nach oben

Rock Mechanics and Rock Engineering

Erschienen in:

15.03.2023 | Original Paper

Performances of Different Abrasive Materials During Swirling Impeller Abrasive Water Jet Drilling of Granite

verfasst von: Huan Li, Zhongwei Huang, Jingbin Li, Kang Cheng, Tianwen Jiang, Chao Xiong

Erschienen in: Rock Mechanics and Rock Engineering | Ausgabe 6/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Swirling impeller abrasive water jet (SAWJ) is a viable alternative for larger-diameter drilling of mining and oil and gas extraction. Abrasive material plays an important role in eco-efficient drilling of SAWJ. Here, we investigate performances of six types of abrasive materials during SAWJ drilling of hard granite. Rock breaking performances and abrasive particles characteristics before and after impact were studied. Besides, reusability, efficiency and economy of different abrasive materials were discussed. The results indicated that SAWJ would create a large-diameter (63–71 mm) hole with a conical bulge on the bottom regardless of the abrasive material used in it. Abrasive particles size distribution and shape factor before and after impacting with granite had slight changes. Moreover, median diameter of the particles and shape factor were used for estimating the reusability of the abrasive particles after impacting with granite, and the results indicated that all the abrasive materials had excellent reusability. Besides, the efficiency and economy analyses showed that the garnet abrasive had the best rock breaking performance. Therefore, we recommend garnet as the abrasive during swirling impeller abrasive water jet drilling of granite.

Vorheriger Artikel Stress-Water Coupling Effects on Failure of Sandstone Based on Real-Time CT Technology

Nächster Artikel Performance of Conventional and Energy-Absorbing Self-Drilling Hollow Core Rockbolts Under Controlled Laboratory Conditions

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Alaloul WS, Musarat MA, Shawn LE, Al-Yacouby AM, Toloue I, Rafiq W, Farooq W (2021) Multi-nozzle abrasive water jet for oil and gas platforms decommissioning: a review. Civ Eng Arch 9(6):2062–2076. https://doi.org/10.13189/cea.2021.090634CrossRef

Anu Kuttan A, Rajesh R, Dev Anand M (2021) Abrasive water jet machining techniques and parameters: a state of the art, open issue challenges and research directions. J Braz Soc Mech Sci Eng 43(4):1–14. https://doi.org/10.1007/s40430-021-02898-6CrossRef

Aydin G, Karakurt I, Aydiner K (2013) Prediction of the cut depth of granitic rocks machined by abrasive waterjet (AWJ). Rock Mech Rock Eng 46(5):1223–1235. https://doi.org/10.1007/s00603-012-0307-1CrossRef

Babu MK, Chetty OK (2003) A study on recycling of abrasives in abrasive water jet machining. Wear 254(7–8):763–773. https://doi.org/10.1016/S0043-1648(03)00256-4CrossRef

Barton N (1978) Suggested methods for the quantitative description of discontinuities in rock masses: international society for rock mechanics. Int J Rock Mech Min Sci Geomech Abstr 15:319–368

Bhattacharyya B, Doloi B (2020) Machining processes utilizing mechanical energy. Modern Mach Technol. https://doi.org/10.1016/B978-0-12-812894-7.00003-7CrossRef

Cha YH, Oh T-M, Joo G-W, Cho G-C (2021) Performance and reuse of steel shot in abrasive waterjet cutting of granite. Rock Mech Rock Eng 54(3):1551–1563. https://doi.org/10.1007/s00603-020-02332-8CrossRef

Dong YZ, Liu WW, Zhang H, Zhang HC (2014) On-line recycling of abrasives in abrasive water jet cleaning. Proc CIRP 15:278–282. https://doi.org/10.1016/j.procir.2014.06.045CrossRef

Engin IC (2012) A correlation for predicting the abrasive water jet cutting depth for natural stones. S Afr J Sci 108(9):1–11

Fowler G, Pashby I, Shipway P (2009) The effect of particle hardness and shape when abrasive water jet milling titanium alloy Ti₆Al₄V. Wear 266(7–8):613–620. https://doi.org/10.1016/j.wear.2008.06.013CrossRef

Fu BW, Zhang S, Liu SH, Zhu ZL (2021) Drilling performance analysis of a new type of direct-rotating mixed-jet nozzle. J Pet Sci Eng 200:108302. https://doi.org/10.1016/j.petrol.2020.108302CrossRef

Fujimura F, Kamiya K, Fujiwara K, Shoji N, Shimizu K (2013) Repeatability and reproducibility of measurements using a NT-530P noncontact tono/pachymeter and correlation of central corneal thickness with intraocular pressure. BioMed Res Int. https://doi.org/10.1155/2013/370592CrossRef

Gent M, Menéndez M, Torno S, Torano J, Schenk A (2012) Experimental evaluation of the physical properties required of abrasives for optimizing waterjet cutting of ductile materials. Wear 284:43–51. https://doi.org/10.1016/j.wear.2012.02.012CrossRef

Hong CY, Yang RY, Huang ZW, Liu W, Chen JX, Cong RC (2021) Experimental investigation on coal-breakage performances by abrasive nitrogen-gas jet with a conical nozzle. Int J Rock Mech Min Sci 142:104781. https://doi.org/10.1016/j.ijrmms.2021.104781CrossRef

Huang F, Zhao ZQ, Li D, Mi JY, Wang RR (2022) Investigation of the breaking manifestations of bedded shale impacted by a high-pressure abrasive water jet. Powder Technol 397:117021. https://doi.org/10.1016/j.powtec.2021.11.065CrossRef

Jianxiang C, Ruiyue Y, Zhongwei H, Gensheng L, Xiaozhou Q, Jingbin L, Xiaoguang W (2022) Detached eddy simulation on the structure of swirling jet flow field. Pet Explor Dev 49(4):806–817

Kamel AH (2017) Radial jet drilling: a technical review. SPE Middle East Oil Gas Show Confe. https://doi.org/10.2118/183740-MSCrossRef

Khan AA, Haque M (2007) Performance of different abrasive materials during abrasive water jet machining of glass. J Mater Process Technol 191(1–3):404–407. https://doi.org/10.1016/j.jmatprotec.2007.03.071CrossRef

Kothari N, Mahajan M, Pooniwala S, Panjwani J (2013) Application of sand jet perforations for multizone fracturing in CBM wells, India. SPE/ICoTA Coil Tub Well Interv Conf Exhib. https://doi.org/10.2118/163913-MSCrossRef

Li G, Huang Z, Li J (2017) Study of the key techniques in radial jet drilling. Pet Drill Tech 45(2):1–9

Li JB, Huang ZW, Zhang GQ, Liu X, Li H (2020) Rock breaking characteristics of the self-rotating multi-orifices nozzle applied to coalbed methane radial jet drilling. Int J Rock Mech Min Sci 136:104483. https://doi.org/10.1016/j.ijrmms.2020.104483CrossRef

Li JB, Dai JC, Huang ZW, Zhang GQ, Liu X, Li H (2021) Rock breaking characteristics of the self-rotating multi-orifice nozzle for sandstone radial jet drilling. Rock Mech Rock Eng 54(11):5603–5615. https://doi.org/10.1007/s00603-021-02567-zCrossRef

Li B, Zhang B, Hu MM, Liu B, Cao WZ, Xu B (2022a) Full-scale linear cutting tests to study the influence of pre-groove depth on rock-cutting performance by TBM disc cutter. Tunnel Undergr Space Technol 122:104366. https://doi.org/10.1016/j.tust.2022a.104366CrossRef

Li H, Huang Z, Li J, Li X, Jiang T, Chen J (2022b) Rock breaking characteristics by swirling impeller abrasive water jet (SAWJ) on granite. Int J Rock Mech Min Sci 159:105230. https://doi.org/10.1016/j.ijrmms.2022b.105230CrossRef

Liu SY, Zhou FY, Li HS, Chen YQ, Wang FC, Guo CW (2020) Experimental investigation of hard rock breaking using a conical pick assisted by abrasive water jet. Rock Mech Rock Eng 53(9):4221–4230. https://doi.org/10.1007/s00603-020-02168-2CrossRef

Luo B, Zhang J, Bao X, Liu HG, Li L (2020) The effect of granularity on surface roughness and contact angle in wood sanding process. Measurement 165:108133. https://doi.org/10.1016/j.measurement.2020.108133CrossRef

Ma GR, Li JB, Li H, Zhang J, Chang WJ (2021a) Study on pore forming characteristics of carbonate rock broken by swirling abrasive water jet. Fluid Mach 49(11):12–17. https://doi.org/10.3969/j.issn.1005-0329.2021.11.003CrossRef

Ma QS, Lin J, Yang KN, Xie H, Guo CW (2021b) Experimental study on abrasive recycling in cutting with abrasive suspension water jet. Int J Adv Manuf Technol 114(3):969–979. https://doi.org/10.1007/s00170-021-06921-xCrossRef

Madhu S, Balasubramanian M (2018) Impact of nozzle design on surface roughness of abrasive jet machined glass fibre reinforced polymer composites. SILICON 10(6):2453–2462. https://doi.org/10.1007/s12633-018-9777-4CrossRef

Melentiev R, Fang FZ (2018) Recent advances and challenges of abrasive jet machining. CIRP J Manuf Sci Technol 22:1–20. https://doi.org/10.1016/j.cirpj.2018.06.001CrossRef

Moiseenkov A, Al Hadhrami A, Shabibi H, Smirnov D, Busaidi Y, Nabhani Y, Nunez A, Alias Z, Al-Jabri A (2019) Abrasive jet perforation: successful deployment of novel technique to enhance production and promote savings. Abu Dhabi Int Pet Exhib Conf. https://doi.org/10.2118/197720-MSCrossRef

Natarajan Y, Murugesan PK, Mohan M, Khan SALA (2020) Abrasive water jet machining process: a state of art of review. J Manuf Process 49:271–322. https://doi.org/10.1016/j.jmapro.2019.11.030CrossRef

Oh T-M, Cho G-C (2014) Characterization of effective parameters in abrasive waterjet rock cutting. Rock Mech Rock Eng 47(2):745–756. https://doi.org/10.1007/s00603-013-0434-3CrossRef

Oh T-M, Cho G-C (2016) Rock cutting depth model based on kinetic energy of abrasive waterjet. Rock Mech Rock Eng 49(3):1059–1072. https://doi.org/10.1007/s00603-015-0778-yCrossRef

Oh T-M, Joo G-W, Cho G-C (2019) Effect of abrasive feed rate on rock cutting performance of abrasive waterjet. Rock Mech Rock Eng 52(9):3431–3442. https://doi.org/10.1007/s00603-019-01784-xCrossRef

Pryseley A, Mintiens K, Knapen K, Van der Stede Y, Molenberghs G (2010) Estimating precision, repeatability, and reproducibility from Gaussian and non-Gaussian data: a mixed models approach. J Appl Stat 37(10):1729–1747. https://doi.org/10.1080/02664760903150706CrossRef

Qu H, Wu XG, Huang PP, Tang SM, Wang R, Hu YS (2022) Acoustic emission and failure characteristics of shales with different brittleness under AWJ impingement. Rock Mech Rock Eng 55(4):1871–1886. https://doi.org/10.1007/s00603-021-02765-9CrossRef

Ramesh P, Mani K (2022) Prediction of surface roughness using machine learning approach for abrasive waterjet milling of alumina ceramic. Int J Adv Manuf Technol 119(1):503–516. https://doi.org/10.1007/s00170-021-08052-9CrossRef

Ruiyue Y, Zhongwei H, Gensheng L, Jianxiang C, Haitao W, Haitao W (2022) Feasibility Investigation of Hydraulic jet multistage cavity completion in coalbed methane horizontal wells. J China Coal Soc. https://doi.org/10.13225/j.cnki.jccs.SS22.0665CrossRef

Sabarinathan P, Annamalai V, Rajkumar K (2020) Sustainable application of grinding wheel waste as abrasive for abrasive water jet machining process. J Clean Prod 261:121225. https://doi.org/10.1016/j.jclepro.2020.121225CrossRef

Su D, Wang X, Yang HW, Hong CY (2019) Roughness analysis of general-shape particles, from 2D closed outlines to 3D closed surfaces. Powder Technol 356:423–438. https://doi.org/10.1016/j.powtec.2019.08.042CrossRef

Tripathi R, Hloch S, Chattopadhyaya S, Klichová D, Ščučka J, Das AK (2020) Application of the pulsating and continous water jet for granite erosion. Int J Rock Mech Min Sci 126:104209. https://doi.org/10.1016/j.ijrmms.2020.104209CrossRef

Xiong C, Huang ZW, Shi HZ, Shi XX, Zhang B, Chalaturnyk R (2022) Experimental investigation into mixed tool cutting of granite with stinger PDC cutters and conventional PDC cutters. Rock Mech Rock Eng 55(2):813–835. https://doi.org/10.1007/s00603-021-02680-zCrossRef

Yang YY, Shen ZH, Wang RH, Zhou WD (1999) Experimental study on rotary abrasive jet drilling. Pet Drill Tech 27(4):4–7

Yang RY, Hong CY, Huang ZW, Song XZ, Zhang SK, Wen HT (2019) Coal breakage using abrasive liquid nitrogen jet and its implications for coalbed methane recovery. Appl Energy 253:113485. https://doi.org/10.1016/j.apenergy.2019.113485CrossRef

Yu Y, Sun TX, Yuan YM, Gao H, Wang XP (2020) Experimental investigation into the effect of abrasive process parameters on the cutting performance for abrasive waterjet technology: a case study. Int J Adv Manuf Technol 107(5):2757–2765. https://doi.org/10.1007/s00170-020-05183-3CrossRef

Yuan QL, Chen X, Wen DH (2022) Constrained abrasive jet polishing with a tangentially aligned nozzle shroud. Int J Adv Manuf Technol 120(5):4191–4205. https://doi.org/10.1007/s00170-022-08988-6CrossRef

Zhang DQ, Li JB, Hu X, Liu X, Cheng K (2022) Flow field simulation of swirling abrasive jet nozzle for hard rock breaking. Geofluids. https://doi.org/10.1155/2022/4681189CrossRef

Zhou AZ, Wang RH, Li DM, Zheng K, Zhou WD, Li LP (2012) Experimental study on casing window using swirling abrasive water jet. Drill Prod Technol 35(03):28–30

Titel: Performances of Different Abrasive Materials During Swirling Impeller Abrasive Water Jet Drilling of Granite
verfasst von: Huan Li
Zhongwei Huang
Jingbin Li
Kang Cheng
Tianwen Jiang
Chao Xiong
Publikationsdatum: 15.03.2023
Verlag: Springer Vienna
Erschienen in: Rock Mechanics and Rock Engineering / Ausgabe 6/2023
Print ISSN: 0723-2632
Elektronische ISSN: 1434-453X
DOI: https://doi.org/10.1007/s00603-023-03222-5

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2023

Determining Method of Tensile Strength of Rock Based on Friction Characteristics in the Drilling Process

An Analytical Model to Predict the Survival Probability of Irregular Brittle Rocks in Rockfall under collinear impact

Spatial Distribution of Rock Disturbance in Assessment of Roof Stability in Flat-Ceiling Cavities

A Hybrid Methodology of Rock Support Design for Poor Ground Conditions in Hard Rock Tunnelling

Micro-scale Fracturing Mechanisms in Rocks During Tensile Failure

Analytical Solutions for the Characteristic Size Distribution of the Elliptical Model in Fractured Rock Mass