nach oben

Erschienen in:

2021 | OriginalPaper | Buchkapitel

Tribological Study on Titanium Based Composite Materials in Biomedical Applications

verfasst von : S. Shankar, R. Nithyaprakash, G. Abbas

Erschienen in: Tribological Applications of Composite Materials

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Titanium (Ti) and titanium based alloy (Ti6Al4V) are known for its high strength, high stiffness, resistance to corrosion and biocompatibility. The mechanical properties as well as bio-compatibility of titanium lead to wide variety of applications in biomedical, environmental, aerospace, automotive and marine applications. The titanium based composites are widely preferred at present to enhance the wear, friction and corrosion behavior based on applications where it is used. Moreover, titanium based bio-composites are widely preferred in biomedical applications because of its improved friction and wear resistance properties. The present chapter emphasizes more on tribological study of titanium based composites in general and also titanium based bio-composites in hip joint replacement on biomedical applications. At the same time, the focus is also given to classify various coating techniques used to produce the titanium composites and parameters used to analyze the tribological behavior of titanium composites. This chapter also deals with approaches used to test with and without bio-lubricant, tribological and corrosion properties of titanium composites.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Influence of Surface Modification on Tribological Properties of Elastomer Composites

Nächstes Kapitel The Effect of Fillers on the Tribological Properties of Composites

Adeleke S, Bushroa A, Sopyan I (2017) Recent development of calcium phosphate-based coatings on titanium alloy implants. Surf Eng Appl Electrochem 53(5):419–433CrossRef

An Q, Huang L, Bao Y, Zhang R, Jiang S, Geng L, Xiao M (2018) Dry sliding wear characteristics of in-situ TiBw/Ti6Al4V composites with different network parameters. Tribol Int 121:252–259CrossRef

Attar H, Calin M, Zhang L, Scudino S, Eckert J (2014) Manufacture by selective laser melting and mechanical behavior of commercially pure titanium. Mater Sci Eng, A 593:170–177CrossRef

Attar H, Ehtemam-Haghighi S, Kent D, Dargusch MS (2018) Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: a review. Int J Mach Tools Manuf 133:85–102CrossRef

Bai M, Namus R, Xu Y, Guan D, Rainforth MW, Inkson BJ (2019) In-situ Ti-6Al-4V/TiC composites synthesized by reactive spark plasma sintering: Processing, microstructure, and dry sliding wear behaviour. Wear 202944

Bandyopadhyay A, Dittrick S, Gualtieri T, Wu J, Bose S (2016) Calcium phosphate–titanium composites for articulating surfaces of load-bearing implants. J Mech Behav Biomed Mater 57:280–288CrossRef

Bao Y, Huang L, An Q, Jiang S, Geng L, Ma X (2018) Wire-feed deposition TiB reinforced Ti composite coating: formation mechanism and tribological properties. Mater Lett 229:221–224CrossRef

Berndt C, Hasan F, Tietz U, Schmitz K-P (2014) A review of hydroxyapatite coatings manufactured by thermal spray. In: Advances in calcium phosphate biomaterials. Springer, Berlin, pp 267–329

Brown SS, Clarke IC (2006) A review of lubrication conditions for wear simulation in artificial hip replacements. Tribol Trans 49(1):72–78CrossRef

Cai X, Li J, Liu Y, Yan Z, Tan X, Liu S, Zeng G, Gu Y, Hu X, Jiang L (2018) Titanium dioxide-coated biochar composites as adsorptive and photocatalytic degradation materials for the removal of aqueous organic pollutants. J Chem Technol Biotechnol 93(3):783–791CrossRef

Candel J, Amigó V, Ramos J, Busquets D (2010) Sliding wear resistance of TiCp reinforced titanium composite coating produced by laser cladding. Surf Coat Technol 204(20):3161–3166CrossRef

Çelik ON (2013) Microstructure and wear properties of WC particle reinforced composite coating on Ti6Al4V alloy produced by the plasma transferred arc method. Appl Surf Sci 274:334–340CrossRef

Chen Y, Wang X, Xu L, Liu Z, Do Woo K (2012) Tribological behavior study on Ti–Nb–Sn/hydroxyapatite composites in simulated body fluid solution. J Mech Behav Biomed Mater 10:97–107CrossRef

Dang W, Ren S, Zhou J, Yu Y, Wang L (2016) The tribological properties of Ti3SiC2/Cu/Al/SiC composite at elevated temperatures. Tribol Int 104:294–302CrossRef

Dong Y, Wang H (2009) Microstructure and dry sliding wear resistance of laser clad TiC reinforced Ti–Ni–Si intermetallic composite coating. Surf Coat Technol 204(5):731–735CrossRef

Farnoush H, Bastami AA, Sadeghi A, Mohandesi JA, Moztarzadeh F (2013) Tribological and corrosion behavior of friction stir processed Ti-CaP nanocomposites in simulated body fluid solution. J Mech Behav Biomed Mater 20:90–97CrossRef

Fathi M, Zahrani EM (2009) Fabrication and characterization of fluoridated hydroxyapatite nanopowders via mechanical alloying. J Alloy Compd 475(1–2):408–414CrossRef

Feng S, Tang H, Zhang S, Wang H (2012) Microstructure and wear resistance of laser clad TiB–TiC/TiNi–Ti2Ni intermetallic coating on titanium alloy. Trans Nonferrous Met Soc China 22(7):1667–1673CrossRef

Geetha M, Singh AK, Asokamani R, Gogia AK (2009) Ti based biomaterials, the ultimate choice for orthopaedic implants—a review. Prog Mater Sci 54(3):397–425CrossRef

Geng L, Ni D, Zhang J, Zheng Z (2008) Hybrid effect of TiBw and TiCp on tensile properties of in situ titanium matrix composites. J Alloy Compd 463(1–2):488–492CrossRef

Guo B, Zhou J, Zhang S, Zhou H, Pu Y, Chen J (2007) Phase composition and tribological properties of Ti–Al coatings produced on pure Ti by laser cladding. Appl Surf Sci 253(24):9301–9310CrossRef

Guo B, Wang Z, Li H (2016) Study on the friction and wear behavior of a TA15 alloy and Its Ni-SiC composite coating. J Mater Eng Perform 25(5):1763–1772CrossRef

Hibi Y, Miyake K, Murakami T, Sasaki S (2006) Tribological behavior of SiC-reinforced Ti3SiC2-based composites under dry condition and under lubricated condition with water and ethanol. J Am Ceram Soc 89(9):2983–2985

Hou T, Wang B, Ma M, Feng A, Huang Z, Zhang Y, Jia Z, Tan G, Cao H, Wu G (2020) Preparation of two-dimensional titanium carbide (Ti3C2Tx) and NiCo2O4 composites to achieve excellent microwave absorption properties. Compos B Eng 180:107577CrossRef

Hu W, Xu J, Lu X, Hu D, Tao H, Munroe P, Xie Z-H (2016) Corrosion and wear behaviours of a reactive-sputter-deposited Ta2O5 nanoceramic coating. Appl Surf Sci 368:177–190CrossRef

Jiang S, Wang G, Ren Q, Yang C, Wang Z, Zhou Z (2015) In situ synthesis of Fe-based alloy clad coatings containing TiB 2–TiN–(h-BN). Int J Miner Metall Mater 22(6):613–619CrossRef

Jin X, Gao L, Liu E, Yu F, Shu X, Wang H (2015) Microstructure, corrosion and tribological and antibacterial properties of Ti–Cu coated stainless steel. J Mech Behav Biomed Mater 50:23–32CrossRef

Khorasani AM, Goldberg M, Doeven EH, Littlefair G (2015) Titanium in biomedical applications—properties and fabrication: a review. J Biomater Tissue Eng 5(8):593–619CrossRef

Khun N, Li R, Khor K (2015) Mechanical and tribological properties of spark plasma–sintered titanium composites filled with different Al-Cr-Fe quasicrystal contents. Tribol Trans 58(5):859–866CrossRef

Khun NW, Tan AWY, Liu E (2016) Mechanical and tribological properties of cold-sprayed Ti coatings on Ti-6Al-4V substrates. J Therm Spray Technol 25(4):715–724CrossRef

Kilicli V, Yan X, Salowitz N, Rohatgi PK (2018) Recent advancements in self-healing metallic materials and self-healing metal matrix composites. JOM 70(6):846–854CrossRef

Kim I, Choi B, Kim Y, Lee Y (2011) Friction and wear behavior of titanium matrix (TiB+ TiC) composites. Wear 271(9–10):1962–1965CrossRef

Kim J-S, Lee K-M, Cho D-H, Lee Y-Z (2013) Fretting wear characteristics of titanium matrix composites reinforced by titanium boride and titanium carbide particulates. Wear 301(1–2):562–568CrossRef

Lee C (2012) Wear and corrosion behavior of electrodeposited nickel–carbon nanotube composite coatings on Ti–6Al–4V alloy in Hanks’ solution. Tribol Int 55:7–14CrossRef

Lee C, Sanders A, Tikekar N, Chandran KR (2008) Tribology of titanium boride-coated titanium balls against alumina ceramic: wear, friction, and micromechanisms. Wear 265(3–4):375–386CrossRef

Li J, Yu Z, Wang H, Li M (2010) Microstructural evolution of titanium matrix composite coatings reinforced by in situ synthesized TiB and TiC by laser cladding. Int J Miner Metall Mater 17(4):481–488CrossRef

Li J, Yu Z, Wang H (2011) Wear behaviors of an (TiB+ TiC)/Ti composite coating fabricated on Ti6Al4V by laser cladding. Thin Solid Films 519(15):4804–4808CrossRef

Li J, Yu ZS, Wang HP (2011b) Effects of Y2O3 on microstructure and mechanical properties of laser clad coatings reinforced by in situ synthesized TiB and TiC. Mater Sci For 589–592

Li J, Yu Z, Wang H, Li M (2012) Microstructure and mechanical properties of an in situ synthesized TiB and TiC reinforced titanium matrix composite coating. J Wuhan Univ Technol-Mater Sci Ed 27(1):1–8CrossRef

Li X, Tang B, Ye J (2012) Fabrication of Zr and Zr–N surface alloying layers and hardness improvement of Ti–6Al–4V alloy by plasma surface alloying technique. Appl Surf Sci 258(6):1981–1984CrossRef

Li X, Shi T, Zhang C, Li S, Zhang J, Zhang L-C (2018) Improved wear resistance and mechanism of titanium aluminum based alloys reinforced by solid lubricant materials. Mater Res Exp 5(8):086502CrossRef

Liang H, Shi B, Fairchild A, Cale T (2004) Applications of plasma coatings in artificial joints: an overview. Vacuum 73(3–4):317–326CrossRef

Lin Y, Lei Y, Fu H, Lin J (2015) Mechanical properties and toughening mechanism of TiB2/NiTi reinforced titanium matrix composite coating by laser cladding. Mater Des 80:82–88CrossRef

Liu S, Liu Z, Wang Y, Yue P (2014) Ti-based composite coatings with gradient TiCx reinforcements on TC4 titanium alloy prepared by laser cladding. Sci China Technol Sci 57(7):1454–1461CrossRef

Liu X-B, Meng X-J, Liu H-Q, Shi G-L, Wu S-H, Sun C-F, Wang M-D, Qi L-H (2014) Development and characterization of laser clad high temperature self-lubricating wear resistant composite coatings on Ti–6Al–4V alloy. Mater Des 55:404–409CrossRef

Liu Y-F, Zhou Y-L, Zhang Q, Pu F, Li R-H, Yang S-Z (2014) Microstructure and dry sliding wear behavior of plasma transferred arc clad Ti5Si3 reinforced intermetallic composite coatings. J Alloy Compd 591:251–258CrossRef

Lu X-L, Liu X-B, Yu P-C, Qiao S-J, Zhai Y-J, Wang M-D, Chen Y, Xu D (2016) Synthesis and characterization of Ni60-hBN high temperature self-lubricating anti-wear composite coatings on Ti6Al4V alloy by laser cladding. Opt Laser Technol 78:87–94CrossRef

Luo Y, Yang L, Tian M (2013) Influence of bio-lubricants on the tribological properties of Ti6Al4V alloy. J Bionic Eng 10(1):84–89CrossRef

Luo S, Song T, Liu B, Tian J, Qian M (2019) Recent advances in the design and fabrication of strong and ductile (tensile) titanium metal matrix composites. Adv Eng Mater 1801331

Mishra A, Khobragade N, Sikdar K, Chakraborty S, Kumar SB, Roy D (2017) Study of mechanical and tribological properties of nanomica dispersed hydroxyapatite based composites for biomedical applications. Adv Mater Sci Eng 2017

Mu M, Zhou X, Xiao Q, Liang J, Huo X (2012) Preparation and tribological properties of self-lubricating TiO2/graphite composite coating on Ti6Al4V alloy. Appl Surf Sci 258(22):8570–8576CrossRef

Nag S, Paital SR, Nandawana P, Mahdak K, Ho YH, Vora HD, Banerjee R, Dahotre NB (2013) Laser deposited biocompatible Ca–P coatings on Ti–6Al–4V: microstructural evolution and thermal modeling. Mater Sci Eng, C 33(1):165–173CrossRef

Narayanan R, Seshadri S, Kwon T, Kim K (2008) Calcium phosphate-based coatings on titanium and its alloys. J Biomed Mater Res Part B: Appl Biomater: Off J Soc Biomater Jpn Soc Biomater Austr Soc Biomater Korean Soc Biomater 85(1):279–299CrossRef

Niespodziana K, Jurczyk K, Jakubowicz J, Jurczyk M (2010) Fabrication and properties of titanium–hydroxyapatite nanocomposites. Mater Chem Phys 123(1):160–165CrossRef

Obadele BA, Andrews A, Olubambi PA, Mathew MT, Pityana S (2015) Tribocorrosion response of laser clad TiNiZrO2 composite coatings on Ti6Al4V. Mater Sci For 345–350

Okulov I, Kühn U, Marr T, Freudenberger J, Soldatov I, Schultz L, Oertel C-G, Skrotzki W, Eckert J (2014) Microstructure and mechanical properties of new composite structured Ti–V–Al–Cu–Ni alloys for spring applications. Mater Sci Eng, A 603:76–83CrossRef

Peng D-X, Kang Y, Huang Y-J (2014) Microstructure and tribological properties of gas tungsten arc clad TiC composite coatings on carbon steel. Ind Lubr Tribol 66(5):609–617CrossRef

Prem Ananth M, Ramesh R (2014) Tribological improvement of titanium alloy surfaces through texturing and TiAlN coating. Surf Eng 30(10):758–762CrossRef

Qin Y, Geng L, Ni D (2011) Dry sliding wear behavior of extruded titanium matrix composite reinforced by in situ TiB whisker and TiC particle. J Mater Sci 46(14):4980–4985CrossRef

Que W, Khor KA, Xu J, Yu L (2008) Hydroxyapatite/titania nanocomposites derived by combining high-energy ball milling with spark plasma sintering processes. J Eur Ceram Soc 28(16):3083–3090CrossRef

Rahmati R, Khodabakhshi F (2018) Microstructural evolution and mechanical properties of a friction-stir processed Ti-hydroxyapatite (HA) nanocomposite. J Mech Behav Biomed Mater 88:127–139CrossRef

Rao RR, Kannan T (2002) Synthesis and sintering of hydroxyapatite–zirconia composites. Mater Sci Eng, C 20(1–2):187–193

Rathore A (2015) Development of hydroxyapatite-titania composite for implant application

Razak D, Syahrullail S, Sapawe N, Azli Y, Nuraliza N (2015) A new approach using palm olein, palm kernel oil, and palm fatty acid distillate as alternative biolubricants: improving tribology in metal-on-metal contact. Tribol Trans 58(3):511–517CrossRef

Rosu RA, Serban V-A, Bucur AI, Dragos U (2012) Deposition of titanium nitride and hydroxyapatite-based biocompatible composite by reactive plasma spraying. Appl Surf Sci 258(8):3871–3876CrossRef

Roy M, Krishna BV, Bandyopadhyay A, Bose S (2008) Laser processing of bioactive tricalcium phosphate coating on titanium for load-bearing implants. Acta Biomater 4(2):324–333CrossRef

Saba F, Zhang F, Liu S, Liu T (2018) Tribological properties, thermal conductivity and corrosion resistance of titanium/nanodiamond nanocomposites. Compos Commun 10:57–63CrossRef

Scholes SC, Colledge CJ, Naylor A, Mahdi MH, Smith AM, Joyce TJ (2016) Potential synthetic biolubricant as an alternative to bovine serum. Lubricants 4(4):38CrossRef

Selva Kumar M, Chandrasekar P, Chandramohan P, Mohanraj M (2012) Characterisation of titanium-titanium boride composites processed by powder metallurgy techniques. Mater Charact 73 (Complete)

Shahadat M, Ahmad A, Bushra R, Ismail S, Ahammad SZ, Ali SW, Rafatullah M (2020) Recent advancement in wastewater decontamination technology. In: Modern age waste water problems. Springer, Berlin, pp 1–22

Shi X, Xu Z, Wang M, Zhai W, Yao J, Song S, ud Din AQ, Zhang Q (2013) Tribological behavior of TiAl matrix self-lubricating composites containing silver from 25 to 800 C. Wear 303(1-2):486–494

Silva VV, Domingues RZ, Lameiras FS (2001) Microstructural and mechanical study of zirconia-hydroxyapatite (ZH) composite ceramics for biomedical applications. Compos Sci Technol 61(2):301–310CrossRef

Silva J, Alves AMVCP, Pinto A, Silva FS, Toptan F (2016) Dry sliding wear behaviour of Ti-TiB-TiNx in-situ composite synthesised by reactive hot pressing. Int J Surf Sci Eng 10(4):317–329CrossRef

Suthar J, Patel K (2018) Processing issues, machining, and applications of aluminum metal matrix composites. Mater Manuf Processes 33(5):499–527CrossRef

Szcześ A, Hołysz L, Chibowski E (2017) Synthesis of hydroxyapatite for biomedical applications. Adv Coll Interface Sci 249:321–330CrossRef

Tian Y, Chen C, Chen L, Huo Q (2005) Wear and oxidation resistance of composite coatings fabricated on Ti-6Al-4V by laser alloying with nitrogen and silicon. J Phys D Appl Phys 38(23):4217CrossRef

Tian Y, Chen C, Wang D, Huo Q, Lei T (2005) Microstructure and wear properties of composite coatings produced by laser cladding of Ti-6Al-4V with graphite and silicon mixed powders. Surf Rev Lett 12(02):161–165CrossRef

Tkachenko S, Datskevich O, Kulak L, Engqvist H, Persson C (2013) Tribological properties of Ti-Si-Zr alloys. In: 22nd conference on metallurgy and materials, METAL 2013, pp 15–17

Tkachenko S, Nečas D, Datskevich O, Čupera J, Spotz Z, Vrbka M, Kulak L, Foret R (2014) Tribological behavior of Ti–Si based in situ composites under sliding

Umeda J, Fugetsu B, Nishida E, Miyaji H, Kondoh K (2015) Friction behavior of network-structured CNT coating on pure titanium plate. Appl Surf Sci 357:721–727CrossRef

Wang Y, Wang H (2004) Wear resistance of laser clad Ti2Ni3Si reinforced intermetallic composite coatings on titanium alloy. Appl Surf Sci 229(1–4):81–86CrossRef

Wang H, Shu X, Liu E, Han Z, Li X, Tang B (2014) Assessments on corrosion, tribological and impact fatigue performance of Ti-and TiN-coated stainless steels by plasma surface alloying technique. Surf Coat Technol 239:123–131CrossRef

Wang S, Zhao Q, Liu D, Du N (2015) Microstructure and elevated temperature tribological behavior of TiO2/Al2O3 composite ceramic coating formed by microarc oxidation of Ti6Al4V alloy. Surf Coat Technol 272:343–349CrossRef

Wang L, Cheng J, Zhu S, Yu Y, Qiao Z, Yang J, Liu W (2017) High temperature wear behaviors of TiAl–TiB2 composites. Tribol Lett 65(4):144CrossRef

Wang D, Sun D, Han X, Wang Q, Wang G (2018) Investigation on tribological properties of the pre-oxidized Ti2 AlN/TiAl composite. J Mater Eng Perform 27(4):1973–1986CrossRef

Williams D (1987) Tissue-biomaterial interactions. J Mater Sci 22(10):3421–3445CrossRef

Xiang Z-F, Liu X-B, Ren J, Luo J, Shi S-H, Chen Y, Shi G-L, Wu S-H (2014) Investigation of laser cladding high temperature anti-wear composite coatings on Ti6Al4V alloy with the addition of self-lubricant CaF2. Appl Surf Sci 313:243–250CrossRef

Xu J, Liu L, Xie Z-H, Munroe P (2012) Nanocomposite bilayer film for resisting wear and corrosion damage of a Ti–6Al–4V alloy. Surf Coat Technol 206(19–20):4156–4165CrossRef

Xu J, Liu L, Jiang L, Munroe P, Xie Z-H (2013) Unraveling the mechanical and tribological properties of a novel Ti5Si3/TiC nanocomposite coating synthesized by a double glow discharge plasma technique. Ceram Int 39(8):9471–9481CrossRef

Xu Z, Chen L, Shi X, Zhang Q, Ibrahim AMM, Zhai W, Yao J, Zhu Q, Xiao Y (2015) Formation of friction layers in graphene-reinforced TiAl matrix self-lubricating composites. Tribol Trans 58(4):668–678CrossRef

Xu Z, Xue B, Shi X, Zhang Q, Zhai W, Yao J, Wang Y (2015) Sliding speed and load dependence of tribological properties of Ti3SiC2/TiAl composite. Tribol Trans 58(1):87–96CrossRef

Yan Y, Zhang X, Mao H, Huang Y, Ding Q, Pang X (2015) Hydroxyapatite/gelatin functionalized graphene oxide composite coatings deposited on TiO2 nanotube by electrochemical deposition for biomedical applications. Appl Surf Sci 329:76–82CrossRef

Yang K, Shi X, Huang Y, Wang Z, Wang Y, Zhang A, Zhang Q (2017) The research on the sliding friction and wear behaviors of TiAl-10 wt% Ag at elevated temperatures. Mater Chem Phys 186:317–326CrossRef

Yi T, Zhou C, Ma L, Wu L, Xu X, Gu L, Fan Y, Xian G, Fan H, Zhang X (2020) Direct 3-D printing of Ti-6Al-4V/HA composite porous scaffolds for customized mechanical properties and biological functions. J Tissue Eng Regen Med

Yin X, Liang C, Ge F (2018) Electrodeposition of a YSZ–Yttria stabilized zirconia composite coating on a titanium bone implant. Int J Electrochem Sci 13:822–831CrossRef

Yu H, Zhang W, Wang H, Ji X, Song Z, Li X, Xu B (2017) In-situ synthesis of TiC/Ti composite coating by high frequency induction cladding. J Alloy Compd 701:244–255CrossRef

Zhang H, Yu H, Chen C (2017) Microstructure and wear resistance of composite coating by laser cladding Ni60A/B4C pre-placed powders on Ti-6Al-4V substrate. Sci Eng Compos Mater 24(4):541–546CrossRef

Zhang W, Tian Y, He H, Xu L, Li W, Zhao D (2020) Recent advances in synthesis of hierarchically mesoporous TiO2 materials for energy and environmental applications. Natl Sci Rev

Zhao X, Zhang P, Wang X, Chen Y, Liu H, Chen L, Sheng Y, Li W (2018) In-situ formation of textured TiN coatings on biomedical titanium alloy by laser irradiation. J Mech Behav Biomed Mater 78:143–153CrossRef

Zi-Run Y, Hai-Xiang H, Jiang C-F, Li W-M, Liu X-R, Lyu S (2017) Evaluation on dry sliding wear behavior of (TiB+ TiC)/Ti-6Al-4V matrix composite. Int J Precis Eng Manuf 18(8):1139–1146CrossRef

Titel: Tribological Study on Titanium Based Composite Materials in Biomedical Applications
verfasst von: S. Shankar
R. Nithyaprakash
G. Abbas
Verlag: Springer Singapore
Buch: Tribological Applications of Composite Materials
Print ISBN: 978-981-15-9634-6

Electronic ISBN: 978-981-15-9635-3

Copyright-Jahr: 2021
DOI: https://doi.org/10.1007/978-981-15-9635-3_8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht