nach oben

Journal of Polymer Research

Erschienen in:

01.11.2023 | Review paper

Ultrasound assisted synthesis of polymer nanocomposites: a review

verfasst von: Vishnu Soman, Kavita Vishwakarma, Maneesh Kumar Poddar

Erschienen in: Journal of Polymer Research | Ausgabe 11/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The potential of ultrasonication as a technique to enhance the production of polymer nanocomposites is examined in this review paper. Polymer nanocomposites have been widely employed in recent years because of their remarkable mechanical, electrical, and optical properties. The article focuses on the application of several synthesis techniques, including solvent casting, 3D printing, electrospinning, and template synthesis. It has been established that uniformly dispersing nanoparticles inside the polymer matrix during ultrasonication can greatly improve the quality of nanocomposites. Recent research has shown that nanocomposites made using ultrasonication have improved mechanical and thermal stability. However, scaling up these techniques remains a challenge and requires further research.

Vorheriger Artikel Tuning the porosity of hypercrosslinked styrene-divinylbenzene copolymers for efficient adsorption of rifampicin from aqueous media

Nächster Artikel APDS modified several bisphenol A polyimides with low dielectric constant under high frequency

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Sundarram S, Kim YH, Li W (2015) Preparation and characterization of poly(ether imide) nanocomposites and nanocomposite foams. Manuf Nanocompos Eng Plast Elsevier 61–85.https://doi.org/10.1016/B978-1-78242-308-9.00004-5

Jiménez A, Vargas M, Chiralt A (2016) Antimicrobial nanocomposites for food packaging applications: novel approaches. Novel Approach Nanotechnol Food 347–386. https://doi.org/10.1016/B978-0-12-804308-0.00011-X

Kumar K, Ghosh PK, Kumar A (2016) Improving mechanical and thermal properties of TiO2-epoxy nanocomposite. Compos B Eng 97:353–360. https://doi.org/10.1016/J.COMPOSITESB.2016.04.080CrossRef

Sanchez C, Lebeau B, Chaput F, Boilot J-P (2003) Optical Properties of Functional Hybrid Organic-Inorganic Nanocomposites. Adv Mater 15(23):1969–1994. https://doi.org/10.1002/adma.200300389CrossRef

Njuguna J, Pielichowski K (2003) Polymer Nanocomposites for Aerospace Applications: Properties. Adv Eng Mater 5(11):769–778. https://doi.org/10.1002/adem.200310101CrossRef

Mosmeri H, Tasharrofi S, Alaie E, Hassani SS (2018) Controlled-release oxygen nanocomposite for bioremediation of benzene contaminated groundwater. New Polym Nanocompos Environ Remed 601–622. https://doi.org/10.1016/B978-0-12-811033-1.00023-8

Ji L, Meduri P, Agubra V, Xiao X, Alcoutlabi M (2016) Graphene-Based Nanocomposites for Energy Storage. Adv Energy Mater 6(16):1502159. https://doi.org/10.1002/aenm.201502159CrossRef

Haghighi H, Licciardello F, Fava P, Siesler HW, Pulvirenti A (2020) Recent advances on chitosan-based films for sustainable food packaging applications. Food Packag Shelf Life 26

Holder E, Tessler N, Rogach AL (2008) Hybrid nanocomposite materials with organic and inorganic components for opto-electronic devices. J Mater Chem 18(10):1064. https://doi.org/10.1039/b712176hCrossRef

10.

Feldman D (2016) Polymer nanocomposites in medicine. J Macromol Sci Part A 53(1):55–62. https://doi.org/10.1080/10601325.2016.1110459CrossRef

11.

Rhim J-W, Ng PKW (2007) Natural Biopolymer-Based Nanocomposite Films for Packaging Applications. Crit Rev Food Sci Nutr 47(4):411–433. https://doi.org/10.1080/10408390600846366CrossRefPubMed

12.

Di Y, Iannace S, di Maio E, Nicolais L (2003) Nanocomposites by melt intercalation based on polycaprolactone and organoclay. J Polym Sci B Polym Phys 41(7):670–678. https://doi.org/10.1002/polb.10420CrossRef

13.

Liu X, Wu Q (2001) PP/clay nanocomposites prepared by grafting-melt intercalation. Polymer (Guildf) 42(25):10013–10019. https://doi.org/10.1016/S0032-3861(01)00561-4CrossRef

14.

Bhanvase BA, Sonawane SH (2014) Ultrasound assisted in situ emulsion polymerization for polymer nanocomposite: A review. Chem Eng Proc Proc Intensific 85:86–107. https://doi.org/10.1016/j.cep.2014.08.007

15.

Pomogailo AD (2005) Polymer Sol-Gel Synthesis of Hybrid Nanocomposites. Colloid J 67(6):658–677. https://doi.org/10.1007/s10595-005-0148-7CrossRef

16.

Amiri S, Rahimi A (2016) Hybrid nanocomposite coating by sol–gel method: a review. Iranian Polym J 25(6):559–577. https://doi.org/10.1007/s13726-016-0440-xCrossRef

17.

Chandra A, Turng L-S, Gopalan P, Rowell RM, Gong S (2008) Study of utilizing thin polymer surface coating on the nanoparticles for melt compounding of polycarbonate/alumina nanocomposites and their optical properties. Compos Sci Technol 68(3–4):768–776. https://doi.org/10.1016/j.compscitech.2007.08.027CrossRef

18.

Philip MA, Natarajan U, Nagarajan R (2014) Acoustically-enhanced particle dispersion in polystyrene/alumina nanocomposites. Adv Nano Res 2(2):121–133. https://doi.org/10.12989/anr.2014.2.2.121CrossRef

19.

Pinjari DV, Pandit AB (2010) Cavitation milling of natural cellulose to nanofibrils. Ultrason Sonochem 17(5):845–852. https://doi.org/10.1016/J.ULTSONCH.2010.03.005CrossRefPubMed

20.

Price GJ, Nawaz M, Yasin T, Bibi S (2018) Sonochemical modification of carbon nanotubes for enhanced nanocomposite performance. Ultrason Sonochem 40:123–130. https://doi.org/10.1016/J.ULTSONCH.2017.02.021CrossRefPubMed

21.

Badnore AU, Pandit AB (2015) Synthesis of nanosized calcium carbonate using reverse miniemulsion technique: Comparison between sonochemical and conventional method. Chem Eng Proc Proc Intensific 98:13–21. https://doi.org/10.1016/J.CEP.2015.10.003CrossRef

22.

Rennhofer H, Zanghellini B (2021) Dispersion State and Damage of Carbon Nanotubes and Carbon Nanofibers by Ultrasonic Dispersion: A Review. Nanomaterials 11(6):1469. https://doi.org/10.3390/nano11061469CrossRefPubMedPubMedCentral

23.

Pollet BG, Ashokkumar M (2019) Introduction to Ultrasound, Sonochemistry and Sonoelectrochemistry. Cham: Springer International Publishing. https://doi.org/10.1007/978-3-030-25862-7

24.

Agarwal US, Nisal A, Joseph R (2007) PET-SWNT nanocomposites through ultrasound assisted dissolution-evaporation.Eur Polym J 43(6):2279–2285. https://doi.org/10.1016/j.eurpolymj.2007.03.020

25.

Raso J, Mañas P, Pagán R, Sala FJ (1999) Influence of different factors on the output power transferred into medium by ultrasound. Ultrason Sonochem 5(4):157–162. https://doi.org/10.1016/S1350-4177(98)00042-XCrossRefPubMed

26.

Huang J, Yang Z, Yang B, Wang R, Wang T (2014) Ultrasound assisted polymerization for synthesis of ZnO/Polypyrrole composites for zinc/nickel rechargeable battery. J Power Sour 271:143–151. https://doi.org/10.1016/j.jpowsour.2014.07.140CrossRef

27.

Lahelin M, Annala M, Nykänen A, Ruokolainen J, Seppälä J (2011) In situ polymerized nanocomposites: Polystyrene/CNT and Poly(methyl methacrylate)/CNT composites. Compos Sci Technol 71(6):900–907. https://doi.org/10.1016/j.compscitech.2011.02.005CrossRef

28.

Santos HM, Lodeiro C, Capelo-Martinez JL (2009) The Power of Ultrasound. In Ultrasound in Chemistry, Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, pp. 1–16. https://doi.org/10.1002/9783527623501.ch1

29.

Santos H, Capelo J (2007) Trends in ultrasonic-based equipment for analytical sample treatment. Talanta 73(5):795–802. https://doi.org/10.1016/j.talanta.2007.05.039CrossRefPubMed

30.

Frømyr TR, Hansen FK, Olsen T (2012) The Optimum Dispersion of Carbon Nanotubes for Epoxy Nanocomposites: Evolution of the Particle Size Distribution by Ultrasonic Treatment. J Nanotechnol 2012:1–14. https://doi.org/10.1155/2012/545930CrossRef

31.

Ávila-Orta CA et al (2019) ‘Ultrasound-Assisted Melt Extrusion of Polymer Nanocomposites’, in Nanocomposites - Recent Evolutions IntechOpen. https://doi.org/10.5772/intechopen.80216CrossRef

32.

Rane AV, Kanny K, Abitha VK, Thomas S (2018) Methods for Synthesis of Nanoparticles and Fabrication of Nanocomposites. In Synthesis of Inorganic Nanomaterials, Elsevier, pp. 121–139. https://doi.org/10.1016/B978-0-08-101975-7.00005-1

33.

Adnan M, Dalod A, Balci M, Glaum J, Einarsrud M-A (2018) In Situ Synthesis of Hybrid Inorganic-Polymer Nanocomposites. Polymers (Basel) 10(10):1129. https://doi.org/10.3390/polym10101129CrossRefPubMedPubMedCentral

34.

Guo Q et al (2014) Comparison of in Situ and ex Situ Methods for Synthesis of Two-Photon Polymerization Polymer Nanocomposites. Polymers (Basel) 6(7):2037–2050. https://doi.org/10.3390/polym6072037CrossRef

35.

Cao Y, Zheng Y, Pan G (2008) Radical generation process studies of the cationic surfactants in ultrasonically irradiated emulsion polymerization. Ultrason Sonochem 15(4):320–325. https://doi.org/10.1016/j.ultsonch.2007.07.002CrossRefPubMed

36.

Bhanvase BA, Pinjari DV, Gogate PR, Sonawane SH, Pandit AB (2012) Synthesis of exfoliated poly(styrene-co-methyl methacrylate)/montmorillonite nanocomposite using ultrasound assisted in situ emulsion copolymerization. Chem Eng J 181–182:770–778. https://doi.org/10.1016/j.cej.2011.11.084CrossRef

37.

Dhatarwal P, Sengwa RJ (2021) Superior optical and dielectric properties of ultrasonic-assisted solution-cast prepared PMMA/MMT nanocomposite films. Funct Compos Struct 3(2)

38.

Cherifi Z et al (2023) Ultrasound-promoted preparation of cellulose acetate/organophilic clay bio-nanocomposites films by solvent casting method. Polym Bull 80(2):1831–1843. https://doi.org/10.1007/s00289-022-04129-xCrossRef

39.

Dinari M, Mallakpour S (2014) Ultrasound-assisted one-pot preparation of organo-modified nano-sized layered double hydroxide and its nanocomposites with polyvinylpyrrolidone. J Polym Res 21(2):350. https://doi.org/10.1007/s10965-013-0350-yCrossRef

40.

Mallakpour S, Dinari M (2013) Enhancement in thermal properties of poly(vinyl alcohol) nanocomposites reinforced with Al ₂ O ₃ nanoparticles. J Reinf Plast Compos 32(4):217–224. https://doi.org/10.1177/0731684412467236CrossRef

41.

Soltani R, Dinari M, Mohammadnezhad G (2018) Ultrasonic-assisted synthesis of novel nanocomposite of poly(vinyl alcohol) and amino-modified MCM-41: A green adsorbent for Cd(II) removal. Ultrason Sonochem 40:533–542. https://doi.org/10.1016/j.ultsonch.2017.07.045CrossRefPubMed

42.

Safadi B, Andrews R, Grulke EA (2002) Multiwalled carbon nanotube polymer composites: Synthesis and characterization of thin films. J Appl Polym Sci 84(14):2660–2669. https://doi.org/10.1002/app.10436CrossRef

43.

Sengwa RJ, Choudhary S (2014) Dielectric properties and fluctuating relaxation processes of poly(methyl methacrylate) based polymeric nanocomposite electrolytes. J Phys Chem Solids 75(6):765–774. https://doi.org/10.1016/j.jpcs.2014.02.008CrossRef

44.

Buruga K, Kalathi JT, Kim K-H, Ok YS, Danil B (2018) Polystyrene-halloysite nano tube membranes for water purification. J Ind Eng Chem 61:169–180. https://doi.org/10.1016/j.jiec.2017.12.014CrossRef

45.

Peng B et al (2011) Effects of ultrasound on the morphology and properties of propylene-based plastomer/nanosilica composites. Polym J 43(1):91–96. https://doi.org/10.1038/pj.2010.95CrossRef

46.

Chen Y, Li H (2007) Mechanism for effect of ultrasound on polymer melt in extrusion. J Polym Sci B Polym Phys 45(10):1226–1233. https://doi.org/10.1002/polb.21132CrossRef

47.

Isayev AI, Kumar R, Lewis TM (2009) Ultrasound assisted twin screw extrusion of polymer–nanocomposites containing carbon nanotubes. Polymer (Guildf) 50(1):250–260. https://doi.org/10.1016/j.polymer.2008.10.052CrossRef

48.

Mata-Padilla JM et al (2015) Structural and morphological studies on the deformation behavior of polypropylene/multi-walled carbon nanotubes nanocomposites prepared through ultrasound-assisted melt extrusion process. J Polym Sci B Polym Phys 53(7):475–491. https://doi.org/10.1002/polb.23655CrossRef

49.

Kim KY, Ju DU, Nam GJ, Lee JW (2007) Ultrasonic Effects on PP/PS/Clay Nanocomposites during Continuous Melt Compounding Process. Macromol Symp 249–250(1):283–288. https://doi.org/10.1002/masy.200750346CrossRef

50.

Andrade-Guel M et al (2021) Non-Woven Fabrics Based on Nanocomposite Nylon 6/ZnO Obtained by Ultrasound-Assisted Extrusion for Improved Antimicrobial and Adsorption Methylene Blue Dye Properties. Polymers (Basel) 13(11):1888. https://doi.org/10.3390/polym13111888CrossRefPubMed

51.

Swain SK, Isayev AI (2007) Effect of ultrasound on HDPE/clay nanocomposites: Rheology, structure and properties. Polymer (Guildf) 48(1):281–289. https://doi.org/10.1016/j.polymer.2006.11.002CrossRef

52.

Pérez-Medina J et al (2016) Metamaterial Behavior of Polymer Nanocomposites Based on Polypropylene/Multi-Walled Carbon Nanotubes Fabricated by Means of Ultrasound-Assisted Extrusion. Materials 9(11):923. https://doi.org/10.3390/ma9110923CrossRefPubMedPubMedCentral

53.

Wang J et al (2021) Preparation of flexible and elastic thermal conductive nanocomposites via ultrasonic-assisted forced infiltration. Compos Sci Technol 202. https://doi.org/10.1016/j.compscitech.2020.108582CrossRef

54.

Li C et al (2022) Ultrasonic-Assisted Method for the Preparation of Carbon Nanotube-Graphene/Polydimethylsiloxane Composites with Integrated Thermal Conductivity Electromagnetic Interference Shielding, and Mechanical Performances. Int J Mol Sci 23(23):15007. https://doi.org/10.3390/ijms232315007CrossRefPubMedPubMedCentral

55.

Zhao Y et al (2018) Ultrasonic processing of MWCNT nanopaper reinforced polymeric nanocomposites. Polymer (Guildf) 156:85–94. https://doi.org/10.1016/j.polymer.2018.09.053CrossRef

56.

Asif S, Chansoria P, Shirwaiker R (2020) Ultrasound-assisted vat photopolymerization 3D printing of preferentially organized carbon fiber reinforced polymer composites. J Manuf Process 56:1340–1343. https://doi.org/10.1016/j.jmapro.2020.04.029CrossRef

57.

Huang Y, Leu MC, Mazumder J, Donmez A (2015) Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations.J Manuf Sci Eng 137(1). https://doi.org/10.1115/1.4028725

58.

Chockalingam K, Jawahar N, Chandrasekhar U (2006) Influence of layer thickness on mechanical properties in stereolithography. Rapid Prototyp J 12(2):106–113. https://doi.org/10.1108/13552540610652456CrossRef

59.

Chockalingam K, Jawahar N, Ramanathan KN, Banerjee PS (2006) Optimization of stereolithography process parameters for part strength using design of experiments. Int J Adv Manuf Technol 29(1–2):79–88. https://doi.org/10.1007/s00170-004-2307-0CrossRef

60.

Xue J, Wu T, Dai Y, Xia Y (2019) Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications. Chem Rev 119(8):5298–5415. https://doi.org/10.1021/acs.chemrev.8b00593CrossRefPubMedPubMedCentral

61.

Mandzy N, Grulke E, Druffel T (2005) Breakage of TiO2 agglomerates in electrostatically stabilized aqueous dispersions. Powder Technol 160(2):121–126. https://doi.org/10.1016/j.powtec.2005.08.020CrossRef

62.

Wong CW et al (2020) Response Surface Methodology Optimization of Mono-dispersed MgO Nanoparticles Fabricated by Ultrasonic-Assisted Sol-Gel Method for Outstanding Antimicrobial and Antibiofilm Activities. J Clust Sci 31(2):367–389. https://doi.org/10.1007/s10876-019-01651-3CrossRef

63.

Srivatsan TS, Ibrahim IA, Mohamed FA, Lavernia EJ (1991) Processing techniques for particulate-reinforced metal aluminium matrix composites. J Mater Sci 26(22):5965–5978. https://doi.org/10.1007/BF01113872CrossRef

64.

Zhu L et al (2022) PVP/Highly Dispersed AgNPs Nanofibers Using Ultrasonic-Assisted Electrospinning. Polymers (Basel) 14(3):599. https://doi.org/10.3390/polym14030599CrossRefPubMed

65.

Dong Q et al (2013) Ultrasound-assisted preparation of electrospun carbon nanofiber/graphene composite electrode for supercapacitors. J Power Sources 243:350–353. https://doi.org/10.1016/j.jpowsour.2013.06.060CrossRef

66.

Hulsey S, Absar S, Choi H (2018) Investigation of simultaneous ultrasonic processing of polymer-nanoparticle solutions for electrospinning of nanocomposite nanofibers. J Manuf Process 34:776–784. https://doi.org/10.1016/j.jmapro.2018.03.050CrossRef

67.

Mulky E, Yazgan G, Maniura-Weber K, Luginbuehl R, Fortunato G, Bühlmann-Popa A-M (2014) Fabrication of biopolymer-based staple electrospun fibres for nanocomposite applications by particle-assisted low temperature ultrasonication. Mater Sci Eng C 45:277–286. https://doi.org/10.1016/j.msec.2014.09.009CrossRef

68.

Nonato RC, Mei LHI, Bonse BC, Chinaglia EF, Morales AR (2019) Nanocomposites of PLA containing ZnO nanofibers made by solvent cast 3D printing: Production and characterization. Eur Polym J 114:271–278. https://doi.org/10.1016/j.eurpolymj.2019.02.026CrossRef

69.

Kharissova OV, Torres-Martínez LM, Kharisov BI, editors (2021) Handbook of nanomaterials and nanocomposites for energy and environmental applications. Springer International Publishing. https://doi.org/10.1007/978-3-030-36268-3

70.

Lu KL, Lago RM, Chen YK, Green MLH, Harris PJF, Tsang SC (1996) Mechanical damage of carbon nanotubes by ultrasound. Carbon N Y 34(6):814–816. https://doi.org/10.1016/0008-6223(96)89470-XCrossRef

71.

Englert M, Bittmann B, Haupert F, Schlarb AK (2012) Scaling-up of the dispersion process of nanoparticle-agglomerates in epoxy resin with an innovative continuous ultrasonic flow-through-cell dispersion system. Polym Eng Sci 52(1):102–107. https://doi.org/10.1002/pen.22051CrossRef

72.

Hu C et al (2017) Comparative assessment of the strain-sensing behaviors of polylactic acid nanocomposites: reduced graphene oxide or carbon nanotubes. J Mater Chem C Mater 5(9):2318–2328. https://doi.org/10.1039/C6TC05261DCrossRef

73.

Postiglione G, Natale G, Griffini G, Levi M, Turri S (2015) Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling. Compos Part A Appl Sci Manuf 76:110–114. https://doi.org/10.1016/j.compositesa.2015.05.014CrossRef

74.

Zhou YX, Wu PX, Cheng Z-Y, Ingram J, Jeelani S (2008) Improvement in electrical, thermal and mechanical properties of epoxy by filling carbon nanotube. Express Polym Lett 2(1):40–48. https://doi.org/10.3144/expresspolymlett.2008.6CrossRef

75.

Rezazadeh V, Pourhossaini MR, Salimi A (2017) Effect of amine-functionalized dispersant on cure and electrical properties of carbon nanotube/epoxy nanocomposites. Prog Org Coat 111:389–394. https://doi.org/10.1016/j.porgcoat.2017.06.017CrossRef

76.

Yang Y, Gupta MC, Zalameda JN, Winfree WP (2008) Dispersion behaviour, thermal and electrical conductivities of carbon nanotube-polystyrene nanocomposites. Micro Nano Lett 3(2):35. https://doi.org/10.1049/mnl:20070073CrossRef

77.

Pradhan AK, Swain SK (2012) Oxygen Barrier of Multiwalled Carbon Nanotube/Polymethyl Methacrylate Nanocomposites Prepared by in situ Method. J Mater Sci Technol 28(5):391–395. https://doi.org/10.1016/S1005-0302(12)60073-5CrossRef

78.

Abbasian M, Khayyatalimohammadi M (2023) Ultrasound-assisted synthesis of MIL-88(Fe) conjugated starch-Fe3O4 nanocomposite: A safe antibacterial carrier for controlled release of tetracycline. Int J Biol Macromol 123665. https://doi.org/10.1016/j.ijbiomac.2023.123665

79.

Taka ZI, Mustafa MK, Sekak KA, Asman S (2019) Ultrasonic Assisted Preparation and Characterization of Conductive Polyaniline-Modified Magnetite Nanocomposites (PAni/Fe3O4 Nanocomposites)

80.

Sharif A, Mustaqeem M, Saleh TA, ur Rehman A, Ahmad M, Warsi MF (2022) Synthesis, structural and dielectric properties of Mg/Zn ferrites -PVA nanocomposites. Mater Sci Eng B280:115689. https://doi.org/10.1016/j.mseb.2022.115689.

81.

Ballarin B et al (2019) PANI/Au/Fe3O4 nanocomposite materials for high performance energy storage. Electrochim Acta 322. https://doi.org/10.1016/j.electacta.2019.134707CrossRef

82.

Rotaru R et al (2018) Ferromagnetic iron oxide–cellulose nanocomposites prepared by ultrasonication. Polym Chem 9(7):860–868. https://doi.org/10.1039/C7PY01587ACrossRef

83.

Saravanan A, Ramasamy RP (2016) Chitosan-maghemite-LiClO4 – a new green conducting superpara magnetic nanocomposite. J Polym Res 23(9):174. https://doi.org/10.1007/s10965-016-1072-8CrossRef

84.

Seo WJ et al (2006) Effects of ultrasound on the synthesis and properties of polyurethane foam/clay nanocomposites. J Appl Polym Sci 102(4):3764–3773. https://doi.org/10.1002/app.24735CrossRef

85.

Hyun YH, Lim ST, Choi HJ, Jhon MS (2001) Rheology of Poly(ethylene oxide)/Organoclay Nanocomposites. Macromolecules 34(23):8084–8093. https://doi.org/10.1021/ma002191wCrossRef

86.

Lim SK, Kim JW, Chin I-J, Choi HJ (2002) Rheological properties of a new rubbery nanocomposite: Polyepichlorohydrin/organoclay nanocomposites. J Appl Polym Sci 86(14):3735–3739. https://doi.org/10.1002/app.11451CrossRef

87.

Li J, Zhao L, Guo S (2005) Ultrasonic Preparation of Polymer/Layered Silicate Nanocomposites during Extrusion. Polym Bull 55(3):217–223. https://doi.org/10.1007/s00289-005-0424-zCrossRef

88.

Boro U, Kashyap N, Moholkar VS (2022) Sonochemical Synthesis of Poly(lactic acid) Nanocomposites with ZnO Nanoflowers: Effect of Nanofiller Morphology on Physical Properties. ACS Engineering Au 2(1):46–60. https://doi.org/10.1021/acsengineeringau.1c00018CrossRef

89.

Orasugh JT et al (2018) Jute cellulose nano-fibrils/hydroxypropylmethylcellulose nanocomposite: A novel material with potential for application in packaging and transdermal drug delivery system. Ind Crops Prod 112:633–643. https://doi.org/10.1016/j.indcrop.2017.12.069CrossRef

90.

Torgbo S, Sukyai P (2019) Fabrication of microporous bacterial cellulose embedded with magnetite and hydroxyapatite nanocomposite scaffold for bone tissue engineering. Mater Chem Phys 237. https://doi.org/10.1016/j.matchemphys.2019.121868CrossRef

91.

Abbasi AR, Morsali A (2010) Synthesis and Characterization of AgBr–Silk Nanocomposite Under Ultrasound Irradiation. J Inorg Organomet Polym Mater 20(4):825–832. https://doi.org/10.1007/s10904-010-9408-zCrossRef

92.

Sharififard H, Shahraki ZH, Rezvanpanah E, Rad SH (2018) A novel natural chitosan/activated carbon/iron bio-nanocomposite: Sonochemical synthesis, characterization, and application for cadmium removal in batch and continuous adsorption process. Bioresour Technol 270:562–569. https://doi.org/10.1016/j.biortech.2018.09.094CrossRefPubMed

Titel: Ultrasound assisted synthesis of polymer nanocomposites: a review
verfasst von: Vishnu Soman
Kavita Vishwakarma
Maneesh Kumar Poddar
Publikationsdatum: 01.11.2023
Verlag: Springer Netherlands
Erschienen in: Journal of Polymer Research / Ausgabe 11/2023
Print ISSN: 1022-9760
Elektronische ISSN: 1572-8935
DOI: https://doi.org/10.1007/s10965-023-03786-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2023

Ultrasound assistance synthesis of optimized ion imprinted polymer for efficient and selective removal of cobalt ions from waste streams

Efficiency assessment of the SEBS, SEP, and SBS copolymers in the compatibilization of the PS/ABS blend

APDS modified several bisphenol A polyimides with low dielectric constant under high frequency

Synthesis of star poly (L-lactic acid) and its copolymers catalyzed by lipase in supercritical carbon dioxide

Impact of polymer particle purification on the structural and catalytic properties of in situ generated gold nanoparticles

Fumarate metal organic frameworks as reactive and curing reaction alternant in hydrophobic bispropargyl ether based matrix resin system

Premium Partner

Marktübersichten