nach oben

Journal of Materials Engineering and Performance

Erschienen in:

18.07.2022 | Technical Article

New Impact Resistance Bionic Composite Coating Inspired by Turtle Shell

verfasst von: Zheng-yang Li, Zhen-bing Cai, Teng Zhou, Xue-jun Cui, Min-hao Zhu

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 1/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The turtle has survived for over several hundred million years and evolved excellent shell structure to resist high-stress repeated impact by stone and predators. Based on the impact resistance performance of turtle shell, a new bionic composite coating (BCC) was proposed and prepared, which is composed of porous micro-arc oxidation (MAO) inner layer, Si transition middle layer, and different-element (H, Si, and Cr)-doped diamond-like carbon (DLC) outer layer. This study aims to investigate the impact response, energy absorption, and damage characteristics of BCC in low-speed impact conditions. Results indicate that the impact behavior of BCC is superior to substrate and the BCC presents a lower peak force and higher energy absorption. Thus, the outer DLC layer could resist the impact force to reduce damage. The porous structure in MAO layer could act as a buffer and deform to absorb energy. The BCC-Si shows the best impact resistance with the lowest wear volume due to the Si-DLC layer with a good balance of toughness and hardness.

Vorheriger Artikel An Investigation into the Mechanism of Arc Erosion of a WCu Composite Contact and Its Dependence on the Temperature

Nächster Artikel Effect of Heat Input on Microstructure and Impact Toughness in the Simulated Coarse-Grained Heat-Affected Zones of X90 Pipeline Steel

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

L.Q. Zeng, Z.F. Zhe, and R.O. Ritchie, On the Materials Science of Nature’s Arms Race, Adv. Mater., 2018, 30, p 1–16. https://doi.org/10.1002/adma.201705220CrossRef

Q.F. Guan, H.B. Yang, Z.M. Han, Z.C. Ling, and S.H. Yu, An All-Natural Bioinspired Structural Material for Plastic Replacement, Nat. Commun., 2020, 11(1), p 1–7. https://doi.org/10.1038/s41467-020-19174-1CrossRef

J. Hu, Q.Y. Lv, X.M. Zhang, Z.Y. Wei, and H.L. Li, Finite Element Analysis of Layered, Variable Density, Ball Bearings Based on Pearl and Turtle Shell Bionic Structures, Ind. Lubr. Tribol., 2020, 72, p 779–787. https://doi.org/10.1108/ILT-10-2019-0413CrossRef

B. Alheit, S. Bargmann, and B.D. Reddy, Computationally Modelling the Mechanical Behaviour of Turtle Shell Sutures—A Natural Interlocking Structure, J. Mech. Behav. Biomed., 2020, 110, p 103973. https://doi.org/10.1016/j.jmbbm.2020.103973CrossRef

M.K. Islam, P.J. Hazell, J.P. Escobedo, and H. Wang, Biomimetic Armour Design Strategies for Additive Manufacturing: A Review, Mater. Design., 2021, 205, p 109730. https://doi.org/10.1016/j.matdes.2021.109730CrossRef

B.S. Lazarus, A. Velasco-Hogan, T. Gómez-del Río, M.A. Meyers, and I. Jasiuk, A Review of Impact Resistant Biological and Bioinspired Materials and Structures, J. Mater. Res. Technol., 2020, 9(6), p 15705–15738. https://doi.org/10.1016/j.jmrt.2020.10.062CrossRef

S.L. Benjamin, V.H. Audrey, and G.R. Teresa, A Review of Impact Resistant Biological and Bioinspired Materials and Structures, J. Mater. Res. Technol., 2020, 9, p 15705–15738. https://doi.org/10.1016/j.jmrt.2020.10.062CrossRef

N. Jongpairojcosit and P. Jearanaisilawong, Mechanical Properties and Numerical Simulation of Sulcata Tortoise Carapace, J. Mech. Behav. Biomed., 2017, 72, p 261–267. https://doi.org/10.1016/j.jmbbm.2017.04.012CrossRef

E. Ampaw, T.A. Owoseni, and F. Du, Compressive Deformation and Failure of Trabecular Structures in a Turtle Shell, Acta. Biomater., 2019, 97, p 535–543. https://doi.org/10.1016/j.actbio.2019.07.023CrossRef

10.

B. Achrai and H.D. Wagner, The Red-Eared Slider Turtle Carapace under Fatigue Loading: The Effect of Rib–Suture Arrangement, Mat. Sci. Eng. C-Mater., 2015, 53, p 128–133. https://doi.org/10.1016/j.msec.2015.04.040CrossRef

11.

B. Achrai, B. Bar-On, and H.D. Wagner, Bending Mechanics of the Red-Eared Slider Turtle Carapace, J. Mech. Behav. Biomed., 2014, 30, p 223–233. https://doi.org/10.1016/j.jmbbm.2013.09.009CrossRef

12.

B. Achrai and H.D. Wagner, The Turtle Carapace as an Optimized Multi-Scale Biological Composite Armor-A Review, J. Mech. Behav. Biomed., 2017, 73, p 50–67. https://doi.org/10.1016/j.jmbbm.2017.02.027CrossRef

13.

P. Jearanaisilawong, N. Jongpairojcosit, and C. Glunrawd, Dynamic Behaviors and Protection Mechanisms of Sulcata Tortoise Carapace, Comput. Method. Biomec., 2021, 24(13), p 1450–1462. https://doi.org/10.1080/10255842.2021.1892661CrossRef

14.

M. Xu and B.B. An, Dynamic Crack Propagation in the Turtle Carapace, Mech. Mater., 2020, 151, p 103614. https://doi.org/10.1016/j.mechmat.2020.103614CrossRef

15.

B.B. An, W. Sun, and D. Zhang, Role of Soft Bi-Layer Coating on the Protection of Turtle Carapace, J. Biomech., 2021, 126, p 110618. https://doi.org/10.1016/j.jbiomech.2021.110618CrossRef

16.

M. Cao, F. Jiang, R. Zhou, R. Qin, and H. Zhang, A Novel bio-Inspired Metal Hollow Sphere Filled TC4/Al Sandwich Composite: Fabrication and Compressive Properties, Mater. Today. Commun., 2022, 31, p 103349. https://doi.org/10.1016/j.mtcomm.2022.103349CrossRef

17.

B. Zhang, J.T. Jiang, L. Liu, W.Z. Shao, and L. Zhen, Texture Evolution and Recrystallization Mechanism in a Mg-3Al-1Zn Alloy under Ballistic Impact, J. Alloy. Compd., 2020, 816, p 152599. https://doi.org/10.1016/j.jallcom.2019.152599CrossRef

18.

J. Wang, L. Zhang, P. Jin, L. Chen, X. Yuan, and H. Ma, Microstructure Evolution and Constitutive Relation Establishment of Extruded Mg-1Al-6Y Alloy under High Speed Impact, J. Alloy. Compd., 2022, 908, p 164540. https://doi.org/10.1016/j.jallcom.2022.164540CrossRef

19.

X.D. Chen, L.W. Wang, L.Y. Yang, and Z.B. Cai, Investigation on the Impact Wear Behavior of 2.25 Cr–1Mo Steel at Elevated Temperature, Wear, 2021, 476, p 203740. https://doi.org/10.1016/j.wear.2021.203740CrossRef

20.

S.L. Ming, D. Qin, Z.Y. Li, Y. Ding, M. Liang, and Z.B. Cai, Fabrication and Characterization of Porous Micro-Arc Oxidation/Al Composite Coating: Bio-Inspired Strategy from Cancellous Bone Structure, J. Mater. Eng. Perform., 2020, 29(1), p 87–97. https://doi.org/10.1007/s11665-019-04533-xCrossRef

21.

Z.Y. Li, Z.B. Cai, and Y. Ding, Characterization of Graphene Oxide/ZrO₂ Composite Coatings Deposited on Zirconium Alloy by Micro-Arc Oxidation, Appl. Surf. Sci., 2020, 506, p 144928. https://doi.org/10.1016/j.apsusc.2019.144928CrossRef

22.

W. Liu, W. He, H. Jiang, Q. Wang, and Y. Lin, Influence of Graphene on Microstructure and Corrosion and Wear Resistance of Micro-Arc Oxidation Coatings on D16T Al Alloy Drill Pipe, J. Mater. Eng. Perform., 2021, 30, p 4162–4173. https://doi.org/10.1007/s11665-021-05727-yCrossRef

23.

Y. Xiong, X. Hu, Z. Weng, and R. Song, Stress Corrosion Resistance of Laser Shock Peening/Microarc Oxidation Reconstruction Layer Fabricated on AZ80 Magnesium Alloy in Simulated Body Fluid, J. Mater. Eng. Perform., 2020, 29(9), p 5750–5756. https://doi.org/10.1007/s11665-020-05076-2CrossRef

24.

J. Yan, Z. Lei, Z. Li, Z. Wang, S. Ren, and H. Shui, Molecular Structure Characterization of Low-Medium Rank Coals via XRD, Solid State 13C NMR and FTIR Spectroscopy, Fuel, 2020, 268, p 117038. https://doi.org/10.1016/j.fuel.2020.117038CrossRef

25.

W. Yang, Y. Gao, P. Guo, D. Xu, and L. Hu, Adhesion, Biological Corrosion Resistance and Biotribological Properties of Carbon Films Deposited on MAO Coated Ti Substrates, J. Mech. Behav. Biomed. Mater., 2020, 101, p 103448. https://doi.org/10.1016/j.jmbbm.2019.103448CrossRef

26.

K. Bu, J.T. Wang, H. Weng, and C. Chen, Topological Semimetal in an sp2-sp3 Hybridized Carbon Network with Nodal Rings, Phys. Rev. B., 2020, 101, p 205104. https://doi.org/10.1103/PhysRevB.101.205104CrossRef

27.

W. Zhu, Z. Su, J. Guo, and X. Meng, Preparation and Characterization of Diamond-Like Carbon (DLC) Film on 316L Stainless Steel by Microwave Plasma Chemical vapor Deposition (MPCVD), Diam. Relat. Mater., 2022, 122, p 108820. https://doi.org/10.1016/j.diamond.2022.108820CrossRef

28.

M. Ayiania, M. Smith, A.J. Hensley, and L. Scudiero, Deconvoluting the XPS Spectra for Nitrogen-Doped Chars: An Analysis from First Principles, Carbon, 2020, 162, p 528–544. https://doi.org/10.1016/j.carbon.2020.02.065CrossRef

29.

C. Chen, L. Meng, Y. Hu, and Z. Su, Graphene oxide-reinforced Poly (ether-ether-ketone)/Silica Composites with Improved Mechanical Performance and Surface Bioactivity, J. Mech. Behav. Biomed., 2021, 124, p 104811. https://doi.org/10.1016/j.jmbbm.2021.104811CrossRef

30.

Z.Y. Li, Z.B. Cai, X.J. Cui, and M.H. Zhu, Influence of Nanoparticle Additions on Structure and Fretting Corrosion Behavior of Micro-Arc Oxidation Coatings on Zirconium Alloy, Surf. Coat. Tech., 2021, 410, p 126949. https://doi.org/10.1016/j.surfcoat.2021.126949CrossRef

31.

K. Guzmán, S. Shaji, T.K. Roy, and B. Krishnan, Surface Modification of Sintered Magnesium Oxide (MgO) with Chromium Oxide (Cr₂O₃) by Pulsed Laser Irradiation in Air and Liquids, Ceram. Int., 2021, 47, p 21625–21632. https://doi.org/10.1016/j.ceramint.2021.04.175CrossRef

32.

G. Sun, D. Chen, and H. Wang, High-Velocity Impact Behaviour of Aluminium Honeycomb Sandwich Panels with Different Structural Configurations, Int. J. Impact. Eng., 2018, 122, p 119–136. https://doi.org/10.1016/j.ijimpeng.2018.08.007CrossRef

33.

B.D. Beake, S.J. McMaster, and T.W. Liskiewicz, Influence of Si-and W-Doping on Micro-Scale Reciprocating Wear and Impact Performance of DLC Coatings on Hardened Steel, Tribol. Int., 2021, 160, p 107063. https://doi.org/10.1016/j.triboint.2021.107063CrossRef

34.

X. Sui, J. Liu, S. Zhang, and J. Yang, Microstructure, Mechanical and Tribological Characterization of CrN/DLC/Cr-DLC Multilayer Coating with Improved Adhesive Wear Resistance, Appl. Surf. Sci., 2018, 439, p 24–32. https://doi.org/10.1016/j.apsusc.2017.12.266CrossRef

35.

Y. Zhang and A. Jourani, Combined Effect of Microstructure and Gaseous Environments on Oxidative and Adhesive Wear of Dual-Phase Steel, J. Mater. Eng. Perform., 2021, 30(12), p 9333–9351. https://doi.org/10.1007/s11665-021-06090-8CrossRef

36.

X. Rao, J. Yang, Z. Chen, Y. Yuan, and Q. Chen, Tuning C-C sp2/sp3 Ratio of DLC Films in FCVA System for Biomedical Application, Bioact. Mater., 2020, 5(2), p 192–200. https://doi.org/10.1016/j.bioactmat.2020.02.009CrossRef

37.

M. Khadem, V.E. Pukha, O.V. Penkov, and I.I. Khodos, Formation of Wear-Resistant Graphite/Diamond-Like Carbon Nanocomposite Coatings on Ti using Accelerated C60-Ions, Surf. Coat. Tech., 2021, 424, p 127670. https://doi.org/10.1016/j.surfcoat.2021.127670CrossRef

38.

K. Li, G. Xu, X. Wen, and J. Zhou, High-Temperature Friction Behavior of Amorphous Carbon Coating in Glass Molding Process, Friction, 2021, 9, p 1648–1659. https://doi.org/10.1007/s40544-020-0452-6CrossRef

39.

Y. Sun, J. Li, H. Yang, and X. Kang, Effect of Electric Current on the Microstructural Evolution and Tribological Behavior of Highly Oriented Pyrolytic Graphite, J. Mater. Sci., 2020, 55, p 7283–7294. https://doi.org/10.1007/s10853-020-04518-5CrossRef

40.

Z.Y. Li, Z.B. Cai, Y. Cui, J.H. Liu, and M.H. Zhu, Effect of oxidation time on the impact wear of micro-arc oxidation coating on aluminum alloy, Wear, 2019, 426–427, p 285–295. https://doi.org/10.1016/j.wear.2019.01.084CrossRef

Titel: New Impact Resistance Bionic Composite Coating Inspired by Turtle Shell
verfasst von: Zheng-yang Li
Zhen-bing Cai
Teng Zhou
Xue-jun Cui
Min-hao Zhu
Publikationsdatum: 18.07.2022
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 1/2023
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-022-07087-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2023

Effect of Heat Input on Microstructure and Impact Toughness in the Simulated Coarse-Grained Heat-Affected Zones of X90 Pipeline Steel

Microstructure-Induced High-Strain-Rate Deformation Behavior of Heat-Treated 17-4 PH Stainless Steel

Correction to: An Improved Prediction Model on Fatigue Crack Growth Rate under Variable Amplitude Loads for Metallic Materials

An Investigation into the Mechanism of Arc Erosion of a WCu Composite Contact and Its Dependence on the Temperature

Tribological Behavior of a Multi-walled Carbon Nanotube Coated Porous Ti-Ta Shape Memory Alloy

Investigation on Post-Deformation Recrystallization Behavior of 22MnB5 Steel based on Stress Relaxation

Premium Partner

Marktübersichten