nach oben

Lasers in Manufacturing and Materials Processing

Erschienen in:

07.09.2021

Numerical Simulation of Thermal Behavior and Experimental Investigation of Thin Walls during Direct Metal Deposition of 316L Stainless Steel Powder

verfasst von: Zahra Mianji, A. A. Kholopov, I. I. Binkov, Ali Kiani

Erschienen in: Lasers in Manufacturing and Materials Processing | Ausgabe 4/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Direct metal deposition (DMD) is a method of additive manufacturing in which parts are manufactured by melting powder particles that reach the working area, layer by layer, using a laser beam. Thin walls are built by the means of direct metal deposition (DMD) from 316L stainless steel powder. A multi-layer finite element model (FEM) is used to predict the thermal cycles, maximum temperatures, and volume of the molten pool during DMD. The experimental methods and the simulation processes show effects of heat accumulation with the addition of new layers, especially at the beginning and at the end of each layer. The microstructure of the samples is examined by an optical microscope. The experimental results indicate that microstructure has a disorganised form in the outer regions that are closer to the surrounding air, and that grains grow in groups in the inner parts of the samples.

Vorheriger Artikel A Comparative Stress Corrosion Cracking Study of Stainless Steel Sheets Marked with Laser and Conventional Mechanical Stamping

Nächster Artikel Investigation on Surface Morphology and Dimensional Characteristics of Micro-channels Fabricated on Titanium-V Alloy by DPSS Nd:YAG Laser

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Gladush, G.G., Smurov, I.: Physics of laser materials processing: theory and experiment. Springer Series in Materials Science. 146(1), 534–553 (2011). https://doi.org/10.1007/978-3-642-19831-1CrossRef

Toyserkani, E., Khajepour, A., Corbin, S.: Laser cladding. CRC Press, Boca Raton, Florida (2004)

Shojarazavi, R.: Additive Construction with Direct Laser Deposition, 1st edn. Malek-Ashtar University of Technology, Tehran (2019)

Grigoryants, A., Shiganov, N., Misyurov, A., Tretyakov, R.: Laser Additive Technologies in Mechanical Engineering, 1st edn. Bauman Moscow State Technical University, Moscow (2019)

Volpp, J., Prasad, H.S., Riede, M., Brueckner, F., Kaplan, A.F.H.: Powder particle attachment mechanisms onto liquid material. Procedia CIRP. 74, 140–143 (2018). https://doi.org/10.1016/j.procir.2018.08.064CrossRef

Saboori, A., Piscopo, G., Lai, M., Salmi, A., Biamino, S.: An investigation on the effect of deposition pattern on the microstructure, mechanical properties and residual stress of 316L produced by directed energy deposition. Mater Sci Eng A. 780, 139179 (2020). https://doi.org/10.1016/j.msea.2020.139179CrossRef

He, X., Mazumder, J.: Transport phenomena during direct metal deposition. J. Appl. Phys. 101(5), (2007). https://doi.org/10.1063/1.2710780

Saboori, A., et al.: An investigation on the effect of powder recycling on the microstructure and mechanical properties of AISI 316L produced by directed energy deposition. Mater Sci Eng A. 766, 138360 (2019). https://doi.org/10.1016/j.msea.2019.138360CrossRef

Hussein, A., Hao, L., Yan, C., Everson, R.: Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting. Mater Des. 52, 638–647 (2013). https://doi.org/10.1016/j.matdes.2013.05.070CrossRef

10.

Adhitan, R.K., Raghavan, N.: Transient thermo-mechanical modeling of stress evolution and re-melt volume fraction in Electron beam additive manufacturing process. Procedia Manuf. 11, 571–583 (2017). https://doi.org/10.1016/j.promfg.2017.07.151CrossRef

11.

Shi, Q., Gu, D., Xia, M., Cao, S., Rong, T.: Effects of laser processing parameters on thermal behavior and melting/solidification mechanism during selective laser melting of TiC/Inconel 718 composites. Opt Laser Technol. 84, 9–22 (2016). https://doi.org/10.1016/j.optlastec.2016.04.009CrossRef

12.

Liu, Y., Zhang, J., Pang, Z.: Numerical and experimental investigation into the subsequent thermal cycling during selective laser melting of multi-layer 316L stainless steel. Opt Laser Technol. 98, 23–32 (2018). https://doi.org/10.1016/j.optlastec.2017.07.034CrossRef

13.

Pant, P., Chatterjee, D., Samanta, S. K., Nandi, T., Lohar, A. K.: A bottom-up approach to experimentally investigate the deposition of austenitic stainless steel in laser direct metal deposition system. J. Brazilian Soc. Mech. Sci. Eng. 42(2) (2020). https://doi.org/10.1007/s40430-019-2166-0

14.

Zhu, G., Zhang, A., Li, D., Tang, Y., Tong, Z., Lu, Q.: Numerical simulation of thermal behavior during laser direct metal deposition. Int J Adv Manuf Technol. 55(9–12), 945–954 (2011). https://doi.org/10.1007/s00170-010-3142-0CrossRef

15.

Amine, T., Newkirk, J.W., Liou, F.: Investigation of effect of process parameters on multilayer builds by direct metal deposition. Appl Therm Eng. 73(1), 500–511 (2014). https://doi.org/10.1016/j.applthermaleng.2014.08.005CrossRef

16.

Tang, Y.J., Zhang, Y.Z., Liu, Y.T.: Numerical and experimental investigation of laser additive manufactured Ti2AlNb-based alloy. J Alloys Compd. 727, 196–204 (2017). https://doi.org/10.1016/j.jallcom.2017.08.069CrossRef

17.

Zhang, Y., Yu, G., He, X.: Numerical study of thermal history in laser aided direct metal deposition process. Sci China Physics, Mech Astron. 55(8), 1431–1438 (2012). https://doi.org/10.1007/s11433-012-4793-7CrossRef

18.

Zhang, Y., Huang, W.: Comparisons of 304 austenitic stainless steel manufactured by laser metal deposition and selective laser melting. J Manuf Process. 57, 324–333 (2020). https://doi.org/10.1016/j.jmapro.2020.06.042CrossRef

19.

Weng, F., Gao, S., Jiang, J., Wang, J.J., Guo, P.: A novel strategy to fabricate thin 316L stainless steel rods by continuous directed energy deposition in Z direction. Addit Manuf. 27, 474–481 (2019). https://doi.org/10.1016/j.addma.2019.03.024CrossRef

20.

Li, Y., Gu, D.: Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder. Mater Des. 63, 856–867 (2014). https://doi.org/10.1016/j.matdes.2014.07.006CrossRef

21.

Kostin, V., Grigorenko, G.: Simulation of the additive process of forming 3D products from HSLA steel 09G2S. Proceedings of the 2017 COMSOL Conference in Rotterdam, Netherlands

22.

Tao, W., Lingchao, Q., Jiaqi, L.: Parameter analysis of thermal behavior during laser melting of Ti-6Al-4V alloy powder. Int J Adv Manuf Technol. 104(5–8), 2875–2885 (2019). https://doi.org/10.1007/s00170-019-04060-yCrossRef

23.

Zhan, M.J., Sun, G.F., Wang, Z.D., Shen, X.T., Yan, Y., Ni, Z.H.: Numerical and experimental investigation on laser metal deposition as repair technology for 316L stainless steel. Opt Laser Technol. 118, 84–92 (2019). https://doi.org/10.1016/j.optlastec.2019.05.011CrossRef

24.

Tabernero, I., Lamikiz, A., Martínez, S., Ukar, E., López De Lacalle, L.N.: Modelling of energy attenuation due to powder flow-laser beam interaction during laser cladding process. J Mater Process Technol. 212(2), 516–522 (2012). https://doi.org/10.1016/j.jmatprotec.2011.10.019CrossRef

25.

Foroozmehr, A., Badrossamay, M., Foroozmehr, E., Golabi, S.: Finite element simulation of selective laser melting process considering optical penetration depth of laser in powder bed. Mater Des. 89, 255–263 (2016). https://doi.org/10.1016/j.matdes.2015.10.002CrossRef

26.

Yin, J., Zhu, H., Ke, L., Lei, W., Dai, C., Zuo, D.: Simulation of temperature distribution in single metallic powder layer for laser micro-sintering. Comput Mater Sci. 53(1), 333–339 (2012). https://doi.org/10.1016/j.commatsci.2011.09.012CrossRef

27.

Zhang, C., et al.: Additive manufacturing of functionally graded materials: a review. Mater Sci Eng A. 764, 138209 (2019). https://doi.org/10.1016/j.msea.2019.138209CrossRef

28.

Saboori, A., Aversa, A., Marchese, G., Biamino, S., Lombardi, M., Fino, P.: Microstructure and mechanical properties of AISI 316L produced by directed energy deposition-based additive manufacturing: a review. Appl Sci. 10(9) (2020). https://doi.org/10.3390/app10093310

29.

Akbari, M., Kovacevic, R.: An investigation on mechanical and microstructural properties of 316LSi parts fabricated by a robotized laser/wire direct metal deposition system. Addit. Manuf. 23, 487–497 (2018). https://doi.org/10.1016/j.addma.2018.08.031CrossRef

30.

El Cheikh, H., Courant, B., Branchu, S., Huang, X., Hascot, J.Y., Guilln, R.: Direct laser fabrication process with coaxial powder projection of 316L steel. Geometrical characteristics and microstructure characterization of wall structures. Opt Lasers Eng. 50(12), 1779–1784 (2012). https://doi.org/10.1016/j.optlaseng.2012.07.002CrossRef

Titel: Numerical Simulation of Thermal Behavior and Experimental Investigation of Thin Walls during Direct Metal Deposition of 316L Stainless Steel Powder
verfasst von: Zahra Mianji
A. A. Kholopov
I. I. Binkov
Ali Kiani
Publikationsdatum: 07.09.2021
Verlag: Springer US
Erschienen in: Lasers in Manufacturing and Materials Processing / Ausgabe 4/2021
Print ISSN: 2196-7229
Elektronische ISSN: 2196-7237
DOI: https://doi.org/10.1007/s40516-021-00155-1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2021

Investigation on Laser Beam Weldability of AISI 304L Plates Based on Thermal Field Simulation by Experimentally-Fitted Analytical Modeling

Investigation on Surface Morphology and Dimensional Characteristics of Micro-channels Fabricated on Titanium-V Alloy by DPSS Nd:YAG Laser

Efficient Yet Accessible Arduino-based Control System for Laser Microfabrication of Photonic Platforms

Monitoring Opportunities in Fiber Laser Flame Cutting

A Comparative Stress Corrosion Cracking Study of Stainless Steel Sheets Marked with Laser and Conventional Mechanical Stamping

Premium Partner

Marktübersichten