nach oben

Arabian Journal for Science and Engineering

Erschienen in:

02.01.2023 | Research Article-mechanical Engineering

The Dynamic Response of AuxHex and Star-Reentrant Honeycomb Cored Sandwich Panels Subject to Blast Loading

verfasst von: Ahsan Ul Haq, G. Gunashekar, Suresh Kumar Reddy Narala

Erschienen in: Arabian Journal for Science and Engineering | Ausgabe 9/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In order to balance the blast protective performance and lightweight property, sandwich panels with various geometries of core are being employed in the military armours and modern-day combat vehicles. Owing to the superior energy absorption capacity of auxetic-reentrant cellular structures, hybridizing auxetic cells with the regular hexagonal cells in the honeycomb core for the purpose of blast protection could be a promising method. Therefore, novel honeycomb cores with combined auxetic and hexagonal cells (AuxHex and Star-Reentrant) are designed for blast protection panel with an aim to enhance the blast performance by improving the energy absorption and minimizing the dynamic deflection of the back plate. Initially, the dynamic response of honeycomb sandwich panels with various regular geometrical cores is analysed and validated with the experimental results from the literature. Further, air blast analysis has been performed on AuxHex and Star-Reentrant honeycomb cored sandwich panel having same relative density as that of hexagonal honeycomb core under exactly same conditions. In addition to that, the study is extended for varying charges of TNT and at different stand-off distances. It has been revealed that the sandwich panel with AuxHex and Star-Reentrant core of same relative density as that of hexagonal honeycomb core absorbs 28% and 19.2% more amount of energy and experiences 17% and 8% less deflection, respectively, than those with regular hexagonal honeycomb core.

Vorheriger Artikel Exergetic Sustainability Analysis of a Naphtha-Based Combined Cycle Power Plant (CCPP)

Nächster Artikel The Experimental Assessment of Deformation and Springback Behavior for Additive Manufactured Ti6Al4V

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Meyers, M.A.: Dynamic Behavior of Materials. Wiley, Hoboken (1994)CrossRefMATH

Li, B.; Liu, Y.; Tan, K.-T.: A novel meta-lattice sandwich structure for dynamic load mitigation. J. Sandwich Struct. Mater. 21(6), 1880–1905 (2019)CrossRef

Chen, G.; Cheng, Y.; Zhang, P.; Liu, J.; Chen, C.; Cai, S.: Design and modelling of auxetic double arrowhead honeycomb core sandwich panels for performance improvement under air blast loading. J. Sandwich Struct. Mater. 23(8), 3574–3605 (2021)CrossRef

Sahu, S.K.; Badgayan, N.D.; Samanta, S.; Rama Sreekanth, P.S.: Evaluation of cell parameter variation on energy absorption characteristic of thermoplastic honeycomb sandwich structure. Arab. J. Sci. Eng. 46(12), 12487–12507 (2021)CrossRef

Haq, A.U.; Reddy, N.S.K.: A brief review on various high energy absorbing materials. Mater. Today Proc. 38, 3198–3204 (2021). https://doi.org/10.1016/j.matpr.2020.09.648CrossRef

Kangda, M.Z.; Bakre, S.: Positive-phase blast effects on base-isolated structures. Arab. J. Sci. Eng. 44(5), 4971–4992 (2019)CrossRef

Imbalzano, G.; Tran, P.; Ngo, T.D.; Lee, P.V.: Three-dimensional modelling of auxetic sandwich panels for localised impact resistance. J. Sandwich Struct. Mater. 19(3), 291–316 (2017)CrossRef

Garrido Silva, B.; Alves, F.; Sardinha, M.; Reis, L.; Leite, M.; Deus, A. M.; Vaz, M. F. Functionally graded cellular cores of sandwich panels fabricated by additive manufacturing. Proc. Inst. Mech. Eng. Part L J. Mater. Design Appl. 14644207221084611(2022)

Wang, T.; Qin, Q.; Wang, M.; Yu, W.; Wang, J.; Zhang, J.; Wang, T.J.: Blast response of geometrically asymmetric metal honeycomb sandwich plate: experimental and theoretical investigations. Int. J. Impact Eng. 105, 24–38 (2017)CrossRef

10.

Liu, J.; Wang, Z.; Hui, D.: Blast resistance and parametric study of sandwich structure consisting of honeycomb core filled with circular metallic tubes. Compos. B Eng. 145, 261–269 (2018)CrossRef

11.

Ashby, M.F.; Evans, T.; Fleck, N.A.; Hutchinson, J.W.; Wadley, H.N.G.; Gibson, L.J.: Metal Foams: A Design Guide. Elsevier, Amsterdam (2000)

12.

Ling, X.; Zhang, Y.F.; Wang, Y.Q.: Dynamic response of buried fluid-conveying pipelines subjected to blast loading using shell theory. Arab. J. Sci. Eng. 46(5), 4883–4893 (2021)CrossRef

13.

Tan, P.: Finite element simulation of the behaviours of laminated armour systems against blast wave and projectile dynamic impacts. Proc. Inst. Mech. Eng. Part L J. Mater. Design Appl. 227(1), 2–15 (2013)

14.

Sahu, S.K.; Rama Sreekanth, P.S.: Experimental investigation of in-plane compressive and damping behavior anisotropic graded honeycomb structure. Arab. J. Sci. Eng. 47(12), 15741–15753 (2022). https://doi.org/10.1007/s13369-022-06771-zCrossRef

15.

Sur, A.; Darvekar, S.; Shah, M.: Recent advancements of micro-lattice structures: application, manufacturing methods, mechanical properties, topologies and challenges. Arab. J. Sci. Eng. 46(12), 11587–11600 (2021)CrossRef

16.

Grujicic, M.; Yavari, R.; Snipes, J.S.; Ramaswami, S.: Use of aluminum foam core sandwich structures to improve the blast-mitigation performance of light tactical vehicle side-vent-channel solution. Proc. Inst. Mech. Eng. Part L J. Mater. Design Appl. 232(12), 993–1011 (2018)

17.

Yao, S.; Zhou, Y.; Li, Z.; Zhang, P.; Cao, Y.; Ping, X.: Energy absorption characteristics of square frustum lattice structure. Compos. Struct. 275, 114492 (2021). https://doi.org/10.1016/j.compstruct.2021.114492CrossRef

18.

Cai, S.; Zhang, P.; Dai, W.; Cheng, Y.; Liu, J.: Multi-objective optimization for designing metallic corrugated core sandwich panels under air blast loading. J. Sandwich Struct. Mater. 23(4), 1192–1220 (2021)CrossRef

19.

Li, Y.; Chen, Z.; Xiao, D.; Wenwang, Wu.; Fang, D.: The Dynamic response of shallow sandwich arch with auxetic metallic honeycomb core under localized impulsive loading. Int. J. Impact Eng 137, 103442 (2020)CrossRef

20.

Cong, P.H.; Quyet, P.K.; Duc, N.D.: Effects of lattice stiffeners and blast load on nonlinear dynamic response and vibration of auxetic honeycomb plates. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 235(23), 7192–7211 (2021). https://doi.org/10.1177/0954406221992797CrossRef

21.

Wang, L.; Saito, K.; Gotou, Y.; Okabe, Y.: Design and fabrication of aluminum honeycomb structures based on origami technology. J. Sandwich Struct. Mater. 21(4), 1224–1242 (2019)CrossRef

22.

Omidvar, H.; Azari, K.K.; Mohammad Taheri, A.; Saghafi, A.A.: Impact and ballistic behavior optimization of kevlar–epoxy composites by taguchi method. Arab. J. Sci. Eng. 38(5), 1161–1167 (2013). https://doi.org/10.1007/s13369-012-0381-4CrossRef

23.

Dharmasena, K.P.; Wadley, H.N.G.; Williams, K.; Xue, Z.; Hutchinson, J.W.: Response of metallic pyramidal lattice core sandwich panels to high intensity impulsive loading in air. Int. J. Impact Eng. 38(5), 275–289 (2011). https://doi.org/10.1016/j.ijimpeng.2010.10.002CrossRef

24.

Kang, K.-J.: Wire-woven cellular metals: the present and future. Prog. Mater Sci. 69, 213–307 (2015)CrossRef

25.

Huang, J.; Zhang, Q.; Scarpa, F.; Liu, Y.; Leng, J.: In-plane elasticity of a novel auxetic honeycomb design. Compos. B Eng. 110, 72–82 (2017)CrossRef

26.

Qi, C.; Pei, L.-Z.; Remennikov, A.; Yang, S.; Liu, J.; Wang, J.-S.; Liao, X.-W.: Parametric study and optimization of the protect system containing a re-entrant hexagon cored sandwich panel under blast impact. Compos. Struct. 252, 112711 (2020)CrossRef

27.

Lakes, R.: Foam structures with a negative Poisson’s ratio. Science 235(4792), 1038–1040 (1987)CrossRef

28.

Ingrole, A.; Hao, A.; Liang, R.: Design and modeling of auxetic and hybrid honeycomb structures for in-plane property enhancement. Mater. Des. 117, 72–83 (2017)CrossRef

29.

Yazdani Sarvestani, H.; Akbarzadeh, A.H.; Niknam, H.; Hermenean, K.: 3D printed architected polymeric sandwich panels: energy absorption and structural performance. Compos. Struct. 200, 886–909 (2018). https://doi.org/10.1016/j.compstruct.2018.04.002CrossRef

30.

Fu, M.-H.; Chen, Yu.; Ling-Ling, Hu.: A novel auxetic honeycomb with enhanced in-plane stiffness and buckling strength. Compos. Struct. 160, 574–585 (2017)CrossRef

31.

Del Broccolo, S.; Laurenzi, S.; Scarpa, F.: AUXHEX – A Kirigami inspired zero Poisson’s ratio cellular structure. Compos. Struct. 176, 433–441 (2017). https://doi.org/10.1016/j.compstruct.2017.05.050CrossRef

32.

Chen, G.; Cheng, Y.; Zhang, P.; Cai, S.; Liu, J.: Blast resistance of metallic double arrowhead honeycomb sandwich panels with different core configurations under the paper tube-guided air blast loading. Int. J. Mech. Sci. 201, 106457 (2021)CrossRef

33.

Kumar, S.; Vyavahare, S.; Teraiya, S.; Kootikuppala, J.; Bogala, H.: A state of the art review of additively manufactured auxetic structures. In: Dave, H.K.; Dixit, U.S.; Nedelcu, D. (Eds.) Recent Advances in Manufacturing Processes and Systems: Select Proceedings of RAM 2021, pp. 69–84. Springer Nature Singapore, Singapore (2022). https://doi.org/10.1007/978-981-16-7787-8_6CrossRef

34.

Aryal, B.; Morozov, E. V.; Shankar, K. Effects of ballistic impact damage on mechanical behaviour of composite honeycomb sandwich panels. J. Sandwich Struct. Mater. 1099636220909743 (2020)

35.

Rodriguez-Millan, M.; Garcia-Gonzalez, D.; Rusinek, A.; Arias, A.: Influence of stress state on the mechanical impact and deformation behaviors of aluminum alloys. Metals 8(7), 520 (2018)CrossRef

36.

Banerjee, A.; Dhar, S.; Acharyya, S.; Datta, D.; Nayak, N.: Determination of Johnson cook material and failure model constants and numerical modelling of Charpy impact test of armour steel. Mater. Sci. Eng., A 640, 200–209 (2015)CrossRef

37.

Ghazlan, A.; Ngo, T.; Le, V.T.; Nguyen, T.; Linforth, S.; Remennikov, A.; Whittaker, A.: A bio-mimetic cellular structure for mitigating the effects of impulsive loadings–a numerical study. J. Sandwich Struct. Mater. 23(6), 1929–1955 (2021)CrossRef

38.

Dharmasena, K.P.; Wadley, H.N.G.; Xue, Z.; Hutchinson, J.W.: Mechanical response of metallic honeycomb sandwich panel structures to high-intensity dynamic loading. Int. J. Impact Eng. 35(9), 1063–1074 (2008). https://doi.org/10.1016/j.ijimpeng.2007.06.008CrossRef

39.

Jin, X.; Wang, Z.; Ning, J.; Xiao, G.; Liu, E.; Shu, X.: Dynamic response of sandwich structures with graded auxetic honeycomb cores under blast loading. Compos. B Eng. 106, 206–217 (2016)CrossRef

40.

Wang, Y.; Yi, Yu.; Wang, C.; Zhou, G.; Karamoozian, A.; Zhao, W.: On the out-of-plane ballistic performances of hexagonal, reentrant, square, triangular and circular honeycomb panels. Int. J. Mech. Sci. 173, 105402 (2020)CrossRef

41.

Acosta, P.F.: Overview of UFC 3-340-02 structures to resist the effects of accidental explosions. Struct. Congr. 2011, 1454–1469 (2011)

42.

Xu, M.; Ziran, Xu.; Zhang, Z.; Lei, H.; Bai, Y.; Fang, D.: Mechanical properties and energy absorption capability of AuxHex structure under in-plane compression: theoretical and experimental studies. Int. J. Mech. Sci. 159, 43–57 (2019)CrossRef

43.

Li, X.; Zhang, P.; Wang, Z.; Guiying, Wu.; Zhao, L.: Dynamic behavior of aluminum honeycomb sandwich panels under air blast: experiment and numerical analysis. Compos. Struct. 108, 1001–1008 (2014)CrossRef

44.

Roudbeneh, F.H.; Liaghat, G.; Sabouri, H.; Hadavinia, H.: Experimental investigation of impact loading on honeycomb sandwich panels filled with foam. Int. J. Crashworthiness 24(2), 199–210 (2019). https://doi.org/10.1080/13588265.2018.1426233CrossRef

45.

Yang, L.; Li, X.; Zi, F.; Yang, S.; Zhang, Z.; Jia, Q.; Dong, Y.; Linzhi, Wu.: Dynamic response of graded PVC foam sandwich panel under air blast loads. Mech. Adv. Mater. Struct. 29(25), 3694–3708 (2021). https://doi.org/10.1080/15376494.2021.1909190CrossRef

46.

Xue, Z.; Hutchinson, J.W.: Crush dynamics of square honeycomb sandwich cores. Int. J. Numer. Meth. Eng. 65(13), 2221–2245 (2006)CrossRefMATH

47.

Wadley, H.N.G.; Børvik, T.; Olovsson, L.; Wetzel, J.J.; Dharmasena, K.P.; Hopperstad, O.S.; Deshpande, V.S.; Hutchinson, J.W.: Deformation and fracture of impulsively loaded sandwich panels. J. Mech. Phys. Solids 61(2), 674–699 (2013). https://doi.org/10.1016/j.jmps.2012.07.007CrossRef

Titel: The Dynamic Response of AuxHex and Star-Reentrant Honeycomb Cored Sandwich Panels Subject to Blast Loading
verfasst von: Ahsan Ul Haq
G. Gunashekar
Suresh Kumar Reddy Narala
Publikationsdatum: 02.01.2023
Verlag: Springer Berlin Heidelberg
Erschienen in: Arabian Journal for Science and Engineering / Ausgabe 9/2023
Print ISSN: 2193-567X
Elektronische ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-022-07564-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9/2023

Thermodynamic Analysis of a Reconfigured 500-MWe Supercritical Thermal Power Plant by Integrating Solid Oxide Fuel Cell and a Gas Turbine

Utilizing the Wasted Heat From the Secondary Reflector of Linear Fresnel Solar System by Installing Thermoelectric Generator Modules and Reheating the Working Fluid

Numerical Investigation of Magnetohydrodynamic Forced Convection and Entropy Production of Ferrofluid Around a Confined Cylinder Using Wire Magnetic Sources

Bubble Column Dehumidification for Sweeping Air Membrane Distillation

An Analysis of Machining Response Parameters, Crystalline Structures, and Surface Topography During EDM of Die-Steel Using EDM Oil and Liquid-Based Viscous Dielectrics: A Comparative Analysis of Machining Performance

Experimental Study on Stick–Slip Vibration Characteristics of Drillstring-Bit-Rock Coupling System in Horizontal Well

Premium Partner

Marktübersichten