nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

11.04.2022 | ORIGINAL ARTICLE

Research on explosive welding interface of titanium-steel under different welding parameters

verfasst von: Jian Wang, Xiao-jie Li, Shou-hua Dong, Hu-he Wang, Hong-hao Yan, Xiao-hong Wang

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 9-10/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In order to study the effect of welding parameter on titanium-steel clad plate by explosive welding, the explosive welding experiment was carried out on the titanium-steel by changing only the stand-off distance between flyer plate and base plate. The explosion parameters were determined by weldability window. Test the shear strength, hardness, and composition distribution of the experimental results interface. Measure the wavelength and amplitude; the welding interface formation process was simulated by AUTODYN. The results are as follows: the shear strength of the interface along the welding direction is greater than that of the vertical welding direction; the hardest place is the bimetal joint. As the stand-off distance increases, intermetallic compounds will be produced, and the ripple will gradually increase, and numerical simulation results are consistent with experimental results. Considering the mechanical properties and composition distribution, the quality of the titanium-steel explosive-welded clad plate is the best when the stand-off distance is 10 mm.

Vorheriger Artikel Numerical and experimental analyses of deposition characteristics of plasma-sprayed Al2O3-40%TiO2 on different substrates

Nächster Artikel Analytical modelling of side grinding of orthogonal laminated SiCf/SiC composites based on effective elastic properties

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Donachie MJ (2000) Titanium: a technical guide. ASM international

Xiao H, Qi Z, Yu C et al (2017) Preparation and properties for Ti/Al clad plates generated by differential temperature rolling. J Mater Process Technol 249:285–290. https://doi.org/10.1016/j.jmatprotec.2017.06.013CrossRef

Szymlek K (2008) Review of titanium and steel welding methods. Adv Mater Sci 8(1):186–194. https://doi.org/10.2478/v10077-008-0023-4CrossRef

Mousavi SAAA, Al-Hassani STS, Atkins AG (2008) Bond strength of explosively welded specimens. Mater Des 29(7):1334–1352. https://doi.org/10.1016/j.matdes.2007.06.010CrossRef

Ribeiro JB Mendes R Loureiro A (2014) Review of the weldability window concept and equations for explosive welding J Phys Conf Ser IOP Publishing, 500(5):052038. https://doi.org/10.1088/1742-6596/500/5/052038

Kahraman N, Gülenç B, Findik F (2005) Joining of titanium/stainless steel by explosive welding and effect on interface. J Mater Process Technol 169(2):127–133. https://doi.org/10.1016/j.jmatprotec.2005.06.045CrossRef

Manikandan P, Hokamoto K, Deribas AA et al (2006) Explosive welding of titanium/stainless steel by controlling energetic conditions. Mater Trans 47(8):2049–2055. https://doi.org/10.2320/matertrans.47.2049CrossRef

Luo N, Liang H, Sun X et al (2020) Research on the interfacial microstructure of three-layered stainless steel/Ti/low-carbon steel composite prepared by explosive welding. Compos Interfaces. https://doi.org/10.1080/09276440.2020.1794751CrossRef

Vaidyanathan PV, Ramanathan AR (1992) Design for quality explosive welding. J Mater Process Technol 32(1–2):439–448. https://doi.org/10.1016/0924-0136(92)90200-CCrossRef

10.

Rajani HRZ, Mousavi SAAA (2012) The effect of explosive welding parameters on metallurgical and mechanical interfacial features of Inconel 625/plain carbon steel bimetal plate. Mater Sci Eng A 556:454–464. https://doi.org/10.1016/j.msea.2012.07.012CrossRef

11.

Hoseini-Athar MM, Tolaminejad B (2016) Interface morphology and mechanical properties of Al-Cu-Al laminated composites fabricated by explosive welding and subsequent rolling process. Met Mater Int 22(4):670–680. https://doi.org/10.1007/s12540-016-5687-4CrossRef

12.

Athar MMH, Tolaminejad B (2015) Weldability window and the effect of interface morphology on the properties of Al/Cu/Al laminated composites fabricated by explosive welding. Mater Des 86:516–525. https://doi.org/10.1016/j.matdes.2015.07.114CrossRef

13.

Wang Y, Li X, Wang X et al (2018) Fabrication of a thick copper-stainless steel clad plate for nuclear fusion equipment by explosive welding. Fusion Eng Des 137:91–96. https://doi.org/10.1016/j.fusengdes.2018.08.017CrossRef

14.

Mousavi SAAA, Al-Hassani STS (2008) Finite element simulation of explosively-driven plate impact with application to explosive welding. Mater Des 29(1):1–19. https://doi.org/10.1016/j.matdes.2006.12.012CrossRef

15.

Liu WD, Liu KX, Chen QY et al (2009) Metallic glass coating on metals plate by adjusted explosive welding technique. Appl Surf Sci 255(23):9343–9347. https://doi.org/10.1016/j.apsusc.2009.07.033CrossRef

16.

Alipour R, Najarian F (2011) A FEM study of explosive welding of double layer tubes. International Journal of Mechanical and Mechatronics Engineering 5(1):183–185

17.

Li XJ, Mo F, Wang XH et al (2012) Numerical study on mechanism of explosive welding. Sci Technol Weld Joining 17(1):36–41. https://doi.org/10.1179/1362171811Y.0000000071CrossRef

18.

Wang Y, Beom HG, Sun M et al (2011) Numerical simulation of explosive welding using the material point method. Int J Impact Eng 38(1):51–60. https://doi.org/10.1016/j.ijimpeng.2010.08.003CrossRef

19.

Li Y, Liu C, Yu H et al (2017) Numerical simulation of Ti/Al bimetal composite fabricated by explosive welding. Metals 7(10):407. https://doi.org/10.3390/met7100407CrossRef

20.

Mousavi AAA, Burley SJ, Al-Hassani STS (2005) Simulation of explosive welding using the Williamsburg equation of state to model low detonation velocity explosives [J]. Int J Impact Eng 31(6):719–734. https://doi.org/10.1016/j.ijimpeng.2004.03.003CrossRef

21.

Liu MB, Zhang ZL, Feng DL (2017) A density-adaptive SPH method with kernel gradient correction for modeling explosive welding. Comput Mech 60(3):513–529. https://doi.org/10.1007/s00466-017-1420-5MathSciNetCrossRefMATH

22.

Xiaojie L, Yuxin W, Xiaohong W (2020) Theory on the design of bimetal explosive welding parameter (in Chinese). Engineering Blasting 26(05):5–17. https://doi.org/10.3969/j.issn.1006–7051.2020.05.001

23.

Wang X (2010) Manual of blasting. Metallurgical Industry Press, 828. (in Chinese)

24.

Zeng X et al (2019) Numerical and experimental studies on the explosive welding of plates with different initial strength. Journal of Mechanical and Mechatronics Engineering 63(4):967–974. https://doi.org/10.1007/s40194-019-00733-0CrossRef

25.

Johnson GR (1983) A constitutive model and data for materials subjected to large strains, high strain rates, and high temperatures. Proc. 7th Inf. Sympo. Ballistics, 541–547

Titel: Research on explosive welding interface of titanium-steel under different welding parameters
verfasst von: Jian Wang
Xiao-jie Li
Shou-hua Dong
Hu-he Wang
Hong-hao Yan
Xiao-hong Wang
Publikationsdatum: 11.04.2022
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 9-10/2022
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-022-09015-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9-10/2022

Multi-directional forging of large-scale Mg-9Gd-3Y-2Zn-0.5Zr alloy guided by 3D processing maps and finite element analysis

Melt pool feature analysis using a high-speed coaxial monitoring system for laser powder bed fusion of Ti-6Al-4 V grade 23

Servo control for super-high-thickness cutting in high-speed wire electrical discharge machining

Microstructure and mechanical properties of Al/Mg resistance element welded joints

Analysis of metal transfer and weld forming characteristics in triple-wire gas indirect arc welding

Deep learning-based automatic optical inspection system empowered by online multivariate autocorrelated process control

Premium Partner

Marktübersichten