Metallography, Microstructure, and Analysis

Looking Forward to the IMS Symposium at MS&T 2018—Planning for MS&T 2019

Daniel P. Dennies

Wear of Polycrystalline Boron Nitride Tool During the Friction Stir Welding of Steel

M. Almoussawi, A. J. Smith, M. Faraji

Effect of Magnesium and Calcium Addition on Carbides Characterizations and Anisotropy Ductile Fracture of Inconel 718

Javad Teimouri, Seyed Rahman Hosseini, Khosro Farmanesh

Microstructural Characterization and Mechanical Properties of Friction-Welded IN718 and SS410 Dissimilar Joint

P. Anitha, M. C. Majumder, V. Saravanan, S. Rajakumar

Microstructural Characterization of the Face-Centered Cubic-to-Hexagonal Close-Packed Transition in a Cobalt-Base Alloy and its Effect on Mechanical Strength

H. M. Tawancy

A Comparison Between Half Bead Tempering and Conventional Welding Process on Properties of 9Cr–1Mo Steel

Y. Abbaszadeh, R. Derakhshandeh-Haghighi

Effect of Various Welding Parameters on Corrosion Behavior of Friction-Stir-Welded AA 7075-T651 Alloys

Pratik H. Shah, Vishvesh Badheka

Effect of Tool Traverse Speed on Strength, Hardness, and Ductility of Friction-Stir-Processed LM25AA-5% SiCp Metal Matrix Composites

P. Vijayavel, V. Balasubramanian, I. Rajkumar

An Investigation on Microstructural and Mechanical Properties of Porous 60NiTi Parts Solutionized by Different Cost-Effective Methods

Khashayar Khanlari, Maziar Ramezani, Piaras Kelly, Muhammad Hayat, Peng Cao, Thomas Neitzert

Effect of Phosphorus Addition on Dry Sliding Behavior of Fe–P Alloys Prepared by Powder Metallurgy

S. K. Chaurasia, Ujjwal Prakash, Vikram Dabhade, S. K. Nath

Study of the Microstructural Evolution in a 35Ni-25Cr-Nb Heat-Resistant Alloy by Dilatometry and Electron Microscopy

M. H. Sosa Lissarrague, S. Limandri, F. Prado, A. C. Picasso

On the Microstructures of Platinum Aluminide Bond Coatings Produced by Different Aluminizing Methods: Effects on the Performance of Thermal Barrier Coatings on Ni-Based Superalloys

H. M. Tawancy

MMA Editorial Board Member Participates in Key Study to Improve Properties of Steel

Dialogue with Emerging Engineers

Can You Identify the Microstructure?