nach oben

Arabian Journal for Science and Engineering

Erschienen in:

07.06.2021 | Research Article-Mechanical Engineering

Numerical Analysis of the Combustion in Micro Gas Turbine with Methane/Biogas Fuels

verfasst von: Xiaoyu Chen, Weiguo Zhou, Yunfei Jia, Junying Tang

Erschienen in: Arabian Journal for Science and Engineering | Ausgabe 12/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Replacing natural gas with the environmentally sustainable biogas is a promising way to reduce the usage of fossil fuels and promote organic waste utilization. Micro gas turbine (MGT), as a common power supply machine, is capable of adopting biogas as the fuel. Given the different intrinsic components between natural gas and biogas, combustion performance of biogas in MGT was studied in this work. The effects of fuel composition and excess air coefficient on combustion performance were analyzed through three-dimensional numerical simulation of the MGT combustor. RNG k-ε turbulent model, eddy-dissipation/finite rate model, and eight-step reaction mechanism were adopted in the simulation. The results showed that when the CO₂ percentage in biogas increases, the NO and CO emissions decreases. However, the fuel rate and pressure drop of combustion chamber increases to maintain constant thermal input. The overall high velocity also increases the requirement for materials of combustion chamber. Furthermore, the average temperature of whole combustor decreases when the excess air coefficient increases. Accordingly, the CO₂ mole fraction in biogas should be controlled below 30% and the optimal range of the excess air coefficient is 2–2.5 for the MGT.

Vorheriger Artikel Realistic Availability Assessment of Energy System Behavior Patterns by Monte Carlo Method

Nächster Artikel Process Parameters Effect Investigations on Viscosity of Water-ethylene Glycol-based α-alumina Nanofluids: An Ultrasonic Experimental and Statistical Approach

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Bing, W.; Wang, Z.; Lu, J.; Li, L.: Asme: Research of optimal operation on micro-turbine CCHP systems. In: Proceedings of the Energy Sustainability Conference 2007, (2007)

Iodice, P.; Langella, G.; Amoresano, A.; Senatore, A.: Comparative exergetic analysis of solar integration and regeneration in steam power plants. J. Energy Eng. (2017). https://doi.org/10.1061/(asce)ey.1943-7897.0000477CrossRef

Zhu, M.; Wu, X.; Li, Y.; Shen, J.; Zhang, J.: IEEE: modeling and model predictive control of micro gas turbine-based combined cooling, heating and power system. In: Proceedings of the 28th Chinese Control and Decision Conference. Chinese Control and Decision Conference, pp. 65–70. (2016)

Pilavachi, P.A.: Mini- and micro-gas turbines for combined heat and power. Appl. Therm. Eng. 22(18), 2003–2014 (2002). https://doi.org/10.1016/s1359-4311(02)00132-1CrossRef

Wang, S.; Ruan, Y.; Zhou, W.; Li, Z.; Wu, J.; Liu, D.: Net energy analysis of small-scale biogas self-supply anaerobic digestion system operated at psychrophilic to thermophilic conditions. J. Clean. Prod. 174, 226–236 (2018). https://doi.org/10.1016/j.jclepro.2017.10.186CrossRef

Mordaunt, C.J.; Pierce, W.C.: Design and preliminary results of an atmospheric-pressure model gas turbine combustor utilizing varying CO2 doping concentration in CH4 to emulate biogas combustion. Fuel 124, 258–268 (2014). https://doi.org/10.1016/j.fuel.2014.01.097CrossRef

Chakrabarty, S.; Boksh, F.I.M.M.; Chakraborty, A.: Economic viability of biogas and green self-employment opportunities. Renew. Sustain. Energy Rev. 28, 757–766 (2013). https://doi.org/10.1016/j.rser.2013.08.002CrossRef

Ali, G.; Nitivattananon, V.; Abbas, S.; Sabir, M.: Green waste to biogas: renewable energy possibilities for Thailand’s green markets. Renew. Sustain. Energy Rev. 16(7), 5423–5429 (2012). https://doi.org/10.1016/j.rser.2012.05.021CrossRef

Camilo Solarte-Toro, J.; Chacon-Perez, Y.; Ariel Cardona-Alzate, C.: Evaluation of biogas and syngas as energy vectors for heat and power generation using lignocellulosic biomass as raw material. Electron. J. Biotechnol. 33, 52–62 (2018). https://doi.org/10.1016/j.ejbt.2018.03.005CrossRef

10.

Liu, J.; Zhang, W.; Yin, F.; Liu, S.; Liu, J.; Zhao, X.; Xu, L.; Chen, Y.: Experimental study on potential of biogas fermentation with walnut peel. In: Zhang, H., Jin, D., Zhao, X.J. (eds.) Advanced Materials Research, vol. 788, pp. 705–708. (2013). https://doi.org/10.4028/www.scientific.net/AMR.788.705

11.

Bilandzija, N.; Voca, N.; Kricka, T.; Jurisic, V.; Matin, A.: Biogas production on dairy farms: a croatia case study. Mljekarstvo 63(1), 22–29 (2013)

12.

Poeschl, M.; Ward, S.; Owende, P.: Environmental impacts of biogas deployment - Part II: life cycle assessment of multiple production and utilization pathways. J. Clean. Prod. 24, 184–201 (2012). https://doi.org/10.1016/j.jclepro.2011.10.030CrossRef

13.

Poeschl, M.; Ward, S.; Owende, P.: Evaluation of energy efficiency of various biogas production and utilization pathways. Appl. Energy 87(11), 3305–3321 (2010). https://doi.org/10.1016/j.apenergy.2010.05.011CrossRef

14.

Hashim, M.A.; Khalid, A.; Salleh, H.; Sunar, N.M.: Effects of fuel and nozzle characteristics on micro gas turbine system: a review. in: international research and innovation summit, vol. 226. In: IOP Conference Series-Materials Science and Engineering. (2017)

15.

Okoroigwe, E.C.; Madhlopa, A.: Advances in biofueling of micro gas turbines for power generation. Energy Technol. (2019). https://doi.org/10.1002/ente.201800689CrossRef

16.

Hosseini, S.E.; Wahid, M.A.: Biogas utilization: experimental investigation on biogas flameless combustion in lab-scale furnace. Energy Convers. Manage. 74, 426–432 (2013). https://doi.org/10.1016/j.enconman.2013.06.026CrossRef

17.

Hosseini, S.E.; Wahid, M.A.: Development of biogas combustion in combined heat and power generation. Renew. Sustain. Energy Rev. 40, 868–875 (2014). https://doi.org/10.1016/j.rser.2014.07.204CrossRef

18.

Liu, H.; Wang, Y.; Yu, T.; Liu, H.; Cai, W.; Weng, S.: Effect of carbon dioxide content in biogas on turbulent combustion in the combustor of micro gas turbine. Renew. Energy 147, 1299–1311 (2020). https://doi.org/10.1016/j.renene.2019.09.014CrossRef

19.

Kang, D.W.; Kim, T.S.; Hur, K.B.; Park, J.K.: The effect of fixing biogas on the performance and operating characteristics of simple and recuperative cycle gas turbine combined heat and power systems. Appl. Energy 93, 215–228 (2012). https://doi.org/10.1016/j.apenergy.2011.12.038CrossRef

20.

Liu, A.; Yang, Y.; Chen, L.; Zeng, W.; Wang, C.: Experimental study of biogas combustion and emissions for a micro gas turbine. Fuel (2020). https://doi.org/10.1016/j.fuel.2020.117312CrossRef

21.

Guessab, A.; Aris, A.; Cheikh, M.; Baki, T.: Combustion of methane and biogas fuels in gas turbine can-type combustor model. J. Appl. Fluid Mech. 9(5), 2229–2238 (2016)

22.

C65 Microturbine High-pressure Natural Gas. https://d1io3yog0oux5.cloudfront.net/_c3fbb9b1ffce43c939f0ae989a647cac/capstoneturbine/db/235/9438/file/C65+High+Pressure+Natural+Gas.pdf. Accessed from Jun 2020

23.

Shih, H.-Y.; Liu, C.-R.: A computational study on the combustion of hydrogen/methane blended fuels for a micro gas turbines. Int. J. Hydrog. Energy 39(27), 15103–15115 (2014). https://doi.org/10.1016/j.ijhydene.2014.07.046CrossRef

24.

Gray, D.D.; Giorgini, A.: Validity of boussinesq approximation for liquids and gases. Int. J. Heat Mass Transf. 19(5), 545–551 (1976). https://doi.org/10.1016/0017-9310(76)90168-xCrossRefMATH

25.

Mardani, A.; Fazlollahi-Ghomshi, A.: Numerical investigation of a double-swirled gas turbine model combustor using a RANS approach with different turbulence-chemistry interaction models. Energy Fuels 30(8), 6764–6776 (2016). https://doi.org/10.1021/acs.energyfuels.6b00452CrossRef

26.

Nemitallah, M.A.; Habib, M.A.: Experimental and numerical investigations of an atmospheric diffusion oxy-combustion flame in a gas turbine model combustor. Appl. Energy 111, 401–415 (2013). https://doi.org/10.1016/j.apenergy.2013.05.027CrossRef

27.

Cadorin, M.; Pinelli, M.; Vaccari, A.; Calabria, R.; Chiariello, F.; Massoli, P.; Bianchi, E.: Analysis of a micro gas turbine fed by natural gas and synthesis gas: MGT test bench and combustor CFD analysis. J. Eng. Gas Turbines Power-Trans. Asme (2012). https://doi.org/10.1115/14005977CrossRef

28.

Zeng, Z.; Du, P.; Wang, Z.; Li, K.: Combustion flow in different advanced vortex combustors with/without vortex generator. Aerosp. Sci. Technol. 86, 640–649 (2019). https://doi.org/10.1016/j.ast.2019.01.048CrossRef

29.

Smith, G.P.; Golden, D.M..; Frenklach, M.; Moriarty, N.W.; Eiteneer, B.; Goldenberg, M.; Bowman, C.T.; Hanson, R.K.; Song, S.: William C. Gardiner, Jr., Vitali V. Lissianski, and Zhiwei Qin GRI- Mech 3.0. (2014). Accessed from Jun 2020

30.

Meziane, S.; Bentebbiche, A.: Numerical study of blended fuel natural gas-hydrogen combustion in rich/quench/lean combustor of a micro gas turbine. Int. J. Hydrog. Energy 44(29), 15610–15621 (2019). https://doi.org/10.1016/j.ijhydene.2019.04.128CrossRef

31.

Fortunato, V.; Giraldo, A.; Rouabah, M.; Nacereddine, R.; Delanaye, M.; Parente, A.: Experimental and numerical investigation of a MILD combustion chamber for micro gas turbine applications. Energies (2018). https://doi.org/10.3390/en11123363CrossRef

32.

Novosselov, I.V.; Malte, P.C.: Asme: Development and application of an eight-step global mechanism for CFD and CRN simulations of lean-premixed combustors. In: Proceedings of the Asme Turbo Expo, Vol 2, (2007)

33.

Manca, D.; Buzzi-Ferraris, G.: The solution of very large non-linear algebraic systems. In: Braunschweig, B., Joulia, X. (eds.) In: 18th European Symposium on Computer Aided Process Engineering, vol. 25. Computer Aided Chemical Engineering, pp. 587–592. (2008)

34.

Dang, B.: Numerical study and investigation of annular combustor of micro gas turbine. Theses, Shanghai Jiao Tong Univ. (2015)

Titel: Numerical Analysis of the Combustion in Micro Gas Turbine with Methane/Biogas Fuels
verfasst von: Xiaoyu Chen
Weiguo Zhou
Yunfei Jia
Junying Tang
Publikationsdatum: 07.06.2021
Verlag: Springer Berlin Heidelberg
Erschienen in: Arabian Journal for Science and Engineering / Ausgabe 12/2021
Print ISSN: 2193-567X
Elektronische ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-021-05731-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2021

Recent Advancements of Micro-Lattice Structures: Application, Manufacturing Methods, Mechanical Properties, Topologies and Challenges

Evaluation of Cell Parameter Variation on Energy Absorption Characteristic of Thermoplastic Honeycomb Sandwich Structure

Comparison of the Performance of the Methods Used to Find the Weibull Parameters at Different Heights

Theoretical Exploration of Thermal Transportation with Lorentz Force for Fourth-Grade Fluid Model Obeying Peristaltic Mechanism

Shape and Orientation Effect on Natural Convection Around a Heated Vertical Cone, Which Loses Heat from All Its Surfaces

Effect of Spherical Joint Symmetry Axis Orientation on the Kinematic Performance of Lower Mobility Parallel Manipulators

Premium Partner

Marktübersichten