nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

08.02.2022 | Critical Review

The brazing of Al₂O₃ ceramic and other materials

verfasst von: Yuxiang Li, Chao Chen, Ruixiang Yi, Linzhe He

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 1-2/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Al₂O₃ ceramic has a series of excellent properties such as small dielectric constant, large specific volume resistance, and high thermal impact strength. The joining of Al₂O₃ ceramic and other materials can bring into full play the advantages of Al₂O₃ ceramic. Because of the different coefficient of thermal expansion (CTE) and Young’s modulus between Al₂O₃ ceramic and other materials, the joining of Al₂O₃ ceramic and other materials is difficult. The most commonly used method for joining Al₂O₃ ceramic and other materials is brazing. Besides, transient liquid phase (TLP) bonding is also an appropriate method to realize the bonding of Al₂O₃ ceramic. However, several challenges must be overcome to get reliable joints. In this paper, the brazing processes of Al2O3 ceramic and other materials are discussed and analyzed. The characteristics of bonding between Al₂O₃ ceramic and other materials are mentioned. In addition, a particular emphasis has been put on the main problems of the Al₂O₃ ceramic joining process.

Vorheriger Artikel Ultrasonic welding of fiber-reinforced thermoplastic composites: a review

Nächster Artikel Recent progress in minimizing the warpage and shrinkage deformations by the optimization of process parameters in plastic injection molding: a review

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Asthana R, Singh M (2008) Joining of partially sintered alumina to alumina, titanium, Hastealloy and C-SiC composite using Ag–Cu brazes. J Eur Ceram Soc 28(3):617–631. https://doi.org/10.1016/j.jeurceramsoc.2007.06.017CrossRef

Kar A, Mandal S, Ghosh RN, Ghosh TK, Ray AK (2007) Role of Ti diffusion on the formation of phases in the Al₂O₃–Al₂O₃ brazed interface. J Mater Sci 42(14):5556–5561. https://doi.org/10.1007/s10853-006-1092-6CrossRef

Meir S, Kalabukhov S, Frage N, Hayun S (2015) Mechanical properties of Al₂O₃\Ti composites fabricated by spark plasma sintering. Ceram Int 41(3):4637–4643. https://doi.org/10.1016/j.ceramint.2014.12.008CrossRef

Luan XG, Wang JQ, Zou Y, Cheng LF (2016) A novel high temperature adhesive for bonding Al2O3 ceramic. Mat Sci Eng a-Struct 651:517–523. https://doi.org/10.1016/j.msea.2015.11.008CrossRef

Jarman JD, Fahrenholtz WG, Hilmas GE, Watts JL, King DS (2021) Characterization of fusion welded ceramics in the SiC-ZrB2-ZrC system. J Eur Ceram Soc 41(4):2255–2262. https://doi.org/10.1016/j.jeurceramsoc.2020.10.067CrossRef

Koehler G, Thurm B, Fischer B (1989) Diffusion welding of graphite with ceramics 38:162–163

DebRoy T, David S (1995) Physical processes in fusion welding. Rev Mod Phys 67(1):85CrossRef

Chen H, Li LJ, Kemps R, Michielsen B, Jacobs M, Snijkers F, Middelkoop V (2015) Reactive air brazing for sealing mixed ionic electronic conducting hollow fibre membranes. Acta Mater 88:74–82. https://doi.org/10.1016/j.actamat.2015.01.029CrossRef

Mattia D, Desmaison-Brut M, Tetard D, Desmaison J (2005) Wetting of HIP AlN-TiB₂ ceramic composites by liquid metals and alloys. J Eur Ceram Soc 25(10):1797–1803. https://doi.org/10.1016/j.jeurceramsoc.2004.12.012CrossRef

10.

Raju K, Muksin KS, Song KS, Yu JH, Yoon DH (2016) Joining of metal-ceramic using reactive air brazing for oxygen transport membrane applications. Mater Design 109:233–241. https://doi.org/10.1016/j.matdes.2016.07.068CrossRef

11.

Ohuchi FS, Kohyama M (1991) Electronic structure and chemical reactions at metal-alumina and metal-aluminum nitride interfaces. J Am Ceram Soc 74(6):1163–1187. https://doi.org/10.1111/j.1151-2916.1991.tb04086.xCrossRef

12.

Tillmann W, Lugscheider E, Xu R, Indacochea JE (1996) Kinetic and microstructural aspects of the reaction layer at ceramic/metal braze joints. J Mater Sci 31(2):445–452. https://doi.org/10.1007/bf01139163CrossRef

13.

Naka M, Tsuyoshi M, Okamoto I (1990) Ti-precoating effect on wetting and joining of Cu to SiC. ISIJ Int 30(12):1108–1113. https://doi.org/10.2355/isijinternational.30.1108CrossRef

14.

Naidich JV (1981) The wettability of solids by liquid metals. In: Progress in surface and membrane science, vol 14. Elsevier, pp 353–484

15.

Nicholas MG, Mortimer DA (1985) Ceramic/metal joining for structural applications. Mater Sci Tech-Lond 1(9):657–665. https://doi.org/10.1179/mst.1985.1.9.657CrossRef

16.

Ning HL, Lan LF, Wang L, Peng JB, Peng ZJ, Ma JS (2014) Interface reaction thermodynamics of AgCuTi brazing filler metal and alumina ceramic. Advanced Materials Research 936:1239–1246. https://doi.org/10.4028/www.scientific.net/AMR.936.1239CrossRef

17.

Paulasto M, Kivilahti J (2011) Metallurgical reactions controlling the brazing of Al₂O₃ with Ag–Cu–Ti filler alloys. J Mater Res 13(2):343–352. https://doi.org/10.1557/jmr.1998.0046CrossRef

18.

Mandal S, Rao V, Ray AK (2004) Characterization of the brazed joint interface between Al₂O₃ and (Ag-Cu-Ti). J Mater Sci 39(16–17):5587–5590. https://doi.org/10.1023/B:Jmsc.0000039295.03229.25CrossRef

19.

Janickovic D, Sebo P, Duhaj P, Svec P (2001) The rapidly quenched Ag-Cu-Ti ribbons for active joining of ceramics. Mat Sci Eng a-Struct 304:569–573. https://doi.org/10.1016/S0921-5093(00)01536-7CrossRef

20.

Santella ML, Horton JA, Pak JJ (1990) Microstructure of alumina brazed with a silver-copper-titanium alloy. J Am Ceram Soc 73(6):1785–1787. https://doi.org/10.1111/j.1151-2916.1990.tb09835.xCrossRef

21.

Tressler RE, Moore TL, Crane RL (1973) Reactivity and interface characteristics of titanium-alumina composites. J Mater Sci 8(2):151–161. https://doi.org/10.1007/bf00550662CrossRef

22.

Guo W, She Z, Xue H, Zhang X (2020) Effect of active Ti element on the bonding characteristic of the Ag(111)/α-Al₂O₃(0001) interface by using first principle calculation. Ceram Int 46(4):5430–5435. https://doi.org/10.1016/j.ceramint.2019.10.301CrossRef

23.

Hao HQ, Jin ZH, Wang XT (1994) The influence of brazing conditions on joint strength in Al₂O₃/Al₂O₃ bonding. J Mater Sci 29(19):5041–5046. https://doi.org/10.1007/bf01151094CrossRef

24.

Dandapat N, Ghosh S, Guha BK, Datta S, Balla VK (2016) Effect of processing parameters on thermal cycling behavior of Al₂O₃-Al₂O₃ brazed Joints. Metall Mater Trans B 47(5):2946–2953. https://doi.org/10.1007/s11663-016-0731-9CrossRef

25.

Kassam TA, Nadendla HB, Ludford N, Buisman I (2016) The effect of post-grinding heat treatment of alumina and Ag-Cu-Ti braze preform thickness on the microstructure and mechanical properties of alumina-to-alumina-brazed joints. J Mater Eng Perform 25(8):3218–3230. https://doi.org/10.1007/s11665-016-2070-zCrossRef

26.

Ali M, Knowles KM, Mallinson PM, Fernie JA (2015) Microstructural evolution and characterisation of interfacial phases in Al₂O₃/Ag–Cu–Ti/Al₂O₃ braze joints. Acta Mater 96:143–158. https://doi.org/10.1016/j.actamat.2015.05.048CrossRef

27.

Yu MH, Zhou B, Bi DB, Shaw D (2010) Preparation of graded multilayer materials and evaluation of residual stresses. Mater Design 31(5):2478–2482. https://doi.org/10.1016/j.matdes.2009.11.047CrossRef

28.

He YM, Zhang J, Sun Y, Liu CF (2010) Microstructure and mechanical properties of the Si3N4/42CrMo steel joints brazed with Ag–Cu–Ti+Mo composite filler. J Eur Ceram Soc 30(15):3245–3251. https://doi.org/10.1016/j.jeurceramsoc.2010.07.005CrossRef

29.

Lin GB, Huang JH, Zhang H, Liu HY (2013) Microstructure and mechanical performance of brazed joints of Cf/SiC composite and Ti alloy using Ag–Cu–Ti–W. Sci Technol Weld Joining 11(4):379–383. https://doi.org/10.1179/174329306x113235CrossRef

30.

Lin GB, Huang JH (2013) Brazed joints of Cf–SiC composite to Ti alloy using Ag–Cu–Ti–(Ti + C) mixed powder as interlayer. Powder Metall 49(4):345–348. https://doi.org/10.1179/174329006x113454CrossRef

31.

Lin GB, Huang JH, Zhang H, Zhao XK (2006) Joints of Cf/SiC composite to Ti-alloy with in-situ synthesized TiCx improved brazing layers. Mater Trans 47(4):1261–1263. https://doi.org/10.2320/matertrans.47.1261CrossRef

32.

Galli M, Cugnoni J, Botsis J, Janczak-Rusch J (2008) Identification of the matrix elastoplastic properties in reinforced active brazing alloys. Compos Part a-Appl S 39(6):972–978. https://doi.org/10.1016/j.compositesa.2008.03.007CrossRef

33.

Blugan G, Kuebler J, Bissig V, Janczak-Rusch J (2007) Brazing of silicon nitride ceramic composite to steel using SiC-particle-reinforced active brazing alloy. Ceram Int 33(6):1033–1039. https://doi.org/10.1016/j.ceramint.2006.03.010CrossRef

34.

Yang JG, Fang HY, Wan X (2005) Al₂O₃/Al₂O₃ joint brazed with Al₂O₃-particulate-contained composite Ag-Cu-Ti filler material. J Mater Sci Technol 21(5):782–784

35.

Xiong J, Huang J, Wang Z, Lin G, Zhang H, Zhao X (2013) Joining of Cf/SiC composite to Ti alloy using composite filler materials. Mater Sci Tech-Lond 25(8):1046–1050. https://doi.org/10.1179/174328408x378889CrossRef

36.

Zhu M, Chung DDL (1994) Active brazing alloy containing carbon fibers for metal-ceramic joining. J Am Ceram Soc 77(10):2712–2720. https://doi.org/10.1111/j.1151-2916.1994.tb04666.xCrossRef

37.

Zhu M, Chung DDL (1997) Improving the strength of brazed joints to alumina by adding carbon fibres. J Mater Sci 32(20):5321–5333. https://doi.org/10.1023/a:1018666827969CrossRef

38.

Lin G, Huang J, Zhang H (2007) Joints of carbon fiber-reinforced SiC composites to Ti-alloy brazed by Ag–Cu–Ti short carbon fibers. J Mater Process Technol 189(1–3):256–261. https://doi.org/10.1016/j.jmatprotec.2007.01.031CrossRef

39.

Xu JA, Li ZY, Zhu WH, Liu ZL, Liu WJ (2007) Investigation on microstructural characterization of in situ TiB/Al metal matrix composite by laser cladding. Mat Sci Eng a-Struct 447(1–2):307–313. https://doi.org/10.1016/j.msea.2006.10.057CrossRef

40.

Yang M, Lin T, He P (2012) Microstructure evolution of Al₂O₃/Al₂O₃ joint brazed with Ag–Cu–Ti+B+TiH2 composite filler. Ceram Int 38(1):289–294. https://doi.org/10.1016/j.ceramint.2011.07.005CrossRef

41.

Kim MD, Muhamad FRW, Raju K, Kim S, Yu JH, Park CD, Yoon DH (2018) Efficacy of Ag-CuO filler tape for the reactive air brazing of ceramic-metal joints. J Korean Ceram Soc 55(5):492–497. https://doi.org/10.4191/kcers.2018.55.5.05CrossRef

42.

Si X, Cao J, Kiebach R, Xu Y, Xu H, Talic B, Feng J (2018) Joining of solid oxide fuel/electrolysis cells at low temperature: a novel method to obtain high strength seals already at 300 °C. J Power Sources 400:296–304. https://doi.org/10.1016/j.jpowsour.2018.08.046CrossRef

43.

Le S, Shen Z, Zhu X, Zhou X, Yan Y, Sun K, Zhang N, Yuan Y, Mao Y (2010) Effective Ag–CuO sealant for planar solid oxide fuel cells. J Alloy Compd 496(1–2):96–99. https://doi.org/10.1016/j.jallcom.2010.01.131CrossRef

44.

Scott Weil K, Coyle CA, Kim JY, Hardy JS (2011) The effect of composition on the wetting behavior and joint strength of the Ag-CuO reactive air braze. MRS Proceedings 756. https://doi.org/10.1557/proc-756-ff4.4

45.

Singh RN (2006) High-temperature seals for solid oxide fuel cells (SOFC). J Mater Eng Perform 15(4):422–426. https://doi.org/10.1361/105994906x117224CrossRef

46.

Si XQ, Cao JA, Song XG, Qu Y, Feng JC (2017) Reactive air brazing of YSZ ceramic with novel Al₂O₃ nanoparticles reinforced Ag-CuO-Al₂O₃ composite filler: Microstructure and joint properties. Mater Design 114:176–184. https://doi.org/10.1016/j.matdes.2016.10.062CrossRef

47.

Luo Y, Song XG, Hu SP, Xu ZQ, Li ZH, Lei Y (2021) Reactive air brazing of Al₂O₃ ceramic with Ag-CuO-Pt composite fillers: microstructure and joint properties. J Eur Ceram Soc 41(2):1407–1414. https://doi.org/10.1016/j.jeurceramsoc.2020.10.008CrossRef

48.

Kohama K (2020) Joining of alumina ceramics using silicon–magnesium composite filler for high-temperature applications. Sci Technol Weld Joining 25(5):383–390. https://doi.org/10.1080/13621718.2020.1714874CrossRef

49.

Li YX, Chen C, Yi RX, Ouyang YW (2020) Review: special brazing and soldering. J Manuf Process 60:608–635. https://doi.org/10.1016/j.jmapro.2020.10.049CrossRef

50.

Xiao Y, Zhang YQ, Zhao K, Li S, Wang L, Xiao J, Liu L (2017) Ultrasound-assisted soldering of alumina using Ni-foam reinforced Sn-based composite solders. Ceram Int 43(16):14314–14320. https://doi.org/10.1016/j.ceramint.2017.07.185CrossRef

51.

Lu Y, Zhu MX, Zhang Q, Hu T, Wang J, Zheng KH (2020) Microstructure evolution and bonding strength of the Al₂O₃/Al₂O₃ interface brazed via Ni-Ti intermetallic phases. J Eur Ceram Soc 40(4):1496–1504. https://doi.org/10.1016/j.jeurceramsoc.2019.11.066CrossRef

52.

Maciel T, Chang I, Strangwood M, de, (2006) Castro WB Brazing of Al₂O₃ with rapidly solidified melt spun Ni-Cr-P alloy ribbons. Materials science forum. Trans Tech Publ, pp 473–477

53.

Chen ZB, Bian H, Niu CN, Song XG, Lei YZ, Jin C, Cao J, Feng JC (2018) Wetting and brazing of chromium film-deposited alumina using AgCu filler metal. J Mater Eng Perform 27(10):5470–5477. https://doi.org/10.1007/s11665-018-3557-6CrossRef

54.

Ma BY, Tan ZX, Qi XB, Li RB, Li GY, Shang HL (2020) Direct brazing of Al₂O₃ without reaction layer by self-removing oxide film aluminum foil solder. J Ceram Soc Jpn 128(6):305–309. https://doi.org/10.2109/jcersj2.19223CrossRef

55.

Bengisu M, Fahrenholtz W (2004) Reactive joining of alumina by oxidation of Al interlayers. Key Engineering Materials. Trans Tech Publ, pp 655–658

56.

Voytovych R, Robaut F, Eustathopoulos N (2006) The relation between wetting and-interfacial chemistry in the CuAgTi/alumina system. Acta Mater 54(8):2205–2214. https://doi.org/10.1016/j.actamat.2005.11.048CrossRef

57.

Laik A, Mishra P, Bhanumurthy K, Kale GB, Kashyap BP (2013) Microstructural evolution during reactive brazing of alumina to Inconel 600 using Ag-based alloy. Acta Mater 61(1):126–138. https://doi.org/10.1016/j.actamat.2012.09.040CrossRef

58.

Li JQ, Xiao P (2002) Joining alumina using an alumina/metal composite. J Eur Ceram Soc 22(8):1225–1233. https://doi.org/10.1016/S0955-2219(01)00428-9CrossRef

59.

He F, Cheng J-s, Deng D-w, Wang J (2010) Structure of Bi₂O₃-ZnO-B₂O₃ system low-melting sealing glass. J Cent South Univ Technol 17(2):257–262. https://doi.org/10.1007/s11771-010-0039-xCrossRef

60.

Bale S, Rahman S, Awasthi A, Sathe V (2008) Role of Bi2O3 content on physical, optical and vibrational studies in Bi₂O₃–ZnO–B₂O₃ glasses. J Alloys Compd 460(1–2):699–703CrossRef

61.

Fernie JA, Drew RAL, Knowles KM (2009) Joining of engineering ceramics. Int Mater Rev 54(5):283–331. https://doi.org/10.1179/174328009x461078CrossRef

62.

Casalegno V, Kondo S, Hinoki T, Salvo M, Czyrska-Filemonowicz A, Moskalewicz T, Katoh Y, Ferraris M (2018) CaO-Al₂O₃ glass-ceramic as a joining material for SiC based components: a microstructural study of the effect of Si-ion irradiation. J Nucl Mater 501:172–180. https://doi.org/10.1016/j.jnucmat.2018.01.033CrossRef

63.

Geetha K, Umarji AM, Kutty TRN (2000) Ceramic joining through reactive wetting of alumina with calcium aluminate refractory cements. B Mater Sci 23(4):243–248. https://doi.org/10.1007/Bf02720077CrossRef

64.

Zhu WW, Chen JC, Jiang CH, Hao CY, Zhang JS (2013) Joining of porous alumina with a CaO-Al₂O₃-SiO₂ glass-ceramic. J Am Ceram Soc 96(6):1738–1744. https://doi.org/10.1111/jace.12310CrossRef

65.

Zhu W, Chen J, Hao C, Zhang J (2014) Microstructure and strength of Al₂O₃/Al₂O₃ joints bonded with ZnO–Al₂O₃–B₂O₃–SiO₂ glass–ceramic. J Mater Sci Technol 30(9):944–948. https://doi.org/10.1016/j.jmst.2014.01.011CrossRef

66.

Zhu WW, Zhang H, Xue DH, Jiang HF, Ran X (2019) Joining alumina ceramic by using glass ceramic filler with high crystallinity for high temperature application. Ceram Int 45(16):20999–21003. https://doi.org/10.1016/j.ceramint.2019.06.285CrossRef

67.

Wang C, Lin PP, Liu X, Li G, Lin TS, He P, Long WM, Liu HZ (2020) Microstructure evolution and cooperative reinforcement mechanisms of Al₂O₃/Al₂O₃ joints brazed by low-melting borosilicate glass. Ceram Int 46(1):186–195. https://doi.org/10.1016/j.ceramint.2019.08.247CrossRef

68.

Guo W, Lin TS, He P, Wang T, Wang YN (2017) Microstructure evolution and mechanical properties of ZnAl₂O₄-reinforced Al₂O₃/Al₂O₃ joints brazed with a bismuth borate zinc glass. Mater Design 119:303–310. https://doi.org/10.1016/j.matdes.2017.01.053CrossRef

69.

Guo W, Fu L, He P, Lin TS, Wan ML, Hou J, Wu YH, Liu XC, Shen ZK (2019) Air-brazed Al₂O₃ joint with a novel bismuth glass. Ceram Int 45(12):15213–15222. https://doi.org/10.1016/j.ceramint.2019.05.007CrossRef

70.

Niu W, Chen Q, Lin P, Cui J, Lin T, Guo W, He P, Ai C, Zhuang Y, Chen L, Duan X (2020) The formation mechanism of pores and unbonding in the Al₂O₃/Al₂O₃ joints brazed by 50Bi₂O₃–35B₂O₃–15ZnO glass. Ceram Int 46(5):5575–5585. https://doi.org/10.1016/j.ceramint.2019.10.277CrossRef

71.

Guo RS, Guo DL, Zhao D, Yang ZF, Chen YR (2002) Low temperature ageing in water vapor and mechanical properties of ZTA ceramics. Mater Lett 56(6):1014–1018. https://doi.org/10.1016/S0167-577x(02)00666-3CrossRef

72.

Ganesh I, Olhero SM, Torres PMC, Alves FJ, Ferreira JMF (2009) Hydrolysis-induced aqueous gelcasting for near-net shape forming of ZTA ceramic composites. J Eur Ceram Soc 29(8):1393–1401. https://doi.org/10.1016/j.jeurceramsoc.2008.08.033CrossRef

73.

Fukushima KA, Sadoun MJ, Cesar PF, Mainjot AK (2014) Residual stress profiles in veneering ceramic on Y-TZP, alumina and ZTA frameworks: measurement by hole-drilling. Dent Mater 30(2):105–111. https://doi.org/10.1016/j.dental.2013.10.005CrossRef

74.

Wang N, Wang DP, Yang ZW, Wang Y, Liu XG (2017) Zirconia ceramic and Nb joints brazed with Mo-particle-reinforced Ag-Cu-Ti composite fillers: interfacial microstructure and formation mechanism. Ceram Int 43(13):9636–9643. https://doi.org/10.1016/j.ceramint.2017.04.133CrossRef

75.

Zheng KH, Zhang Q, Wang J, Lu Y (2021) Microstructural characterization and mechanical properties of ZTA/ZTA joint brazed by Ni50Ti50 filler metal. Ceram Int 47(2):2758–2765. https://doi.org/10.1016/j.ceramint.2020.09.129CrossRef

76.

Zheng KH, Zhang Q, Wang J, Lu Y (2021) Interfacial microstructure and mechanical properties of ZTA/ZTA joints brazed with Ni-Ti filler metal. J Eur Ceram Soc 41(3):2076–2084. https://doi.org/10.1016/j.jeurceramsoc.2020.10.073CrossRef

77.

Esposito L, Bellosi A (2001) Joining of ceramic oxides by liquid wetting and capillarity. Scripta Mater 45(7):759–766. https://doi.org/10.1016/S1359-6462(01)01092-2CrossRef

78.

Guo CH, Zhu WW, Shen YX, Sui Q, Liu YD, Ran X (2020) Joining ZTA ceramic by using Dy₂O₃-Al₂O₃-SiO₂ glass ceramic filler. J Eur Ceram Soc 40(15):5819–5828. https://doi.org/10.1016/j.jeurceramsoc.2020.06.011CrossRef

79.

Ma C, Ding W, Xu J, Fu Y (2015) Influence of alumina bubble particles on microstructure and mechanical strength in porous Cu–Sn–Ti metals. Mater Des 1980–2015(65):50–56. https://doi.org/10.1016/j.matdes.2014.09.002CrossRef

80.

Zhao YX, Wang MR, Cao J, Song XG, Tang DY, Feng JC (2015) Brazing TC4 alloy to Si3N4 ceramic using nano-Si3N4 reinforced AgCu composite filler. Mater Design 76:40–46. https://doi.org/10.1016/j.matdes.2015.03.046CrossRef

81.

Mandal S, Ray AK, Ray AK (2004) Correlation between the mechanical properties and the microstructural behaviour of Al₂O₃–(Ag–Cu–Ti) brazed joints. Mater Sci Eng, A 383(2):235–244. https://doi.org/10.1016/j.msea.2004.06.002CrossRef

82.

Kozlova O, Voytovych R, Eustathopoulos N (2011) Initial stages of wetting of alumina by reactive CuAgTi alloys. Scripta Mater 65(1):13–16. https://doi.org/10.1016/j.scriptamat.2011.03.026CrossRef

83.

Lin T, Yang M, He P, Huang C, Pan F, Huang Y (2011) Effect of in situ synthesized TiB whisker on microstructure and mechanical properties of carbon–carbon composite and TiBw/Ti–6Al–4V composite joint. Mater Design 32(8–9):4553–4558. https://doi.org/10.1016/j.matdes.2011.04.028CrossRef

84.

Yang Z, Zhang L, Tian X, Liu Y, He P, Feng J (2013) Interfacial microstructure and mechanical properties of TiAl and C/SiC joint brazed with TiH2–Ni–B brazing powder. Mater Charact 79:52–59. https://doi.org/10.1016/j.matchar.2013.02.010CrossRef

85.

Wang Y, Yang ZW, Zhang LX, Wang DP, Feng JC (2015) Low-temperature diffusion brazing of actively metallized Al₂O₃ ceramic tube and 5A05 aluminum alloy. Mater Design 86:328–337. https://doi.org/10.1016/j.matdes.2015.07.112CrossRef

86.

Gorjan L, Blugan G, Boretius M, De La Pierre S, Ferraris M, Casalegno V, Rizzo S, Graule T, Kuebler J (2015) Fracture behavior of soldered Al₂O₃ ceramic to A356 aluminum alloy and resistance of the joint to low temperature exposure. Mater Design 88:889–896. https://doi.org/10.1016/j.matdes.2015.09.067CrossRef

87.

Zhang J, Zhang Q, Liu C, Wang G, Xuan Y (2015) Effect of brazing temperature on microstructure and mechanical properties of 2D Cf/SiC and Nb joints brazed with Co–Ti–Nb filler alloy. Mater Sci Eng, A 634:116–122. https://doi.org/10.1016/j.msea.2015.03.013CrossRef

88.

Niu GB, Wang DP, Yang ZW, Wang Y (2017) Microstructure and mechanical properties of Al₂O₃/TiAl joints brazed with B powders reinforced Ag-Cu-Ti based composite fillers. Ceram Int 43(1):439–450. https://doi.org/10.1016/j.ceramint.2016.09.178CrossRef

89.

Qiu Q, Wang Y, Yang Z, Wang D (2016) Microstructure and mechanical properties of Al₂O₃ ceramic and Ti6Al4V alloy joint brazed with inactive Ag–Cu and Ag–Cu + B. J Eur Ceram Soc 36(8):2067–2074. https://doi.org/10.1016/j.jeurceramsoc.2016.02.033CrossRef

90.

Wang Y, Yang ZW, Zhang LX, Wang DP, Feng JC (2016) Microstructure and mechanical properties of SiO₂-BN ceramic and Invar alloy joints brazed with Ag–Cu–Ti+TiH2+BN composite filler. Journal of Materiomics 2(1):66–74. https://doi.org/10.1016/j.jmat.2015.10.003CrossRef

91.

Zhao Y, Wang Y, Yang Z, Wang D (2019) Relief of residual stress in Al₂O₃/Nb joints brazed with Ag-Cu-Ti/Cu/Ag-Cu-Ti composite interlayer. Archives of Civil and Mechanical Engineering 19(1):1–10. https://doi.org/10.1016/j.acme.2018.08.001CrossRef

92.

Wang Y, Zhao YT, Yang ZW, Wang DP (2018) Microstructure, residual stress and mechanical properties of Al₂O₃/Nb joints vacuum-brazed with two Ag-based active fillers. Vacuum 158:14–23. https://doi.org/10.1016/j.vacuum.2018.09.028CrossRef

93.

Zhu DY, Ma ML, Jin ZH, Wang YL (1999) The effect of molybdenum net interlayer on thermal shock resistance of Al₂O₃/Nb brazed joint. J Mater Process Technol 96(1–3):19–21

94.

Yu ZS, Yang P, Li RF, Qi K (2006) Crack formation mechanisms in Al₂O₃/Kovar brazed joint. Mater Sci Tech-Lond 22(7):864–866. https://doi.org/10.1179/174328406x102435CrossRef

95.

Yu ZH, Yang P, Qi K, Li RF (2008) Effects of Mo interlayer on suppressing cracks in Al₂O₃/Kovar brazed joint. Rare Metal Mat Eng 37(12):2118–2121. https://doi.org/10.1016/S1875-5372(10)60009-4CrossRef

96.

Suenaga S, Koyama M, Arai S, Nakahashi M (2011) Solid-state reactions of the Ag–Cu–Ti thin film–Al₂O₃ substrate system. J Mater Res 8(8):1805–1811. https://doi.org/10.1557/jmr.1993.1805CrossRef

97.

Xin CL, Yan JZ, Li N, Liu WB, Du JS, Cao YT, Shi HJ (2016) Microstructural evolution during the brazing of Al₂O₃ ceramic to kovar alloy by sputtering Ti/Mo films on the ceramic surface. Ceram Int 42(11):12586–12593. https://doi.org/10.1016/j.ceramint.2016.04.094CrossRef

98.

Zhang J, Liu JY, Wang TP (2018) Microstructure and brazing mechanism of porous Si3N4/Invar joint brazed with Ag-Cu-Ti/Cu/Ag-Cu multi-layered filler. J Mater Sci Technol 34(4):713–719. https://doi.org/10.1016/j.jmst.2017.07.001CrossRef

99.

Wang Y, Jin CK, Yang ZW, Wang DP (2019) Effects of Cu interlayers on the microstructure and mechanical properties of Al₂O₃/AgCuTi/Kovar brazed joints. Int J Appl Ceram Tec 16(3):896–906. https://doi.org/10.1111/ijac.13147CrossRef

100.

Qiao GJ, Wang HJ, Gao JQ, Jin ZH (2005) Brazing Al₂O₃ to Kovar alloy with Ni/Ti/Ni interlayer and dramatic increasing of joint strength after thermal cycles. Materials Science Forum. Trans Tech Publ, pp 481–484

101.

Weng YC, Liu HX, Ji SP, Huang Q, Wu H, Li ZB, Wu ZZ, Wang HY, Tong LP, Fu RKY, Chu PK, Pan F (2018) A promising orthopedic implant material with enhanced osteogenic and antibacterial activity: Al₂O₃-coated aluminum alloy. Appl Surf Sci 457:1025–1034. https://doi.org/10.1016/j.apsusc.2018.06.233CrossRef

102.

Hussein MA, Kumar M, Drew R, Al-Aqeeli N (2018) Electrochemical corrosion and In vitro bioactivity of nano-grained biomedical Ti-20Nb-13Zr alloy in a simulated body fluid. Materials 11(1):26. https://doi.org/10.3390/ma11010026CrossRef

103.

Ozdemir Z, Ozdemir A, Basim GB (2016) Application of chemical mechanical polishing process on titanium based implants. Mater Sci Eng C Mater Biol Appl 68:383–396. https://doi.org/10.1016/j.msec.2016.06.002CrossRef

104.

Geetha M, Singh AK, Asokamani R, Gogia AK (2009) Ti based biomaterials, the ultimate choice for orthopaedic implants – a review. Prog Mater Sci 54(3):397–425. https://doi.org/10.1016/j.pmatsci.2008.06.004CrossRef

105.

Jiang G, Mishler D, Davis R, Mobley JP, Schulman JH (2005) Zirconia to Ti-6Al-4V braze joint for implantable biomedical device. J Biomed Mater Res B Appl Biomater 72(2):316–321. https://doi.org/10.1002/jbm.b.30161CrossRef

106.

Yang M, Lin T, He P, Huang Y (2011) Brazing of Al₂O₃ to Ti–6Al–4V alloy with in situ synthesized TiB-whisker-reinforced active brazing alloy. Ceram Int 37(8):3029–3035. https://doi.org/10.1016/j.ceramint.2011.05.004CrossRef

107.

Niu GB, Wang DP, Yang ZW, Wang Y (2016) Microstructure and mechanical properties of Al 2 O 3 ceramic and TiAl alloy joints brazed with Ag–Cu–Ti filler metal. Ceram Int 42(6):6924–6934. https://doi.org/10.1016/j.ceramint.2016.01.078CrossRef

108.

Yang WQ, Yang XN, Dai W, Chen LT, Lin JC, Ao R, Ma XF, Xing LL (2019) In situ TiB-network-reinforced Al₂O₃/Ti6Al4V joints. Ceram Int 45(14):18119–18123. https://doi.org/10.1016/j.ceramint.2019.05.264CrossRef

109.

Su CY, Zhuang XZ, Pan CT (2013) Al2O3/SUS304 brazing via AgCuTi-W composite as active filler. J Mater Eng Perform 23(3):906–911. https://doi.org/10.1007/s11665-013-0837-zCrossRef

110.

Yang ZW, Lin JM, Wang Y, Wang DP (2017) Characterization of microstructure and mechanical properties of Al₂O₃/TiAl joints vacuum-brazed with Ag-Cu-Ti plus W composite filler. Vacuum 143:294–302. https://doi.org/10.1016/j.vacuum.2017.06.020CrossRef

111.

Liu D, Niu HW, Zhou YH, Song XG, Tang DY, Feng JC (2015) Brazing continuous carbon fiber reinforced Li₂O–Al₂O₃–SiO₂ ceramic matrix composites to Ti–6Al–4V alloy using Ag–Cu–Ti active filler metal. Mater Design 87:42–48. https://doi.org/10.1016/j.matdes.2015.08.005CrossRef

112.

Kar A, Ray AK (2007) Characterization of Al₂O₃–304 stainless steel braze joint interface. Mater Lett 61(14–15):2982–2985. https://doi.org/10.1016/j.matlet.2006.10.058CrossRef

113.

Heo H, Kim G, Park YC, Jung K, Kang CY (2018) Effect of bonding temperature on crack occurrences in Al₂O₃/SS 430 joints using Cu-based brazing alloys. Metals-Basel 8(10):752. https://doi.org/10.3390/met8100752CrossRef

114.

Zhao BR, Li GB, Gao P, Lei TQ, Song SC, Cao XJ (2005) Influence of nickel ion implantation on the inactive braze joining abilities of Al₂O₃ ceramics. Nucl Instrum Meth B 239(3):147–151. https://doi.org/10.1016/j.nimb.2005.03.289CrossRef

115.

Chen X, Yan J, Gao F, Wei J, Xu Z, Fan G (2013) Interaction behaviors at the interface between liquid Al–Si and solid Ti–6Al–4V in ultrasonic-assisted brazing in air. Ultrason Sonochem 20(1):144–154CrossRef

116.

Xiao Y, Ji H, Li M, Kim J (2014) Ultrasound-induced equiaxial flower-like CuZn5/Al composite microstructure formation in Al/Zn–Al/Cu joint. Mater Sci Eng, A 594:135–139. https://doi.org/10.1016/j.msea.2013.11.063CrossRef

117.

Ji H, Chen H, Li M (2017) Overwhelming reaction enhanced by ultrasonics during brazing of alumina to copper in air by Zn-14Al hypereutectic filler. Ultrason Sonochem 35(Pt A):61–71. https://doi.org/10.1016/j.ultsonch.2016.09.003CrossRef

118.

Chen HY, Ren XW, Guo W, Shen ZK, Liu XC, Cao J (2020) Effects of glass composition and joining parameters on microstructural evolution and mechanical properties of Al₂O₃/Cu joints brazed with Bi₂O₃-B₂O₃-ZnO glass. J Manuf Process 56:735–745. https://doi.org/10.1016/j.jmapro.2020.05.035CrossRef

119.

Fu W, Hu SP, Song XG, Jin C, Li JX, Zhao YX, Cao J, Wang GD (2017) Effect of Ti content on the metallization layer and copper/alumina brazed joint. Ceram Int 43(16):13206–13213. https://doi.org/10.1016/j.ceramint.2017.07.016CrossRef

120.

Dobrovinskaya ER, Lytvynov LA, Pishchik V (2009) Sapphire: material, manufacturing, applications. Springer Science & Business Media

121.

Gurel K, Wittwer VJ, Hakobyan S, Schilt S, Sudmeyer T (2017) Carrier envelope offset frequency detection and stabilization of a diode-pumped mode-locked Ti:sapphire laser. Opt Lett 42(6):1035–1038. https://doi.org/10.1364/Ol.42.001035CrossRef

122.

Liu S, Wang ZP, Cui W, Dai Y, Li DD (2014) Sealing of sapphire infrared windows by ultrasonic interfacial deposition soldering. Advanced Materials Research. Trans Tech Publ, pp 2074–2078

123.

Lin ZQ, Wang GG, Tian JL, Wang LY, Zhao DD, Liu Z, Han JC (2018) Broad-band anti-reflective pore-like sub-wavelength surface nanostructures on sapphire for optical windows. Nanotechnology 29(5):055302. https://doi.org/10.1088/1361-6528/aa9d14CrossRef

124.

Drozhzhin OA, Tereshchenko IV, Emerich H, Antipov EV, Abakumov AM, Chernyshov D (2018) An electrochemical cell with sapphire windows for operando synchrotron X-ray powder diffraction and spectroscopy studies of high-power and high-voltage electrodes for metal-ion batteries. J Synchrotron Radiat 25(Pt 2):468–472. https://doi.org/10.1107/S1600577517017489CrossRef

125.

Horng RH, Chiang CC, Hsiao HY, Zheng X, Wuu DS, Lin HI (2008) Improved thermal management of GaN/sapphire light-emitting diodes embedded in reflective heat spreaders. Appl Phys Lett 93(11):111907. https://doi.org/10.1063/1.2983740CrossRef

126.

Sarkisyan D, Sarkisyan AS, Guena J, Lintz M, Bouchiat MA (2005) Alkali-vapor cell with metal coated windows for efficient application of an electric field. Rev Sci Instrum 76(5):053108. https://doi.org/10.1063/1.1914780CrossRef

127.

Saiz E, Cannon RM, Tomsia AP (2000) Reactive spreading: adsorption, ridging and compound formation. Acta Mater 48(18–19):4449–4462. https://doi.org/10.1016/S1359-6454(00)00231-7CrossRef

128.

Stephens JJ, Hosking FM, Headley TJ, Hlava PF, Yost FG (2003) Reaction layers and mechanisms for a Ti-activated braze on sapphire. Metall Mater Trans A 34a(12):2963–2972. https://doi.org/10.1007/s11661-003-0195-9

129.

Ning HL, Geng ZT, Ma JS, Huang FX, Qian ZY, Han ZD (2003) Joining of sapphire and hot pressed Al₂O₃ using Ag70.5Cu27.5Ti2 brazing filler metal. Ceram Int 29(6):689–694. https://doi.org/10.1016/S0272-8842(02)00218-3

130.

Ali M, Knowles KM, Mallinson PM, Fernie JA (2016) Interfacial reactions between sapphire and Ag–Cu–Ti-based active braze alloys. Acta Mater 103:859–869. https://doi.org/10.1016/j.actamat.2015.11.019CrossRef

131.

Cui B, Huang JH, Xiong JH, Zhang H (2013) Reaction-composite brazing of carbon fiber reinforced SiC composite and TC4 alloy using Ag–Cu–Ti–(Ti+ C) mixed powder. Mater Sci Eng, A 562:203–210CrossRef

132.

Fan Z, Zhang K, Liu J, Hu M, Yang C (2020) Microstructure and mechanical properties of Ti6Al4V alloy and sapphire joint brazed with graphene-AgCuTi. Materials Research Express 6(12). https://doi.org/10.1088/2053-1591/ab6190

133.

Li C, Si XQ, Chen L, Qi JL, Liu ZG, Huang YX, Dong ZB, Feng JC, Cao J (2019) Non-destructive measurement of residual stress distribution as a function of depth in sapphire/Ti6Al4V brazing joint via Raman spectra. Ceram Int 45(3):3284–3289. https://doi.org/10.1016/j.ceramint.2018.10.237CrossRef

134.

Feng KY, Mu DK, Liao XJ, Huang H, Xu XP (2018) Brazing sapphire/sapphire and sapphire/copper sandwich joints using Sn-Ag-Ti active solder alloy. Solid State Phenom 273:187–193. https://doi.org/10.4028/www.scientific.net/SSP.273.187CrossRef

135.

Mu D, Feng K, Lin Q, Huang H (2019) Low-temperature wetting of sapphire using Sn–Ti active solder alloys. Ceram Int 45(17):22175–22182. https://doi.org/10.1016/j.ceramint.2019.07.239CrossRef

136.

Xin CL, Li N, Yan JZ (2017) Microstructural evolution in the braze joint of sapphire to Kovar alloy by Ti-Cu metallization layer. J Mater Process Technol 248:115–122. https://doi.org/10.1016/j.jmatprotec.2017.05.016CrossRef

137.

Guo W, Fu L, Lin TS, He P, Wang CY, Wang T, Liu HZ (2019) New design of sapphire joints brazed with bismuth-borate glass. Ceram Int 45(4):5036–5049. https://doi.org/10.1016/j.ceramint.2018.11.205CrossRef

138.

Guo W, Hou J, Wan ML, Fu L, Lin TS, He P (2021) Microstructural evolution, mechanical properties, and FEM analysis of the residual stress of sapphire joints brazed with a novel borate glass. Ceram Int 47(5):6699–6710. https://doi.org/10.1016/j.ceramint.2020.11.010CrossRef

139.

Guo W, Hou J, Wan M, Fu L, Lin T, He P (2021) Crystallization behaviour of 25Bi₂O₃–75B₂O₃ glass braze and strengthening mechanism of crystallization-reinforced sapphire/25Bi₂O₃–75B₂O₃/sapphire joints. J Market Res 10:538–551. https://doi.org/10.1016/j.jmrt.2020.12.001CrossRef

140.

Guo W, Wang T, Lin TS, Guo S, He P (2018) Bismuth borate zinc glass braze for bonding sapphire in air. Mater Charact 137:67–76. https://doi.org/10.1016/j.matchar.2018.01.002CrossRef

141.

Guo W, Wang T, Lin T, He P (2018) Bonding sapphire in air by using Bi₂O₃–B₂O₃ glass braze. Mater Lett 210:117–120. https://doi.org/10.1016/j.matlet.2017.09.019CrossRef

142.

Komarov SV, Kuwabara M, Abramov OV (2005) High power ultrasonics in pyrometallurgy: Current status and recent development. ISIJ Int 45(12):1765–1782. https://doi.org/10.2355/isijinternational.45.1765CrossRef

143.

Yao Y, Pan Y, Liu S (2020) Power ultrasound and its applications: a state-of-the-art review. Ultrason Sonochem 62:104722. https://doi.org/10.1016/j.ultsonch.2019.104722CrossRef

144.

Vianco P, Hosking F, Rejent J (1996) Ultrasonic soldering for structural and electronic applications. Welding Journal-Including Welding Research Supplement 75(11):343s

145.

Tsujino J, Ueoka T, Hasegawa K, Fujita Y, Shiraki T, Okada T, Tamura T (1996) New methods of ultrasonic welding of metal and plastic materials. Ultrasonics 34(2–5):177–185. https://doi.org/10.1016/0041-624x(96)81780-xCrossRef

146.

Xu Y, Ma X, Tang H, Yan J (2020) Mechanism of the interfacial reaction between sapphire and Sn-3.5Ag-4Ti solder at a low temperature in air by ultrasound. Ceram Int 46(4):4435–4443. https://doi.org/10.1016/j.ceramint.2019.10.169

147.

Xu Y, Ma X, Xiu Z, Yan J (2021) Bonding and strengthening mechanism on ultrasonic-assisted soldering of sapphire using Sn-3.5Ag-4Al solder. J Mater Process Technol 288:116893. https://doi.org/10.1016/j.jmatprotec.2020.116893

148.

Cui W, Li S, Yan J, He J, Liu Y (2015) Ultrasonic-assisted brazing of sapphire with high strength Al–4.5 Cu–1.5 Mg alloy. Ceram Int 41 (6):8014–8022

149.

Cui W, Li SQ, Yan JC, Zhang X (2018) Microstructure and mechanical performance of composite joints of sapphire by ultrasonic-assisted brazing. J Mater Process Technol 257:1–6. https://doi.org/10.1016/j.jmatprotec.2018.02.011CrossRef

150.

Shalz M, Dalgleish B, Tomsia A, Glaeser AJJoms (1994) Ceramic joining II Partial transient liquid-phase bonding of alumina via Cu/Ni/Cu multilayer interlayers. 29(12):3200–3208

151.

Paulasto M, Ceccone G, Peteves SJSm (1997) Joining of silicon nitride via a transient liquid. 36 (10)

152.

Hong SM, Glaeser AM (2006) Reduced-temperature transient-liquid-phase bonding of alumina using a Ag-Cu-based brazing alloy. In, 2006. Proceedings of the 3rd International Brazing & Soldering Conference, ASM International, San Antonio, Texas, pp 181–188

153.

Hong SM, Reynolds TB, Bartlow CC, Glaeser AM (2010) Rapid transient-liquid-phase bonding of Al2O3 with microdesigned Ni/Nb/Ni interlayers. Int J Mater Res 101(1):133–142. https://doi.org/10.3139/146.110249CrossRef

154.

Valenza F, Muolo ML, Passerone A, Glaeser AM (2013) Wetting and interfacial phenomena in relation to joining of alumina via Co/Nb/Co interlayers. J Eur Ceram Soc 33(3):539–547. https://doi.org/10.1016/j.jeurceramsoc.2012.10.009CrossRef

155.

Chang LS, Huang CF (2004) Transient liquid phase bonding of alumina to alumina via boron oxide interlayer. Ceram Int 30(8):2121–2127. https://doi.org/10.1016/j.ceramint.2003.11.018CrossRef

156.

Lo PL, Chang LS, Lu YF (2009) High strength alumina joints via transient liquid phase bonding. Ceram Int 35(8):3091–3095. https://doi.org/10.1016/j.ceramint.2009.04.019CrossRef

157.

Dehkordi OB, Hadian AM (2013) Transient liquid phase bonding of alumina to alumina via bismuth oxide interlayer. Adv Mater Res 829:136–140. https://doi.org/10.4028/www.scientific.net/AMR.829.136CrossRef

158.

Dehkordi OB, Hadian AM (2016) Effect of time and temperature on TLP bonding of alumina using a bismuth oxide interlayer. Ceram Int 42(1):1705–1712. https://doi.org/10.1016/j.ceramint.2015.09.127CrossRef

159.

Simões SJM (2018) Recent progress in the joining of titanium alloys to ceramics 8(11):876

160.

Torrisi V, Ruffino FJS, Technology C (2017) Nanoscale structure of submicron-thick sputter-deposited Pd films: effect of the adatoms diffusivity by the film-substrate interaction 315:123–129

Titel: The brazing of Al2O3 ceramic and other materials
verfasst von: Yuxiang Li
Chao Chen
Ruixiang Yi
Linzhe He
Publikationsdatum: 08.02.2022
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 1-2/2022
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-022-08789-x

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1-2/2022

Fracture characteristics of the laser bonding joint between the aluminum alloy and the CFRTP with preset aluminum alloy sheet

Thermal behavior simulation and stabilization for a mechanical spindle with external cooler across grease-coated interface

Electrorheological fluid–assisted ultrasonic polishing for IN625 additively manufactured surfaces

A novel method for machine tool structure condition monitoring based on knowledge graph

Optimal trajectory generation method to find a smooth robot joint trajectory based on multiquadric radial basis functions

Research on the axial elongation and springback law of thick-walled tubes in cold bending forming

Premium Partner

Marktübersichten