017). https://doi.org/10.1016/j.optlastec.2017.01.014CrossRef

Hu, M., Tang, J.C., Chen, X.G., Ye, N., Zhao, X.Y., Xu, M.M.: Microstructure and properties of WC-12Co composite coatings prepared by laser cladding. Trans. Nonferrous Met. Soc. China. 30(4), 1017–1030 (2020). https://doi.org/10.1016/s1003-6326(20)65273-6CrossRef

Li, X., Zhang, C.H., Zhang, S., Wu, C.L., Liu, Y., Zhang, J.B., Babar Shahzad, M.: Manufacturing of Ti₃SiC₂ lubricated co-based alloy coatings using laser cladding technology. Opt. Laser Technol. 114, 209–215 (2019). https://doi.org/10.1016/j.optlastec.2019.02.001CrossRef

Bartkowski, D., Kinal, G.: Microstructure and wear resistance of Stellite-6/WC MMC coatings produced by laser cladding using yb:YAG disk laser. Int. J. Refract. Met. Hard Mater. 58, 157–164 (2016). https://doi.org/10.1016/j.ijrmhm.2016.04.017CrossRef

Chen, L., Chen, W.G., Li, D.Y., Jing, P.Y., Yin, H.Z., Wu, H.J., Xie, Y., Wang, X.N.: Effect of nano-La₂O₃ doping on the tribological behavior of laser cladded WC-12Co coating on 65Mn steel under water lubrication condition. Tribol. Int. 169, 107428 (2022). https://doi.org/10.1016/j.triboint.2022.107428CrossRef

10.

Ezquerra, B.L., Lozada, L., van den Berg, H., Wolf, M., Sánchez, J.M.: Comparison of the thermal shock resistance of WC based cemented carbides with Co and Co-Ni-Cr based binders. Int. J. Refract. Met. Hard Mater. 72, 89–96 (2018). https://doi.org/10.1016/j.ijrmhm.2017.12.021CrossRef

11.

Bartkowski, D., Młynarczak, A., Piasecki, A., Dudziak, B., Gościański, M., Bartkowska, A.: Microstructure, microhardness and corrosion resistance of Stellite-6 coatings reinforced with WC particles using laser cladding. Opt. Laser Technol. 68, 191–201 (2015). https://doi.org/10.1016/j.optlastec.2014.12.005CrossRef

12.

Xu, G.J., Kutsuna, M.: Cladding with stellite 6 + WC using a YAG laser robot system. Surf. Eng. 22(5), 345–352 (2013). https://doi.org/10.1179/174329406X98430CrossRef

13.

Quan, X.M., Ding, L.: Microstructure and property of In-Situ TiC Reinforced Co-Based Composite Coatings by Laser Cladding. Sci. Adv. Mater. 11(12), 1798–1805 (2019). https://doi.org/10.1166/sam.2019.3610CrossRef

14.

Shu, D., Li, Z.G., Zhang, K., Yao, C., Li, D., Dai, Z.: In-situ synthesized high volume fraction WC reinforced Ni-based coating by laser cladding. Mater. Lett. 195, 178–181 (2017). https://doi.org/10.1016/j.matlet.2017.02.076CrossRef

15.

Wu, P., Du, H.M., Chen, X.L., Li, Z.Q., Bai, H.L., Jiang, E.Y.: Influence of WC particle behavior on the wear resistance properties of Ni–WC composite coatings. Wear. 257(1–2), 142–147 (2004). https://doi.org/10.1016/j.wear.2003.10.019CrossRef

16.

Tian, Z.H., Zhao, Y.T., Jiang, Y.J., Ren, H.P.: Microstructure and properties of Inconel 625 + WC composite coatings prepared by laser cladding. Rare Met. 40(8), 2281–2291 (2020). https://doi.org/10.1007/s12598-020-01507-0CrossRef

17.

Zhou, S.W., Xu, T.Y., Hu, C., Wu, H., Liu, H.L., Ma, X.Q.: A comparative study of tungsten carbide and carbon nanotubes reinforced Inconel 625 composite coatings fabricated by laser cladding. Opt. Laser Technol. 140, 106967 (2021). https://doi.org/10.1016/j.optlastec.2021.106967CrossRef

18.

Li, W.Y., Yang, X.F., Xiao, J.P., Hou, Q.M.: Effect of WC mass fraction on the microstructure and friction properties of WC/Ni60 laser cladding layer of brake discs. Ceram. Int. 47(20), 28754–28763 (2021). https://doi.org/10.1016/j.ceramint.2021.07.035CrossRef

19.

Ortiz, A., García, A., Cadenas, M., Fernández, M.R., Cuetos, J.M.: WC particles distribution model in the cross-section of laser cladded NiCrBSi + WC coatings, for different wt% WC. Surf. Coat. Technol. 324, 298–306 (2017). https://doi.org/10.1016/j.surfcoat.2017.05.086CrossRef

20.

Liu, J.D., Sun, W.L., Huang, Y.: Effect of carbon nanotubes content on microstructure and properties of WC/Ni laser cladding coatings. Surf. Eng. 37(5), 650–657 (2020). https://doi.org/10.1080/02670844.2020.1812481CrossRef

21.

Zhou, S.F., Xu, Y.B., Liao, B.Q., Sun, Y.J., Dai, X.Q., Yang, J.X., Li, Z.Y.: Effect of laser remelting on microstructure and properties of WC reinforced Fe-based amorphous composite coatings by laser cladding. Opt. Laser Technol. 103, 8–16 (2018). https://doi.org/10.1016/j.optlastec.2018.01.024CrossRef

22.

Dai, Q.L., Luo, C.B., You, F.Y.: Crack Restraining Methods and their Effects on the Microstructures and Properties of Laser Cladded WC/Fe Coatings. Materials. 11(12) (2018). https://doi.org/10.3390/ma11122541

23.

Li, Q.T., Lei, Y.P., Fu, H.G.: Laser cladding in-situ NbC particle reinforced Fe-based composite coatings with rare earth oxide addition. Surf. Coat. Technol. 239, 102–107 (2014). https://doi.org/10.1016/j.surfcoat.2013.11.026CrossRef

24.

Zhang, M.M., Liu, B., Bai, P.K.: Microstructure and properties of laser cladding of 316L stainless steel on hydraulic support tube. J. Meas. Sci. Instrum. 8(2), 154–161 (2017). https://doi.org/10.3969/j.issn.1674-8042-2017-02-007CrossRef

25.

Ren, M.F., Li, R.F., Zhang, X.Q., Gu, J.Y., Jiao, C.: Effect of WC particles preparation method on microstructure and properties of laser cladded Ni60-WC coatings. J. Mater. Res. Technol. 22, 605–616 (2023). https://doi.org/10.1016/j.jmrt.2022.11.120CrossRef

26.

Xia, Y.L., Chen, H.N., Liang, X.D., Lei, J.B.: Circular oscillating laser melting deposition of nickel-based superalloy reinforced by WC: Microstructure, wear resistance and electrochemical properties. J. Manuf. Process. 68, 1694–1704 (2021). https://doi.org/10.1016/j.jmapro.2021.06.074CrossRef

27.

Farahmand, P., Liu, S., Zhang, Z., Kovacevic, R.: Laser cladding assisted by induction heating of Ni–WC composite enhanced by nano-WC and La2O3. Ceram. Int. 40(10), 15421–15438 (2014). https://doi.org/10.1016/j.ceramint.2014.06.097CrossRef

28.

Siddiqui, A.A., Dubey, A.K.: Recent trends in laser cladding and surface alloying. Opt. Laser Technol. (2021). 134https://doi.org/10.1016/j.optlastec.2020.106619CrossRef

29.

Ma, Q.S., Li, Y.J., Wang, J., Liu, K.: Homogenization of Carbides in Ni60/WC Composite Coatings made by Fiber laser remelting. Mater. Manuf. Processes. 30(12), 1417–1424 (2015). https://doi.org/10.1080/10426914.2015.1026353CrossRef

30.

Ferozhkhan, M.M., Kumar, K.G., Ravibharath, R.: Metallurgical study of stellite 6 cladding on 309-16L Stainless Steel. Arab. J. Sci. Eng. 42(5), 2067–2074 (2017). https://doi.org/10.1007/s13369-017-2457-7CrossRef

31.

Wang, C.Y., Luo, K.Y., Bu, X.Y., Su, Y.Y., Cai, J., Zhang, Q.L., Lu, J.Z.: Laser shock peening-induced surface gradient stress distribution and extension mechanism in corrosion fatigue life of AISI 420 stainless steel. Corros. Sci. 177 (2020). https://doi.org/10.1016/j.corsci.2020.109027

32.

Yong, Y.W., Fu, W., Zhang, X., Deng, Q.L., Yang, J.G.: In-situ synthesis of WC/TaC Reinforced Nickel-Based Composite Alloy Coating by Laser Cladding. Rare Metal Materials and Engineering. 46(11), 3176–3181 (2017)CrossRef

33.

Shen, X.H., Peng, H., Xue, Y.N., Wang, B.L., Su, G.S., Zhu, J., Li, A.H.: Microstructure and Properties of WC/Ni-Based laser-clad Coatings with different WC content values. Materials. 15(18) (2022). https://doi.org/10.3390/ma15186309

34.

Wu, Q.L., Li, W.G., Zhong, N., Gang, W., Haishan, W.: Microstructure and wear behavior of laser cladding VC–Cr₇C₃ ceramic coating on steel substrate. Mater. Design. 49, 10–18 (2013). https://doi.org/10.1016/j.matdes.2013.01.067CrossRef

35.

Li, Z.Y., Yan, H., Zhang, P.L., Guo, J.L., Yu, Z.S., Ringsberg, J.W.: Improving surface resistance to wear and corrosion of nickel–aluminum bronze by laser-clad TaC/Co-based alloy composite coatings. Surf. Coat. Technol. 405, 126592 (2021). https://doi.org/10.1016/j.surfcoat.2020.126592CrossRef

36.

Xu, P.H., Zhu, L.D., Xue, P.S., Yang, Z.C., Wang, S.H., Ning, J.S., Meng, G.R., Lan, Q., Qin, S.Q.: Microstructure and properties of IN718/WC-12Co composite coating by laser cladding. Ceram. Int. 48(7), 9218–9228 (2022). https://doi.org/10.1016/j.ceramint.2021.12.108CrossRef

37.

Cao, Q.Z., Fan, L., Chen, H.Y., Hou, Y., Dong, L.H., Ni, Z.W.: Wear behavior of laser cladded WC-reinforced Ni-based coatings under low temperature. Tribol. Int. 176, 107939 (2022). https://doi.org/10.1016/j.triboint.2022.107939CrossRef

38.

Raahgini, C., Verdi, D.: Abrasive wear performance of laser cladded Inconel 625 based metal matrix composites: Effect of the vanadium carbide reinforcement phase content. Surf. Coat. Technol. 429, 127975 (2022). https://doi.org/10.1016/j.surfcoat.2021.127975CrossRef

Titel: Microstructure and Properties of the Stellite6/WC Composite Coatings Prepared by Laser Cladding
verfasst von: Haoqiang Zhang
Hao Liu
Chengxiang Ren
Zhifeng Li
Suoxia Hou
Publikationsdatum: 14.10.2023
Verlag: Springer US
Erschienen in: Lasers in Manufacturing and Materials Processing / Ausgabe 4/2023
Print ISSN: 2196-7229
Elektronische ISSN: 2196-7237
DOI: https://doi.org/10.1007/s40516-023-00228-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2023

Application of Hybrid Laser Arc Welding for Construction of LNG Tanks Made of Thick Cryogenic 9% Ni Steel Plates

Developing Laser-Assisted Machining Process for Nickel Based Superalloy IN625 Using Experimental and Statistical Analysis

Experimental Investigation of AISI 304 Plates Deformation Through Laser Trepanning Process

Pulsed Laser Grooving of Silicon Under Different Ambient Media

Laser Beam Polishing of PA12 Parts Manufactured by Powder Bed Fusion

Laser-Based Additive Manufacturing and Mechanical Surface Post-Processing: Comparison of Barrel Finishing, Shot and Ultrasonic Peening for Corrosion Resistance Improvement of Superalloy

Premium Partner

Marktübersichten