Transient Liquid Phase Bonding Single-Crystal Superalloys with Orientation Deviations: Creep Properties

Superalloys single crystals with various orientation deviations were bonded using transient liquid phase bonding method, then the creep properties of the bonded specimens were tested at 1033 K (760 °C)/780 MPa. It is found that the creep life of the bonded specimens decreases with the increase of the relative orientation deviations. Despite the fracture of the specimens appears on the bonding region, the deformation mechanism changes from specimens with low angle boundary to high angle boundary. In low angle boundary specimens, cleavage originated from the defects grows perpendicularly to the tensile stress and connects through the different slip planes around the cleavage planes. In this case, the deformation proceeds by the dislocations and stacking faults on multi-planes. With increasing orientation deviation, dislocation and stacking faults moved on single plane. As a result, the dislocations interact with the grain boundary and lead to fracture. Based on the present investigation, the orientation of the bonded superalloys single crystal should be controlled so that the introduced grain boundaries are relatively small and exhibit higher creep strength.