nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

30.01.2021 | ORIGINAL ARTICLE

Surface burn behavior in creep-feed deep grinding of gamma titanium aluminide intermetallics: characterization, mechanism, and effects

verfasst von: Xinxin Xi, Yejun Zhu, Tao Chen, Zhixin Wu, Lama Anggei, Wenfeng Ding

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 3-4/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This article presents the surface burn behavior when creep-feed grinding gamma titanium aluminide (γ-TiAl) intermetallic. First, the main characteristics of burnt surface morphology were detected. Subsequently, surface burn mechanism was revealed by analyzing compositional changes in the surface layer via X-ray photoelectron spectroscopy. Lastly, the effects of grinding temperature on grinding force and surface integrity were discussed. Finding showed that a high grinding temperature would lead to a heavy color, from light brown to hyacinthine, on the burnt surface. The burning process was dominated by oxidation of Ti and Al. Ti was generally in the state of TiO₂ on the ground surface, whereas lower valence oxide of Ti was found on the subsurface. This oxide layer could produce a reduced ratio of the tangential grinding force to the normal one. Elevated temperature would produce grinding and quenching cracks on a burnt surface, and tensile residual stress might be developed if the temperature is extremely high. Surface morphology and topography characteristics indicated that, unlike conventional titanium alloys (e.g., Ti-6Al-4V), a marginal physical reaction occurred on the workpiece surface during the burning process of γ-TiAl intermetallics due to poor material ductility.

Vorheriger Artikel Surface finishing of additively manufactured IN718 lattices by electrochemical machining

Nächster Artikel Experimental study on short electric arc machining of Ti6Al4V in terms of power output characteristics

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Wu XH (2006) Review of alloy and process development of TiAl alloys. Intermetallics 14(10-11):1114–1122. https://doi.org/10.1016/j.intermet.2005.10.019CrossRef

Cobbinah PV, Matizamhuka W, Machaka R, Shongwe MB, Mitarai YY (2020) The effect of Ta additions on the oxidation resistance of SPS-produced TiAl alloys. Int J Adv Manuf Technol 106:3203–3215. https://doi.org/10.1007/s00170-019-04885-7CrossRef

Davies PD, Davies HM, Watkins I, Britton DA (2020) The joining of gamma titanium aluminides via the powder interlayer bonding method. Int J Adv Manuf Technol 109:2049–2054. https://doi.org/10.1007/s00170-020-05725-9CrossRef

Aspinwall DK, Dewes RC, Mantle AL (2005) The machining of γ-TiAl intermetallic alloys. CIRP Ann Manuf Technol 54(1):99–104. https://doi.org/10.1016/S0007-8506(07)60059-6CrossRef

Ulutan D, Ozel T (2011) Machining induced surface integrity in titanium and nickel alloys: a review. Int J Mach Tools Manuf 51(3):250–280. https://doi.org/10.1016/j.ijmachtools.2010.11.003CrossRef

Klocke F, Soo SL, Karpuschewski B, Webster JA, Novovic D, Elfizy A, Axinte DA, Tönissen S (2015) Abrasive machining of advanced aerospace alloys and composites. CIRP Ann Manuf Technol 64:581–604. https://doi.org/10.1016/j.cirp.2015.05.004CrossRef

Mao C, Zhang Y, Peng X, Zhang B, Hu Y, Bi Z (2018) Wear mechanism of single cBN-WC-10Co fiber cutter in machining of Ti-6Al-4V alloy. J Mater Process Technol 59:45–57. https://doi.org/10.1016/j.jmatprotec.2018.04.015CrossRef

Xi XX, Yu TY, Ding WF, Xu JH (2018) Grinding of Ti₂AlNb intermetallics using silicon carbide and alumina abrasive wheels: tool surface topology effect on grinding force and ground surface quality. Precis Eng 53:134–145. https://doi.org/10.1016/j.precisioneng.2018.03.007CrossRef

Zhang JC, Wu WT, Yang M, Zhang YB, Jia DZ, Hou LY, Li RZ, Cao HJ, Ali HM (2020) Convective heat transfer coefficient model under nanofluid minimum quantity lubrication coupled with cryogenic air grinding Ti-6Al-4V. Int J Precis Eng Manuf Green Technol. https://doi.org/10.1007/s40684-020-00268-6

10.

Xi XX, Ding WF, Fu YC, Xu JH (2017) Grindability evaluation and tool wear during grinding of Ti₂AlNb intermetallics. Int J Adv Manuf Technol 94(1):1441–1450

11.

Mantle AL, Aspinwall DK (2001) Surface integrity of a high speed milled gamma titanium aluminide. J Mater Process Technol 118(1):143–150. https://doi.org/10.1016/S0924-0136(01)00914-1CrossRef

12.

Xi XX, Ding WF, Wu ZX, Anggie L (2020) Performance evaluation of creep feed grinding of γ-TiAl intermetallics with electroplated diamond wheels. Chin J Aeronaut. https://doi.org/10.1016/j.cja.2020.04.031

13.

Huang BT, Li CH, Zhang YB, Ding WF, Yang M, Yang YY, Zhai H, Xu XF, Wang DZ, Debnath S, Jamil M, Li HN, Ali HM, Gupta MK, Said Z (2020) Advances in fabrication of ceramic corundum abrasives based on sol-gel process. Chin J Aeronaut. https://doi.org/10.1016/j.cja.2020.07.004

14.

Miao Q, Ding WF, Kuang WJ, Yang CY (2019) Grinding force and surface quality in creep feed profile grinding of turbine blade root of nickel-based superalloy with microcrystalline alumina abrasive wheels. Chin J Aeronaut. https://doi.org/10.1016/j.cja.2019.11.006

15.

Li BK, Dai CW, Ding WF, Yang CY, Li CH, Kulik O, Shumyacher V (2020) Prediction on grinding force during grinding powder metallurgy nickel-based superalloy FGH96 with electroplated CBN abrasive wheel. Chin J Aeronaut. https://doi.org/10.1016/j.cja.2020.05.002

16.

Li BK, Miao Q, Li M, Zhang X, Ding WF (2020) An investigation on machined surface quality and tool wear during creep feed grinding of powder metallurgy nickel-based superalloy FGH96 with alumina abrasive wheels. Adv Manuf 8(2):160–176. https://doi.org/10.1007/s40436-020-00305-2CrossRef

17.

Qi H, Qin SK, Cheng ZC, Zou YL, Cai DH, Wen DH (2021) DEM and experimental study on the ultrasonic vibration-assisted abrasive finishing of WC-8Co cemented carbide cutting edge. Powder Technol 378:716–723. https://doi.org/10.1016/j.powtec.2020.10.043CrossRef

18.

Chen ZZ, Qi H, Zhao B, Zhou Y, Shi LW, Li HN, Ding WF (2020) On the tribology and grinding performance of graphene-modified porous composite-bonded CBN wheel. Ceram Int 47:3259–3266. https://doi.org/10.1016/j.ceramint.2020.09.165CrossRef

19.

Dogra M, Sharma VS, Dureja JS, Gill SS (2018) Environment-friendly technological advancements to enhance the sustainability in surface grinding-a review. J Clean Prod 197:218–231. https://doi.org/10.1016/j.jclepro.2018.05.280CrossRef

20.

Sinha MK, Setti D, Ghosh S, Rao PV (2016) An investigation on surface burn during grinding of Inconel 718. J Manuf Process 21:124–133. https://doi.org/10.1016/j.jmapro.2015.12.004CrossRef

21.

Xu X, Yu Y (2002) XPS and SEM characterization of wheel/workpiece interface in grinding of superalloy. Surf Interface Anal 33(4):343–350. https://doi.org/10.1002/sia.1225CrossRef

22.

Xu XP, Yu YQ, Huang H (2003) Mechanisms of abrasive wear in the grinding of titanium (TC4) and nickel (K417) alloys. Wear 255:1421–1426. https://doi.org/10.1016/S0043-1648(03)00163-7CrossRef

23.

Tang JS, Pu XF, Xu HJ, Zhang YZ (1990) Studies on mechanisms and improvement of workpiece burn during grinding of titanium alloys. CIRP Ann Manuf Technol 39(1):353–356. https://doi.org/10.1016/S0007-8506(07)61071-3CrossRef

24.

Bentley SA, Mantle AL, Aspinwall DK (1999) The effect of machining on the fatigue strength of a gamma titanium aluminide intermetallic alloy. Intermetallics 7:967–969. https://doi.org/10.1016/S0966-9795(99)00008-4CrossRef

25.

Hood R, Aspinwall DK, Voice W (2007) Creep feed grinding of gamma titanium aluminide and burn resistant titanium alloys using SiC abrasive. Int J Mach Tools Manuf 47(9):1486–1492. https://doi.org/10.1016/j.ijmachtools.2006.10.008CrossRef

26.

Murtagian GR, Hecker RL, Liang SY, Danyluk S (2010) Plastic deformation depth modeling on grinding of gamma titanium aluminides. Int J Adv Manuf Technol 49(1):89–95. https://doi.org/10.1007/s00170-009-2387-yCrossRef

27.

Bhaduri D, Soo SL, Aspinwall DK, Novovic D, Bohr S, Harden P, Webster JA (2017) Ultrasonic assisted creep feed grinding of gamma titanium aluminide using conventional and superabrasive wheels. CIRP Ann Manuf Technol 66(1):341–344. https://doi.org/10.1016/j.cirp.2017.04.085CrossRef

28.

Hood R, Cooper P, Aspinwall DK, Soo SL, Lee DS (2015) Creep feed grinding of γ-TiAl using single layer electroplated diamond superabrasive wheels. CIRP Ann Manuf Technol 11:36–44. https://doi.org/10.1016/j.cirpj.2015.07.001CrossRef

29.

Hood R (2010) The machinability of a gamma titanium aluminide intermetallic [Dissertation]. University of Birmingham, Birmingham

30.

Zeppenfeld C, Klocke F (2006) Speed stroke grinding of γ-titanium aluminides. CIRP Ann Manuf Technol 55(1):333–338. https://doi.org/10.1016/S0007-8506(07)60429-6CrossRef

31.

Gao T, Li CH, Yang M, Zhang YB, Jia DZ, Ding WF, Debnath S, Yu TB, Said Z, Wang J (2021) Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant. J Mater Process Technol 290:116976. https://doi.org/10.1016/j.jmatprotec.2020.116976CrossRef

32.

Chen N, Li HN, Wu JM, Li ZJ, Li L, Liu GY, He N (2020) Advances in micro milling: from tool fabrication to process outcomes. Int J Mach Tools Manuf 160:103670. https://doi.org/10.1016/j.ijmachtools.2020.103670CrossRef

33.

Li HN, Zhao Y, Cao S, Chen H, Qi H, Sun X, Li C, Liu G (2021) Controllable generation of 3D textured abrasive tools via multiple-pass laser ablation: Parameter effects and selection. J Mater Process Technol 291:117050. https://doi.org/10.1016/j.jmatprotec.2021.117050CrossRef

34.

Zhang Z, Yao P, Huang C, Wang J, Xue D, Deng W, Zhang Z (2019) Investigation and modeling of microgrooves generated on diamond grinding wheel by abrasive waterjet based on Box-Behnken experimental design. Int J Adv Manuf Technol 100(1-4):321–332. https://doi.org/10.1007/s00170-018-2749-4CrossRef

35.

Malkin S, Guo C (2007) Thermal analysis of grinding. CIRP Ann Manuf Technol 56(2):760–782. https://doi.org/10.1016/j.cirp.2007.10.005CrossRef

36.

Ren YH, Zhang B, Zhou ZX (2009) Specific energy in grinding of tungsten carbides of various grain sizes. CIRP Ann Manuf Technol 58:299–302. https://doi.org/10.1016/j.cirp.2009.03.026CrossRef

37.

Moulder JF, Stickle WF, Sobol PE, Bomben KD (1995) Handbook of X-ray photoelectron spectroscopy: a reference book of standard spectra for identification and interpretation of XPS data. Physical Electronics, Inc., Eden Prairie

38.

Kuznetsov MV, Zhuravlev JF, Zhilyaev VA, Gubanov VA (1992) XPS study of the nitrides, oxides and oxynitrides of titanium. J Electron Spectrosc Relat Phenom 58(1-2):1–9. https://doi.org/10.1016/0368-2048(92)80001-OCrossRef

39.

Kuznetsov MV, Frickel DP, Shalaeva EV, Medvedeva NI (1998) Adsorption of carbon monoxide on Ti(0001). J Electron Spectrosc Relat Phenom 96(1-3):29–36. https://doi.org/10.1016/S0368-2048(98)00219-9CrossRef

40.

Chen XH, Zhang PZ, Wei DB, Ding F, Li FK, Wei XF, Ma SJ (2018) Preparation and characterization of Cr/CrC multilayer on γ-TiAl alloy by the double glow plasma surface alloying technology. Mater Lett 215:292–295. https://doi.org/10.1016/j.matlet.2017.12.104CrossRef

41.

Lin XZ, Zhu MH, Zheng JF, Luo J, Mo JL (2010) Fretting wear of micro-arc oxidation coating prepared on Ti6Al4V alloy. Trans Nonferrous Metals Soc China 20(4):537–546. https://doi.org/10.1016/S1003-6326(09)60175-8CrossRef

42.

Malkin S (2008) Grinding technology: theory and application of machining with abrasives, 2nd edn. Industrial Press, New York

43.

Lin B, Zhou K, Guo J, Liu QY, Wang WJ (2018) Influence of grinding parameters on surface temperature and burn behaviors of grinding rail. Tribol Int 122:151–162. https://doi.org/10.1016/j.triboint.2018.02.017CrossRef

44.

Ginting A, Nouari M (2009) Surface integrity of dry machined titanium alloys. Int J Mach Tools Manuf 49:325–332. https://doi.org/10.1016/j.ijmachtools.2008.10.011CrossRef

Titel: Surface burn behavior in creep-feed deep grinding of gamma titanium aluminide intermetallics: characterization, mechanism, and effects
verfasst von: Xinxin Xi
Yejun Zhu
Tao Chen
Zhixin Wu
Lama Anggei
Wenfeng Ding
Publikationsdatum: 30.01.2021
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 3-4/2021
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-06677-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3-4/2021

Modeling of material flow in dissimilar friction stir lap welding of aluminum and brass using coupled Eulerian and Lagrangian method

Springback analysis of different A-values of Cu and Al tubes in free bending forming technology: experimentation and finite element modeling

Influence of tool characteristics on white layer produced by cutting hardened steel and prediction of white layer thickness

Effect of microstructure on high-speed cutting modified anti-fatigue performance of Incoloy A286 and titanium alloy TC17

Machining of cylindrical parts by wire electrical discharge grinding using thin plate guide

Machining performance enhancement of deep micro drilling using electrochemical discharge machining under magnetohydrodynamic effect

Premium Partner

Marktübersichten