nach oben

Physics of Metals and Metallography

Erschienen in:

01.03.2022 | ELECTRICAL AND MAGNETIC PROPERTIES

The Effect of Selective Laser Melting Conditions on the Structure of an Alnico Alloy

Erschienen in: Physics of Metals and Metallography | Ausgabe 3/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The effect of main parameters of the selective laser melting (SLM) process on the structure and properties of permanent magnets made from an Alnico alloy is studied. Series of samples were prepared using various combinations of SLM conditions and spherical powder particles of an Alnico alloy prepared by melt spraying. A suitable range of manufacturing parameters is determined, which allows us to fabricate permanent magnets with an optimum structure. Conclusions about the effect of the main parameters of the SLM process on the surface morphology of the deposited alloy are inferred. The optimization of scanning conditions allows us to decrease the cracking and, therefore, to reach a high level of physical and mechanical properties of Alnico alloy samples.

Vorheriger Artikel Structure, Magnetic and Magnetoresistance Properties of Co62Fe5Ni4Si15B14 Amorphous Ribbons

Nächster Artikel Topologically Nontrivial Spin Textures in Thin Magnetic Films

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

J. Jaćimović, F. Binda, L. G. Herrmann, F. Greuter, J. Genta, M. Calvo, T. Tomše, and R. A. Simon, “Net shape 3D printed NdFeB permanent magnet,” Adv. Eng. Mater. 19, 1700098 (2017). https://doi.org/10.1002/adem.201700098CrossRef

A. S. Zhukov, B. K. Barakhtin, V. V. Bobyr, P. A. Kuznetsov, and I. V. Shakirov, “The experience of magnets manufacturing from metal powder using a laser,” J. Phys. Conf. Ser. 1791, 012122 (2021).CrossRef

F. Bittner, J. Thielsch, and W. G. Drosse, “Laser powder bed fusion of Nd–Fe–B permanent magnets,” Prog. Addit. Manuf. 5, 3–9 (2020). https://doi.org/10.1007/s40964-020-00117-7CrossRef

V. Chaudhary, S. A. Mantri, R. V. Ramanujan, and R. Banerjee, “Additive manufacturing of magnetic materials,” Prog. Mater. Sci. 114, 100688 (2020). ISSN 0079-6425. https://doi.org/10.1016/j.pmatsci.2020.100688

E. A. Périgo, J. Jacimovic, F. García Ferré, and L. M. Scherf, “Additive manufacturing of magnetic materials,” Addit. Manuf. 30, 100870 (2019). https://doi.org/10.1016/j.addma.2019.100870CrossRef

A. B. Baldissera, P. Pavez, P. A. P. Wendhausen, C. H. Ahrens, and J. M. Mascheroni, “Additive manufacturing of bonded Nd–Fe–B–effect of process parameters on magnetic properties,” IEEE Trans Magn. 53, 1–4 (2017). https://doi.org/10.1109/TMAG.2017.2715722CrossRef

L. Li, A. Tirado, I. C. Nlebedim, O. Rios, B. Post, V. Kunc, R. R. Lowden, E. Lara-Curzio, R. Fredette, J. Ormerod, T. A. Lograsso, and M. P. Paranthaman, “Big area additive manufacturing of high performance bonded NdFeB magnets,” Sci. Rep. 6, 36212 (2016).CrossRef

T. Kolb, F. Huber, B. Akbulut, C. Donocik, N. Urban, D. Maurer, and J. Franke, “Laser beam melting of NdFeB for the production of reare-earth magnets,” Proc. EDCP Conf. (2016). https://doi.org/10.1109/EDPC.2016.7851311

C. Huber, H. Sepehri-Amin, M. Goertler, M. Groenefeld, Iu. Teliban, K. Hono, and D. Suess, “Coercivity enhancement of selective laser sintered NdFeB magnets by grain boundary infiltration,” Acta Mater. 172, 66–71 (2019). https://doi.org/10.1016/j.actamat.2019.04.037CrossRef

10.

D. Goll, D. Vogelgsang, U. Pflanz, D. Hohs, T. Grubesa, J. Schurr, T. Bernthaler, D. Kolb, H. Riegel, and G. Schneider, “Refining the microstructure of Fe–Nd–B by selective laser melting,” Phys. Status Solidi 13, 1800536 (2019). https://doi.org/10.1002/pssr.201800536CrossRef

11.

N. Urban, A. Meyer, S. Kreitlein, F. Leicht, and J. Franke, “Efficient near net-shape production of high energy rare earth magnets by laser beam melting,” Appl. Mech. Mater. 871, 137–144 (2017). https://doi.org/10.4028/www.scientific.net/AMM.871.137CrossRef

12.

A. S. Volegov, S. V. Andreev, N. V. Selezneva, I. A. Ryzhikhin, N. V. Kudrevatykh, L. Mädler, and I. V. Okulov, “Additive manufacturing of heavy rare earth free high-coercivity permanent magnets,” Acta Mater. 188, 733–739 (2020). https://doi.org/10.1016/j.actamat.2020.02.058CrossRef

13.

C. Huber, G. Mitteramskogler, M. Goertler, Iu. Teliban, M. Groenefeld, and D. Suess, “Additive manufactured polymer-bonded isotropic ndfeb magnets by stereolithography and their comparison to fused filament fabricated and selective laser sintered magnets,” Materials 13, 1916 (2020). https://www.mdpi.com/1996-1944/ 13/8/1916.CrossRef

14.

E. White, E. Rinko, T. Prost, T. Horn, C. Ledford, C. Rock, and I. Anderson, “Processing of alnico magnets by additive manufacturing,” Appl. Sci. 9, 4843 (2019). https://doi.org/10.3390/app9224843CrossRef

15.

I. A. Radulov, V. V. Popov, A. Koptyug, F. Maccari, A. Kovalevsky, S. Essel, J. Gassmann, K. P. Skokov, and M. Bamberger, “Production of net-shape Mn–Al permanent magnets by electron beam melting,” Addit. Manuf. 30, 100787 (2019). https://doi.org/10.1016/j.addma.2019.100787CrossRef

16.

M. S. K. K. Y. Nartu, S. Dasari, A. Sharma, V. Chaudhary, S. M. Varahabhatla, S. A. Mantri, E. Ivanov, R. V. Ramanujan, N. B. Dahotre, and R. Banerjee, “Reducing coercivity by chemical ordering in additively manufactured soft magnetic Fe–Co (Hiperco) alloys,” J. Alloys Compd. 861, 157998 (2021). https://doi.org/10.1016/j.jallcom.2020.157998CrossRef

17.

V. Chaudhary, N. M. S. K. K. Yadav, S. A. Mantri, S. Dasari, A. Jagetia, R. V. Ramanujan, and R. Banerjee, “Additive manufacturing of functionally graded Co–Fe and Ni–Fe magnetic materials,” J. Alloys Compd. 823, 153817 (2020). https://doi.org/10.1016/j.jallcom.2020.153817CrossRef

18.

E. M. H. White, A. G. Kassen, E. Simsek, W. Tang, R. T. Ott, and I. E. Anderson, “Net shape processing of alnico magnets by additive manufacturing,” IEEE Trans. Magn. 53, No. 11, 2101606 (2017).CrossRef

19.

R. Skomski, P. Manchanda, P. Kumar, B. Balamurugan, A. Kashyap, and D. J. Sellmyer, “Predicting the future of permanent-magnet materials,” IEEE Trans. Magn. 49, No. 7, 3215–3220 (2013). https://doi.org/10.1109/TMAG.2013.2248139CrossRef

20.

P. F. Rottmann, A. T. Polonsky, T. Francis, M. G. Emigh, M. Krispin, G. Rieger, McL. P. Echlin, C. G. Levi, and T. M. Pollock, “TriBeam tomography and microstructure evolution in additively manufactured Alnico magnets,” Mater. Today 49, 23–34 (2021). https://doi.org/10.1016/j.mattod.2021.05.003CrossRef

21.

L. Zhou, M. K. Miller, Lu. Ping, Ke. Liqin, R. Skomski, H. Dillon, Q. Xing, A. Palasyuk, M. R. McCartney, D. J. Smith, S. Constantinides, R. W. McCallum, I. E. Anderson, V. Antropov, and M. J. Kramer, “Architecture and magnetism of alnico,” Acta Mater. 74, 224–233 (2014). ISSN 1359-6454. https://doi.org/10.1016/j.actamat.2014.04.044

22.

P. A. Kuznetsov, I. V. Shakirov, A. S. Zukov, V. V. Bobyr’, and M. V. Starytsin, “Effect of particle size distribution on the structure and mechanical properties in the process of laser powder bed fusion,” J. Phys: Conf. Ser. 1758, 012021 (2021).

23.

V. Bobyr, A. Zhukov, I. Shakirov, and P. Kuznetsov, “Selection of the selective laser melting modes—As the method of achieving an item’s complex shape with the specified physical and mechanical properties,” Mater. Today: Proc. 19, 2129–2133 (2019).

24.

P. Kuznetsov, I. Shakirov, A. Mozhayko, A. Zhukov, and V. Bobyr, “Comparison of sequential and circular scanning thermal fields and their influence on microstructure of Alnico alloy produced by laser powder bed fusion,” J. Phys.: Conf. Ser. 1967, 012064 (2021).

Titel: The Effect of Selective Laser Melting Conditions on the Structure of an Alnico Alloy
Publikationsdatum: 01.03.2022
Erschienen in: Physics of Metals and Metallography / Ausgabe 3/2022
Print ISSN: 0031-918X
Elektronische ISSN: 1555-6190
DOI: https://doi.org/10.1134/S0031918X22030103

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2022

Influence of the Anisotropy of Magnetic Films on the Detection of Magnetoelastic Fields upon Excitation by an Amplitude-Modulated Magnetic Field

Studying the Effect of Strong Magnetic Fields on the Phase Transitions of the Frustrated Potts Model with a Number of Spin States q = 4

Noncollinear Magnetic Structures in Charge-Ordered Pseudo-Perovskite Manganites

Influence of the Parameters of a Control Magnetic Field Pulse on Domain Wall Dynamics

Spin Currents and Nonlinear Dynamics of Vortex Spin Torque Nano-Oscillators

The Shape of Electron Paramagnetic Resonance Lines of Pr0.7Ca0.15Ba0.15MnO3 Manganite