nach oben

Polymer Bulletin

Erschienen in:

05.06.2018 | Original Paper

Properties and characterization of carboxymethyl cellulose/halloysite nanotube bio-nanocomposite films: Effect of sodium dodecyl sulfate

verfasst von: Kathiravan Suppiah, Pei Leng Teh, Salmah Husseinsyah, Rozyanty Rahman

Erschienen in: Polymer Bulletin | Ausgabe 1/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, carboxymethyl cellulose/halloysite nanotube (CMC/HNT) bio-nanocomposite films were prepared by solution casting method. The effects of HNT content and chemical modification using sodium dodecyl sulfate (SDS) on the mechanical, morphological and thermal properties of CMC/HNT bio-nanocomposite films were analyzed. Fourier transmission infrared proved the chemical modification of HNT using SDS was successful. Increasing in HNT content had increased the tensile strength at optimum of 10 wt%. The modulus of elasticity and elongation at break were also increased. The SDS-treated bio-nanocomposites possessed higher mechanical properties compared to untreated bio-nanocomposites. The improvement of dispersion and interfacial interaction of HNT in CMC matrix were observed by field emission scanning electron microscopy images. For untreated samples, the XRD results showed that the peak intensity correlated with crystallinity increased and also increased the basal spacing at 10 wt% of HNT in the bio-nanocomposites. The SDS-treated bio-nanocomposites further increased the peaks intensity and the basal spacing compared to untreated bio-nanocomposites. Meanwhile, the moisture content of SDS-treated bio-nanocomposites is much lower compared to the untreated bio-nanocomposites. The thermal stability of CMC/HNT bio-nanocomposites increased with increasing HNT filler content. The SDS-treated bio-nanocomposites had higher thermal stability compared to untreated bio-nanocomposites.

Vorheriger Artikel An approximate analytical approach to estimate the diffusivity of toxic chemicals in polymer barrier materials from the time evolution of sessile drop profiles

Nächster Artikel Synthesis and studies on phosphazene core-based POSS-reinforced polyimide nanocomposites

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Hambleton A, Voilley A, Debeaufort F (2011) Transport parameters for aroma compounds through i-carrageenan and sodium alginate-based edible films. Food Hydrocoll 25:1128–1133. https://doi.org/10.1016/j.foodhyd.2010.10.010 CrossRef

Saremnezhad S, Azizi MH, Barzegar M, Abbasi S, Ahmadi E (2010) Properties of a new edible film made of faba bean protein isolate. J Agric Sci Technol 13:181–192

Lamanna M, Morales NJ, García NL, Goyanes S (2013) Development and characterization of starch nanoparticles by gamma radiation: potential application as starch matrix filler. Carbohydr Polym 97:90–97. https://doi.org/10.1016/j.carbpol.2013.04.081 CrossRefPubMed

Souza AC, Goto GE, Mainardi JA, Coelho AC, Tadini CC (2013) Cassava starch composite films incorporated with cinnamon essential oil: antimicrobial activity, microstructure, mechanical and barrier properties. LWT Food Sci Technol 54:346–352. https://doi.org/10.1016/j.lwt.2013.06.017 CrossRef

Martins JT, Cerqueira MA, Vicente AA (2012) Influence of α-tocopherol on physicochemical properties of chitosan-based films. Food Hydrocoll 27:220–227. https://doi.org/10.1016/j.foodhyd.2011.06.011 CrossRef

Rubilar JF, Cruz RM, Silva HD, Vicente AA, Khmelinskii I, Vieira MC (2013) Physico-mechanical properties of chitosan films with carvacrol and grape seed extract. J Food Eng 115:466–474. https://doi.org/10.1016/j.jfoodeng.2012.07.009 CrossRef

De Salvi DT, Barud HS, Caiut JM, Messaddeq Y, Ribeiro SJ (2012) Self-supported bacterial cellulose/boehmite organic–inorganic hybrid films. J Sol Gel Sci Technol 63:211–218. https://doi.org/10.1007/s10971-012-2678-x CrossRef

Perotti GF, Tronto J, Bizeto MA, Izumi C, Temperini ML, Lugao AB, Parra DF, Constantino VR (2014) Biopolymer–clay nanocomposites: cassava starch and synthetic clay cast films. J Braz Chem Soc 25:320–330. https://doi.org/10.5935/0103-5053.20130300 CrossRef

Huang H, He P, Hu N, Zeng Y (2003) Electrochemical and electrocatalytic properties of myoglobin and hemoglobin incorporated in carboxymethyl cellulose films. Bioelectrochemistry 61:29–38. https://doi.org/10.1016/S1567-5394(03)00057-4 CrossRefPubMed

10.

Bigucci F, Abruzzo A, Vitali B, Saladini B, Cerchiara T, Gallucci MC, Luppi B (2015) Vaginal inserts based on chitosan and carboxymethylcellulose complexes for local delivery of chlorhexidine: preparation, characterization and antimicrobial activity. Int J Pharm 478:456–463. https://doi.org/10.1016/j.ijpharm.2014.12.008 CrossRefPubMed

11.

García A, Leonardi D, Piccirilli GN, Mamprin ME, Olivieri AC, Lamas MC (2015) Spray drying formulation of albendazole microspheres by experimental design. In vitro–in vivo studies. Drug Dev Ind Pharm 41:244–252. https://doi.org/10.3109/03639045.2013.858737 CrossRefPubMed

12.

Su JF, Huang Z, Yuan XY, Wang XY, Li M (2010) Structure and properties of carboxymethyl cellulose/soy protein isolate blend edible films crosslinked by Maillard reactions. Carbohydr Polym 79:145–153. https://doi.org/10.1016/j.carbpol.2009.07.035 CrossRef

13.

Arnon H, Zaitsev Y, Porat R, Poverenov E (2014) Effects of carboxymethyl cellulose and chitosan bilayer edible coating on postharvest quality of citrus fruit. Postharvest Biol Technol 87:21–26. https://doi.org/10.1016/j.postharvbio.2013.08.007 CrossRef

14.

Reddy MM, Vivekanandhan S, Misra M, Bhatia SK, Mohanty AK (2013) Biobased plastics and bionanocomposites: current status and future opportunities. Prog Polym Sci 38:1653–1689. https://doi.org/10.1016/j.progpolymsci.2013.05.006 CrossRef

15.

Khan MU, Reddy KR, Snguanwongchai T, Haque E, Gomes VG (2016) Polymer brush synthesis on surface modified carbon nanotubes via in situ emulsion polymerization. Colloid Polym Sci 294:1599–1610. https://doi.org/10.1007/s00396-016-3922-7 CrossRef

16.

Reddy KR, Jeong HM, Lee Y, Raghu AV (2010) Synthesis of MWCNTs-core/thiophene polymer-sheath composite nanocables by a cationic surfactant-assisted chemical oxidative polymerization and their structural properties. J Polym Sci A 48:1477–1484. https://doi.org/10.1002/pola.23883 CrossRef

17.

Reddy KR, Sin BC, Ryu KS, Noh J, Lee Y (2009) In situ self-organization of carbon black–polyaniline composites from nanospheres to nanorods: synthesis, morphology, structure and electrical conductivity. Synth Metals 159:1934–1939. https://doi.org/10.1016/j.synthmet.2009.06.018 CrossRef

18.

Follain N, Alexandre B, Chappey C, Colasse L, Mederic P, Marais S (2016) Barrier properties of polyamide 12/montmorillonite nanocomposites: effect of clay structure and mixing conditions. Compos Sci Technol 136:18–28. https://doi.org/10.1016/j.compscitech.2016.09.023 CrossRef

19.

Son DR, Raghu AV, Reddy KR, Jeong HM (2016) Compatibility of thermally reduced graphene with polyesters. J Macromol Sci B 55:1099–1110. https://doi.org/10.1080/00222348.2016.1242529 CrossRef

20.

Han SJ, Lee HI, Jeong HM, Kim BK, Raghu AV, Reddy KR (2014) Graphene modified lipophilically by stearic acid and its composite with low density polyethylene. J Macromol Sci B 53:1193–1204. https://doi.org/10.1080/00222348.2013.879804 CrossRef

21.

Choi SH, Kim DH, Raghu AV, Reddy KR, Lee HI, Yoon KS, Jeong HM, Kim BK (2012) Properties of graphene/waterborne polyurethane nanocomposites cast from colloidal dispersion mixtures. J Macromol Sci B 51:197–207. https://doi.org/10.1080/00222348.2011.583193 CrossRef

22.

Lee YR, Kim SC, Lee HI, Jeong HM, Raghu AV, Reddy KR, Kim BK (2011) Graphite oxides as effective fire retardants of epoxy resin. Macromol Res 19:66–71. https://doi.org/10.1007/s13233-011-0106-7 CrossRef

23.

Reddy KR, Park W, Sin BC, Noh J, Lee Y (2009) Synthesis of electrically conductive and superparamagnetic monodispersed iron oxide–conjugated polymer composite nanoparticles by in situ chemical oxidative polymerization. J Colloid Interface Sci 335:34–39. https://doi.org/10.1016/j.jcis.2009.02.068 CrossRefPubMed

24.

Bitinis N, Fortunati E, Verdejo R, Bras J, Kenny JM, Torre L, Lopez-Manchado MA (2013) Poly (lactic acid)/natural rubber/cellulose nanocrystal bionanocomposites. Part II: properties evaluation. Carbohydr Polym 96:621–627. https://doi.org/10.1016/j.carbpol.2013.03.091 CrossRefPubMed

25.

Ismail H, Pasbakhsh P, Fauzi MA, Bakar AA (2008) Morphological, thermal and tensile properties of halloysite nanotubes filled ethylene propylene diene monomer (EPDM) nanocomposites. Polym Test 27:841–850. https://doi.org/10.1016/j.polymertesting.2008.06.007 CrossRef

26.

Hedicke-Hochstotter K, Lim GT, Altstadt V (2009) Novel polyamide nanocomposites based on silicate nanotubes of the mineral halloysite. Compos Sci Technol 69:330–334. https://doi.org/10.1016/j.compscitech.2008.10.011 CrossRef

27.

Yuan P, Tan D, Annabi-Bergaya F (2015) Properties and applications of halloysite nanotubes: recent research advances and future prospects. Appl Clay Sci 112:75–93. https://doi.org/10.1016/j.clay.2015.05.001 CrossRef

28.

Spitalsky Z, Tasis D, Papagelis K, Galiotis C (2010) Carbon nanotube–polymer composites: chemistry, processing, mechanical and electrical properties. Prog Polym Sci 35:357–401. https://doi.org/10.1016/j.progpolymsci.2009.09.003 CrossRef

29.

Bee ST, Ratnam CT, Sin LT, Tee TT, Hui D, Kadhum AA, Rahmat AR, Lau J (2014) Effects of electron beam irradiation on mechanical properties and nanostructural–morphology of montmorillonite added polyvinyl alcohol composite. Compos Part B Eng 63:141–153. https://doi.org/10.1016/j.compositesb.2014.03.021 CrossRef

30.

Suhas DP, Aminabhavi TM, Raghu AV (2014) para-Toluene sulfonic acid treated clay loaded sodium alginate membranes for enhanced pervaporative dehydration of isopropanol. Appl Clay Sci 101:419–429. https://doi.org/10.1016/j.clay.2014.08.017 CrossRef

31.

Gutierrez MQ, Echeverria I, Ihl M, Bifani V, Mauri AN (2012) Carboxymethylcellulose–montmorillonite nanocomposite films activated with murta (Ugni molinae Turcz) leaves extract. Carbohydr Polym 87:1495–1502. https://doi.org/10.1016/j.carbpol.2011.09.040 CrossRef

32.

Yadollahi M, Namazi H, Barkhordari S (2014) Preparation and properties of carboxymethyl cellulose/layered double hydroxide bionanocomposite films. Carbohydr Polym 108:83–90. https://doi.org/10.1016/j.carbpol.2014.03.024 CrossRefPubMed

33.

Lee KS, Chang YW (2013) Thermal, mechanical, and rheological properties of poly (ε-caprolactone)/halloysite nanotube nanocomposites. J Appl Polym Sci 128:2807–2816. https://doi.org/10.1002/app.38457 CrossRef

34.

Sain M, Suhara P, Law S, Bouilloux A (2005) Interface modification and mechanical properties of natural fiber-polyolefin composite products. J Reinf Plast Compos 24:121–130. https://doi.org/10.1177/0731684405041717 CrossRef

35.

Soheilmoghaddam M, Wahit MU (2013) Development of regenerated cellulose/halloysite nanotube bionanocomposite films with ionic liquid. Int J Biol Macromol 58:133–139. https://doi.org/10.1016/j.ijbiomac.2013.03.066 CrossRefPubMed

36.

De Silva RT, Pasbakhsh P, Goh KL, Chai SP, Ismail H (2013) Physico-chemical characterisation of chitosan/halloysite composite membranes. Polym Test 32:265–271. https://doi.org/10.1016/j.polymertesting.2012.11.006 CrossRef

37.

Schmitt H, Prashantha K, Soulestin J, Lacrampe MF, Krawczak P (2012) Preparation and properties of novel melt-blended halloysite nanotubes/wheat starch nanocomposites. Carbohydr Polym 89:920–927. https://doi.org/10.1016/j.carbpol.2012.04.037 CrossRefPubMed

Titel: Properties and characterization of carboxymethyl cellulose/halloysite nanotube bio-nanocomposite films: Effect of sodium dodecyl sulfate
verfasst von: Kathiravan Suppiah
Pei Leng Teh
Salmah Husseinsyah
Rozyanty Rahman
Publikationsdatum: 05.06.2018
Verlag: Springer Berlin Heidelberg
Erschienen in: Polymer Bulletin / Ausgabe 1/2019
Print ISSN: 0170-0839
Elektronische ISSN: 1436-2449
DOI: https://doi.org/10.1007/s00289-018-2392-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2019

Phenanthroimidazole-based monomers: synthesis, properties and self-polymerization

Glycolysis of poly(ethylene terephthalate) waste with diethyleneglycol under microwave irradiation and ZnSO4·7H2O catalyst

Thermomechanical behaviour of zirconia–multiwalled carbon nanotube-reinforced polypropylene hybrid composites

Calcium alginate gel and hard beads for the removal of total organic acid anions and heavy metal ions from industrial lean methyldiethanolamine solvent

Investigation of structural and thermal properties of distinct nanofillers-doped PVA composite films

Synthesis and characterization of poly(ester amide amide)s of different alkylene chain lengths

Premium Partner

Marktübersichten