nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

04.02.2022 | Critical Review

Ultrasonic welding of fiber-reinforced thermoplastic composites: a review

verfasst von: Haijun Li, Chao Chen, Ruixiang Yi, Yuxiang Li, Jinliang Wu

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 1-2/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Ultrasonic welding is a special joining process with high joining speed and good joint strength. Compared with conventional mechanical and adhesive bonding, ultrasonic welding has many advantages for joining thermoplastic composite. In this paper, the latest advances in ultrasonic welding technology for fiber-reinforced thermoplastic composites were reviewed. This paper not only compares the advantages and disadvantages of the ultrasonic welding process with other welding methods but also discusses the influence of ultrasonic welding parameters on the welding quality. The ultrasonic welding of dissimilar materials was summarized. In addition, the quality inspection and repair of ultrasonic composite welding were also discussed. Finally, the research status and development prospect of ultrasonic welding for thermoplastic composites were analyzed.

Vorheriger Artikel Extreme pressure and antiwear additives for lubricant: academic insights and perspectives

Nächster Artikel The brazing of Al2O3 ceramic and other materials

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Bhudolia SK, Gohel G, Leong KF, Islam A (2020) Advances in ultrasonic welding of thermoplastic composites: a review. Materials 13(6):1284. https://doi.org/10.3390/ma13061284CrossRef

Yang IY, Yang YJ, Park JW, Lee KS, Cho YT, Park JW, Hsu DK, Im KH (2008) Application of air-coupled ultrasonic techniques using carbon/carbon composites. Mater Sci Forum 580–582:121–124. https://doi.org/10.4028/www.scientific.net/MSF.580-582.121CrossRef

Stavrov D, Bersee HEN (2005) Resistance welding of thermoplastic composites—an overview. Compos A Appl Sci Manuf 36(1):39–54. https://doi.org/10.1016/j.compositesa.2004.06.030CrossRef

Benatar A, Gutowski TG (1989) Ultrasonic welding of thermoplastic composites, in: Annual Technical Conference - Society of Plastics Engineers 507–510

Trunzo MSJ, Graham SM, Caton P (2012) Integration of carbon fiber composite materials into air-cooled reciorocating piston engines for UAV application. ASME International Mechanical Engineering Congress and Exposition. Proceedings (IMECE) 3:943–956. https://doi.org/10.1115/IMECE2012-87607CrossRef

Das B, Masters W (2019) Comparison of tab-to-busbar ultrasonic joints for electric vehicle li-ion battery applications. World Electric Vehicle Journal 10(3):55. https://doi.org/10.3390/wevj10030055CrossRef

Atmakuri A, Palevicius A, Vilkauskas A, Janusas G (2020) Review of hybrid fiber based composites with nano particles-material properties and applications. Polymers (Basel) 12(9). https://doi.org/10.3390/polym12092088

Yassin K, Hojjati M (2018) Processing of thermoplastic matrix composites through automated fiber placement and tape laying methods: a review. J Thermoplast Compos Mater 31(12):1676–1725. https://doi.org/10.1177/0892705717738305CrossRef

Dobrota D, Lazar SV (2021) Ultrasonic welding of PBT-GF30 (70% polybutylene terephthalate + 30% fiber glass) and expanded polytetrafluoroethylene (e-PTFE). Polymers (Basel) 13(2):298. https://doi.org/10.3390/polym13020298CrossRef

10.

Bhudolia SK, Perrotey P, Joshi SC (2017) Enhanced vibration damping and dynamic mechanical characteristics of composites with novel pseudo-thermoset matrix system. Compos Struct 179:502–513. https://doi.org/10.1016/j.compstruct.2017.07.093CrossRef

11.

Yousefpour A, Hojjati M, Immarigeon J-P (2016) Fusion bonding/welding of thermoplastic composites. J Thermoplast Compos Mater 17(4):303–341. https://doi.org/10.1177/0892705704045187CrossRef

12.

Gouin O’Shaughnessey P, Dubé M, Fernandez Villegas I (2016) Modeling and experimental investigation of induction welding of thermoplastic composites and comparison with other welding processes. J Compos Mater 50(21):2895–2910. https://doi.org/10.1177/0021998315614991CrossRef

13.

Rao Z, Ou L, Wang Y, Wang P-C (2020) A self-piercing-through riveting method for joining of discontinuous carbon fiber reinforced nylon 6 composite. Compos Struct 237:111841. https://doi.org/10.1016/j.compstruct.2019.111841CrossRef

14.

Wang J, Zhang G, Zheng X, Li J, Li X, Zhu W, Yanagimoto J (2021) A self-piercing riveting method for joining of continuous carbon fiber reinforced composite and aluminum alloy sheets. Compos Struct 259:113219. https://doi.org/10.1016/j.compstruct.2020.113219CrossRef

15.

Pizzorni M, Parmiggiani A, Prato M (2021) Adhesive bonding of a mixed short and continuous carbon-fiber-reinforced nylon-6 composite made via fused filament fabrication. Int J Adhes Adhes 107:102856. https://doi.org/10.1016/j.ijadhadh.2021.102856CrossRef

16.

Sun H, Kosukegawa H, Hashimoto M, Uchimoto T, Takagi T (2020) Electromagnetic-pulse-induced acoustic testing for nondestructive testing of plastic composite/metal adhesive bonding. Int J Hydrogen Energy 45(55):31303–31314. https://doi.org/10.1016/j.ijhydene.2020.08.079CrossRef

17.

Ecault R, Touchard F, Berthe L, Boustie M (2020) Laser shock adhesion test numerical optimization for composite bonding assessment. Compos Struct 247:112441. https://doi.org/10.1016/j.compstruct.2020.112441CrossRef

18.

Mandolfino C, Lertora E, Gambaro C (2017) Influence of cold plasma treatment parameters on the mechanical properties of polyamide homogeneous bonded joints. Surf Coat Technol 313:222–229. https://doi.org/10.1016/j.surfcoat.2017.01.071CrossRef

19.

Gouveia D, Razzoog ME, Sierraalta M, Alfaro MF (2021) Effect of surface treatment and manufacturing process on the shear bond strength of veneering composite resin to polyetherketoneketone (PEKK) and polyetheretherketone (PEEK). J Prosthet Dent 3:10–16. https://doi.org/10.1016/j.prosdent.2021.02.003CrossRef

20.

Staab F, Liesegang M, Balle F (2020) Local shear strength distribution of ultrasonically welded hybrid aluminium to CFRP joints. Compos Struct 248:112481. https://doi.org/10.1016/j.compstruct.2020.112481CrossRef

21.

Qiu J, Zhang G, Sakai E, Liu W, Zang L (2020) Thermal welding by the third phase between polymers: a review for ultrasonic weld technology developments. Polymers (Basel) 12(4):759. https://doi.org/10.3390/polym12040759CrossRef

22.

Greitmann MJ, Adam T, Holzweißig MHG, Stroh D, Wagner G, Wiesner P, Zust R (2003) Present status and future prospects of special welding processes—ultrasonic welding. Weld Cut 55(5):268–274

23.

Palardy G, Villegas IF (2016) Smart ultrasonic welding of thermoplastic composites, in: Proceedings of the American Society for Composites - 31st Technical Conference, ASC

24.

Wagner G, Balle F, Eifler D (2012) Ultrasonic welding of hybrid joints Jom 64(3):401–406. https://doi.org/10.1007/s11837-012-0269-5CrossRef

25.

Villegas IF, Moser L, Yousefpour A, Mitschang P, Bersee HEN (2012) Process and performance evaluation of ultrasonic, induction and resistance welding of advanced thermoplastic composites. J Thermoplast Compos Mater 26(8):1007–1024. https://doi.org/10.1177/0892705712456031CrossRef

26.

Kumar S, Wu CS, Padhy GK, Ding W (2017) Application of ultrasonic vibrations in welding and metal processing: A status review. J Manuf Process 26:295–322. https://doi.org/10.1016/j.jmapro.2017.02.027CrossRef

27.

Levy A, Le Corre S, Poitou A (2012) Ultrasonic welding of thermoplastic composites: a numerical analysis at the mesoscopic scale relating processing parameters, flow of polymer and quality of adhesion. IntJ Mater Form 7(1):39–51. https://doi.org/10.1007/s12289-012-1107-6CrossRef

28.

Cui X, Tian L, Wang DS, Dong JP (2021) Summary of thermosetting composite material welding. J Phys: Conf Ser 1765:012021. https://doi.org/10.1088/1742-6596/1765/1/012021CrossRef

29.

Dold C, Henerichs M, Bochmann L, Wegener K (2012) Comparison of ground and laser machined polycrystalline diamond (PCD) tools in cutting carbon fiber reinforced plastics (CFRP) for aircraft structures. Procedia CIRP 1:178–183. https://doi.org/10.1016/j.procir.2012.04.031CrossRef

30.

Matteucci M, Heiskanen A, Zor K, Emneus J, Taboryski R (2016) Comparison of ultrasonic welding and thermal bonding for the Integration of thin film metal electrodes in injection molded polymeric lab-on-chip systems for electrochemistry. Sensors (Basel) 16(11):1795. https://doi.org/10.3390/s16111795CrossRef

31.

Ni ZL, Wang XX, Li S, Ye FX (2019) Mechanical strength enhancement of ultrasonic metal welded Cu/Cu joint by Cu nanoparticles interlayer. J Manuf Process 38:88–92. https://doi.org/10.1016/j.jmapro.2019.01.014CrossRef

32.

Yang J, Zhang J, Qiao J (2019) Molecular dynamics simulations of atomic diffusion during the Al-Cu ultrasonic welding process. Materials (Basel) 12(14):2306. https://doi.org/10.3390/ma12142306CrossRef

33.

Wirth E, Sabantina L, Weber MO, Finsterbusch K, Ehrmann A (2018) Preliminary study of ultrasonic welding as a joining process for electrospun nanofiber mats. Nanomaterials (Basel) 8(10):746. https://doi.org/10.3390/nano8100746CrossRef

34.

Benatar A, Eswaran RV, Nayar SK (1989) Ultrasonic welding of thermoplastics in the near-field. Polym Eng Sci 29(23):1689–1698. https://doi.org/10.1002/pen.760292311CrossRef

35.

Balle F, Wagner G, Eifler D (2009) Ultrasonic metal welding of aluminium sheets to carbon fibre reinforced thermoplastic composites. Adv Eng Mater 11(1–2):35–39. https://doi.org/10.1002/adem.200800271CrossRef

36.

Ni ZL, Yang JJ, Li S, Wang XX, Ye FX (2019) A review on ultrasonic spot welding of copper alloys. Mater Sci Technol 36(3):264–283. https://doi.org/10.1080/02670836.2019.1705590CrossRef

37.

Kim J, Kim J, Kim I-j, Kang S, Chun K (2019) An analysis of mechanical properties for ultrasonically welded multiple C1220-Al1050 layers. Appl Sci 9(19):4188. https://doi.org/10.3390/app9194188CrossRef

38.

Li H, Cao B (2019) Microstructure and mechanical properties of resistance heat-assisted high-power ultrasonic dissimilar welded Cu/Al joint. Metals 9(8). https://doi.org/10.3390/met9080873

39.

Zhang W, Ao S, Oliveira JP, Zeng Z, Huang Y, Luo Z (2018) Microstructural characterization and mechanical behavior of NiTi shape memory alloys ultrasonic joints using Cu interlayer. Materials 11(10). https://doi.org/10.3390/ma11101830

40.

Kim JH, Jihye L, Yoo CD (2005) Soldering method using longitudinal ultrasonic. IEEE Trans Compon Packag Technol 28(3):493–498. https://doi.org/10.1109/tcapt.2005.848576CrossRef

41.

Kumar P, Prakasan K (2018) Acoustic horn design for joining metallic wire with flat metallic sheet by ultrasonic vibrations. Journal of Vibroengineering 20(7):2758–2770. https://doi.org/10.21595/jve.2018.19648

42.

Yusuf L, Symes MD, Prentice P (2021) Characterising the cavitation activity generated by an ultrasonic horn at varying tip-vibration amplitudes. Ultrason Sonochem 70. https://doi.org/10.1016/j.ultsonch.2020.105273

43.

Xiping H, Xiaojuan C, Yanjun W, Jingfeng N (2019) A high displacement ultrasonic horn with a cuboid hole in the front end, in: Proceedings of 2019 16th International Bhurban Conference on Applied Sciences and Technology IBCAST 873–879

44.

Jongbloed B, Teuwen J, Palardy G, Fernandez Villegas I, Benedictus R (2019) Continuous ultrasonic welding of thermoplastic composites: Enhancing the weld uniformity by changing the energy director. J Compos Mater 54(15):2023–2035. https://doi.org/10.1177/0021998319890405CrossRef

45.

Shimada STH, Hasebe K, Hayashi N, Ochi Y, Matsui T, Nishizaki I, Matsumoto Y, Tanaka Y, Nakamura H, Mizuno Y, Nakamura K (2016) Ultrasonic welding of polymer optical fibres onto composite materials. Electron Lett 52(17):1472–1474. https://doi.org/10.1049/el.2016.0905CrossRef

46.

Peng H, Jiang X, Bai X, Li D, Chen D (2018) Microstructure and mechanical properties of ultrasonic spot welded Mg/Al alloy dissimilar joints. Metals 8(4):229. https://doi.org/10.3390/met8040229CrossRef

47.

Shah U, Liu X (2020) Effect of ultrasonic energy on the spot weldability of aluminum alloy AA6061. Mater Des 192:108690. https://doi.org/10.1016/j.matdes.2020.108690CrossRef

48.

Gu X, Liu D, Liu J (2018) Effect of post-weld heat treatment on the dissimilar Cu/Al joints pro-duced by high power ultrasonic spot welding. ISIJ Int 58(9):1721–1726. https://doi.org/10.2355/isijinternational.ISIJINT-2017-694CrossRef

49.

Yao Y, Pan Y, Liu S (2020) Power ultrasound and its applications: A state-of-the-art review. Ultrason Sonochem 62:104722. https://doi.org/10.1016/j.ultsonch.2019.104722CrossRef

50.

Zhao T, Zhao Q, Wu W, Xi L, Li Y, Wan Z, Villegas IF, Benedictus R (2021) Enhancing weld attributes in ultrasonic spot welding of carbon fibre-reinforced thermoplastic composites: Effect of sonotrode configurations and process control. Compos B Eng 211:108648. https://doi.org/10.1016/j.compositesb.2021.108648CrossRef

51.

Wang DJ, Jiang JJ, Duan FJ, Zhang, Liu W, FM, Qu XH (2020) A novel fast resonance frequency tracking method based on the admittance circle for ultrasonic transducers. IEEE Trans Industr Electron 67(8):6864–6873. https://doi.org/10.1109/tie.2019.2938476CrossRef

52.

Gandomzadeh D, Abbaspour-Fard MH (2020) Numerical study of the effect of core geometry on the performance of a magnetostrictive transducer. J Magn Magn Mater 513:166823. https://doi.org/10.1016/j.jmmm.2020.166823CrossRef

53.

Wang P, Zhang Y, Yao E, Mi Y, Zheng Y, Tang C (2021) Method of measuring the mechanical properties of ferromagnetic materials based on magnetostrictive EMAT characteristic parameters. Measurement: Journal of the International Measurement Confederation 168. https://doi.org/10.1016/j.measurement.2020.108187

54.

Hajati A, Latev D, Gardner D, Hajati A, Imai D, Torrey M, Schoeppler M (2012) Three-dimensional micro electromechanical system piezoelectric ultrasound transducer. Appl Phys Lett 101(25):253101. https://doi.org/10.1063/1.4772469CrossRef

55.

Jamshidi R, Jafari AA (2021) Conical shell vibration control with distributed piezoelectric sensor and actuator layer. Compos Struct 256. https://doi.org/10.1016/j.compstruct.2020.113107

56.

Nedeloni MD, Hatiegan C, Vasile O, Hamat CO, Fanica C, Gillich N (2015) Numerical study regarding the influence of material components for a booster—ultrasonic horn assembly on the natural frequency. Romanian Journal of Acoustics and Vibration 12(2):155–160

57.

Harras B, Benamar R, White RG (2002) Investigation of non-linear free vibrations of fully clamped symmetrically laminated carbon-fibre-reinforced PEEK (AS4/APC2) rectangular composite panels. Compos Sci Technol 62:719–727CrossRef

58.

Ageorges C, Ye L (2002) Fusion bonding of polymer composites. Engineering materials and processes 978–1087. https://doi.org/10.1007/978-1-4471-0171-0

59.

Zhen Y, Fu Y, Li H, Cao Z, Chen Y (2004) Mathematical modeling and experimental verification of a novel single-actuated ultrasonic elliptical vibrator. J Thermoplast Compos Mater 17(1):51. https://doi.org/10.1177/1687814017745413CrossRef

60.

Kuratani F, Miyano S, Yoshida T, Washio S (2019) Effect of contact area with fixture on dynamic behaviour of joint interface in ultrasonic welding of thermoplastics, in: J Phys Conf Ser 012047

61.

Tsiangou E, de Freitas ST, Villegas IF, Benedictus R (2019) Investigation on energy director-less ultrasonic welding of polyetherimide (PEI)- to epoxy-based composites. Compos B Eng 173:107014. https://doi.org/10.1016/j.compositesb.2019.107014CrossRef

62.

Xu XF, Bates PJ, Zak G (2015) Effect of glass fiber and crystallinity on light transmission during laser transmission welding of thermoplastics. Opt Laser Technol 69:133–139. https://doi.org/10.1016/j.optlastec.2014.12.025CrossRef

63.

Samanta A, Xiao S, Shen N, Li J, Ding H (2019) Atomistic simulation of diffusion bonding of dissimilar materials undergoing ultrasonic welding. Int J Adv Manuf Technol 103(1–4):879–890. https://doi.org/10.1007/s00170-019-03582-9CrossRef

64.

Pokhrel N, Vabbina PK, Pala N (2016) Sonochemistry: science and engineering. Ultrason Sonochem 29:2957. https://doi.org/10.1016/j.ultsonch.2015.07.023CrossRef

65.

Zhang Z, Xiaodong W, Yi L, Zhenqiang Z, Liding W (2009) Study on heating process of ultrasonic welding for thermoplastics. J Thermoplast Compos Mater 23(5):647–664. https://doi.org/10.1177/0892705709356493CrossRef

66.

Kohler F, Villegas IF, Dransfeld C, Herrmann A (2021) Static ultrasonic welding of carbon fibre unidirectional thermoplastic materials and the influence of heat generation and heat transfer. J Compos Mater 1:16. https://doi.org/10.1177/0021998320976818

67.

Tutunjian S, Dannemann M, Modler N, Kucher M, Fellermayer A (2020) A numerical analysis of the temporal and spatial temperature development during the ultrasonic spot welding of fibre-reinforced thermoplastics. J Manuf Mater Processing 4(2):30. https://doi.org/10.3390/jmmp4020030CrossRef

68.

Bai Y, Chen Y (2020) Research on ultrasonic plastic flexible welding equipment for automobile steering wheel. In: 2020 3rd International Conference on Electron Device and Mechanical Engineering (ICEDME). pp 264–269. https://doi.org/10.1109/ICEDME50972.2020.00067

69.

Wang K, Shriver D, Li Y, Banu M, Hu SJ, Xiao G, Arinez J, Fan H-T (2017) Characterization of weld attributes in ultrasonic welding of short carbon fiber reinforced thermoplastic composites. J Manuf Process 29:124–132. https://doi.org/10.1016/j.jmapro.2017.07.024CrossRef

70.

Villegas IF, Bersee HEN (2010) Ultrasonic welding of advanced thermoplastic composites: An investigation on energy-directing surfaces. Adv Polym Technol 29(2):112–121. https://doi.org/10.1002/adv.20178CrossRef

71.

Villegas IF, Palardy G (2017) Ultrasonic welding of CF/PPS composites with integrated triangular energy directors: melting, flow and weld strength development. Compos Interfaces 24(5):515–528. https://doi.org/10.1080/09276440.2017.1236626CrossRef

72.

Bhudolia SK, Gohel G, Kantipudi J, Leong KF, Barsotti Jr RJ (2020) Ultrasonic welding of novel carbon/ elium® thermoplastic composites with flat and integrated energy directors: lap shear characterisation and fractographic investigation. Materials (Basel) 13(7):1634. https://doi.org/10.3390/ma13071634CrossRef

73.

Gohel G, Bhudolia SK, Kantipudi J, Leong KF, Barsotti RJ (2020) Ultrasonic welding of novel carbon/elium® with carbon/epoxy composites. Composites Communications 22:100463. https://doi.org/10.1016/j.coco.2020.100463CrossRef

74.

Kiss Z, Temesi T, Bitay E, Bárány T, Czigány T (2019) Ultrasonic welding of all‐polypropylene composites. J Appl Polym Sci 137(24). https://doi.org/10.1002/app.48799

75.

Villegas IF (2019) Ultrasonic welding of thermoplastic composites. Frontiers in Materials 6:291. https://doi.org/10.3389/fmats.2019.00291CrossRef

76.

Villegas IF (2014) Strength development versus process data in ultrasonic welding of thermoplastic composites with flat energy directors and its application to the definition of optimum processing parameters. Compos A Appl Sci Manuf 65:27–37. https://doi.org/10.1016/j.compositesa.2014.05.019CrossRef

77.

Tutunjian S, Dannemann M, Fischer F, Eroğlu O, Modler N (2018) A control method for the ultrasonic spot welding of fiber-reinforced thermoplastic laminates through the weld-power time derivative. Journal of Manufacturing and Materials Processing 3(1):1. https://doi.org/10.3390/jmmp3010001CrossRef

78.

Li X, Liang X, Zhang Z, Ma J, Shen J (2020) Cold joining to fabricate large size metallic glasses by the ultrasonic vibrations. Scripta Mater 185:100–104. https://doi.org/10.1016/j.scriptamat.2020.03.059CrossRef

79.

Palardy G, Shi H, Levy A, Le Corre S, Villegas IF (2018) A study on amplitude transmission in ultrasonic welding of thermoplastic composites. Compos A Appl Sci Manuf 113:339–349. https://doi.org/10.1016/j.compositesa.2018.07.033CrossRef

80.

Alrubaie MAA (2020) Ultrasonic welding of glass fiber reinforced PP thermoplastic composites: an investigation of the outer layer orientation and the fiber volume fraction. Key Eng Mater 858:3–13. https://doi.org/10.4028/www.scientific.net/KEM.858.3CrossRef

81.

Tutunjian S, Eroglu O, Dannemann M, Modler N, Fischer F (2019) A numerical analysis of an energy directing method through friction heating during the ultrasonic welding of thermoplastic composites. J Thermoplast Compos Mater 33(11):1569–1587. https://doi.org/10.1177/0892705719833108CrossRef

82.

Wang T, Su X, Wang HH, Zhang ZH, Li H, Chen J (2019) Influence mechanism of welding time and energy director to the thermoplastic composite joints by ultrasonic welding. J Manuf Process 37:196–202. https://doi.org/10.1016/j.jmapro.2018.11.002CrossRef

83.

Kumar KR, Omkumar M (2020) Investigation and characterization of ultrasonically welded GF/PA6T composites. Materials Today: Proceedings 26:282–286. https://doi.org/10.1016/j.matpr.2019.11.261CrossRef

84.

Chen LY, Zhi Q, Li JC, Liu ZX, Wang PC (2018) Single-sided ultrasonic welding of CF/nylon 6 composite without energy directors. Weld J 97(1):17–25. https://doi.org/10.29391/2018.97.002

85.

Zhi Q, Tan X-R, Lu L, Chen L-Y, Li J-C, Liu Z-X (2017) Decomposition of ultrasonically welded carbon fiber/polyamide 66 and its effect on weld quality. Welding in the World 61(5):1017–1028. https://doi.org/10.1007/s40194-017-0482-5CrossRef

86.

Palardy G, Villegas IF (2016) On the effect of flat energy directors thickness on heat generation during ultrasonic welding of thermoplastic composites. Compos Interfaces 24(2):203–214. https://doi.org/10.1080/09276440.2016.1199149CrossRef

87.

Senders F, van Beurden M, Palardy G, Villegas IF (2016) Zero-flow: a novel approach to continuous ultrasonic welding of CF/PPS thermoplastic composite plates. Advanced Manufacturing: Polymer & Composites Science 2(3–4):83–92. https://doi.org/10.1080/20550340.2016.1253968CrossRef

88.

Dell’Anna R, Lionetto F, Montagna F, Maffezzoli A (2018) Lay-up and consolidation of a composite pipe by in situ ultrasonic welding of a thermoplastic matrix composite tape. Materials (Basel) 11(5):786. https://doi.org/10.3390/ma11050786CrossRef

89.

Zhang G-P, Li J-C, Liu Z-X, Wang P-C (2020) Application of ultrasonic welding to repair adhesively bonded short carbon fiber reinforced Nylon 6 composites. Int J Adhes Adhes 100:102603. https://doi.org/10.1016/j.ijadhadh.2020.102603CrossRef

90.

Benatar A, Gutowski TG (1989) Ultrasonic welding of PEEK graphite APC-2 composites. Polym Eng Sci 29:1705–1721CrossRef

91.

Wang X, Yan J, Li R, Yang S (2016) FEM investigation of the temperature field of energy director during ultrasonic welding of PEEK composites. J Thermoplast Compos Mater 19(5):593–607. https://doi.org/10.1177/0892705706067479CrossRef

92.

Bhudolia SK, Gohel G, Fai LK, Barsotti RJ Jr (2020) Investigation on ultrasonic welding attributes of novel carbon/elium® composites. Materials (Basel) 13(5):1117. https://doi.org/10.3390/ma13051117CrossRef

93.

Levy A, Le Corre S, Fernandez Villegas I (2014) Modeling of the heating phenomena in ultrasonic welding of thermoplastic composites with flat energy directors. J Mater Process Technol 214(7):1361–1371. https://doi.org/10.1016/j.jmatprotec.2014.02.009CrossRef

94.

Zhang G, Qiu J, Sakai E, Zhou Z (2021) Interface investigation between dissimilar materials by ultrasonic thermal welding by the third phase. Int J Adhes Adhes 104:102722. https://doi.org/10.1016/j.ijadhadh.2020.102722CrossRef

95.

Savitski A, Klinstein L, Holt K (2016) Novel round energy director for use with servo-driven ultrasonic welder. Phys Procedia 87:105–117. https://doi.org/10.1016/j.phpro.2016.12.017CrossRef

96.

Takeda S-I, Tanks JD, Sugimoto S, Iwahori Y (2020) Application of sheet-like energy directors to ultrasonic welding of carbon fibre-reinforced thermoplastics. Adv Compos Mater 30(2):192–204. https://doi.org/10.1080/09243046.2020.1811464CrossRef

97.

Schug A, Rinker D, Hinterhoelzl R, Drechsler K (2018) Evaluating the potential of forming spot-welded layups out of fibre reinforced thermoplastic tape without previous consolidation. IntJ Mater Form 12(2):279–293. https://doi.org/10.1007/s12289-018-1416-5CrossRef

98.

Luo Y, Zhang Z, Wang X, Zheng Y (2010) Ultrasonic bonding for thermoplastic microfluidic devices without energy director. Microelectron Eng 87(11):2429–2436. https://doi.org/10.1016/j.mee.2010.04.020CrossRef

99.

Gao Y-H, Zhi Q, Lu L, Liu Z-X, Wang P-C (2018) Ultrasonic welding of carbon fiber reinforced nylon 66 composite without energy director. J Manuf Sci Eng 140(5):051009–151001. https://doi.org/10.1115/1.4039113CrossRef

100.

Li Y, Arinez J, Liu Z, Hwa Lee T, Fan H-T, Xiao G, Banu M, Jack Hu S (2018) Ultrasonic welding of carbon fiber reinforced composite with variable blank holding force. J Manuf Sci Eng 140(9):091011–091011. https://doi.org/10.1115/1.4040427CrossRef

101.

Zhi Q, Tan XR, Liu ZX (2017) Effect of moisture on the ultrasonic welding of carbon-fiber-reinforced polyamide 66 composite. Weld J 96(6):185s–192s

102.

Liu HK, Dai WL, Lee YC (2000) Moisture effects and acoustic emission characterization on lap shear strength in ultrasonic welded carbon/nylon composites. J Mater Sci 35(13):3389–3396. https://doi.org/10.1023/A:1004837119725CrossRef

103.

Wang Q, Springer GS (2016) Moisture absorption and fracture toughness of PEEK polymer and graphite fiber reinforced PEEK. J Compos Mater 23(5):434–447. https://doi.org/10.1177/002199838902300501CrossRef

104.

Tsiangou E, Teixeira de Freitas S, Villegas IF, Benedictus R (2020) Ultrasonic welding of epoxy- to polyetheretherketone-based composites: Investigation on the material of the energy director and the thickness of the coupling layer. J Compos Mater 54(22):3081–3098. https://doi.org/10.1177/0021998320910207CrossRef

105.

Bhudolia SK, Gohel G, Fai LK, Barsotti Rj Jr (2020) Fatigue response of ultrasonically welded carbon/Elium® thermoplastic composites. Mater Lett 264. https://doi.org/10.1016/j.matlet.2020.127362

106.

Villegas FI, Vizcaino Rubio P (2015) On avoiding thermal degradation during welding of high-performance thermoplastic composites to thermoset composites. Compos A Appl Sci Manuf 77:172–180. https://doi.org/10.1016/j.compositesa.2015.07.002CrossRef

107.

Tsiangou E, Kupski J, Teixeira de Freitas S, Benedictus R, Villegas IF (2021) On the sensitivity of ultrasonic welding of epoxy- to polyetheretherketone (PEEK)-based composites to the heating time during the welding process. Compos A Appl Sci Manuf 144:106334. https://doi.org/10.1016/j.compositesa.2021.106334CrossRef

108.

Villegas IF, Van Moorleghem R (2018) Ultrasonic welding of carbon/epoxy and carbon/PEEK composites through a PEI thermoplastic coupling layer. Compos A Appl Sci Manuf 109:75–83. https://doi.org/10.1016/j.compositesa.2018.02.022CrossRef

109.

Weibel D, Balle F, Backe D (2017) Ultrasonic fatigue of CFRP - experimental principle, damage analysis and very high cycle fatigue properties, in: Key Engineering Materials 621–628

110.

Sebastian B, Hannemann B, Balle F, Schmeer S, Breuer UP (2017) Fatigue behavior of multifunctional CFRP laminates and intrinsic capabilities for damage monitoring, in: ICCM International Conferences on Composite Materials

111.

Guo H, Gingerich MB, Headings LM, Hahnlen R, Dapino MJ (2019) Joining of carbon fiber and aluminum using ultrasonic additive manufacturing (UAM). Compos Struct 208:180–188. https://doi.org/10.1016/j.compstruct.2018.10.004CrossRef

112.

Ageorges C, Ye L, Hou M (2000) Advances in fusion bonding techniques for joining thermoplastic matrix composites: a review. Composites: Part A:839–857. https://doi.org/10.1016/S1359-835X(00)00166-4

113.

Dhara S, Das A (2020) Impact of ultrasonic welding on multi-layered Al–Cu joint for electric vehicle battery applications: a layer-wise microstructural analysis. Mater Sci Eng A 791:139795. https://doi.org/10.1016/j.msea.2020.139795CrossRef

114.

Balle F, Staab F, Born J (2016) Joining of light metals to fiber reinforced polymer composites by power ultrasonics, in: ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials

115.

Balle F, Eifler D (2012) Statistical test planning for ultrasonic welding of dissimilar materials using the example of aluminum-carbon fiber reinforced polymers (CFRP) joints. Materialwiss Werkstofftech 43(4):286–292. https://doi.org/10.1002/mawe.201200943CrossRef

116.

Wagner G, Balle F, Eifler D (2013) Ultrasonic welding of aluminum alloys to fiber reinforced polymers. Adv Eng Mater 15(9):792–803. https://doi.org/10.1002/adem.201300043CrossRef

117.

Lionetto F, Balle F, Maffezzoli A (2017) Hybrid ultrasonic spot welding of aluminum to carbon fiber reinforced epoxy composites. J Mater Process Technol 247:289–295. https://doi.org/10.1016/j.jmatprotec.2017.05.002CrossRef

118.

Kida K, Cheng C-P, Cheng C-H, Chen Y-C, l-W W, You Y-S, (2017) Ultrasonic dissimilar joining of aluminum alloy and polymer with the composite material of ABS polymer doping carbonized rice husk. MATEC Web of Conferences 130:06001. https://doi.org/10.1051/matecconf/201713006001CrossRef

119.

Lionetto F, Mele C, Leo P, D’Ostuni S, Balle F, Maffezzoli A (2018) Ultrasonic spot welding of carbon fiber reinforced epoxy composites to aluminum: mechanical and electrochemical characterization. Compos B Eng 144:134–142. https://doi.org/10.1016/j.compositesb.2018.02.026CrossRef

120.

Staab F, Balle F (2019) Ultrasonic torsion welding of ageing-resistant Al/CFRP joints: Properties, microstructure and joint formation. Ultrasonics 93:139–144. https://doi.org/10.1016/j.ultras.2018.11.006CrossRef

121.

James S, De La Luz L (2019) Finite element analysis and simulation study of CFRP/Ti stacks using ultrasonic additive manufacturing. Int J Adv Manuf Technol 104(9–12):4421–4431. https://doi.org/10.1007/s00170-019-04228-6CrossRef

122.

Backe S, Balle F, Hannemann B, Schmeer S, Breuer UP (2019) Fatigue properties of multifunctional metal- and carbon-fibre-reinforced polymers and intrinsic capabilities for damage monitoring. Fatigue Fract Eng Mater Struct 42(1):143–151. https://doi.org/10.1111/ffe.12878CrossRef

123.

Konchakova N, Balle F, Barth FJ, Mueller R, Eifler D, Steinmann P (2010) Finite element analysis of an inelastic interface in ultrasonic welded metal/fibre-reinforced polymer joints. Comput Mater Sci 50(1):184–190. https://doi.org/10.1016/j.commatsci.2010.07.024CrossRef

124.

Balle F, Eifler D (2013) Special topic: welded metal/cfrp-structures. Adv Eng Mater 15(9):791. https://doi.org/10.1002/adem.201300168CrossRef

125.

Konchakova NA, Mueller R, Barth FJ (2010) Modelling and numeric analysis of metal/fibre-reinforced polymer joints, in: 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale

126.

Staab F, Balle F, Born J (2017) Ultrasonic torsion welding of aging resistant Al/CFRP joints—concepts, mechanical and microstructural properties, in: Key Engineering Materials 395–400

127.

Rubino F, Parmar H, Esperto V, Carlone P (2020) Ultrasonic welding of magnesium alloys: a review. Mater Manuf Processes 35(10):1051–1068. https://doi.org/10.1080/10426914.2020.1758330CrossRef

128.

Tamura R, Yasuda K (2018) Ultrasonic joining of carbon fiber reinforced thermoplastic and Ti alloy. 2018 Ieee Cpmt Symposium Japan (Icsj):135–138. https://doi.org/10.1109/ICSJ.2018.8602615

129.

Kawakami K, Yasuda K (2019) Utrasonic joining of carbon fiber reinforced thermoplastic and magnesium alloy, in: 2019 IEEE CPMT Symposium Japan, ICSJ 135–137

130.

James S, Dang C (2020) Investigation of shear failure load in ultrasonic additive manufacturing of 3D CFRP/Ti structures. J Manuf Process 56:1317–1321. https://doi.org/10.1016/j.jmapro.2020.04.026CrossRef

131.

Guo W, Jin J, Jack Hu S (2019) Profile monitoring and fault diagnosis via sensor fusion for ultrasonic welding. J Manuf Sci Eng 141(8):081001–081001. https://doi.org/10.1115/1.4043731CrossRef

132.

Li Y, Lee TH, Banu M, Hu SJ (2020) An integrated process-performance model of ultrasonic composite welding based on finite element and artificial neural network. J Manuf Process 56:1374–1380. https://doi.org/10.1016/j.jmapro.2020.04.033CrossRef

133.

Rodríguez-Martín M, Lagüela S, González-Aguilera D, Rodríguez-Gonzálvez P (2015) Procedure for quality inspection of welds based on macro-photogrammetric three-dimensional reconstruction. Opt Laser Technol 73:54–62. https://doi.org/10.1016/j.optlastec.2015.04.011CrossRef

134.

Ma Z, Zhang Y (2020) Characterization of multilayer ultrasonic welding based on the online monitoring of sonotrode displacement. J Manuf Process 54:138–147. https://doi.org/10.1016/j.jmapro.2020.03.007CrossRef

135.

Li Y, Yu B, Wang B, Lee TH, Banu M (2020) Online quality inspection of ultrasonic composite welding by combining artificial intelligence technologies with welding process signatures. Mater Des 194:108912. https://doi.org/10.1016/j.matdes.2020.108912CrossRef

136.

Li Y, Liu Z, Shen J, Lee TH, Banu M, Hu SJ (2019) Weld quality prediction in ultrasonic welding of carbon fiber composite based on an ultrasonic wave transmission model. J Manuf Sci Eng 141(8):081010–081011. https://doi.org/10.1115/1.4043900CrossRef

137.

Winger H, Döbrich O, Saeed H, Gereke T, Nocke A, Cherif C (2019) Monitoring the joint area of composite membrane materials. Appl Sci 9(10):2068. https://doi.org/10.3390/app9102068CrossRef

138.

Ochôa P, Villegas IF, Groves RM, Benedictus R (2019) Diagnostic of manufacturing defects in ultrasonically welded thermoplastic composite joints using ultrasonic guided waves. NDT and E Int 107:102126. https://doi.org/10.1016/j.ndteint.2019.102126CrossRef

139.

Reis JP, de Moura M, Samborski S (2020) Thermoplastic composites and their promising applications in joining and repair composites structures: a review. Materials (Basel) 13(24):5832. https://doi.org/10.3390/ma13245832CrossRef

140.

Dobrota D, Petrescu V (2018) Use of ultrasound in reconditioning by welding of tools used in the process of regenerating rubber. Materials (Basel) 11(2):276. https://doi.org/10.3390/ma11020276CrossRef

141.

Hoskins D, Palardy G (2020) High-speed consolidation and repair of carbon fiber/epoxy laminates through ultrasonic vibrations: A feasibility study. J Compos Mater 54(20):2707–2721. https://doi.org/10.1177/0021998320903097CrossRef

142.

Hargou K, Pingkarawat K, Mouritz AP, Wang CH (2013) Ultrasonic activation of mendable polymer for self-healing carbon–epoxy laminates. Compos B Eng 45(1):1031–1039. https://doi.org/10.1016/j.compositesb.2012.07.016CrossRef

143.

Chinnadurai T, Prabaharan N, Saravanan S, Pandean MK, Pandiyan P, Alhelou HH (2021) Prediction of process parameters of ultrasonically welded PC/ABS material using soft-computing techniques. IEEE Access 9:33849–33859. https://doi.org/10.1109/access.2021.3061657CrossRef

Titel: Ultrasonic welding of fiber-reinforced thermoplastic composites: a review
verfasst von: Haijun Li
Chao Chen
Ruixiang Yi
Yuxiang Li
Jinliang Wu
Publikationsdatum: 04.02.2022
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 1-2/2022
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-022-08753-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1-2/2022

Numerical study on curing-induced residual stress and deformation of adhesively bonded sandwich structures of dissimilar materials

Stability analysis and experimental research on ultrasonic cutting of wave-absorbing honeycomb material with disc cutter

Type-1 and type-2 radial basis function neural networks Mandami system to evaluate quality features

An improved SegNet network model for accurate detection and segmentation of car body welding slags

Comprehensive study on shape shifting behaviors in FDM-based 4D printing of bilayer structures

Modeling and analysis of tool-chip contact model during quasi-intermittent vibration assisted swing cutting based on two-zone theory

Premium Partner

Marktübersichten