nach oben

Journal of Materials Engineering and Performance

Erschienen in:

29.10.2021

Performance of Vibration-Assisted Laser Welded Joints Based on Orthogonal Experiment Design

verfasst von: Qinghua Lu, Jiewen Jin, Peilei Zhang, Hua Yan, Haichuan Shi, Jian Zhao

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 3/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Vibration-assisted welding was a potential method to improve the microstructure and performance of the welded joints. In this paper, the micro-vibration-assisted laser welding experiment of 6082 aluminum alloy was designed based on the L₉(3⁴) orthogonal table, the experiment showed that the crystal grains in the weld center were mainly fine and uniform equiaxed crystal regions, and the dendrite grains were distributed in there. The microhardness fluctuated significantly, the average hardness level is 68HV, and the average tensile strength of the welded joints is 223MPa, which reached 70.8% of the base metal (BM) strength. The fatigue limit σ_0.1 of the BM is 135.5MPa, and the welded specimens were tested under 8 different stress level groups, which confirmed that the life distribution satisfied the logarithmic normal distribution, and P-S-N curve was obtained by fitting. The tensile strength and elongation of the welded specimens were taken as the evaluation indicators, and the comprehensive analysis showed that the best micro-vibration-assisted laser welding process parameters correspond to 6-1 specimen, which aimed to enrich the understanding of the fatigue fracture behavior of the joints under vibration stress, provided reference for the development of anti-fatigue design and reliability evaluation of the micro-vibration-assisted laser welded joints.

Vorheriger Artikel Residual Stresses, Microstructure, and Mechanical Properties of Electron Beam Welded Thick S1100 Steel

Nächster Artikel Effect of Anisotropy on the Manufacturing Process of Mg-Zn-Zr Alloy Connecting Rod

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

A. Dw, B. Ara, C. Jdva, B. Rca, A. Fl and A. Jp, Developments in Laser Welding of Aluminum Alloys, Adv. Welding Deform., 2021 https://doi.org/10.1016/B978-0-12-822049-8.00005-0CrossRef

H.B. Chen, K. Yan, T. Lin, S.B. Chen, C.Y. Jiang and Z. Yong, The Investigation of Typical Welding Defects for 5456 Aluminum Alloy Friction Stir Welds, Mater Sci Eng A-Struct, 2006, 433(1–2), p 64–69. https://doi.org/10.1016/j.msea.2006.06.056CrossRef

L. Zhang, H. Zhong, S. Li, H. Zhao, J. Chen and L. Qi, Microstructure, Mechanical Properties and Fatigue Crack Growth Behavior of Friction Stir Welded Joint of 6061–T6 Aluminum Alloy, Int J Fatigue, 2020 https://doi.org/10.1016/j.ijfatigue.2020.105556CrossRef

B. Dhakal and S. Swaroop, Review: Laser Shock Peening As Post Welding Treatment Technique, J Manuf Process, 2018, 32, p 721–733. https://doi.org/10.1016/j.jmapro.2018.04.006CrossRef

M.J. Jose, S.S. Kumar and A. Sharma, Vibration Assisted Welding Processes and Their Influence on Quality of Welds, Sci Technol Weld Jt, 2016, 21(4), p 243–258. https://doi.org/10.1179/1362171815Y.0000000088CrossRef

T. Wen, S.Y. Liu, S. Chen, L.T. Liu and C. Yang, Influence of High Frequency Vibration on Microstructure and Mechanical Properties of TIG Welding Joints of AZ31 Magnesium Alloy, Trans Nonferrous Met Soc. China, 2015, 25(2), p 397–404. https://doi.org/10.1016/S1003-6326(15)63616-0CrossRef

J. Jin, Q. Lu, P. Zhang, C. Li and H. Yan, A study on the microstructure and fatigue properties of welding joints in vibration-assisted laser welding process, Steel Res Int, 2020 https://doi.org/10.1002/srin.201900548CrossRef

O. Barooni, M. Abbasi, M. Givi and B. Bagheri, New Method to Improve the Microstructure and Mechanical Properties of Joint Obtained Using FSW, Int J Adv Manuf Tech, 2017 https://doi.org/10.1007/s00170-017-0810-3CrossRef

Y. Ding, R. Tian, X. Wang, C. Hang, Yu. Fang, L. Zhou, X. Meng and Y. Tian, Coupling Effects of Mechanical Vibrations and Thermal Cycling on Reliability of CCGA Solder Joints, Microelectron Reliab, 2015, 55(11), p 2396–2402. https://doi.org/10.1016/j.microrel.2015.06.118CrossRef

10.

C. Cac, U. Dc, S. Ep and S. Pml, Advantages of Vibration in the GMAW Process for Improving the Quality and Mechanical Properties, Int J Mech Mechatron Eng, 2015, 9(6), p 1107–1111. https://doi.org/10.5281/zenodo.1107706CrossRef

11.

S. Amini and M.R. Amiri, Study of Ultrasonic Vibrations’ Effect on Friction Stir Welding, Int J Adv Manuf Tech, 2014, 73(1–4), p 127–135. https://doi.org/10.1007/s00170-014-5806-7CrossRef

12.

H. Liu, Q. Xu, C. Wang and X. Zhang, Corrosion and Wear Behavior of Ni60CuMoW Coatings Fabricated by Combination of Laser Cladding and Mechanical Vibration Processing, J Alloys Compd, 2015, 621, p 357–363. https://doi.org/10.1016/j.jallcom.2014.10.030CrossRef

13.

C. Li, S. Li, M. Zeng, S. Sun, F. Wang and Y. Wang, Effect of High-Frequency Micro-Vibration on Microstructure and Properties of Laser Cladding Aluminum Coatings, Int J Adv Manuf Tech, 2019, 103(1), p 1633–1642. https://doi.org/10.1007/s00170-019-03783-2CrossRef

14.

N.S. Biradar and R. Raman, Grain Refinement in Al-Mg-Si Alloy TIG Welds using Transverse Mechanical Arc Oscillation, J Mater Eng Perform, 2012, 21(11), p 2495–2502. https://doi.org/10.1007/s11665-012-0207-2CrossRef

15.

C.C. Hsieh, P.S. Wang, J.S. Wang and W. Wu, Evolution of Microstructure and Residual Stress Under Various Vibration Modes in 304 Stainless Steel Welds, Sci World J, 2013, 2014(48), 895790. https://doi.org/10.1155/2014/895790CrossRef

16.

Y.B. Zhong, C. Wu and G.K. Padhy, Effect of Ultrasonic Vibration on Welding load, Temperature and Material Flow in Friction Stir Welding, J Mater Process Technol, 2017, 239, p 273–283. https://doi.org/10.1016/j.jmatprotec.2016.08.025CrossRef

17.

H. Dong, L. Yang, C. Dong and S. Kou, Improving Arc Joining of Al to steel and Al to Stainless Steel, Mater Sci Eng A-Struct, 2012, 534, p 424–435. https://doi.org/10.1016/j.msea.2011.11.090CrossRef

18.

S. Fouladi and M. Abbasi, The Effect of Friction Stir Vibration Welding Process on Characteristics of SiO₂ Incorporated Joint, J Mater Process Technol, 2017, 243, p 23–30. https://doi.org/10.1016/j.jmatprotec.2016.12.005CrossRef

19.

C.C. Hsieh, C.H. Lai and W. Wu, Effect of Vibration on Microstructures and Mechanical Properties of 304 Stainless Steel GTA Welds, Met Mater Int, 2013, 19(4), p 835–844. https://doi.org/10.1007/s12540-013-4026-2CrossRef

20.

J. Chen, C. Xu and Z. Luo, Effect of Mechanical Vibration on Microstructure and Properties of cast AZ91D Alloy, Resulte Phys, 2018, 11, p 1022–1027. https://doi.org/10.1016/j.rinp.2018.10.047CrossRef

21.

T. Reza, E.A. Reza, A.S. Mehdi and Y.A. Reza, The Effect of Harmonic Vibration with a Frequency below the Resonant Range on the Mechanical Properties of AA-5083-H321 Aluminum Alloy GMAW Welded Parts, Mater Sci Eng A-Struct, 2018, 625, p 350–435. https://doi.org/10.1016/j.msea.2018.08.106CrossRef

22.

M.A. Ghadam Dezfuli, R. Dehmolaei and S.R. Alavi Zaree, Microstructural Aspects of 304 Stainless Steel Weld Joints with the Simultaneous Application of Electromagnetic Vibration, Metallography, Microstruct Analy., 2019 https://doi.org/10.1007/s13632-019-00521-8CrossRef

23.

J.S. Wang, C.C. Hsieh, C.M. Lin, E.C. Chen and W. Wu, The Effect of Residual Stress Relaxation by the Vibratory Stress Relief Technique on the Textures of Grains in AA 6061 Aluminum Alloy, Mater Sci Eng A-Struct, 2014, 605(3), p 98–107. https://doi.org/10.1016/j.msea.2014.03.037CrossRef

24.

H.H. Lai, C.C. Hsieh, C.M. Lin and W. Wu, Effect of Oscillating Traverse Welding on Microstructure Evolution and Characteristic of Hypoeutectic Hard Facing Alloy, Surf Coat Tech, 2014, 239, p 233–239. https://doi.org/10.1016/j.surfcoat.2013.11.048CrossRef

25.

C. Li, Q. Zhang, F. Wang, P. Deng, Q. Lu, Y. Zhang et al., Microstructure and Wear Behaviors of wc-ni Coatings Fabricated by Laser Cladding Under High Frequency Micro-Vibration, Appl Surf Sci, 2019, 485, p 513–519. https://doi.org/10.1016/j.apsusc.2019.04.245CrossRef

26.

Li, C, Sun, S, Liu, C, Lu, Q, & Wang, Y. Microstructure and Mechanical Properties of TiC/AlSi10Mg Alloy Fabricated by Laser Additive Manufacturing Under High-Frequency Micro-Vibration. J Alloy Compd, 2019, 794(C):236-246. https://doi.org/10.1016/j.jallcom.2019.04.287

27.

J. Jin, Q. Lu, P. Zhang, C. Li and H. Yan, Research on Microstructure and Fatigue Properties of Vibration-Assisted 5052 Aluminum Alloy Laser Welded Joints, J Mater Eng Perform, 2020, 29(4), p 1–9. https://doi.org/10.1007/s11665-020-04923-6CrossRef

28.

Z. Wei, L. Qinghua, Z. Peilei, Y. Hua, R. Xinhuai and B. Yongzhen, Vibration Parameters Optimum of 316L Steel Laser Welding Under High Frequency Micro-Vibration Condition, Mater Res Express, 2018, 6, p 046541. https://doi.org/10.1088/2053-1591/aaf838CrossRef

29.

Y. Ou, Q. Lu, C. Li, H. Yan, P. Zhang and J. Jin, Effect of Vibration Frequency on Microstructure and Properties of Laser-Welded Inconel 718 Nickel-Base Superalloy, J Mater Eng Perform, 2021, 30, p 2399–2407. https://doi.org/10.1007/s11665-020-05392-7CrossRef

30.

A. Mostafapour and V. Gholizadeh, Experimental Investigation of the Effect of Vibration on Mechanical Properties of 304 Stainless Steel Welded Parts, Int J Adv Manuf Technol, 2014, 70(5–8), p 1113–1124. https://doi.org/10.1007/s00170-013-5350-xCrossRef

31.

P.K. Singh, S.D. Kumar, D. Patel et al., Optimization of Vibratory Welding Process Parameters Using Response Surface Methodology, J Mech Sci Technol, 2017, 31(5), p 2487–2495. https://doi.org/10.1007/s12206-017-0446-0CrossRef

Titel: Performance of Vibration-Assisted Laser Welded Joints Based on Orthogonal Experiment Design
verfasst von: Qinghua Lu
Jiewen Jin
Peilei Zhang
Hua Yan
Haichuan Shi
Jian Zhao
Publikationsdatum: 29.10.2021
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 3/2022
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-021-06362-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2022

Multi-parameter Optimization of Laser Cladding 15-5PH Using TOPSIS-GRA Based on Combined Weighting Method

Effects of Solution Heat Treatment Temperatures on Microstructures and Mechanical Properties of SP-700 Ti Alloys

Effect of Al Content on the Thermal Conductivity and Corrosion Resistance of Die Steel

Comparative Study of Solution Heat Treatment of IN738LC Superalloy in Conventional Conditions and Salt Bath

Characterizing Microstructure Evolution and Kinetics of a Spray Formed Ultrahigh Strength Aluminum Alloy during Isothermal Aging

Effect of Tempering Temperature on Carbide Precipitation and Mechanical Properties of Marine Atmospheric Corrosion Resistant Steel

Premium Partner

Marktübersichten