nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

17.02.2020 | ORIGINAL ARTICLE

Prediction of different design conditions on comprehensive performance of hydrostatic slide and experimental verification

verfasst von: Wanjiao Dong, Beizhi Li, Weicheng Guo, Qinzhi Zhou

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 1-2/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Performance of the hydrostatic slide is influenced by design parameters, and changes in some parameters can effectively improve the comprehensive performance of the hydrostatic slide. In this paper, a new model is established to predict the comprehensive performance of hydrostatic slide accurately under different design parameters. The stiffness, response time, and temperature rise are considered the evaluation index of the static, dynamics, and thermal performance of the hydrostatic slide. The model is developed based on the relationship between slide performance and design parameters, such as oil film thickness, hydraulic system parameters, and restrictor parameters, which is explicit and easily acquired in practical application. The experiment results agree well with the results calculated by the optimization model. By comparison, the performance of hydrostatic slide designed by the optimized parameters is much better than that of the slide designed by the original parameters. The model provides some suggestions for design process in the view of comprehensive performance.

Vorheriger Artikel Pose-dependent modal behavior of a milling robot in service

Nächster Artikel Locating method and motion stroke design of flexible assembly tooling for multiple aircraft components

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

He G, Sun G, Zhang H, Huang C, Zhang D (2017) Hierarchical error model to estimate motion error of linear motion bearing table. Int J Adv Manuf Technol 93(5–8):1915–1927. https://doi.org/10.1007/s00170-017-0635-0 CrossRef

Jiang X, Kong X, Zhang Z, Wu Z, Ding Z, Guo M (2020) Modeling the effects of undeformed chip volume (UCV) on residual stresses during the milling of curved thin-walled parts. Int J Mech Sci 167:105162. https://doi.org/10.1016/j.ijmecsci.2019.105162 CrossRef

Zhang X, Wen D, Shi Z, Li S, Kang Z, Jiang J, Zhang Z (2020) Grinding performance improvement of laser micro-structured silicon nitride ceramics by laser macro-structured diamond wheels. Ceram Int 46(1):795–802. https://doi.org/10.1016/j.ceramint.2019.09.034 CrossRef

Wu C, Pang J, Li B, Liang SY (2019) High-speed grinding of HIP-SiC ceramics on transformation of microscopic features. Int J Adv Manuf Technol 102(5–8):1913–1921. https://doi.org/10.1007/s00170-018-03226-4 CrossRef

Ding Z, Sun G, Jiang X, Guo M, Liang SY (2019) Predictive modeling of microgrinding force incorporating phase transformation effects. J Manuf Sci Eng 141(8). https://doi.org/10.1115/1.4043839

Salem F, El-Sherbiny M, El-Hefnawy N (1983) Optimum design of hydrostatic journal bearings. Part II: minimum power losses. J Eng Appl Sci 2:171–184

El-Sherbiny M, Salem F, El-Hefnawy N (1984) Optimum design of hydrostatic journal bearings part I: maximum load capacity. Tribol Int 17(3):155–161CrossRef

Sharma SC, Rajput AK (2013) Effect of geometric imperfections of journal on the performance of micropolar lubricated 4-pocket hybrid journal bearing. Tribol Int 60:156–168. https://doi.org/10.1016/j.triboint.2012.10.017 CrossRef

Yadav SK, Sharma SC (2014) Performance of hydrostatic tilted thrust pad bearings of various recess shapes operating with non-Newtonian lubricant. Finite Elem Anal Des 87:43–55. https://doi.org/10.1016/j.finel.2014.04.009 CrossRef

10.

Shao J-P, Liu G-D, Yu X-D, Zhang Y-Q, Meng X-L, Jiang H (2018) Effect of recess depth on lubrication performance of annular recess hydrostatic thrust bearing by constant rate flow. Ind Lubr Tribol 70(1):68–75CrossRef

11.

Dwivedi VK, Chand S, Pandey KN (2013) Effect of number and size of recess on the performance of hybrid (hydrostatic/hydrodynamic) journal bearing. Procedia Eng 51:810–817. https://doi.org/10.1016/j.proeng.2013.01.116 CrossRef

12.

Zhang P, Chen Y, Zhang C, Zha J, Wang T (2018) Influence of geometric errors of guide rails and table on motion errors of hydrostatic guideways under quasi-static condition. Int J Mach Tools Manuf 125:55–67. https://doi.org/10.1016/j.ijmachtools.2017.10.006 CrossRef

13.

Onat Ekinci T, Mayer JRR, Cloutier GM (2009) Investigation of accuracy of aerostatic guideways. Int J Mach Tools Manuf 49(6):478–487. https://doi.org/10.1016/j.ijmachtools.2009.01.001 CrossRef

14.

Luo X, Ye T, Xin T, Hu S, Hong M, Gu M, Lai Z, Qiao Z, Zhang P, Wang B, Wu Y (2016) The effect of structural coefficient on stiffness and deformation of hydrostatic guideway. 9685:968509. https://doi.org/10.1117/12.2242284

15.

Sawano H, Nakamura Y, Yoshioka H, Shinno H (2015) High performance hydrostatic bearing using a variable inherent restrictor with a thin metal plate. Precis Eng 41:78–85. https://doi.org/10.1016/j.precisioneng.2015.02.001 CrossRef

16.

Liu Z, Wang Y, Cai L, Zhao Y, Cheng Q, Dong X (2017) A review of hydrostatic bearing system: researches and applications. Adv Mech Eng 9(10):168781401773053. https://doi.org/10.1177/1687814017730536 CrossRef

17.

Chen NNS, Ho YS (1977) Computer-aided design of hydrostatic journal bearings including shaft bending effect. Tribol Int 10(4):8. https://doi.org/10.1016/0301-679x(77)90024-x CrossRef

18.

Su H, Lu L, Liang Y, Zhang Q, Sun Y (2014) Thermal analysis of the hydrostatic spindle system by the finite volume element method. Int J Adv Manuf Technol 71(9–12):1949–1959. https://doi.org/10.1007/s00170-014-5627-8 CrossRef

19.

Xu E, Wang Y, Wu J, Xu S, Wang Y, Wang S (2016) Investigations on the applicability of hydrostatic bearing technology in a rotary energy recovery device through CFD simulation and validating experiment. Desalination 383:60–67. https://doi.org/10.1016/j.desal.2016.01.018 CrossRef

20.

Liu Z, Wang Y, Cai L, Cheng Q, Zhang H (2015) Design and manufacturing model of customized hydrostatic bearing system based on cloud and big data technology. Int J Adv Manuf Technol 84(1–4):261–273. https://doi.org/10.1007/s00170-015-8066-2 CrossRef

21.

Liu C, Hu J (2018) A magnetorheological hydrostatic guideway system for machining vibration control. J Braz Soc Mech Sci Eng 41(1):1–12. https://doi.org/10.1007/s40430-018-1525-6 MathSciNetCrossRef

22.

Gao Y, Villecco F, Li M, Song W (2017) Multi-scale permutation entropy based on improved LMD and HMM for rolling bearing diagnosis. Entropy 19(4):176. https://doi.org/10.3390/e19040176 CrossRef

23.

Song W, Cattani C, Chi C-H (2020) MultiFractional Brownian motion and quantum-behaved particle swarm optimization for short term power load forecasting: an integrated approach. Complexity. https://doi.org/10.1155/2020/8543131 CrossRef

24.

Liu C, Hu J, Hu Q (2018) Preview control of hydrostatic guideway for ultraprecision CNC machine tools. Iran J Sci Technol Trans Mech Eng 43(S1):749–759. https://doi.org/10.1007/s40997-018-0192-7 MathSciNetCrossRef

25.

Yang S, Zhao P, Xu Y, Sun L, Wu P, Long X, Jiang Z (2015) Hydrostatic worktable performance of an ultra-precision optical aspheric machine tool. Procedia CIRP 27:187–191. https://doi.org/10.1016/j.procir.2015.04.064 CrossRef

26.

Deb K, Jain H (2014) An evolutionary many-objective optimization algorithm using reference-point-based nondominated sorting approach, part I: solving problems with box constraints. IEEE Trans Evol Comput 18(4):577–601. https://doi.org/10.1109/TEVC.2013.2281535 CrossRef

27.

Alvarado-Iniesta A, Cuate O, Schütze O (2019) Multi-objective and many objective design of plastic injection molding process. Int J Adv Manuf Technol 102(9–12):3165–3180. https://doi.org/10.1007/s00170-019-03432-8 CrossRef

28.

Nguyen DN, Dao T-P, Chau NL, Dang VA (2019) Hybrid approach of finite element method, Kigring metamodel, and multiobjective genetic algorithm for computational optimization of a flexure elbow joint for upper-limb assistive device. Complexity 2019:1–13. https://doi.org/10.1155/2019/3231914 CrossRef

29.

Chau NL, Le HG, Dao T-P, Dang VA (2019) Design and optimization for a new compliant planar spring of upper limb assistive device using hybrid approach of RSM–FEM and MOGA. Arab J Sci Eng 44(9):7441–7456. https://doi.org/10.1007/s13369-019-03795-w CrossRef

30.

Jain H, Deb K (2013) An evolutionary many-objective optimization algorithm using reference-point based nondominated sorting approach, part II: handling constraints and extending to an adaptive approach. IEEE Trans Evol Comput 18(4):602–622CrossRef

31.

Das I, Dennis JE (1996) Normal-boundary intersection: a new method for generating the Pareto surface in nonlinear multicriteria optimization problems. SIAM J Optim 8(3):631–657MathSciNetCrossRef

32.

Dong W, Li B, Guo W, Zhou Q (2019) Deformation analysis of hydrostatic guideways based on the cantilever plate bending calculation method. Tribology Transactions:1–13. doi:https://doi.org/10.1080/10402004.2019.1669755 CrossRef

Titel: Prediction of different design conditions on comprehensive performance of hydrostatic slide and experimental verification
verfasst von: Wanjiao Dong
Beizhi Li
Weicheng Guo
Qinzhi Zhou
Publikationsdatum: 17.02.2020
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 1-2/2020
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-020-05036-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1-2/2020

Accurate and efficient stability prediction for milling operations using the Legendre-Chebyshev-based method

Experimental investigation on the machining characteristics of fixed-free abrasive combined wire sawing PV polycrystalline silicon solar cell

Peg-on-hole: mathematical investigation of motion of a peg and of forces of its interaction with a vertically fixed hole during their alignment with a three-point contact

Experimental study on tool wear in ultrasonic vibration–assisted milling of C/SiC composites

Effect of ultrasonic vibration on thermal and material flow behavior, microstructure and mechanical properties of friction stir welded Al/Cu joints

Micro-milling force modeling with tool wear and runout effect by spatial analytic geometry

Premium Partner

Marktübersichten