nach oben

Lasers in Manufacturing and Materials Processing

Erschienen in:

19.07.2022

Semi-Empirical Modeling of Laser Micro-Drilling on Aluminium 6061 Alloy for Prediction of Geometrical Features

verfasst von: Bruhuadithya Balaji, B. Mouli Prasanth, P. Hariharan

Erschienen in: Lasers in Manufacturing and Materials Processing | Ausgabe 3/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Laser micro-hole drilling is one of the non–conventional processes performed across various industries for different purposes and materials. In this research work, an experimental investigation of laser micro-drilling on Aluminium alloy Al 6061 was carried out using a fiber laser source, which work under different conditions to produce 0.4 mm, 0.6 mm, 0.8 mm and 1.0 mm hole diameters. For producing these micro holes through laser micro-machining, input parameters such as laser power, laser pulse frequency, scanning speed were chosen and finding out the output responses such as geometrical features of the hole and surface roughness. The geometrical features considered were circularity error and the taper angle. Variations in the input responses were carried out at different levels in order to study the characteristics of the hole formed i.e., how various input parameters affect the circularity, taper angle and surface roughness. In addition, the surface morphology of the machined holes along the walls of the surface was analysed using Scanning Electron Microscope (SEM). Semi-empirical modelling was used for modelling the geometrical features such that the predicted values and the actual measured experimental values showed a statistical significance error less than 6% which proved the experiment carried out is significant.

Vorheriger Artikel An Empirical Statistical Model for Laser Cladding of Aluminium Bronze on S235JR Pipe

Nächster Artikel Ultrafast Laser Texturing of Stainless Steel in Water and Air Environment

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Hejjaji, A., Singh, D., Kubher, S., Kalyanasundaram, D., Gururaja, S.: Machining damage in FRPs: Laser versus conventional drilling. Compos. A Appl. Sci. Manuf. 82, 42–52 (2016). https://doi.org/10.1016/j.compositesa.2015.11.036CrossRef

Pattanayak, S., Panda, S.: Laser Beam Micro Drilling – a Review. Lasers Manuf. Mater. Process. (2018). https://doi.org/10.1007/s40516-018-0072-4CrossRef

Biswas, R., Kuar, A.S., Mitra, S.: ’Process optimization in Nd:YAG laser microdrilling of alumina–aluminium interpenetrating phase composite’. J. Mater. Res. Technol. 4(3), 323–332 (2015). https://doi.org/10.1016/j.jmrt.2015.01.006CrossRef

Jeyaprakash, N., Che-Hua Yang M., Kumar B.: ‘Laser Machining’., Laser Ablation (pp.1–16)., Intechopen (2020) https://doi.org/10.5772/intechopen.93779

Braham-Bouchnak, T., Germain, G., Morel, A., Lebrun, J.L.: ’The influence of laser assistance on the machinability of the titanium alloy Ti555–3’. Int. J. Adv. Manuf. Technol. 68(9–12), 2471–2481 (2013). https://doi.org/10.1007/s00170-013-4855-7CrossRef

Shokrani, A., Dhokia, V., Newman, S.T.: Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids. Int. J. Mach. Tools Manuf. 57, 83–101 (2012). https://doi.org/10.1016/j.ijmachtools.2012.02.002CrossRef

Germain, G., Dal Santo, P., Lebrun, J.L.: Comprehension of chip formation in laser assisted machining. Int. J. Mach. Tools Manufact. 51(3), 230–238 (2011). https://doi.org/10.1016/j.ijmachtools.2010.11.006CrossRef

Nagimova, A., Perveen, A.: A review on Laser Machining of hard to cut materials. Materials Today: Proceedings 18, 2440–2447 (2019). https://doi.org/10.1016/j.matpr.2019.07.092CrossRef

Uddin, M., Basak, A., Pramanik, A., Singh, S., Krolczyk, G.M., Prakash, C.: Evaluating Hole Quality in Drilling of Al 6061 Alloys. Materials 11(12), 2443 (2018). https://doi.org/10.3390/ma11122443CrossRef

10.

Tagliaferri, F., Genna, S., Leone, C., Palumbo, B., De Chiara, G.: Experimental study of fibre laser microdrilling of aerospace superalloy by trepanning technique. Int. J. Adv. Manufact. Technol. 93(9–12), 3203–3210 (2017). https://doi.org/10.1007/s00170-017-0773-4CrossRef

11.

Zwicker, M. F. R., Moghadam, M., Zhang, W., & Nielsen, C. V. Automotive battery pack manufacturing – a review of battery to tab joining. J. Adv. Join Process. 100017 (2020). https://doi.org/10.1016/j.jajp.2020.100017

12.

Mishra, S., Yadava, V.: Laser Beam Micro-Machining (LBMM) – A review. Opt. Lasers Eng. 73, 89–122 (2015). https://doi.org/10.1016/j.optlaseng.2015.03.017CrossRef

13.

Sen, A., Doloi, B., & Bhattacharyya, B. An experimental investigation into fibre laser micro-drilling of quartz. Int. J. Mechatron. Manuf. Syst. 11(2/3), 182 (2018). https://doi.org/10.1504/IJMMS.2018.092874

14.

Sukumar, S., & Kar, S. P.: A numerical approach for a comparative study of laser drilling process under single and repetitive pulse. Heat Transf-Asian Res. 1–23 (2018). https://doi.org/10.1002/htj.21385

15.

Mangesh V., Pantawane., Sameehan S. Joshi., & Narendra B. Dahotre: ‘Laser Beam Machining of Aluminium and Aluminium Alloys’., ASM Handbook, Volume 2A, Aluminum Science and Technology (2018). https://doi.org/10.31399/asm.hb.v02a.a0006532

16.

Bugayev, A.A., Gupta, M.C., El-Bandrawy, M.: Dynamics of laser hole drilling with nanosecond periodically pulsed laser. Opt. Lasers Eng. 44(8), 797–802 (2006). https://doi.org/10.1016/j.optlaseng.2005.07.011CrossRef

17.

Tu, J., Paleocrassas, A.G., Reeves, N., Rajule, N.: Experimental characterization of a micro-hole drilling process with short micro-second pulses by a CW single-mode fiber laser. Opt. Lasers Eng. 55, 275–283 (2014). https://doi.org/10.1016/j.optlaseng.2013.11.002CrossRef

18.

Tu, J., Lehman, T., & Reeves, N: ‘Rapid and High Aspect Ratio Micro-hole Drilling With Multiple Micro-Second Pulses Using a CW Single-Mode Fiber Laser’., High Speed Machining, 2(1) (2016). https://doi.org/10.1515/hsm-2016-0003

19.

Tu, J., Reeves, N.: Feasibility study of microneedle fabrication from a thin nitinol wire using a CW single-mode fiber laser. Open Eng. 9(1), 167–177 (2019). https://doi.org/10.1515/eng-2019-0023

20.

Voisey, K. T: Laser drilling of metallic and nonmetallic materials and quality assessment. Compr. Mater. Process. 177–194 (2014). https://doi.org/10.1016/B978-0-08-096532-1.00919-5

21.

Tunna, L., O’Neill, W., Khan, A., Sutcliffe, C.: Analysis of laser micro drilled holes through aluminium for micro-manufacturing applications. Opt. Lasers Eng. 43(9), 937–950 (2005). https://doi.org/10.1016/j.optlaseng.2004.11.001CrossRef

22.

Marimuthu, S., Dunleavey, J., Smith, B.: Laser Based Machining of Aluminium Metal Matrix Composites. Procedia CIRP 85, 243–248 (2019). https://doi.org/10.1016/j.procir.2019.09.007CrossRef

23.

Marimuthu, S., Dunleavey, J., Liu, Y., Smith, B., Kiely, A., Antar, M.: Characteristics of hole formation during laser drilling of SiC reinforced aluminium metal matrix composites. J. Mater. Process. Technol. 271, 554–567 (2019). https://doi.org/10.1016/j.jmatprotec.2019.04.030CrossRef

24.

Banat, D., Ganguly, S., Meco, S., Harrison, P.: Application of high power pulsed nanosecond fibre lasers in processing ultra-thin aluminium foils. Opt. Lasers Eng. 129, 106075 (2020). https://doi.org/10.1016/j.optlaseng.2020.106075CrossRef

25.

Czotscher, T., Vollertsen, F.: Analysis of Melting and Melt Expulsion During Nanosecond Pulsed Laser Ablation. Physics Procedia 83, 53–61 (2016). https://doi.org/10.1016/j.phpro.2016.08.007CrossRef

26.

Zhao, W., Shen, X., Liu, H., Wang, L., Jiang, H.: Effect of high repetition rate on dimension and morphology of micro-hole drilled in metals by picosecond ultra-short pulse laser. Opt. Lasers Eng. 124, 105811 (2020). https://doi.org/10.1016/j.optlaseng.2019.105811CrossRef

27.

Zhao, W., Liu, H., Shen, X., Wang, L., Mei, X.: Percussion Drilling Hole in Cu, Al, Ti and Ni Alloys Using Ultra-Short Pulsed Laser Ablation. Materials 13(1), 31 (2019). https://doi.org/10.3390/ma13010031CrossRef

28.

Kelly, R., Miotello, A.: Comments on explosive mechanisms of laser sputtering. Appl. Surf. Sci. 96–98, 205–215 (1996). https://doi.org/10.1016/0169-4332(95)00481-5CrossRef

29.

Zhang, Y., Shen, Z., Ni, X.: Modeling and simulation on long pulse laser drilling processing. Int. J. Heat Mass Transf. 73, 429–437 (2014). https://doi.org/10.1016/j.ijheatmasstransfer.2014.02.037CrossRef

30.

Low, D.K., Li, L., Corfe, A., Byrd, P.: Spatter-free laser percussion drilling of closely spaced array holes. Int. J. Mach. Tools Manuf. 41(3), 361–377 (2001). https://doi.org/10.1016/S0890-6955(00)00078-XCrossRef

31.

Bahar, N.D., Marimuthu, S., Yahya, W.J.: Pulsed Nd: YAG laser drilling of aerospace materials (Ti-6Al-4V). IOP Conf. Ser. Mater. Sci. Eng. 152, 012056 (2016). https://doi.org/10.1088/1757-899X/152/1/012056CrossRef

32.

Hamad, A. H.: Effects of Different Laser Pulse Regimes (Nanosecond, Picosecond and Femtosecond) on the Ablation of Materials for Production of Nanoparticles in Liquid Solution. High Energy and Short Pulse Lasers (2016). https://doi.org/10.5772/63892

33.

Li, X., & Guan, Y.: Theoretical fundamentals of short pulse laser–metal interaction: A review. Nanotechnol. Precis. Eng. (2020). https://doi.org/10.1016/j.npe.2020.08.001

34.

Tan, X., Zhang, D., Yu, B., Li, Z.-H., Li, G., Li, L.: Vaporization effect studying on high-power nanosecond pulsed laser deposition. Physica B: Condensed Matter’. 358(1–4), 86–92 (2005). https://doi.org/10.1016/j.physb.2004.12.030CrossRef

35.

Bogaerts, A., Chen, Z.: Effect of laser parameters on laser ablation and laser-induced plasma formation: A numerical modeling investigation. Spectrochim. Acta B At. Spectrosc. 60(9–10), 1280–1307 (2005). https://doi.org/10.1016/j.sab.2005.06.009CrossRef

36.

Tan, X., Zhang, D., Li, Z., Liu, G., Lili, Fan, R.: Ionization effect to plasma expansion study during nanosecond pulsed laser deposition. Phys. Lett. A 370(1), 64–69 (2007). https://doi.org/10.1016/j.physleta.2007.05.026CrossRef

37.

Voisey, K.T., Kudesia, S.S., Rodden, W.S.O., Hand, D.P., Jones, J.D.C., Clyne, T.W.: ‘Melt ejection during laser drilling of metals. Mater. Sci. Eng. A 356(1–2), 414–424 (2003). https://doi.org/10.1016/S0921-5093(03)00155-2CrossRef

38.

Gautam, G.D., Pandey, A.K.: Pulsed Nd:YAG laser beam drilling: A review. Opt. Laser Technol. 100, 183–215 (2018). https://doi.org/10.1016/j.optlastec.2017.09.054CrossRef

39.

Ganguly, D., Acherjee, B., Kuar, A.S., Mitra, S.: Hole characteristics optimization in Nd: YAG laser micro-drilling of zirconium oxide by grey relation analysis. Int. J. Adv. Manuf. Technol. 61(9), 1255–1262 (2012). https://doi.org/10.1007/s00170-012-4090-7CrossRef

40.

Kuar, A.S., Acherjee, B., Ganguly, D., Mitra, S.: Optimization of Nd: YAG laser parameters for microdrilling of alumina with multiquality characteristics via grey–Taguchi method. Mater. Manuf. Process. 27(3), 329–336 (2012). https://doi.org/10.1080/10426914.2011.585493CrossRef

41.

Kuar, A.S., Acherjee, B., Mitra, S.: Multi-objective optimisation of Nd: YAG laser micro-drilling of zirconia using Taguchi method with desirability function analysis. Int. J. Mechatron. Manuf. Syst. 6(2), 115–132 (2013). https://doi.org/10.1504/IJMMS.2013.053822CrossRef

42.

Kuar, A.S., Acherjee, B., Mitra, S.: Laser micro-drilling of alumina: parametric modelling and sensitivity analysis. Int. J. Mechatron. Manuf. Syst. 5(3–4), 294–307 (2012). https://doi.org/10.1504/IJMMS.2012.048236CrossRef

43.

Roy, N., Kuar, A.S., Mitra, S. and Acherjee, B. (2015). Nd: YAG laser microdrilling of SiC-30BN nanocomposite: Experimental study and process optimization. In Lasers Based Manufacturing, 317–341. Springer, New Delhi. https://doi.org/10.1007/978-81-322-2352-8_17

Titel: Semi-Empirical Modeling of Laser Micro-Drilling on Aluminium 6061 Alloy for Prediction of Geometrical Features
verfasst von: Bruhuadithya Balaji
B. Mouli Prasanth
P. Hariharan
Publikationsdatum: 19.07.2022
Verlag: Springer US
Erschienen in: Lasers in Manufacturing and Materials Processing / Ausgabe 3/2022
Print ISSN: 2196-7229
Elektronische ISSN: 2196-7237
DOI: https://doi.org/10.1007/s40516-022-00181-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2022

Enhancing hardness in overlapping scanner-based laser area of carbon and tool steel by multi-pin ultrasonic impact peening

Ultrafast Laser Texturing of Stainless Steel in Water and Air Environment

Influence of powder characteristics on properties of parts manufactured by metal additive manufacturing

Effect of Process Parameters on Powder Bed Fusion Maraging Steel 300: A Review

Influence of Pulse Energy and a Material’s Magnetic Field on the Morphology of the Dimples Produced with Nanosecond Pulsed Laser on a Magnet

An Empirical Statistical Model for Laser Cladding of Aluminium Bronze on S235JR Pipe

Premium Partner

Marktübersichten