nach oben

Journal of Materials Engineering and Performance

Erschienen in:

06.07.2021

Vat-Photopolymerization-Based Ceramic Manufacturing

verfasst von: Xiangjia Li, Yong Chen

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 7/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This article presents a detailed account of the processes involved in vat-photopolymerization-based fabrication of ceramics, namely bioceramics, structural ceramics, piezoelectric ceramics, optical ceramics, and polymer-derived ceramics. Information and methods of material preparation, curing characteristics, green-part fabrication, property identification, process design and planning, and quality control and optimization are introduced. The article also provides information on postprocessing techniques, namely debinding and sintering, as well as on the phenomenon of shrinkage and compensation.

Vorheriger Artikel Defects in Metal Additive Manufacturing Processes

Nächster Artikel Experimental Analysis of Impact Resistance of 3D Polycarbonate and Nylon + Carbon Fiber Specimens

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

B. Murat, Engineering Ceramics, Springer Science and Business Media, Berlin, 2013, p 406–444

Z. Chen, Z. Li, J. Li, C. Liu, C. Lao, Y. Fu, C. Liu, Y. Li, P. Wang, and Y. He, 3D Printing of Ceramics: A Review, J. Eur. Ceram. Soc., 2019, 39, p 661–687. https://doi.org/10.1016/j.jeurceramsoc.2018.11.013CrossRef

V. Tomeckova and J.W. Halloran, Predictive Models for the Photopolymerization of Ceramic Suspensions, J. Eur. Ceram. Soc., 2010, 30(14), p 2833–2840. https://doi.org/10.1016/j.jeurceramsoc.2010.01.027CrossRef

J. Edgar and S. Tint, Additive Manufacturing Technologies: 3D Printing Rapid Prototyping, and Direct Digital Manufacturing, Johnson Matthey Tech., 2015, 59(3), p 193–198. https://doi.org/10.1595/205651315X688406CrossRef

K.V. Wong and A. Hernandez, A Review of Additive Manufacturing, Int. Scholar. Res. Not. Mech. Eng., 2012 https://doi.org/10.5402/2012/208760CrossRef

T.D. Ngo, A. Kashani, G. Imbalzano, K.T. Nguyen, and D. Hui, Additive Manufacturing (3D Printing): A Review of Materials, Methods, Applications and Challenges, Compos. B Eng., 2018, 143, p 172–196. https://doi.org/10.1016/j.compositesb.2018.02.012CrossRef

B. Derby, Inkjet Printing Ceramics: From Drops to Solid, J. Eur. Ceram. Soc., 2011, 31(14), p 2543–2550. https://doi.org/10.1016/j.jeurceramsoc.2011.01.016CrossRef

J.A. Gonzalez, J. Mireles, Y. Lin, and R.B. Wicker, Characterization of Ceramic Components Fabricated Using Binder Jetting Additive Manufacturing Technology, Ceram. Int., 2016, 42(9), p 10559–10564. https://doi.org/10.1016/j.ceramint.2016.03.079CrossRef

J.P. Kruth, P. Mercelis, J. Van Vaerenbergh, L. Froyen, and M. Rombouts, Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting, Rapid Prototyp. J., 2005, 11(1), p 26–36. https://doi.org/10.1108/13552540510573365CrossRef

10.

P.F.D.M. Dudek, FDM 3D Printing Technology in Manufacturing Composite Elements, Arch. Metall. Mater., 2013, 58(4), p 1415–1418. https://doi.org/10.2478/amm-2013-0186CrossRef

11.

G. Rundle, A Revolution in the Making, Simon and Schuster, New York, 2014

12.

M. Allahverdi, S.C. Danforth, M. Jafari, and A. Safari, Processing of Advanced Electroceramic Components by Fused Deposition Technique, J. Eur. Ceram. Soc., 2001, 21(10–11), p 1485–1490. https://doi.org/10.1016/S0955-2219(01)00047-4CrossRef

13.

H. Yang, S. Yang, X. Chi, and J.R. Evans, Fine Ceramic Lattices Prepared by Extrusion Freeforming, J. Biomed. Mater. Res. B, 2006, 79(1), p 116–121. https://doi.org/10.1002/jbm.b.30520CrossRef

14.

D.W. Hutmacher, T. Schantz, I. Zein, K.W. Ng, S.H. Teoh, and K.C. Tan, Mechanical Properties and Cell Cultural Response of Polycaprolactone Scaffolds Designed and Fabricated via Fused Deposition Modeling, Biomed. Mater. Res., 2001, 55(2), p 203–216. https://doi.org/10.1002/1097-4636(200105)55:2%3c203::AID-JBM1007%3e3.0.CO;2-7CrossRef

15.

T. Cao, K.H. Ho, and S.H. Teoh, Scaffold Design and In Vitro Study of Osteochondral Coculture in a Three-Dimensional Porous Polycaprolactone Scaffold Fabricated by Fused Deposition Modeling, Tissue Eng., 2003, 9((4, Supplement 1)), p 103–112. https://doi.org/10.1089/10763270360697012CrossRef

16.

M.W. Sa, B.N.B. Nguyen, R.A. Moriarty, T. Kamalitdinov, J.P. Fisher, and J.Y. Kim, Fabrication and Evaluation of 3D Printed BCP Scaffolds Reinforced with ZrO₂ for Bone Tissue Applications, Biotechnol. Bioeng., 2018, 115(4), p 989–999. https://doi.org/10.1002/bit.26514CrossRef

17.

J.A. Lewis and G.M. Gratson, Direct Writing in Three Dimensions, Mater. Today, 2004, 7(7–8), p 32–39. https://doi.org/10.1016/S1369-7021(04)00344-XCrossRef

18.

E. Feilden, E.G.T. Blanca, F. Giuliani, E. Saiz, and L. Vandeperre, Robocasting of Structural Ceramic Parts with Hydrogel Inks, J. Eur. Ceram. Soc., 2016, 36(10), p 2525–2533. https://doi.org/10.1016/j.jeurceramsoc.2016.03.001CrossRef

19.

S. Michna, W. Wu, and J.A. Lewis, Concentrated Hydroxyapatite Inks for Direct-Write Assembly of 3D Periodic Scaffolds, Biomaterials, 2005, 26(28), p 5632–5639. https://doi.org/10.1016/j.biomaterials.2005.02.040CrossRef

20.

Y. Yang, X. Song, X. Li, Z. Chen, C. Zhou, Q. Zhou, and Y. Chen, Recent Progress in Biomimetic Additive Manufacturing Technology: From Materials to Functional Structures, Adv. Mater., 2018, 30(36), p 1706539. https://doi.org/10.1002/adma.201706539CrossRef

21.

Y.S. Leung, T.H. Kwok, X. Li, Y. Yang, C.C. Wang, and Y. Chen, Challenges and Status on Design and Computation for Emerging Additive Manufacturing Technologies, J. Comput. Inf. Sci. Eng., 2019 https://doi.org/10.1115/1.4041913CrossRef

22.

B. Mueller, Additive Manufacturing Technologies—Rapid Prototyping to Direct Digital Manufacturing, Assem. Autom., 2012 https://doi.org/10.1108/aa.2012.03332baa.010CrossRef

23.

P.F. Jacobs, Stereolithography and Other RPM Technologies: From Rapid Prototyping to Rapid Tooling, Society of Manufacturing Engineers, 1995, p 59–79

24.

Y. Yang, X. Li, X. Zheng, Z. Chen, Q. Zhou, and Y. Chen, 3D-Printed Biomimetic Super-Hydrophobic Structure for Microdroplet Manipulation and Oil/Water Separation, Adv. Mater., 2018, 30(9), p 1704912. https://doi.org/10.1002/adma.201704912CrossRef

25.

X. Li and Y. Chen, Micro-Scale Feature Fabrication Using Immersed Surface Accumulation, J. Manuf. Process., 2017, 28, p 531–540. https://doi.org/10.1016/j.jmapro.2017.04.022CrossRef

26.

H. Mao, Y.S. Leung, Y. Li, P. Hu, W. Wu, and Y. Chen, Multiscale Stereolithography Using Shaped Beams, J. Micro Nano-Manuf., 2017 https://doi.org/10.1115/1.4037832CrossRef

27.

Y. Pan, C. Zhou, and Y. Chen, A Fast Mask Projection Stereolithography Process for Fabricating Digital Models in Minutes, ASME J. Manuf. Sci. Eng., 2012 https://doi.org/10.1115/1.4007465CrossRef

28.

C. Zhou, Y. Chen, Z. Yang, and B. Khoshnevis, Digital Material Fabrication Using Mask-Image-Projection-Based Stereolithography, Rapid Prototyp. J., 2013, 19(3), p 153–165. https://doi.org/10.1108/13552541311312148CrossRef

29.

C. Zhou and Y. Chen, Additive Manufacturing Based on Optimized Mask Video Projection for Improved Accuracy and Resolution, J. Manuf. Process., 2012, 14(2), p 107–118. https://doi.org/10.1016/j.jmapro.2011.10.002CrossRef

30.

X. Li, H. Mao, Y. Pan, and Y. Chen, Mask Video Projection-Based Stereolithography with Continuous Resin Flow, ASME J. Manuf. Sci. Eng., 2019 https://doi.org/10.1115/1.4043765CrossRef

31.

J.R. Tumbleston, D. Shirvanyants, N. Ermoshkin, R. Janusziewicz, A.R. Johnson, D. Kelly, K. Chen, R. Pinschmidt, J.P. Rolland, A. Ermoshkin, and E.T. Samulski, Continuous Liquid Interface Production of 3D Objects, Science, 2015, 347(6228), p 1349–1352. https://doi.org/10.1126/science.aaa2397CrossRef

32.

Y. Yang, X. Li, M. Chu, H. Sun, J. Jin, K. Yu, Q. Wang, Q. Zhou, and Y. Chen, Electrically Assisted 3D Printing of Nacre-Inspired Structures with Self-Sensing Capability, Sci. Adv., 2019, 5(4), p eaau9490. https://doi.org/10.1126/sciadv.aau9490CrossRef

33.

X. Li, B. Xie, J. Jin, Y. Chai, and Y. Chen, 3D Printing Temporary Crown and Bridge by Temperature Controlled Mask Image Projection Stereolithography, Proc. Manuf., 2018, 26, p 1023–1033. https://doi.org/10.1016/j.promfg.2018.07.134CrossRef

34.

A. Ovsianikov, B. Chichkov, P. Mente, N.A. Monteiro-Riviere, A. Doraiswamy, and R.J. Narayan, Two Photon Polymerization of Polymer-Ceramic Hybrid Materials for Transdermal Drug Delivery, Int. J. Appl. Ceram. Technol., 2007, 4(1), p 22–29. https://doi.org/10.1111/j.1744-7402.2007.02115.xCrossRef

35.

X. Li, T. Baldacchin, X. Song, and Y. Chen, Multi-Scale Additive Manufacturing: An Investigation on Building Objects with Macro-, Micro- and Nano-Scales Features, in 11th International Conference on Micro Manufacturing, March 2016 (Irvine, CA), p 29–31

36.

J. Zhang, Y. Yang, B. Zhu, X. Li, J. Jin, Z. Chen, Y. Chen, and Q. Zhou, Multifocal Point Beam Forming by a Single Ultrasonic Transducer with 3D Printed Holograms, Appl. Phys. Lett., 2018, 113(24), p 243502. https://doi.org/10.1063/1.5058079CrossRef

37.

P.J. Bartolo and J. Gaspar, Metal Filled Resin for Stereolithography Metal Part, CIRP Ann., 2008, 57(1), p 235–238. https://doi.org/10.1016/j.cirp.2008.03.124CrossRef

38.

X. Li, Y. Yang, B. Xie, M. Chu, H. Sun, S. Hao, Y. Chen, and Y. Chen, 3D Printing of Flexible Liquid Sensor Based on Swelling Behavior of Hydrogel with Carbon Nanotubes, Adv. Mater. Technol., 2019, 4(2), p 1800476. https://doi.org/10.1002/admt.201800476CrossRef

39.

X. Zheng, H. Lee, T.H. Weisgraber, M. Shusteff, J. DeOtte, E.B. Duoss, J.D. Kuntz, M.M. Biener, Q. Ge, J.A. Jackson, and S.O. Kucheyev, Ultralight, Ultrastiff Mechanical Metamaterials, Science, 2014, 344(6190), p 1373–1377. https://doi.org/10.1126/science.1252291CrossRef

40.

S. Tarafder, V.K. Balla, N.M. Davies, A. Bandyopadhyay, and S. Bose, Microwave-Sintered 3D Printed Tricalcium Phosphate Scaffolds for Bone Tissue Engineering, J. Tissue Eng. Regen. Med., 2013, 7(8), p 631–641. https://doi.org/10.1002/term.555CrossRef

41.

F. Kotz, K. Arnold, W. Bauer, D. Schild, N. Keller, K. Sachsenheimer, T.M. Nargang, C. Richter, D. Helmer, and B.E. Rapp, Three-Dimensional Printing of Transparent Fused Silica Glass, Nature, 2017, 544(7650), p 337. https://doi.org/10.1038/nature22061CrossRef

42.

Y. Pan, X. Zhao, C. Zhou, and Y. Chen, Smooth Surface Fabrication in Mask Projection Based Stereolithography, J. Manuf. Process., 2012, 14(4), p 460–470. https://doi.org/10.1016/j.jmapro.2012.09.003CrossRef

43.

M. Vaezi, H. Seitz, and S. Yang, A Review on 3D Micro-Additive Manufacturing Technologies, Int. J. Adv. Manuf. Technol., 2013, 67(5–8), p 1721–1754. https://doi.org/10.1007/s00170-012-4605-2CrossRef

44.

F.P. Melchels, J. Feijen, and D.W. Grijpma, A Review on Stereolithography and Its Applications in Biomedical Engineering, Biomaterials, 2010, 31(24), p 6121–6130. https://doi.org/10.1016/j.biomaterials.2010.04.050CrossRef

45.

K.C. Wu, Parametric Study and Optimization of Ceramic Stereolithography, University of Michigan, Ann Arbor, 2005

46.

G.A. Brady and J.W. Halloran, Stereolithography of Ceramic Suspensions, Rapid Prototyp. J., 1997, 3(2), p 61–65. https://doi.org/10.1108/13552549710176680CrossRef

47.

X. Zhang, X.N. Jiang, and C. Sun, Micro-Stereolithography of Polymeric and Ceramic Microstructures, Sens. Actuators A Phys., 1999, 77(2), p 149–156. https://doi.org/10.1016/S0924-4247(99)00189-2CrossRef

48.

X. Song, Y. Chen, T.W. Lee, S. Wu, and L. Cheng, Ceramic Fabrication Using Mask-Image-Projection-Based Stereolithography Integrated with Tape-Casting, J. Manuf. Process., 2015, 20, p 456–464. https://doi.org/10.1016/j.jmapro.2015.06.022CrossRef

49.

I. Gibson, D. Rosen, and B. Stucker, Vat Photopolymerization Processes, Addit. Manuf. Technol., 2015 https://doi.org/10.1007/978-1-4939-2113-3_4CrossRef

50.

Y.T. Chou, Y.T. Ko, and M.F. Yan, Fluid Flow Model for Ceramic Tape Casting, J. Am. Ceram. Soc., 1987, 70(10), p C–280. https://doi.org/10.1111/j.1151-2916.1987.tb04900.xCrossRef

51.

J. Huang, T.H. Kwok, C. Zhou, and W. Xu, Surfel Convolutional Neural Network for Support Detection in Additive Manufacturing, Int. J. Adv. Manuf. Technol., 2019, 102, p 1–12.

52.

J. Jin and Y. Chen, Highly Removable Water Support for Stereolithography, J. Manuf. Process., 2017, 28, p 541–549. https://doi.org/10.1016/j.jmapro.2017.04.023CrossRef

53.

L. He and X. Song, Supportability of a High-Yield-Stress Slurry in a New Stereolithography-Based Ceramic Fabrication Process, JOM, 2018, 70(3), p 407–412. https://doi.org/10.1007/s11837-017-2657-3CrossRef

54.

L. He, F. Fei, W. Wang, and X. Song, Support-Free Ceramic Stereolithography of Complex Overhanging Structures Based on an Elasto-Viscoplastic Suspension Feedstock, ACS Appl. Mater. Interfaces, 2019, 11, p 18849–18857. https://doi.org/10.1021/acsami.9b04205CrossRef

55.

L. Xu, Q. Huang, A. Sabbaghi, and T. Dasgupta, Shape Deviation Modeling for Dimensional Quality Control in Additive Manufacturing, ASME 2013 International Mechanical Engineering Congress and Exposition, Vol 2A, American Society of Mechanical Engineers, Nov 2013, p V02AT02A018

56.

J.G. Zhou, D. Herscovici, and C.C. Chen, Parametric Process Optimization to Improve the Accuracy of Rapid Prototyped Stereolithography Parts, Int. J. Mach. Tools Manuf., 2000, 40(3), p 363–379. https://doi.org/10.1016/S0890-6955(99)00068-1CrossRef

57.

K. Xu and Y. Chen, Photocuring Temperature Study for Curl Distortion Control in Projection- Based Stereolithography, J. Manuf. Sci. Eng., 2017 https://doi.org/10.1115/1.4034305CrossRef

58.

H. Wu, Y. Cheng, W. Liu, R. He, M. Zhou, S. Wu, X. Song, and Y. Chen, Effect of the Particle Size and the Debinding Process on the Density of Alumina Ceramics Fabricated by 3D Printing Based on Stereolithography, Ceram. Int., 2016, 42(15), p 17290–17294. https://doi.org/10.1016/j.ceramint.2016.08.024CrossRef

59.

M. Zhou, W. Liu, H. Wu, X. Song, Y. Chen, L. Cheng, F. He, S. Chen, and S. Wu, Preparation of a Defect-Free Alumina Cutting Tool via Additive Manufacturing Based on Stereolithography—Optimization of the Drying and Debinding Processes, Ceram. Int., 2016, 42(10), p 11598–11602. https://doi.org/10.1016/j.ceramint.2016.04.050CrossRef

60.

Z. Chen, X. Song, L. Lei, X. Chen, C. Fei, C.T. Chiu, X. Qian, T. Ma, Y. Yang, K. Shung, and Y. Chen, 3D Printing of Piezoelectric Element for Energy Focusing and Ultrasonic Sensing, Nano Energy, 2016, 27, p 78–86. https://doi.org/10.1016/j.nanoen.2016.06.048CrossRef

61.

R.V. Oliveira, V. Soldi, M.C. Fredel, and A.T. Pires, Ceramic Injection Moulding: Influence of Specimen Dimensions and Temperature on Solvent Debinding Kinetics, J. Mater. Process. Technol., 2005, 160(2), p 213–220. https://doi.org/10.1016/j.jmatprotec.2004.06.008CrossRef

62.

Z. Xie, Y. Huang, J. Wu, and L. Zheng, Microwave Debinding of a Ceramic Injection Moulded Body, J. Mater. Sci. Lett., 1995, 14(11), p 794–795. https://doi.org/10.1007/BF00278131CrossRef

63.

M.N. Rahaman, Ceramic Processing and Sintering, CRC Press, Boca Raton, 2003

64.

W. Liu, H. Wu, M. Zhou, R. He, Q. Jiang, Z. Wu, Y. Cheng, X. Song, Y. Chen, and S. Wu, Fabrication of Fine-Grained Alumina Ceramics by a Novel Process Integrating Stereolithography and Liquid Precursor Infiltration Processing, Ceram. Int., 2016, 42(15), p 17736–17741. https://doi.org/10.1016/j.ceramint.2016.08.099CrossRef

65.

X. Li, Y. Yuan et al., 3D Printing of Hydroxyapatite/Tricalcium Phosphate Scaffold with Hierarchical Porous Structure for Bone Regeneration, Bio-Des Manuf., 2020, 3(1), p 15–29. https://doi.org/10.1007/s42242-019-00056-5CrossRef

66.

Y. Chen and C.C. Wang, Uniform Offsetting of Polygonal Model Based on Layered Depth-Normal Images, Comput. Aided Des., 2011, 43(1), p 31–46. https://doi.org/10.1016/j.cad.2010.09.002CrossRef

67.

Z. Zhu, N. Anwer, Q. Huang, and L. Mathieu, Machine Learning in Tolerancing for Additive Manufacturing, CIRP Ann., 2018, 67(1), p 157–160. https://doi.org/10.1016/j.cirp.2018.04.119CrossRef

68.

Q.Huang, 3D Printing Shrinkage Compensation Using Radial and Angular Layer Perimeter Point Information, U.S. Patent 9,886,526, 2018

69.

Q. Huang, H. Nouri, K. Xu, Y. Chen, S. Sosina, and T. Dasgupta, Statistical Predictive Modeling and Compensation of Geometric Deviations of Three-Dimensional Printed Products, J. Manuf. Sci. Eng., 2014 https://doi.org/10.1115/1.4028510CrossRef

70.

K. Xu and Y. Chen, Mask Image Planning for Deformation Control in Projection-Based Stereolithography Process, J. Manuf. Sci. Eng., 2015 https://doi.org/10.1115/1.4029802CrossRef

71.

K. Xu, T.H. Kwok, Z. Zhao, and Y. Chen, A Reverse Compensation Framework for Shape Deformation Control in Additive Manufacturing, J. Comput. Inf. Sci. Eng., 2017 https://doi.org/10.1115/1.4034874CrossRef

72.

X. Song, Z. Zhang, Z. Chen, and Y. Chen, Porous Structure Fabrication Using a Stereolithography-Based Sugar Foaming Method, J. Manuf. Sci. Eng., 2017 https://doi.org/10.1115/1.4034666CrossRef

73.

T. Thamaraiselvi and S. Rajeswari, Biological Evaluation of Bioceramic Materials—A Review, Carbon, 2004, 24(31), p 172.

74.

A. El-Ghannam, Bone Reconstruction: From Bioceramics to Tissue Engineering, Expert Rev. Med. Dev., 2005, 2(1), p 87–101. https://doi.org/10.1586/17434440.2.1.87CrossRef

75.

A. Macchetta, I.G. Turner, and C.R. Bowen, Fabrication of HA/TCP Scaffolds with a Graded and Porous Structure Using a Camphene-Based Freeze-Casting Method, Acta Biomater., 2009, 5(4), p 1319–1327. https://doi.org/10.1016/j.actbio.2008.11.009CrossRef

76.

X. Miao, D.M. Tan, J. Li, Y. Xiao, and R. Crawford, Mechanical and Biological Properties of Hydroxyapatite/Tricalcium Phosphate Scaffolds Coated with Poly(Lactic-Co-Glycolic Acid), Acta Biomater., 2008, 4(3), p 638–645. https://doi.org/10.1016/j.actbio.2007.10.006CrossRef

77.

A. Nakahira, T. Murakami, T. Onoki, T. Hashida, and K. Hosoi, Fabrication of Porous Hydroxyapatite Using Hydrothermal Hot Pressing and Post-Sintering, J. Am. Ceram. Soc., 2005, 88(5), p 1334–1336. https://doi.org/10.1111/j.1551-2916.2005.00238.xCrossRef

78.

A. Rakovsky, I. Gotman, E. Rabkin, and E.Y. Gutmanas, β-TCP-Polylactide Composite Scaffolds with High Strength and Enhanced Permeability Prepared by a Modified Salt Leaching Method, J. Mech. Behav. Biomed., 2014, 32, p 89–98. https://doi.org/10.1016/j.jmbbm.2013.12.022CrossRef

79.

R. Alluri, X. Song, S. Bougioukli, W. Pannell, V. Vakhshori, O. Sugiyama, A. Tang, S.H. Park, Y. Chen, and J.R. Lieberman, Regional Gene Therapy with 3D Printed Scaffolds to Heal Critical Sized Bone Defects in a Rat Model, J Biomed Mater Res A, 2019. https://doi.org/10.1002/jbm.a.36727CrossRef

80.

H. Wu, W. Liu, R. He, Z. Wu, Q. Jiang, X. Song, Y. Chen, L. Cheng, and S. Wu, Fabrication of Dense Zirconia-Toughened Alumina Ceramics through a Stereolithography-Based Additive Manufacturing, Ceram. Int., 2017, 43(1), p 968–972. https://doi.org/10.1016/j.ceramint.2016.10.027CrossRef

81.

X. Song, Z. Chen, L. Lei, K. Shung, Q. Zhou, and Y. Chen, Piezoelectric Component Fabrication Using Projection-Based Stereolithography of Barium Titanate Ceramic Suspensions, Rapid Prototyp. J., 2017, 23(1), p 44–53. https://doi.org/10.1108/RPJ-11-2015-0162CrossRef

82.

Z. Chen, X. Qian, X. Song, Q. Jiang, R. Huang, Y. Yang, R. Li, K. Shung, Y. Chen, and Q. Zhou, Three-Dimensional Printed Piezoelectric Array for Improving Acoustic Field and Spatial Resolution in Medical Ultrasonic Imaging, Micromachines, 2019, 10(3), p 170. https://doi.org/10.3390/mi10030170CrossRef

83.

Y.Z. Ji, Z. Wang, B. Wang, Y. Chen, T. Zhang, L.Q. Chen, X. Song, and L. Chen, Effect of Meso-Scale Geometry on Piezoelectric Performances of Additively Manufactured Flexible Polymer-Pb(Zr_xTi_1-_x)O₃ Composites, Adv. Eng. Mater., 2017, 19(6), p 1600803. https://doi.org/10.1002/adem.201600803CrossRef

84.

Y. Yang, Z. Chen, X. Song, B. Zhu, T. Hsiai, P.I. Wu, R. Xiong, J. Shi, Y. Chen, Q. Zhou, and K.K. Shung, Three-Dimensional Printing of High Dielectric Capacitor Using Projection Based Stereolithography Method, Nano Energy, 2016, 22, p 414–421. https://doi.org/10.1016/j.nanoen.2016.02.045CrossRef

85.

J. Luo, L.J. Gilbert, C. Qu, R.G. Landers, D.A. Bristow, and E.C. Kinzel, Additive Manufacturing of Transparent Soda-Lime Glass Using a Filament-Fed Process, J. Manuf. Sci. Eng., 2017 https://doi.org/10.1115/1.4035182CrossRef

86.

P.T. Brun, C. Inamura, D. Lizardo et al., The Molten Glass Sewing Machine, Philos. Trans. R. Soc. A, 2017, 375(2093), p 20160156. https://doi.org/10.1098/rsta.2016.0156CrossRef

87.

Z.C. Eckel, C. Zhou, J.H. Martin, A.J. Jacobsen, W.B. Carter, and T.A. Schaedler, Additive Manufacturing of Polymer-Derived Ceramics, Science, 2016, 351(6268), p 58–62. https://doi.org/10.1126/science.aad2688CrossRef

88.

P. Greil, Polymer Derived Engineering Ceramics, Adv. Eng. Mater., 2000, 2(6), p 339–348.CrossRef

89.

P. Colombo, Engineering Porosity in Polymer-Derived Ceramics, J. Eur. Ceram. Soc., 2008, 28(7), p 1389–1395. https://doi.org/10.1016/j.jeurceramsoc.2007.12.002CrossRef

90.

E. Zanchetta, M. Cattaldo, G. Franchin, M. Schwentenwein, J. Homa, G. Brusatin, and P. Colombo, Stereolithography of SiOC Ceramic Microcomponents, Adv. Mater., 2016, 28(2), p 370–376. https://doi.org/10.1002/adma.201503470CrossRef

91.

G. Mera, A. Navrotsky, S. Sen, H.J. Kleebe, and R. Riedel, Polymer-Derived SiCN and SiOC Ceramics—Structure and Energetics at the Nanoscale, J. Mater. Chem. A, 2013, 1(12), p 3826–3836. https://doi.org/10.1039/c2ta00727dCrossRef

92.

J. Bauer, A. Schroer, R. Schwaiger, and O. Kraft, Approaching Theoretical Strength in Glassy Carbon Nanolattices, Nat. Mater., 2016, 15(4), p 438. https://doi.org/10.1038/nmat4561CrossRef

93.

X. Song, Slurry Based Stereolithography: A Solid Freeform Fabrication Method of Ceramics and Composites, Doctoral dissertation, Ph.D. thesis, University of Southern California, Los Angeles, CA, 2016

Titel: Vat-Photopolymerization-Based Ceramic Manufacturing
verfasst von: Xiangjia Li
Yong Chen
Publikationsdatum: 06.07.2021
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 7/2021
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-021-05920-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7/2021

Scientometric Review of Trends on the Mechanical Properties of Additive Manufacturing and 3D Printing

Melt Pool and Heat Treatment Optimization for the Fabrication of High-Strength and High-Toughness Additively Manufactured 4340 Steel

Build Optimization for Selective Laser Melting of 316L Stainless Steel and Parameterization for Cross-Material Comparison and Process Design

Deformation Behavior of Cu-6.5 wt.% Al Alloy Under Quasi-Static Tensile Loading

Effect of Laser Energy Density on Surface Morphology, Microstructure, and Magnetic Properties of Selective Laser Melted Fe-3wt.% Si Alloys

3D-Printed Objects for Multipurpose Applications

Premium Partner

Marktübersichten