nach oben

Journal of Materials Engineering and Performance

Erschienen in:

06.08.2021

Physico-Chemical Behavior and Thermo-Optical and Mechanical Properties of Glassy Carbon Up to 2100 K Under Low-Energy Proton and Vacuum Ultraviolet Irradiations

verfasst von: Marianne Balat-Pichelin, Julien Eck, Jean-Louis Sans, Hervé Glénat

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 11/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In the frame of mission for the Sun approach, to understand the effects of the heating of the solar corona and the acceleration of the solar winds, research was carried out to study the behavior of glassy carbon that can be used for the heat shield. The physicochemical behavior of glassy carbon from 1600 up to 2100 K with or without proton bombardment and VUV irradiation was studied together with the measurement of the thermal optical properties, the ratio of the solar absorptivity to the total hemispherical emissivity conditioning the thermal equilibrium of the heat shield. Experimental results obtained on massive glassy carbon samples are presented through mass spectrometry, mass loss rate and microstructural characterization (XRD, SEM…), mechanical and thermo-optical properties. Finally, the synergistic effect of high temperature, protons and VUV radiation has a low impact on this material.

Vorheriger Artikel Recrystallization Behavior and Texture Evolution of Magnesium Alloy Bending Products under Staggered Extrusion

Nächster Artikel Effect of Milling Parameters on the Stability of the Passive Film of AISI 304 Stainless Steel

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

V. Krasnoselskikh, B.T. Tsururani, M. Velli, M. Maksimovic, M. Balikhin, T. Dudok de Wit, M. Kretzschmar, and the ICARUS team, ICARUS Mission, Next Step of Coronal Exploration After Solar Orbiter and Solar Probe Plus, Geophys. Res. Abst. 19 (2017) EGU2017-3971-3

D.J. Mc Comas, L.W. Acton, M. Balat-Pichelin, V. Bothmer, R.B. Jr Dirling, W.C. Feldman, et al., Solar Probe: Report of the Science and Technology Definition Team, NASA/TM-2005-212786 (2005)

D.J. Mc Comas, L.W. Acton, M. Balat-Pichelin, V. Bothmer, R.B. Jr Dirling, W.C. Feldman, et al., Solar Probe Plus: Report of the Science and Technology Definition Team, NASA/TM-2008-214161 (2008)

G. Vitali, M. Rossi, M.L. Terranova and V. Sessa, Laser-Induced Structural Modifications of Glassy Carbon Surfaces, J. Appl. Phys., 1995, 77, p 4307–4311.CrossRef

M.G. Rodrigues, N.C. da Cruz, E.C. Rangel, R.L. Zimmerman, D. Ila, D.B. Poker and D.K. Hensley, Effects of Ion Beam on Nanoindentation Characteristics of Glassy Polymeric Carbon Surface, Surf. Coat. Technol., 2005, 196, p 251–256. https://doi.org/10.1016/j.surfcoat.2004.08.094CrossRef

O.S. Odutemowo, J.B. Malherbe, L. Prinsloo, D.F. Langa and E. Wendler, High Temperature Annealing Studies of Strontium Ion Implanted Glassy Carbon, Nucl. Intrum. Methods Phys. Res. B, 2016, 371, p 332–335. https://doi.org/10.1016/j.nimb.2015.10.054CrossRef

J.B. Malherbe, O.S. Odutemowo, E.G. Njoroge, D.F. Langa, T.T. Hlatshwayo and C.C. Theron, Ion Bombardment of Glassy Carbon, Vacuum, 2018, 149, p 19–22. https://doi.org/10.1016/j.vacuum.2017.11.006CrossRef

N.N. Andrianova, A.M. Borisov, V.A. Kazakov, A.V. Makunin, E.S. Mashkova and M.A. Ovchinnikov, Modification of the Nanoglobular Structure of Glassy Carbon by Heat Treatment and Ion Irradition, J. Surf. Invest. X-ray Synchrotron Neutron Tech., 2019, 13, p 802–808. https://doi.org/10.1134/S1027451019050033CrossRef

N.N. Andrianova, A.M. Borisov, V.A. Kazakov, A.V. Makunin, E.S. Mashkova and M.A. Ovchinnikov, Dynamic Annealing Effects Under High-Fluence Ion Irradiation of Glassy Carbon, Vacuum, 2020, 179, 109469. https://doi.org/10.1016/j.vacuum.2020.109469CrossRef

10.

S. Hirsch and P. Jung, Dimensional Changes and Creep of Glassy Carbon Under Proton Irradiation, Carbon, 1998, 36, p 153–156.CrossRef

11.

A. Güttler, Th. Zecho and J. Küppers, Interaction of H (D) Atoms with Surfaces of Glassy Carbon: Adsorption, Abstraction and Etching, Carbon, 2004, 42, p 337–343. https://doi.org/10.1016/j.carbon.2003.11.007CrossRef

12.

M.L. Terranova, V. Sessa and M. Rossi, Tree-Like Carbon Nanostructures Generated by the Action of Atomic Hydrogen on Glassy Carbon, Chem. Phys. Lett., 2001, 336, p 405–409.CrossRef

13.

Z. Jovanovic, A. Kalijadis, D. Vasiljevic-Radovic, M. Eric, M. Lausevic, S. Mentus and Z. Lausevic, Modification of Glassy Carbon Properties Under Low Energy Proton Irradiation, Carbon, 2011, 49, p 3737–3746. https://doi.org/10.1016/j.carbon.2011.05.006CrossRef

14.

Z. Jovanovic, A. Kalijadis, M. Lausevic and Z. Lausevic, The Evolution of Hydrogen from Proton Irradiated Glassy Carbon, Nucl. Intrum. Methods Phys. Res. B, 2011, 269, p 2578–2583. https://doi.org/10.1016/j.nimb.2011.07.014CrossRef

15.

J. Eck and M. Balat-Pichelin, Study of Carbon Erosion Under Ion Bombardment at High Temperature: Application to the Thermal Protection System of Solar Probe Plus, Vacuum, 2010, 85, p 380–389. https://doi.org/10.1016/j.vacuum.2010.07.012CrossRef

16.

J. Eck, J.L. Sans and M. Balat-Pichelin, Experimental Study of Carbon Materials Behavior Under High Temperature and VUV Radiation: Application to Solar Probe Plus Heat Shield, Appl. Surf. Sci., 2011, 257, p 3196–3204. https://doi.org/10.1016/j.apsusc.2010.10.139CrossRef

17.

T. Paulmier, M. Balat-Pichelin, D. Le Quéau, R. Berjoan and J.F. Robert, Physico-Chemical Behavior of Carbon Materials Under High Temperature and Ion Irradiation, Appl. Surf. Sci., 2001, 180, p 227–245.CrossRef

18.

T. Paulmier, M. Balat-Pichelin and D. Le Quéau, Structural Modifications of Carbon-Carbon Composites Under High Temperature and Ion Irradiation, Appl. Surf. Sci., 2005, 243, p 376–393. https://doi.org/10.1016/j.apsusc.2004.09.106CrossRef

19.

J.P. Biersack and L.G. Haggmark, A Monte-Carlo Computer Program for the Transport of Energetic Ions in Amorphous Target, Nucl. Instrum. Methods Phys. Res., 1980, 174, p 257–269.CrossRef

20.

J. Roth, E. Vietzke and A.A. Haasz, Erosion of Graphite due to Particle Impact, Suppl. to Nucl. Fusion., 1991, 1, p 63–78.

21.

Sputtering by Particle Bombardment—Experiments and Computer Calculations from Threshold to MeV Energies, R. Behrisch, W. Eckstein (Eds.), Topics in Applied Physics, Springer, Berlin, (2007)

22.

L.A. Pesin, Review: Structure and Properties of Glass-Like Carbon, J. Mater. Sci., 2002, 37, p 1–28.CrossRef

23.

M. Balat-Pichelin, J. Eck and J.L. Sans, Thermal Radiative Properties of Carbon Materials Under High Temperature and Vacuum Ultra-Violet (VUV) Radiation for the Heat Shield of the Solar Probe Plus Mission, Appl. Surf. Sci., 2012, 258, p 2829–2835. https://doi.org/10.1016/j.apsusc.2011.10.142CrossRef

24.

D. Hernandez, J.M. Sans, A. Netchaieff, P. Ridoux and V. Le Sant, Experimental Validation of a Pyroreflectometric Method to Determine the True Temperature on Opaque Surface Without Hampering Reflections, Measurement, 2009, 42, p 836–843. https://doi.org/10.1016/j.measurement.2009.01.012CrossRef

25.

M. Balat-Pichelin, J.F. Robert and J.L. Sans, Emissivity Measurements on Carbon-Carbon Composites at High Temperature Under High Vacuum, Appl. Surf. Sci., 2006, 253, p 778–783. https://doi.org/10.1016/j.apsusc.2006.01.007CrossRef

26.

M. Balat-Pichelin, J. Eck, S. Heurtault and H. Glénat, Experimental Study of Pyrolytic Boron Nitride at High Temperature with and Without Proton and VUV Irradiations, Appl. Surf. Sci., 2014, 314, p 415–425. https://doi.org/10.1016/j.apsusc.2014.07.007CrossRef

27.

E. Brodu, M. Balat-Pichelin, D. de Sousa Meneses and J.L. Sans, Reducing the Temperature of a C/C Composite Heat Shield for Solar Probe Missions with an Optically Selective Semi-Transparent Pyrolytic Boron Nitride (pBN) Coating, Carbon, 2015, 82, p 39–50. https://doi.org/10.1016/j.carbon.2014.10.022CrossRef

28.

M. Sakai, H. Hanyu and M. Inagaki, Indentation-Induced Contact Deformation and Damage of Glasslike Carbon, J. Am. Ceram. Soc., 1995, 78, p 1006–1012. https://doi.org/10.1111/j.1151-2916.1995.tb08429.xCrossRef

29.

R. Garcia and A. San Paulo, Attractive and Repulsive Tip-Sample Interaction Regimes in Tapping-Mode Atomic Force Microscopy, Phys. Rev. B, 1999, 60, p 4961–4967.CrossRef

30.

W.C. Oliver and G.M. Pharr, An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments, J. Mater. Res., 1992, 76, p 1564–1583. https://doi.org/10.1557/JMR.1992.1564CrossRef

31.

J.S. Field and M.V. Swain, The Indentation Characterisation of the Mechanical Properties of Various Carbon Materials: Glassy Carbon, Coke and Pyrolytic Graphite, Carbon, 1996, 34, p 1357–1366.CrossRef

32.

D.L. Joslin and W.C. Oliver, A New Method for Analyzing Data from Continuous Depth-Sensing Micro-Indentation Tests, J. Mater. Res., 1990, 5, p 123–126. https://doi.org/10.1557/jmr.1990.0123CrossRef

33.

T.F. Page, G.M. Pharr, J.C. Hay, W.C. Oliver, B.N. Lucas, E. Herbert and L. Riester, Nanoindentation Characterization of Coated Systems: P/S^2—A New Approach Using the Continuous Stiffness Technique, Mater. Res. Soc. Symp. Proceed., 1998, 522, p 53–64. https://doi.org/10.1557/PROC-522-53CrossRef

34.

T.B. Shiell, S. Wong, W. Yang, C.A. Tanner, B. Haberl, R.G. Elliman, D.R. Mc Kennzie, D.G. Mc Culloch and J.E. Bradby, The Composition, Structure and Properties of Four Different Glassy Carbons, J. Non-Cryst. Solids, 2019, 522, p 119561. https://doi.org/10.1016/j.jnoncrysol.2019.119561CrossRef

35.

I.N. Sneddon, The Relation Between Load and Penetration in the Axisymmetric Bousssinesq Problem for a Punch of Arbitrary Profile, Int. J. Eng. Sci., 1965, 3, p 47–57. CrossRef

36.

J.L. Loubet, J.M. Georges, J. Meille, In Microindentation Techniques in Materials Science and Engineering, edited by P.J. Blau and B.R. Lawn (American Society for Testing and Materials, Philadelphia), pp. 72-89 (1986)

37.

S.V. Hainsworth, H.W. Chandler and T.F. Page, Analysis of Nanoindentation Load-Displacement Loading Curves, J. Mater. Res., 1996, 11, p 1987–1995. https://doi.org/10.1557/jmr.1996.0250CrossRef

38.

T.A. Venkatesh, K.J. Van Vliet, A.E. Giannakopolous and S. Suresh, Determination of Elasto-Plastic Properties by Instrumented Sharp Indentation: Guidelines for Property Extraction, Scripta Mater., 2000, 42, p 833–839. https://doi.org/10.1016/s1359-6462(00)00311-0CrossRef

Titel: Physico-Chemical Behavior and Thermo-Optical and Mechanical Properties of Glassy Carbon Up to 2100 K Under Low-Energy Proton and Vacuum Ultraviolet Irradiations
verfasst von: Marianne Balat-Pichelin
Julien Eck
Jean-Louis Sans
Hervé Glénat
Publikationsdatum: 06.08.2021
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 11/2021
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-021-06054-y

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2021

Mechanical Behaviors of Cold-Rolled and Subsequently Annealed Fe35Ni35Cr20Mn10 High-Entropy Alloy

A Combined Experimental and Modeling Approach to Investigate the Performance of Joint Between AZ31 Magnesium and Uncoated DP590 Steel Using Friction Stir-Assisted Scribe Technique

Dynamic Stress and Fatigue Life Analysis of a Coal Plow Bit

Effect of Specimen Orientation on the Mechanical Performance of Diffusion Bonded 316 Stainless Steel for Hybrid Printed Circuit Heat Exchangers

Damage and Failure Analysis of Fiber-Reinforced Ceramic-Matrix Composites with Different Fiber Preforms Under Stochastic Fatigue Load Spectrum

Investigation into the Evolution of Microstructure and Mechanical Properties of Compacted Graphite Iron under Elevated Temperature

Premium Partner

Marktübersichten