nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

22.02.2024 | ORIGINAL ARTICLE

Understanding the stress corrosion cracking resistance of laser shock surface patterned austenitic stainless-steel weld joints

verfasst von: Merbin John, Md Shariful Islam, Manoranjan Misra, Pradeep L. Menezes

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 7-8/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Stress corrosion cracking (SCC) failures of austenitic stainless steel (ASS)-based dry storage canister (DSC) weld joints are a potential safety hazard in nuclear applications. The present study aims to provide deeper insights into the effect of novel laser shock surface patterning (LSSP) on the SCC resistance of DSC weld joints. The LSSP experiments were performed with varying intensity, covering the fusion zone (FZ), heat-affected zone (HAZ), and base material (BM). The SCC testing was conducted in boiling MgCl₂ on U-bend specimens. The laser-induced shock wave developed during LSSP simultaneously caused strengthening and patterning effects by forming an array of micro-indentations. LSSP leads to austenitic to strain-induced martensitic (α′-phase) transformation, residual compressive stress (RCS), and grain refinement. In addition, surface hardness was improved, and surface roughness and volume fraction of α′-phase reduced significantly. The SCC testing on LSSP’ed U-bend specimens revealed enhanced SCC resistance compared to the unpeened U bends, which can be attributed to the presence of RCS in the subsurface and the minimal effect of surface roughness and volume fraction of α′-phase.

Vorheriger Artikel A disturbance evaluation method for scheduling mechanisms in digital twin-based workshops

Nächster Artikel Numerical analysis EF of resilience impact test behavior for X80 steel

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

NRC Information Notice 2012–20: Potential chloride-induced stress corrosion cracking of austenitic stainless steel and maintenance of dry cask storage system canisters. https://www.nrc.gov/docs/ML1231/ML12319A440.pdf

Chen K, Wang J, Du D et al (2018) Stress corrosion crack growth behavior of type 310S stainless steel in supercritical water. Corrosion 74:776–787. https://doi.org/10.5006/2775CrossRef

Lu Z, Shoji T, Meng F et al (2011) Characterization of microstructure and local deformation in 316NG weld heat-affected zone and stress corrosion cracking in high temperature water. Corros Sci 53:1916–1932. https://doi.org/10.1016/j.corsci.2011.02.009CrossRef

Tani J, Mayuzumi M, Hara N (2008) Stress corrosion cracking of stainless-steel canister for concrete cask storage of spent fuel. J Nucl Mater 379:42–47. https://doi.org/10.1016/j.jnucmat.2008.06.005CrossRef

Mochizuki M (2007) Control of welding residual stress for ensuring integrity against fatigue and stress–corrosion cracking. Nucl Eng Des 237:107–123. https://doi.org/10.1016/j.nucengdes.2006.05.006CrossRef

John M, Ralls AM, Dooley SC et al (2021) Ultrasonic surface rolling process: properties, characterization, and applications. Appl Sci 11:10986. https://doi.org/10.3390/app112210986CrossRef

Kishore A, John M, Ralls AM et al (2022) Ultrasonic nanocrystal surface modification: processes, characterization, properties, and applications. Nanomaterials 12:1415. https://doi.org/10.3390/nano12091415CrossRef

John M, Kalvala PR, Misra M, Menezes PL (2021) Peening techniques for surface modification: processes, properties, and applications. Materials 14:3841. https://doi.org/10.3390/ma14143841CrossRef

John M, Ralls AM, Misra M, Menezes PL (2023) Effect of ultrasonic impact peening on stress corrosion cracking resistance of austenitic stainless-steel welds for nuclear canister applications. J Nucl Mater 584:154590. https://doi.org/10.1016/j.jnucmat.2023.154590CrossRef

10.

Lu Z, Xu F, Tang C et al (2021) Stress corrosion cracking susceptibility of 304 stainless steel subjected to laser shock peening without coating. J Mater Eng Perform 30:7163–7170. https://doi.org/10.1007/s11665-021-05898-8CrossRef

11.

John M, Ralls AM, Kuruveri UB, Menezes PL (2023) Tribological, corrosion, and microstructural features of laser-shock-peened steels. Metals 13:397. https://doi.org/10.3390/met13020397CrossRef

12.

Peyre P, Fabbro R (1995) Laser shock processing: a review of the physics and applications. Opt Quantum Electron 27:1213–1229. https://doi.org/10.1007/BF00326477CrossRef

13.

Yakimets I, Richard C, Béranger G, Peyre P (2004) Laser peening processing effect on mechanical and tribological properties of rolling steel 100Cr6. Wear 256:311–320. https://doi.org/10.1016/S0043-1648(03)00405-8CrossRef

14.

Zhang R, Hou X, Zhou X et al (2016) Effects of laser shock peening on the wear and degradation behaviors of magnesium alloys. Am Soc Mech Eng Digit Collect. https://doi.org/10.1115/MSEC2016-8689CrossRef

15.

Peyre P, Fabbro R, Merrien P, Lieurade HP (1996) Laser shock processing of aluminium alloys. Application to high cycle fatigue behaviour. Mater Sci Eng A 210:102–113. https://doi.org/10.1016/0921-5093(95)10084-9CrossRef

16.

Lu JZ, Luo KY, Yang DK et al (2012) Effects of laser peening on stress corrosion cracking (SCC) of ANSI 304 austenitic stainless steel. Corros Sci 60:145–152. https://doi.org/10.1016/j.corsci.2012.03.044CrossRef

17.

Kalainathan S, Sathyajith S, Swaroop S (2012) Effect of laser shot peening without coating on the surface properties and corrosion behavior of 316L steel. Opt Lasers Eng 50:1740–1745. https://doi.org/10.1016/j.optlaseng.2012.07.007CrossRef

18.

Yoo Y-R, Choi S-H, Kim Y-S (2023) Effect of laser shock peening on the stress corrosion cracking of 304L stainless steel. Metals 13:516. https://doi.org/10.3390/met13030516CrossRef

19.

Zhiming L, Laimin S, Shenjin Z et al (2015) Effect of high energy shot peening pressure on the stress corrosion cracking of the weld joint of 304 austenitic stainless steel. Mater Sci Eng A 637:170–174. https://doi.org/10.1016/j.msea.2015.03.088CrossRef

20.

Prabhakaran S, Kulkarni A, Vasanth G et al (2018) Laser shock peening without coating induced residual stress distribution, wettability characteristics and enhanced pitting corrosion resistance of austenitic stainless steel. Appl Surf Sci 428:17–30. https://doi.org/10.1016/j.apsusc.2017.09.138CrossRef

21.

Li K, Yao Z, Hu Y, Gu W (2014) Friction and wear performance of laser peen textured surface under starved lubrication. Tribol Int 77:97–105. https://doi.org/10.1016/j.triboint.2014.04.017CrossRef

22.

Trdan U, Porro JA, Ocaña JL, Grum J (2012) Laser shock peening without absorbent coating (LSPwC) effect on 3D surface topography and mechanical properties of 6082–T651 Al alloy. Surf Coat Technol 208:109–116. https://doi.org/10.1016/j.surfcoat.2012.08.048CrossRef

23.

Lee H, Kim D, Jung J et al (2009) Influence of peening on the corrosion properties of AISI 304 stainless steel. Corros Sci 51:2826–2830. https://doi.org/10.1016/j.corsci.2009.08.008CrossRef

24.

Ghosh S, Kain V (2010) Microstructural changes in AISI 304L stainless steel due to surface machining: effect on its susceptibility to chloride stress corrosion cracking. J Nucl Mater 403:62–67. https://doi.org/10.1016/j.jnucmat.2010.05.028CrossRef

25.

Starman B, Hallberg H, Wallin M et al (2020) Modelling of the mechanical response in 304 austenitic steel during laser shock peening and conventional shot peening. Procedia Manuf 47:450–457. https://doi.org/10.1016/j.promfg.2020.04.334CrossRef

26.

Karthik D, Swaroop S (2016) Influence of laser peening on phase transformation and corrosion resistance of AISI 321 steel. J Mater Eng Perform 25:2642–2650. https://doi.org/10.1007/s11665-016-2158-5CrossRef

27.

Lu Z, Lin S, Liang H et al (2023) Effects of thermal laser shock peening on stress corrosion susceptibility of 304 stainless steel. J Mater Eng Perform. https://doi.org/10.1007/s11665-023-08878-2CrossRef

28.

Mordyuk BN, Milman YuV, Iefimov MO et al (2008) Characterization of ultrasonically peened and laser-shock peened surface layers of AISI 321 stainless steel. Surf Coat Technol 202:4875–4883. https://doi.org/10.1016/j.surfcoat.2008.04.080CrossRef

29.

Ye C, Suslov S, Kim BJ et al (2011) Fatigue performance improvement in AISI 4140 steel by dynamic strain aging and dynamic precipitation during warm laser shock peening. Acta Mater 59:1014–1025. https://doi.org/10.1016/j.actamat.2010.10.032CrossRef

30.

Mao B, Siddaiah A, Menezes PL, Liao Y (2018) Surface texturing by indirect laser shock surface patterning for manipulated friction coefficient. J Mater Process Technol 257:227–233. https://doi.org/10.1016/j.jmatprotec.2018.02.041CrossRef

31.

Toloei AS, Stoilov V, Northwood DO (2013) A new approach to combating corrosion of metallic materials. Appl Surf Sci 284:242–247. https://doi.org/10.1016/j.apsusc.2013.07.088CrossRef

32.

Wang Y, Wang W, Zhong L et al (2010) Super-hydrophobic surface on pure magnesium substrate by wet chemical method. Appl Surf Sci 256:3837–3840. https://doi.org/10.1016/j.apsusc.2010.01.037CrossRef

33.

De Lara LR, Jagdheesh R, Ocaña JL (2016) Corrosion resistance of laser patterned ultrahydrophobic aluminium surface. Mater Lett 184:100–103. https://doi.org/10.1016/j.matlet.2016.08.022CrossRef

34.

Kumari R, Pfleging W, Besser H, Majumdar JD (2019) Microstructure and corrosion behavior of laser induced periodic patterned titanium based alloy. Opt Laser Technol 116:196–213. https://doi.org/10.1016/j.optlastec.2019.03.017CrossRef

35.

Rosenkranz A, Reinert L, Gachot C et al (2015) Oxide formation, morphology, and nanohardness of laser-patterned steel surfaces. Adv Eng Mater 17:1234–1242. https://doi.org/10.1002/adem.201400487CrossRef

36.

Saqib M, Beshchasna N, Pelaccia R et al (2022) Tailoring surface properties, biocompatibility and corrosion behavior of stainless steel by laser induced periodic surface treatment towards developing biomimetic stents. Surf Interfaces 34:102365. https://doi.org/10.1016/j.surfin.2022.102365CrossRef

37.

G01 Committee practice for making and using u-bend stress-corrosion test specimens. ASTM International. https://doi.org/10.1520/G0030-97R16

38.

Won SJ, Kim HS (2019) Effects of laser parameters on morphological change and surface properties of aluminum alloy in masked laser surface texturing. J Manuf Process 48:260–269. https://doi.org/10.1016/j.jmapro.2019.10.034CrossRef

39.

Folkhard E (2013) Welding metallurgy of stainless steels. Springer. https://doi.org/10.1007/978-3-7091-8965-8

40.

Huang CX, Yang G, Gao YL et al (2007) Investigation on the nucleation mechanism of deformation-induced martensite in an austenitic stainless steel under severe plastic deformation. J Mater Res 22:724–729. https://doi.org/10.1557/jmr.2007.0094CrossRef

41.

Luo KY, Lu JZ, Zhang YK et al (2011) Effects of laser shock processing on mechanical properties and micro-structure of ANSI 304 austenitic stainless steel. Mater Sci Eng A 528:4783–4788. https://doi.org/10.1016/j.msea.2011.03.041CrossRef

42.

Nikitin I, Scholtes B, Maier HJ, Altenberger I (2004) High temperature fatigue behavior and residual stress stability of laser-shock peened and deep rolled austenitic steel AISI 304. Scr Mater 50:1345–1350. https://doi.org/10.1016/j.scriptamat.2004.02.012CrossRef

43.

Liu H, Wei Y, Tan CKI et al (2020) XRD and EBSD studies of severe shot peening induced martensite transformation and grain refinements in austenitic stainless steel. Mater Charact 168:110574. https://doi.org/10.1016/j.matchar.2020.110574CrossRef

44.

Brewer LN, Schiel JF, Menon ESK, Woo DJ (2018) The connections between powder variability and coating microstructures for cold spray deposition of austenitic stainless steel. Surf Coat Technol 334:50–60. https://doi.org/10.1016/j.surfcoat.2017.10.082CrossRef

45.

Talonen J, Hänninen H, Nenonen P, Pape G (2005) Effect of strain rate on the strain-induced γ → α′-martensite transformation and mechanical properties of austenitic stainless steels. Metall Mater Trans A 36:421–432. https://doi.org/10.1007/s11661-005-0313-yCrossRef

46.

Nikitin I, Scholtes B (2012) Deep rolling of austenitic steel AISI 304 at different temperatures – near surface microstructures and fatigue. HTM J Heat Treat Mater 67:188–194. https://doi.org/10.3139/105.110152CrossRef

47.

Lu JZ, Luo KY, Zhang YK et al (2010) Grain refinement mechanism of multiple laser shock processing impacts on ANSI 304 stainless steel. Acta Mater 58:5354–5362. https://doi.org/10.1016/j.actamat.2010.06.010CrossRef

48.

Lim H, Kim P, Jeong H, Jeong S (2012) Enhancement of abrasion and corrosion resistance of duplex stainless steel by laser shock peening. J Mater Process Technol 212:1347–1354. https://doi.org/10.1016/j.jmatprotec.2012.01.023CrossRef

49.

Zhang X, Hansen N, Gao Y, Huang X (2012) Hall-Petch and dislocation strengthening in graded nanostructured steel. Acta Mater 60:5933–5943. https://doi.org/10.1016/j.actamat.2012.07.037CrossRef

50.

Fargas G, Roa JJ, Mateo A (2015) Effect of shot peening on metastable austenitic stainless steels. Mater Sci Eng A 641:290–296. https://doi.org/10.1016/j.msea.2015.05.079CrossRef

51.

Zhang Y, You J, Lu J et al (2010) Effects of laser shock processing on stress corrosion cracking susceptibility of AZ31B magnesium alloy. Surf Coat Technol 204:3947–3953. https://doi.org/10.1016/j.surfcoat.2010.03.015CrossRef

52.

Wan Z, Dai W, Guo W et al (2022) Improved corrosion resistance of Ni-base Alloy 600 welded joint by laser shock peening. J Manuf Process 80:718–728. https://doi.org/10.1016/j.jmapro.2022.05.061CrossRef

53.

Nataraj MV, Swaroop S (2022) Effect of laser peening without coating on mechanical and microstructural behaviour of SS 304 stainless steel. Mater Today Commun 33:104200. https://doi.org/10.1016/j.mtcomm.2022.104200CrossRef

54.

Praveenkumar K, Swaroop S, Manivasagam G (2022) Residual stress distribution, phase transformation, and wettability characteristics of laser peened austenitic stainless steel. J Mater Eng Perform 31:6846–6857. https://doi.org/10.1007/s11665-022-06748-xCrossRef

55.

John M, Ralls AM, Misra M, Menezes PL (2024) Understanding the mechanism of stress corrosion cracking resistance in stainless steel welds subjected to laser shock peening without coating for nuclear canister applications. J Mater Eng Perform. https://doi.org/10.1007/s11665-023-09098-4CrossRef

56.

Karthik D, Kalainathan S, Swaroop S (2015) Surface modification of 17–4 PH stainless steel by laser peening without protective coating process. Surf Coat Technol 278:138–145. https://doi.org/10.1016/j.surfcoat.2015.08.012CrossRef

57.

Suh J-H, Shin J-K, Kang S-JL et al (1998) Investigation of IGSCC behavior of sensitized and laser-surface-melted Alloy 600. Mater Sci Eng A 254:67–75. https://doi.org/10.1016/S0921-5093(98)00704-7CrossRef

58.

Masse J-E, Barreau G (1995) Laser generation of stress waves in metal. Surf Coat Technol 70:231–234CrossRef

59.

Frankel J, Abbate A, Scholz W (1993) The effect of residual stresses on hardness measurements. Exp Mech 33:164–168. https://doi.org/10.1007/BF02322494CrossRef

60.

Yazdanpanah A, Lago M, Gennari C, Dabalà M (2021) Stress corrosion cracking probability of selective laser melted 316L austenitic stainless steel under the effect of grinding induced residual stresses. Metals 11:327. https://doi.org/10.3390/met11020327CrossRef

61.

Klapper HS, Goellner J, Burkert A, Heyn A (2013) Environmental factors affecting pitting corrosion of type 304 stainless steel investigated by electrochemical noise measurements under potentiostatic control. Corros Sci 75:239–247. https://doi.org/10.1016/j.corsci.2013.06.005CrossRef

62.

Porter N, Brooks D, Bryan C et al (2021) FY21 Status report: probabilistic SCC model for SNF dry storage canisters. https://doi.org/10.2172/1822281

63.

Turnbull A, Mingard K, Lord JD et al (2011) Sensitivity of stress corrosion cracking of stainless steel to surface machining and grinding procedure. Corros Sci 53:3398–3415. https://doi.org/10.1016/j.corsci.2011.06.020CrossRef

64.

Gill AS, Telang A, Vasudevan VK (2015) Characteristics of surface layers formed on inconel 718 by laser shock peening with and without a protective coating. J Mater Process Technol 225:463–472. https://doi.org/10.1016/j.jmatprotec.2015.06.026CrossRef

65.

Lv Y, Luo H, Tang J et al (2018) Corrosion properties of phase reversion induced nano/ultrafine grained AISI 304 metastable austenite stainless steel. Mater Res Bull 107:421–429. https://doi.org/10.1016/j.materresbull.2018.04.024CrossRef

66.

Murakami D, Jinnai H, Takahara A (2014) Wetting transition from the Cassie-Baxter state to the Wenzel state on textured polymer surfaces. Langmuir 30:2061–2067. https://doi.org/10.1021/la4049067CrossRef

Titel: Understanding the stress corrosion cracking resistance of laser shock surface patterned austenitic stainless-steel weld joints
verfasst von: Merbin John
Md Shariful Islam
Manoranjan Misra
Pradeep L. Menezes
Publikationsdatum: 22.02.2024
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 7-8/2024
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-024-13242-2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7-8/2024

Thanking reviewers

Construction of a predictive model for residual stresses in micro-milling of 7075 aluminum alloy

Correction to: Closed-loop quality control system for laser chemical machining in metal micro-production

Cold formability of friction stir processed 5754-H111 and 6082-T6 aluminum alloys: an experimental and numerical study

A review on machining Ti–5Al–5V–5Mo–3Cr alloy using defined geometry tools

Research status of influence mechanism of surface integrity on fatigue behavior of metal workpieces: a review

Premium Partner

Marktübersichten