nach oben

Journal of Materials Engineering and Performance

Erschienen in:

05.07.2018

Study of Tribological Characteristics of Multi-pass SMAW Armox 500T Steel Joints

verfasst von: Ambuj Saxena, A. Kumaraswamy, Vemuri Madhu, G. Madhusudhan Reddy

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 8/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Study of tribological characteristics of multi-pass shielding metal arc-welded (SMAW) Armox 500T steel joints in comparison with its counterpart base metal was carried out. Series of dry sliding wear tests were carried out as a function of applied loads ranging from 30 to 120 N and sliding distances from 1000 to 6000 m at a constant sliding velocity using pin-on-disk tribometer. It was observed that specific wear rate and lost volume in SMAW joints significantly high compared to Armox 500T base metal in the range of loads and sliding distances considered in the present study. The scanning electron micrographs indicated that wear of Armox 500T base metal occurred due to micro-grooving and adhesion, on the other hand, micro-delamination was observed in SMAW joints. Microstructural investigations revealed that base metal exhibits superior tribological properties as compared to SMAW joints due to the formation of martensite lath in acicular form with coarse and fine precipitates.

Vorheriger Artikel The Sliding Wear and Frictional Behavior of M50-10 wt.%(Sn-Ag-Cu) Self-Lubricating Materials at Elevated Temperatures

Nächster Artikel Fatigue Properties of Ti-6Al-4V Titanium Alloy Friction Stir Welding Joint

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Z. Xu and F. Huang, Plastic Behavior and Constitutive Modeling of Armor Steel Over Wide Temperature and Strain Rate Ranges, Acta Mech. Solida Sin., 2012, 25(6), p 598–608CrossRef

S. Banerjee, S. Dhar, D. Acharyya, and N. Nayak, Datta, Determination of Johnson Cook Material and Failure Model Constants and Numerical Modeling of Charpy Impact Test of Armor Steel, Mater. Sci. Eng. A, 2015, 640, p 200–209CrossRef

S.R. Ahmed, L.A. Agarwal, and B.S.S. Daniel, Effect of Different Post Weld Heat Treatments on the Mechanical properties of Cr-Mo Boiler Steel Welded with SMAW Process, Mater. Today Proc., 2015, 2(4–5), p 1059–1066CrossRef

G.M. Reddy, T. Mohandas, and K.K. Papukutty, Effect of Welding Process on the Ballistic Performance of High-Strength Low-Alloy Steel Weldments, J. Mater. Process. Technol., 1998, 74(1), p 27–35CrossRef

H. So, H.M. Chen, and L.W. Chen, Extrusion Wear and Transition of Wear Mechanisms of Steel, Wear, 2008, 265(7), p 1142–1148CrossRef

H.A. Ameen, K.S. Hassan, E. Mohamed, and M. Mubarak, Effect of Loads, Sliding Speeds and Times on the Wear Rate for Different Materials, Am. J. Sci. Ind. Res., 2011, 2, p 99–106

Z.Y. Yang, M.G.S. Naylor, and D.A. Rigney, Sliding Wear of 304 and 310 Stainless Steels, Wear, 1985, 105(1), p 73–86CrossRef

J.D. Bressan, D.P. Daros, A. Sokolowski, R.A. Mesquita, and C.A. Barbosa, Influence of Hardness on the Wear Resistance of 17-4 PH Stainless Steel Evaluated by the Pin-on-Disc Testing, J. Mater. Process. Technol., 2008, 205(1), p 353–359CrossRef

G. Magudeeswaran, V. Balasubramanian, G.M. Reddy, and T.S. Balasubramanian, Effect of Welding Processes and Consumables on Tensile and Impact Properties of High Strength Quenched and Tempered Steel Joints, J. Iron. Steel Res. Int., 2008, 15(6), p 87–94CrossRef

10.

R. Datta, D. Mukerjee, and S. Mishra, Weldability and Toughness Evaluation of Pressure Vessel Quality Steel Using the Shielded Metal Arc Welding (SMAW) Process, J. Mater. Eng. Perform., 1998, 7(6), p 817–823CrossRef

11.

S.N. Krishnan, V. Toppo, A. Basak, and K.K. Ray, Wear Behaviour of a Steel Weld Joint, Wear, 2006, 260(11), p 1285–1294CrossRef

12.

M.B.S. Windarta and F. Khairul, Influence of Applied Load on Wear Characterizations of Rail Material, J. Appl. Sci., 2011, 11(9), p 1636–1641CrossRef

13.

N.P. Suh and H.C. Sin, On the Genesis of Friction and Its Effect on Wear, Solid Contact and Lubrication, AMD, Vol 39, H.S. Cheng and L.M. Keer, Ed., ASME, New York, 1980, p 167–183

14.

V.K. Gupta, S. Ray, and O.P. Pandey, Dry Sliding Wear Characteristics of 0.13 wt.% Carbon Steel, Mater. Sci. Pol. , 2008, 26(3), p 617–631

15.

ASTM, Designation: E8. Standard Test Methods of Tension Testing of Metallic Materials, 2003 [metric].

16.

ASTM, Designation: G99-95; Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, 1995, p 336–390.

17.

C. Pandey, M.M. Mahapatra, P. Kumar, N. Saini, and A. Srivastava, Microstructure and Mechanical Property Relationship for Different Heat Treatment and Hydrogen Level in Multi-pass Welded P91 Steel Joint, J. Manuf. Processes., 2017, 28, p 220–234CrossRef

18.

Q. Li, Y. Zhu, and J. Guo, Microstructure and Mechanical Properties of Resistance-Welded NiTi/Stainless Steel Joints, J. Mater. Process. Technol., 2017, 249, p 538–548CrossRef

19.

A.L. Schaeffler, Constitution Diagram for Stainless-Steel Weld Metal. 2. Schaeffler Diagram, Metal Prog., 1974, 106(1), p 227–227

20.

D. Shirmohammadi, M. Movahedi, and M. Pouranvari, Resistance Spot Welding of Martensitic Stainless steel: Effect of Initial Base Metal Microstructure on Weld Microstructure and Mechanical Performance, Mater. Sci. Eng. A, 2017, 703, p 154–161.1zCrossRef

21.

M. Kawamoto and K. Okabayashi, Study of Dry Sliding Wear of Cast Iron as a Function of Surface Temperature, Wear, 1980, 58, p 59–95CrossRef

22.

S. Bahadur and I. Iskandar, Effect of Test Variables on the Friction and Wear of Alumina, in Wear Testing of Advanced Materials. ASTM International, West Conshohocken, 1992

23.

D. Das, A.K. Dutta, and K.K. Ray, Correlation of Microstructure with Wear Behavior of Deep Cryogenically Treated AISI, D2 Steel, Wear, 2009, 267(9), p 1371–1380CrossRef

24.

C. Kanchanomai, B. Saengwichian, and A. Manonukul, Delamination Wear of Metal Injection Molded 316L Stainless Steel, Wear, 2009, 267(9), p 1665–1672CrossRef

25.

Y.C. Chiou, K. Kato, and T. Kayaba, Effect of Normal Stiffness in Loading System on Wear of Carbon Steel—Part 1: Severe-Mild Wear Transition, ASME, J. Tribol., 1985, 107, p 491–495CrossRef

26.

F. Archard, Contact and Rubbing of Flat Surfaces, J. Appl. Phys., 1953, 24(8), p 981–988CrossRef

27.

C.C. Viafara, M.I. Castro, J.M. Velez, and A. Toro, Unlubricated Sliding Wear of Pearlitic and Bainitic Steels, Wear, 2005, 259(1), p 405–411CrossRef

Titel: Study of Tribological Characteristics of Multi-pass SMAW Armox 500T Steel Joints
verfasst von: Ambuj Saxena
A. Kumaraswamy
Vemuri Madhu
G. Madhusudhan Reddy
Publikationsdatum: 05.07.2018
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 8/2018
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-018-3488-2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 8/2018

Correlation Between the Pitting Potential Evolution and Phase Precipitation Kinetics in the 2205 Duplex Stainless Steel

Low Solution Temperature Heat Treatment of AlSi9Cu3(Fe) High-Pressure Die-Casting Actual Automotive Components

Corrosion Behavior of Nano-/Ultrafine-Grained Al-0.2 wt.% Sc Alloy Produced by Accumulative Roll Bonding (ARB)

Toward a Biocompatible and Degradable Battery Using a Mg-Zn-Zr Alloy with β-Tricalcium Phosphate Nanocoating as Anode

Effect of Thiourea on the Corrosion Behavior of Aluminum Anode Foil of Aluminum Electrolytic Capacitor

A Review on Micro- and Nanoscratching/Tribology at High Temperatures: Instrumentation and Experimentation

Premium Partner

Marktübersichten