Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
ATZ-Fachkongress

Chassis.tech plus 2024


4 Kongresse in einer Veranstaltung

Treffen Sie in München die Fachleute von Chassis, Lenkung, Bremsen sowie Reifen/Räder.
Erweiterte Suche
Anmelden
nach oben
Progress in Additive Manufacturing
Erschienen in: Progress in Additive Manufacturing 5/2023

31.10.2022 | Review Article

A comprehensive review on fused deposition modelling of polylactic acid

verfasst von: L. Sandanamsamy, W. S. W. Harun, I. Ishak, F. R. M. Romlay, K. Kadirgama, D. Ramasamy, S. R. A. Idris, F. Tsumori

Erschienen in: Progress in Additive Manufacturing | Ausgabe 5/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Fused Deposition Modelling (FDM) is one of the additive manufacturing (AM) techniques that have emerged as the most feasible and prevalent approach for generating functional parts due to its ability to produce neat and intricate parts. FDM mainly utilises one of the widely used polymers, polylactic acid, also known as polylactide (PLA). It is an aliphatic polyester material and biocompatible thermoplastic, with the best design prospects due to its eco-friendly properties; when PLA degrades, it breaks down into water and carbon dioxide, neither of which are hazardous to the environment. However, PLA has its limitations of poor mechanical properties. Therefore, a filler reinforcement may enhance the characteristics of PLA and produce higher-quality FDM-printed parts. The processing parameters also play a significant role in the final result of the printed parts. This review aims to study and discover the properties of PLA and the optimum processing parameters. This review covers PLA in FDM, encompassing its mechanical properties, processing parameters, characterisation, and applications. A comprehensive description of FDM processing parameters is outlined as it plays a vital role in determining the quality of a printed product. In addition, PLA polymer is highly desirable for various field industrial applications such as in a medical, automobile, and electronic, given its excellent thermoplastic and biodegradability properties.
Vorheriger Artikel Standardisation efforts of ISO/TC 261 “additive manufacturing” 20th plenary meeting of ISO/TC 261 “additive manufacturing”
Nächster Artikel Electron-optical in-situ crack monitoring during electron beam powder bed fusion of the Ni-Base superalloy CMSX-4

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
Daminabo SC et al (2020) Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems. Mater Today Chem 16:100248CrossRef
2.
Dhinakaran V et al (2020) A review on recent advancements in fused deposition modeling. Mater Today 27:752–756
3.
Ngo TD et al (2018) Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos B 143:172–196CrossRef
4.
Penumakala PK, Santo J, Thomas A (2020) A critical review on the fused deposition modeling of thermoplastic polymer composites. Compos Part B 201:108336CrossRef
5.
Mohamed OA, Masood SH, Bhowmik JL (2015) Optimization of fused deposition modeling process parameters: a review of current research and future prospects. Adv Manuf 3(1):42–53CrossRef
6.
Mogan J et al (2021) A review of FDM and graphene-based polymer composite. IOP conference series: materials science and engineering. IOP Publishing, London
7.
Arif ZU, Khalid MY, Rehman EU (2022) Laser-aided additive manufacturing of high entropy alloys: processes, properties, and emerging applications. J Manuf Processes 78:131–171CrossRef
8.
Arif ZU et al (2022) Laser deposition of high-entropy alloys: a comprehensive review. Opt Laser Technol 145:107447CrossRef
9.
Harun W et al (2018) A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications. Powder Technol 331:74–97CrossRef
10.
Dutta B et al (2011) Direct metal deposition. Advanced materials and processes. Springer, Berlin, p 33
11.
Idris MH, Sharif S, Harun WSW (2022) Evaluation of ABS patterns produced from FDM for investment casting process. WIT Trans Eng Sci 64:319–328
12.
Harun W et al (2009) Characteristic studies of collapsibility of ABS patterns produced from FDM for investment casting. Mater Res Innov 13(3):340–343CrossRef
13.
Liu Z et al (2019) A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts. Int J Adv Manuf Technol 102(9–12):2877–2889CrossRef
14.
Cano-Vicent A et al (2021) Fused deposition modelling: current status, methodology, applications and future prospects. Addit Manuf 47:102378
15.
Arockiam AJ et al (2021) A review on PLA with different fillers used as a filament in 3D printing. Mater Today 50:2057–2064
16.
Solomon IJ, Sevvel P, Gunasekaran J (2020) A review on the various processing parameters in FDM. Mater Today 37:509–514
17.
Mohd-Puad NAS et al (2020) Review on the fabrication of fused deposition modelling (FDM) composite filament for biomedical applications. Mater Today 29:228–232
18.
Mohan N et al (2017) A review on composite materials and process parameters optimisation for the fused deposition modelling process. Virtual Phys Prototyp 12(1):47–59CrossRef
19.
Postiglione G et al (2015) Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling. Compos A 76:110–114CrossRef
20.
Kumar SD, Venkadeshwaran K, Aravindan M (2020) Fused deposition modelling of PLA reinforced with cellulose nano-crystals. Mater Today 33:868–875
21.
Sharma R (2018) Investigations for mechanical properties of Hap, PVC and PP based 3D porous structures obtained through biocompatible FDM filaments. Compos Part B
22.
Yang J-U, Cho JH, Yoo MJ (2017) Selective metallization on copper aluminate composite via laser direct structuring technology. Compos B 110:361–367CrossRef
23.
Kumar S et al (2021) 3D printed tensile and flexural prototypes of thermoplastic matrix reinforced with multi-materials: a statistical analysis. Mater Today 44:79–85
24.
Contreras-Naranjo JE et al (2021) 3D-printed hybrid-carbon-based electrodes for electroanalytical sensing applications. Electrochem Commun 130:107098CrossRef
25.
Nkomo N et al (2017) A study of applications of 3D printing technology and potential applications in the plastic thermoforming industry. IOSR J Eng 7:16–22
26.
Yu Y et al (2020) Material characterization and precise finite element analysis of fiber reinforced thermoplastic composites for 4D printing. Comput Aided Des 122:102817MathSciNetCrossRef
27.
Mohanavel V et al (2021) The roles and applications of additive manufacturing in the aerospace and automobile sector. Mater Today 47:405–409
28.
Wickramasinghe S, Do T, Tran P (2020) FDM-based 3D printing of polymer and associated composite: a review on mechanical properties, defects and treatments. Polymers 12(7):1529CrossRef
29.
Al-Ghamdi KA (2019) Sustainable FDM additive manufacturing of ABS components with emphasis on energy minimized and time efficient lightweight construction. Int J Lightweight Mater Manuf 2(4):338–345
30.
Cailleaux S et al (2021) Fused Deposition Modeling (FDM), the new asset for the production of tailored medicines. J Control Release 330:821–841CrossRef
31.
Obeid S et al (2021) Predicting drug release from diazepam FDM printed tablets using deep learning approach: Influence of process parameters and tablet surface/volume ratio. Int J Pharm 601:120507CrossRef
32.
Heidari-Rarani M, Rafiee-Afarani M, Zahedi A (2019) Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites. Compos B Eng 175:107147CrossRef
33.
Bhagia S et al (2021) Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineries. Appl Mater 24:101078
34.
Rahman MH, Bhoi PR (2021) An overview of non-biodegradable bioplastics. J Clean Prod 294:126218CrossRef
35.
Saini P, Arora M, Kumar M (2016) Poly(lactic acid) blends in biomedical applications. Adv Drug Deliv Rev 107:47–59CrossRef
36.
Jamshidian M et al (2010) Poly-lactic acid: production, applications, nanocomposites, and release studies. Compr Rev Food Sci Food Saf 9(5):552–571CrossRef
37.
Hu Y et al (2016) Newly developed techniques on polycondensation, ring-opening polymerization and polymer modification: Focus on poly (lactic acid). Materials 9(3):133CrossRef
38.
de França JOC et al (2022) Polymers based on PLA from synthesis using D, L-lactic acid (or racemic lactide) and some biomedical applications: a short review. Polymers 14(12):2317MathSciNetCrossRef
39.
Isikgor FH, Becer CR (2015) Lignocellulosic biomass: a sustainable platform for the production of bio-based chemicals and polymers. Polym Chem 6(25):4497–4559CrossRef
40.
Madhavan Nampoothiri K, Nair NR, John RP (2010) An overview of the recent developments in polylactide (PLA) research. Bioresour Technol 101(22):8493–8501CrossRef
41.
Farah S, Anderson DG, Langer R (2016) Physical and mechanical properties of PLA, and their functions in widespread applications : a comprehensive review. Adv Drug Deliv Rev 107:367–392CrossRef
42.
Auras R, Harte B, Selke S (2004) An overview of polylactides as packaging materials. Macromol Biosci 4(9):835–864CrossRef
43.
Gupta B, Revagade N, Hilborn J (2007) Poly(lactic acid) fiber: an overview. Prog Polym Sci 32(4):455–482CrossRef
44.
Lasprilla AJ et al (2012) Poly-lactic acid synthesis for application in biomedical devices - a review. Biotechnol Adv 30(1):321–328CrossRef
45.
Lopes MS, Jardini AL, Filho RM (2012) Poly (lactic acid) production for tissue engineering applications. Proced Eng 42:1402–1413CrossRef
46.
Fraschini C et al (2005) Cracking in polylactide spherulites. J Polym Sci, Part B 43(22):3308–3315CrossRef
47.
Henton DE et al (2005) Polylactic acid technology. Natl Fibers Biopolym Biocompos 16:527–577
48.
Auras RA et al (2011) Poly (lactic acid): synthesis, structures, properties, processing, and applications, 10th edn. John Wiley and Sons, London
49.
Nampoothiri KM, Nair NR, John RP (2010) An overview of the recent developments in polylactide (PLA) research. Bioresour Technol 101(22):8493–8501CrossRef
50.
Cheng Y et al (2009) Polylactic acid (PLA) synthesis and modifications: a review. Front Chem China 4(3):259–264CrossRef
51.
Broz M, VanderHart DL, Washburn N (2003) Structure and mechanical properties of poly (D, L-lactic acid)/poly (ε-caprolactone) blends. Biomaterials 24(23):4181–4190CrossRef
52.
Murariu M, Dubois P (2016) PLA composites: from production to properties. Adv Drug Deliv Rev 107:17–46CrossRef
53.
Bordes P, Pollet E, Averous L (2009) Nano-biocomposites: biodegradable polyester/nanoclay systems. Prog Polym Sci 34(2):125–155CrossRef
54.
Ray SS, Okamoto M (2003) Biodegradable polylactide and its nanocomposites: opening a new dimension for plastics and composites. Macromol Rapid Commun 24(14):815–840CrossRef
55.
Brzeziński M, Biela T (2014) Polylactide nanocomposites with functionalized carbon nanotubes and their stereocomplexes: a focused review. Mater Lett 121:244–250CrossRef
56.
Khalid MY et al (2021) Recent advances in nanocellulose-based different biomaterials: types, properties, and emerging applications. J Market Res 14:2601–2623
57.
Siqueira G, Bras J, Dufresne A (2010) Cellulosic bionanocomposites: a review of preparation, properties and applications. Polymers 2(4):728–765CrossRef
58.
59.
Ambrosio-Martín J et al (2015) Melt polycondensation to improve the dispersion of bacterial cellulose into polylactide via melt compounding: enhanced barrier and mechanical properties. Cellulose 22(2):1201–1226CrossRef
60.
Jaszkiewicz A, Bledzki AK, Franciszczak P (2013) Improving the mechanical performance of PLA composites with natural, man-made cellulose and glass fibers- a comparison to PP counterparts. Polimery 58(6):435–442CrossRef
61.
Graupner N et al (2016) Procedural influences on compression and injection moulded cellulose fibre-reinforced polylactide (PLA) composites: Influence of fibre loading, fibre length, fibre orientation and voids. Compos A 81:158–171CrossRef
62.
Graupner N, Herrmann AS, Müssig J (2009) Natural and man-made cellulose fibre-reinforced poly (lactic acid)(PLA) composites: an overview about mechanical characteristics and application areas. Compos 40(6–7):810–821CrossRef
63.
Bledzki AK, Jaszkiewicz A, Scherzer D (2009) Mechanical properties of PLA composites with man-made cellulose and abaca fibres. Compos A 40(4):404–412CrossRef
64.
Boissard CI et al (2012) Cellular biocomposites from polylactide and microfibrillated cellulose. J Cell Plast 48(5):445–458CrossRef
65.
Mathew AP, Oksman K, Sain M (2005) Mechanical properties of biodegradable composites from poly lactic acid (PLA) and microcrystalline cellulose (MCC). J Appl Polym Sci 97(5):2014–2025CrossRef
66.
Fox DM et al (2012) Char-forming behavior of nanofibrillated cellulose treated with glycidyl phenyl POSS. Carbohydr Polym 88(3):847–858CrossRef
67.
Oksman K et al (2016) Review of the recent developments in cellulose nanocomposite processing. Compos A 83:2–18CrossRef
68.
Lee K-Y, Blaker JJ, Bismarck A (2009) Surface functionalisation of bacterial cellulose as the route to produce green polylactide nanocomposites with improved properties. Compos Sci Technol 69(15–16):2724–2733CrossRef
69.
Khalid MY et al (2021) Tensile strength evaluation of glass/jute fibers reinforced composites: An experimental and numerical approach. Results in engineering 10:100232CrossRef
70.
71.
Huang X (2009) Fabrication and properties of carbon fibers. Materials 2(4):2369–2403CrossRef
72.
Cheng K-C et al (2015) Flammability and tensile properties of polylactide nanocomposites with short carbon fibers. J Mater Sci 50(4):1605–1612CrossRef
73.
Thunga M et al (2014) Bio-renewable precursor fibers from lignin/polylactide blends for conversion to carbon fibers. Carbon 68:159–166CrossRef
74.
Kasgoz A et al (2014) Effect of different types of carbon fillers on mechanical and rheological properties of cyclic olefin copolymer (COC) composites. Compos B 66:126–135CrossRef
75.
Mallakpour S, Soltanian S (2016) Surface functionalization of carbon nanotubes: fabrication and applications. RSC Adv 6(111):109916–109935CrossRef
76.
Han Z, Fina A (2011) Thermal conductivity of carbon nanotubes and their polymer nanocomposites: a review. Prog Polym Sci 36(7):914–944CrossRef
77.
Mittal G et al (2015) A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocomposites. J Ind Eng Chem 21:11–25CrossRef
78.
Rahmat M, Hubert P (2011) Carbon nanotube–polymer interactions in nanocomposites: a review. Compos Sci Technol 72(1):72–84CrossRef
79.
Wu D et al (2015) Polylactide composite foams containing carbon nanotubes and carbon black: Synergistic effect of filler on electrical conductivity. Carbon 95:380–387CrossRef
80.
Tsuji H et al (2007) Poly (l-lactide)/nano-structured carbon composites: conductivity, thermal properties, crystallization, and biodegradation. Polymer 48(14):4213–4225CrossRef
81.
Hapuarachchi TD, Peijs T (2010) Multiwalled carbon nanotubes and sepiolite nanoclays as flame retardants for polylactide and its natural fibre reinforced composites. Compos A 41(8):954–963CrossRef
82.
Li J, Lu X, Zheng Y (2008) Effect of surface modified hydroxyapatite on the tensile property improvement of HA/PLA composite. Appl Surf Sci 255(2):494–497CrossRef
83.
Armentano I et al (2010) Biodegradable polymer matrix nanocomposites for tissue engineering: a review. Polym Degrad Stab 95(11):2126–2146CrossRef
84.
Ignjatovic N, Uskokovic D (2004) Synthesis and application of hydroxyapatite/polylactide composite biomaterial. Appl Surf Sci 238(1–4):314–319CrossRef
85.
Scaffaro R et al (2017) Electrospun PCL/GO-g-PEG structures: processing-morphology-properties relationships. Compos A 92:97–107CrossRef
86.
Zaaba NF, Jaafar M (2020) A review on degradation mechanisms of polylactic acid: Hydrolytic, photodegradative, microbial, and enzymatic degradation. Polym Eng Sci 60(9):2061–2075CrossRef
87.
Vieira A et al (2011) Mechanical study of PLA–PCL fibers during in vitro degradation. J Mech Behav Biomed Mater 4(3):451–460CrossRef
88.
Pradhan R et al (2010) Compostability and biodegradation study of PLA–wheat straw and PLA–soy straw based green composites in simulated composting bioreactor. Bioresour Technol 101(21):8489–8491CrossRef
89.
Karamanlioglu M, Preziosi R, Robson GD (2017) Abiotic and biotic environmental degradation of the bioplastic polymer poly (lactic acid): a review. Polym Degrad Stab 137:122–130CrossRef
90.
Hung K-C, Chen Y-L, Wu J-H (2012) Natural weathering properties of acetylated bamboo plastic composites. Polym Degrad Stab 97(9):1680–1685CrossRef
91.
Khalid MY et al (2021) Developments in chemical treatments, manufacturing techniques and potential applications of natural-fibers-based biodegradable composites. Coatings 11(3):293MathSciNetCrossRef
92.
Tokiwa Y, Calabia BP (2006) Biodegradability and biodegradation of poly (lactide). Appl Microbiol Biotechnol 72(2):244–251CrossRef
93.
Laycock B et al (2017) Lifetime prediction of biodegradable polymers. Prog Polym Sci 71:144–189CrossRef
94.
Khalid MY et al (2022) Recent trends in recycling and reusing techniques of different plastic polymers and their composite materials. Sustain Mater Technol 31:e00382
95.
Bhagia S et al (2021) Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineries. Appl Mater Today 24:101078CrossRef
96.
Kabir SF, Mathur K, Seyam A-FM (2020) A critical review on 3D printed continuous fiber-reinforced composites: history, mechanism, materials and properties. Compos Struct 232:111476CrossRef
97.
98.
Noroozi R et al (2022) In vitro static and dynamic cell culture study of novel bone scaffolds based on 3D-printed PLA and cell-laden alginate hydrogel. Biomed Mater 17(4):045024MathSciNetCrossRef
99.
Damanpack AR, Sousa A, Bodaghi M (2021) Porous PLAs with controllable density by FDM 3D printing and chemical foaming agent. Micromachines (Basel) 12(8):866CrossRef
100.
Abeykoon C, Sri-Amphorn P, Fernando A (2020) Optimization of fused deposition modeling parameters for improved PLA and ABS 3D printed structures. Int J Lightweight Mater Manuf 3(3):284–297
101.
Solomon IJ, Sevvel P, Gunasekaran J (2021) A review on the various processing parameters in FDM. Mater Today 37:509–514
102.
Qattawi A, Alrawi B, Guzman A (2017) Experimental optimization of fused deposition modelling processing parameters: a design-for-manufacturing approach. Proced Manuf 10:791–803
103.
Doshi M et al (2021) Printing parameters and materials affecting mechanical properties of FDM-3D printed Parts: perspective and prospects. Mater Today 50:2269–2275
104.
Dave HK et al (2021) Effect of infill pattern and infill density at varying part orientation on tensile properties of fused deposition modeling-printed poly-lactic acid part. Proc Inst Mech Eng C J Mech Eng Sci 235(10):1811–1827CrossRef
105.
Baich L, Manogharan G, Marie H (2015) Study of infill print design on production cost-time of 3D printed ABS parts. Int J Rapid Manuf 5(3–4):308–319CrossRef
106.
Rayegani F, Onwubolu GC (2014) Fused deposition modelling (FDM) process parameter prediction and optimization using group method for data handling (GMDH) and differential evolution (DE). Int J Adv Manuf Technol 73(1–4):509–519CrossRef
107.
Wu W et al (2015) Influence of layer thickness and raster angle on the mechanical properties of 3D-printed PEEK and a comparative mechanical study between PEEK and ABS. Materials 8(9):5834–5846CrossRef
108.
Behzadnasab M, Yousefi AA (2016) Effects of 3D printer nozzle head temperature on the physical and mechanical properties of PLA based product. In: 12th International Seminar on Polymer Science and Technology
109.
de Toro EV et al (2019) Analysis of the influence of the variables of the fused deposition modeling (FDM) process on the mechanical properties of a carbon fiber-reinforced polyamide. Proced Manuf 41:731–738
110.
Barrios JM, Romero PE (2019) Improvement of surface roughness and hydrophobicity in PETG parts manufactured via fused deposition modeling (FDM): an application in 3D printed self–cleaning parts. Materials 12(15):2499CrossRef
111.
Prabhakar MM et al (2021) A short review on 3D printing methods, process parameters and materials. Mater Today 45:6108–6114
112.
Ray S, Cooney RP (2018) Thermal degradation of polymer and polymer composites. Handbook of environmental degradation of materials. Elsevier, Amsterdam, pp 185–206CrossRef
113.
Dorgan JR et al (2005) Melt rheology of variable L-content poly (lactic acid). J Rheol 49(3):607–619CrossRef
114.
Ehrenstein GW, Riedel G, Trawiel P (2012) Thermal analysis of plastics: theory and practice. Carl Hanser Verlag GmbH Co KG, Munich
115.
Yang L et al (2019) Effects of carbon nanotube on the thermal, mechanical, and electrical properties of PLA/CNT printed parts in the FDM process. Synth Met 253:122–130CrossRef
116.
Masruchin N, Munawar SS, Subyakto S (2011) Mechanical and thermal properties of poly (lactid acid) bamboo fiber composites. Jurnal Ilmu dan Teknologi Kayu Tropis 9(1):1–8
117.
Rajeshkumar G et al (2021) Environment friendly, renewable and sustainable poly lactic acid (PLA) based natural fiber reinforced composites–a comprehensive review. J Clean Prod 310:127483CrossRef
118.
Saadatkhah N et al (2020) Experimental methods in chemical engineering: Thermogravimetric analysis—TGA. Canad J Chem Eng 98(1):34–43CrossRef
119.
Mofokeng JP et al (2011) Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matrices. J Thermoplast Compos Mater 25(8):927–948CrossRef
120.
Pistor V et al (2012) Dynamic mechanical characterization of epoxy/epoxycyclohexyl–POSS nanocomposites. Mater Sci Eng A 532:339–345CrossRef
121.
Ornaghi HL, Pistor V, Zattera AJ (2012) Effect of the epoxycyclohexyl polyhedral oligomeric silsesquioxane content on the dynamic fragility of an epoxy resin. J Non-Cryst Solids 358(2):427–432CrossRef
122.
Qazvini NT, Mohammadi N (2005) Dynamic mechanical analysis of segmental relaxation in unsaturated polyester resin networks: effect of styrene content. Polymer 46(21):9088–9096CrossRef
123.
Jawaid M, Khalil HA, Alattas OS (2012) Woven hybrid biocomposites: dynamic mechanical and thermal properties. Compos A 43(2):288–293CrossRef
124.
Nair KM, Thomas S, Groeninckx G (2001) Thermal and dynamic mechanical analysis of polystyrene composites reinforced with short sisal fibres. Compos Sci Technol 61(16):2519–2529CrossRef
125.
Ramakrishnan S et al (2021) Dynamic mechanical properties and free vibration characteristics of surface modified jute fiber/nano-clay reinforced epoxy composites. J Polym Environ 29(4):1076–1088CrossRef
126.
Cristea M, Ionita D, Iftime MM (2020) Dynamic mechanical analysis investigations of PLA-based renewable materials: how are they useful? Materials (Basel) 13(22):5302CrossRef
127.
Mülhaupt R (2013) Green polymer chemistry and bio-based plastics: dreams and reality. Macromol Chem Phys 214(2):159–174CrossRef
128.
Nagarajan V, Mohanty AK, Misra M (2016) Perspective on polylactic acid (PLA) based sustainable materials for durable applications: focus on toughness and heat resistance. ACS Sustain Chem Eng 4(6):2899–2916CrossRef
129.
Wu F, Misra M, Mohanty AK (2019) Studies on why the heat deflection temperature of polylactide bioplastic cannot be improved by overcrosslinking. Polym Cryst 2(6):e10088
130.
Benwood C et al (2018) Improving the impact strength and heat resistance of 3D printed models: structure, property, and processing correlationships during fused deposition modeling (FDM) of poly (lactic acid). ACS Omega 3(4):4400–4411CrossRef
131.
Liu H, Zhang J (2011) Research progress in toughening modification of poly (lactic acid). J Polym Sci Part B 49(15):1051–1083CrossRef
132.
Rasal RM, Janorkar AV, Hirt DE (2010) Poly (lactic acid) modifications. Prog Polym Sci 35(3):338–356CrossRef
133.
Liu G-C et al (2014) In situ formed crosslinked polyurethane toughened polylactide. Polym Chem 5(7):2530–2539CrossRef
134.
Oyama HT (2009) Super-tough poly (lactic acid) materials: reactive blending with ethylene copolymer. Polymer 50(3):747–751CrossRef
135.
Sun S et al (2011) Polylactide toughening with epoxy-functionalized grafted acrylonitrile–butadiene–styrene particles. J Appl Polym Sci 122(5):2992–2999CrossRef
136.
Shanmugam V et al (2021) The mechanical testing and performance analysis of polymer-fibre composites prepared through the additive manufacturing. Polym Test 93:106925CrossRef
137.
Matsuzaki R et al (2016) Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation. Sci Rep 6(1):1–7CrossRef
138.
Li Y et al (2018) Additive manufacturing of PLA and CF/PLA binding layer specimens via fused deposition modeling. J Mater Eng Perform 27(2):492–500MathSciNetCrossRef
139.
Magri AE et al (2021) Mechanical properties of CF-reinforced PLA parts manufactured by fused deposition modeling. J Thermoplast Compos Mater 34(5):581–595CrossRef
140.
141.
Akhoundi B, Behravesh A (2019) Effect of filling pattern on the tensile and flexural mechanical properties of FDM 3D printed products. Exp Mech 59(6):883–897CrossRef
142.
Uddin MS et al (2017) Evaluating mechanical properties and failure mechanisms of fused deposition modeling acrylonitrile butadiene styrene parts. J Manuf Sci Eng 139(8):081018CrossRef
143.
Narang R, Chhabra D (2017) Analysis of process parameters of fused deposition modeling (FDM) technique. Int J Future Revolut Comput Sci Commun Eng 3(10):41–48
144.
145.
Oladapo BI et al (2021) Review on 3D printing: Fight against COVID-19. Mater Chem Phys 258:123943CrossRef
146.
147.
148.
149.
Gupta B, Revagade N, Hilborn J (2007) Poly (lactic acid) fiber: an overview. Prog Polym Sci 32(4):455–482CrossRef
150.
Yamane H, Sasai K (2003) Effect of the addition of poly (D-lactic acid) on the thermal property of poly (L-lactic acid). Polymer 44(8):2569–2575CrossRef
151.
Gruber P, Drumright R, Henton D (2000) Polylactic acid technology. Adv Mater 12(23):1841–1846CrossRef
152.
Kareem MM et al (2019) Hybrid core–shell scaffolds for bone tissue engineering. Biomed Mater 14(2):025008CrossRef
153.
Lee S et al (2018) Lactic acid assisted fabrication of bioactive three-dimensional PLLA/β-TCP fibrous scaffold for biomedical application. Chem Eng J 347:771–781CrossRef
154.
Song P et al (2018) Novel 3D porous biocomposite scaffolds fabricated by fused deposition modeling and gas foaming combined technology. Compos B 152:151–159CrossRef
155.
Oladapo BI, Zahedi S, Adeoye A (2019) 3D printing of bone scaffolds with hybrid biomaterials. Compos B 158:428–436CrossRef
156.
Zhao L et al (2019) Bionic design and 3D printing of porous titanium alloy scaffolds for bone tissue repair. Compos B 162:154–161CrossRef
157.
Dai X et al (2018) Zeolitic imidazole framework/graphene oxide hybrid functionalized poly (lactic acid) electrospun membranes: a promising environmentally friendly water treatment material. ACS Omega 3(6):6860–6866CrossRef
158.
Jaidev L, Chatterjee K (2019) Surface functionalization of 3D printed polymer scaffolds to augment stem cell response. Mater Des 161:44–54CrossRef
159.
da Silva TN et al (2019) Controlling burst effect with PLA/PVA coaxial electrospun scaffolds loaded with BMP-2 for bone guided regeneration. Mater Sci Eng C 97:602–612CrossRef
160.
Dürselen L et al (2001) Resorbable polymer fibers for ligament augmentation. J Biomed Mater Res 58(6):666–672CrossRef
161.
Coutu DL, Yousefi AM, Galipeau J (2009) Three-dimensional porous scaffolds at the crossroads of tissue engineering and cell-based gene therapy. J Cell Biochem 108(3):537–546CrossRef
162.
Kellomäki M et al (2000) Bioabsorbable scaffolds for guided bone regeneration and generation. Biomaterials 21(24):2495–2505CrossRef
163.
Papenburg BJ et al (2009) Development and analysis of multi-layer scaffolds for tissue engineering. Biomaterials 30(31):6228–6239CrossRef
164.
Behonick DJ et al (2007) Role of matrix metalloproteinase 13 in both endochondral and intramembranous ossification during skeletal regeneration. PLoS ONE 2(11):e1150CrossRef
165.
Caplan AI (2009) New era of cell-based orthopedic therapies. Tissue Eng Part B Rev 15(2):195–200CrossRef
166.
Kinoshita Y, Yokoya S, Amagasa T (2003) Reconstruction of jawbones using poly (L-lactic acid) mesh and transplantation of particulate cancellous bone and marrow: Long-term observation of 40 cases. Int J Oral Maxillofac Surg 32(2):117–120
167.
Eppley BL et al (2004) Resorbable PLLA-PGA plate and screw fixation in pediatric craniofacial surgery: clinical experience in 1883 patients. Plast Reconstr Surg 114(4):850–856CrossRef
168.
Imola MJ, Schramm VL (2002) Resorbable internal fixation in pediatric cranial base surgery. Laryngoscope 112(10):1897–1901CrossRef
169.
Masood SH, Singh JP, Morsi Y (2005) The design and manufacturing of porous scaffolds for tissue engineering using rapid prototyping. Int J Adv Manuf Technol 27(3):415–420CrossRef
170.
Liu S et al (2020) Current applications of poly (lactic acid) composites in tissue engineering and drug delivery. Compos Part B 199:108238CrossRef
171.
Teixeira BN et al (2019) Evaluation of bone marrow stem cell response to PLA scaffolds manufactured by 3D printing and coated with polydopamine and type I collagen. J Biomed Mater Res B 107(1):37–49CrossRef
172.
Sartore L et al (2019) PLA/PCL-based foams as scaffolds for tissue engineering applications. Mater Today 7:410–417
173.
Monnier A et al (2018) Functionalization of poly (lactic acid) scaffold surface by aminolysis and hyaluronan immobilization: How it affects mesenchymal stem cell proliferation. Eur Polymer J 107:202–217CrossRef
174.
Gentile P et al (2014) An overview of poly (lactic-co-glycolic) acid (PLGA)-based biomaterials for bone tissue engineering. Int J Mol Sci 15(3):3640–3659CrossRef
175.
Iqbal N et al (2019) Recent concepts in biodegradable polymers for tissue engineering paradigms: a critical review. Int Mater Rev 64(2):91–126CrossRef
176.
Guo Z et al (2018) Degradation properties of chitosan microspheres/poly (L-lactic acid) composite in vitro and in vivo. Carbohydr Polym 193:1–8CrossRef
177.
Asghari F et al (2017) Biodegradable and biocompatible polymers for tissue engineering application: a review. Artif Cells Nanomed Biotechnol 45(2):185–192CrossRef
178.
Shahrezaee M et al (2018) In vitro and in vivo investigation of PLA/PCL scaffold coated with metformin-loaded gelatin nanocarriers in regeneration of critical-sized bone defects. Nanomedicine 14(7):2061–2073CrossRef
179.
Türk M, Deliormanlı AM (2018) Graphene-containing PCL-coated porous 13–93B3 bioactive glass scaffolds for bone regeneration. Mater Res Express 5(4):045406CrossRef
180.
Katsogiannis KAG, Vladisavljević GT, Georgiadou S (2015) Porous electrospun polycaprolactone (PCL) fibres by phase separation. Eur Polym J 69:284–295CrossRef
181.
Ozdil D, Aydin HM (2014) Polymers for medical and tissue engineering applications. J Chem Technol Biotechnol 89(12):1793–1810CrossRef
182.
Zimmermann T et al (2018) In vitro degradation of a biodegradable polylactic acid/magnesium composite as potential bone augmentation material in the presence of titanium and PEEK dental implants. Dent Mater 34(10):1492–1500CrossRef
183.
Naghieh S et al (2017) Combination of PLA micro-fibers and PCL-gelatin nano-fibers for development of bone tissue engineering scaffolds. Int J Swarm Intell Evol Comput 6(1):1–4
184.
Drumright RE, Gruber PR, Henton DE (2000) Polylactic acid technology. Adv Mater 12(23):1841–1846CrossRef
185.
Garlotta D (2001) A literature review of poly (lactic acid). J Polym Environ 9(2):63–84CrossRef
186.
Armentano I et al (2013) Multifunctional nanostructured PLA materials for packaging and tissue engineering. Prog Polym Sci 38(10–11):1720–1747CrossRef
187.
Korger M et al (2016) Possible applications of 3D printing technology on textile substrates. IOP conference series: materials science and engineering. IOP Publishing, London
188.
Melnikova R, Ehrmann A, Finsterbusch K (2014) 3D printing of textile-based structures by fused deposition modelling (FDM) with different polymer materials. IOP conference series: materials science and engineering. IOP publishing, London
189.
Pei E, Shen J, Watling J (2015) Direct 3D printing of polymers onto textiles: experimental studies and applications. Rapid Prototyp J 21:1355–2546CrossRef
190.
Tao Y et al (2017) Development and application of wood flour-filled polylactic acid composite filament for 3D printing. Materials 10(4):339CrossRef
191.
Arif ZU et al (2022) A review on four-dimensional bioprinting in pursuit of advanced tissue engineering applications. Bioprinting 27:e00203CrossRef
192.
Bodaghi M et al (2019) 4D printing self-morphing structures. Materials 12(8):1353CrossRef
193.
194.
Roungpaisan N, Takasaki M, Takarada W, Kikutani T (2022) Mechanism of fiber structure development in melt spinning of pla Poly (Latice Acid) synthesis. Structures, Properties, Processing, Applications, and End of Life 10:425–38
195.
Kariz M et al (2018) Effect of wood content in FDM filament on properties of 3D printed parts. Mater Today Commun 14:135–140CrossRef
196.
Liu Z, Lei Q, Xing S (2019) Mechanical characteristics of wood, ceramic, metal and carbon fiber-based PLA composites fabricated by FDM. J Market Res 8(5):3741–3751
197.
Jiang G et al (2020) Investigation into hydroxypropyl-methylcellulose-reinforced polylactide composites for fused deposition modelling. Ind Crops Prod 146:112174CrossRef
198.
Guessasma S, Belhabib S, Nouri H (2019) Understanding the microstructural role of bio-sourced 3D printed structures on the tensile performance. Polym Test 77:105924CrossRef
199.
Islam MS, Pickering KL, Foreman NJ (2010) Influence of accelerated ageing on the physico-mechanical properties of alkali-treated industrial hemp fibre reinforced poly(lactic acid) (PLA) composites. Polym Degrad Stab 95(1):59–65CrossRef
200.
Sawpan MA, Pickering KL, Fernyhough A (2011) Improvement of mechanical performance of industrial hemp fibre reinforced polylactide biocomposites. Compos A 42(3):310–319CrossRef
201.
Mustapa IR et al (2018) Morphological structure and thermomechanical properties of hemp fibre reinforced poly(lactic acid) Nanocomposites plasticized with tributyl citrate. Mater Today 5(1):3211–3218
202.
Xiao X et al (2019) Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock. Compos Sci Technol 184:1077887CrossRef
203.
Dong J et al (2020) Carbonized cellulose nanofibers as dielectric heat sources for microwave annealing 3D printed PLA composite. Compos B 184:107640CrossRef
204.
Niu X et al (2018) Rosin modified cellulose nanofiber as a reinforcing and co-antimicrobial agents in polylactic acid /chitosan composite film for food packaging. Carbohydr Polym 183:102–109CrossRef
205.
Soman S, Chacko AS, Prasad VS (2017) Semi-interpenetrating network composites of poly(lactic acid) with cis -9-octadecenylamine modified cellulose-nanofibers from Areca catechu husk. Compos Sci Technol 141:65–73CrossRef
206.
Cisneros-López E et al (2020) Recycled poly (lactic acid)–based 3D printed sustainable biocomposites: a comparative study with injection molding. Mater Today Sustain 7:100027CrossRef
207.
Raj G et al (2009) Probing cellulose/polylactic acid interactions in model biocomposite by colloidal force microscopy. Colloids Surf A 352(1–3):47–55CrossRef
208.
Kale RD et al (2018) Preparation and characterization of biocomposite packaging film from poly(lactic acid) and acylated microcrystalline cellulose using rice bran oil. Int J Biol Macromol 118(Pt A):1090–1102CrossRef
209.
Zhang Q et al (2020) Improvement on the properties of microcrystalline cellulose/polylactic acid composites by using activated biochar. J Clean Prod 252:119898CrossRef
210.
Dong J et al (2019) 3D printed poly (lactic acid) composites with grafted cellulose nanofibers: Effect of nanofiber and post-fabrication annealing treatment on composite flexural properties. Addit Manuf 28:621–628
211.
Kowalczyk M et al (2011) Mechanical and thermal properties of PLA composites with cellulose nanofibers and standard size fibers. Compos A 42(10):1509–1514CrossRef
212.
Wang Y et al (2020) Cellulose nanofibers reinforced biodegradable polyester blends: Ternary biocomposites with balanced mechanical properties. Carbohydr Polym 233:115845CrossRef
213.
Wang Z et al (2017) Preparation of 3D printable micro/nanocellulose-polylactic acid (MNC/PLA) composite wire rods with high MNC constitution. Ind Crops Prod 109:889–896CrossRef
214.
Zhang Y et al (2019) Poly (lactic acid)/cellulose nanocrystal composites via the Pickering emulsion approach: Rheological, thermal and mechanical properties. Int J Biol Macromol 137:197–204CrossRef
215.
Zhang X et al (2018) Combined effect of cellulose nanocrystals and poly (butylene succinate) on poly (lactic acid) crystallization: the role of interfacial affinity. Carbohyd Polym 179:79–85CrossRef
216.
Cao X et al (2021) Preparation of different morphologies cellulose nanocrystals from waste cotton fibers and its effect on PLLA/PDLA composites films. Compos B 217:108934CrossRef
217.
Daver F et al (2018) Cork–PLA composite filaments for fused deposition modelling. Compos Sci Technol 168:230–237CrossRef
218.
Maqsood N, Rimašauskas M (2021) Characterization of carbon fiber reinforced PLA composites manufactured by fused deposition modeling. Composites C 4:100112
219.
Uşun A, Gümrük R (2021) The mechanical performance of the 3D printed composites produced with continuous carbon fiber reinforced filaments obtained via melt impregnation. Addit Manuf 46:102112
220.
Bhandari S, Lopez-Anido RA, Gardner DJ (2019) Enhancing the interlayer tensile strength of 3D printed short carbon fiber reinforced PETG and PLA composites via annealing. Addit Manuf 30:100922
221.
Ferreira RTL et al (2017) Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers. Compos B 124:88–100CrossRef
222.
Tandon S, Kacker R, Sudhakar K (2021) Experimental investigation on tensile properties of the polymer and composite specimens printed in a triangular pattern. J Manuf Process 68:706–715CrossRef
223.
Sharma P, Dhanopia AK, Joshi D (2021) An experimental study on carbon fiber thickness and layer thickness of depositing material in fused deposition modeling. Mater Today 44:4479–4484
224.
Srinivasan R et al (2020) Comparision of tribological behaviour for parts fabricated through fused deposition modelling (FDM) process on abs and 20% carbon fibre PLA. Mater Today 27:1780–1786
225.
Shunmugasundaram M, Maughal AAB, Ajay Kumar M (2020) A review of bio-degradable materials for fused deposition modeling machine. Mater Today 27:1596–1600
226.
Le Duigou A et al (2019) 3D printing of continuous flax fibre reinforced biocomposites for structural applications. Mater Des 180:107884CrossRef
227.
Cobos C et al (2019) Influence of the addition of 05 and 1% in weight of multi-wall carbon nanotubes (MWCNTs) in poly-lactic acid (PLA) for 3D printing. Proced Manuf 41:875–881
228.
Wu D et al (2020) 3D-printed PLA/HA composite structures as synthetic trabecular bone: A feasibility study using fused deposition modeling. J Mech Behav Biomed Mater 103:103608CrossRef
229.
Ranjan N et al (2021) 3D printed scaffolds for tissue engineering applications: Mechanical, morphological, thermal, in-vitro and in-vivo investigations. CIRP J Manuf Sci Technol 32:205–216CrossRef
230.
Gendviliene I et al (2020) Assessment of the morphology and dimensional accuracy of 3D printed PLA and PLA/HAp scaffolds. J Mech Behav Biomed Mater 104:103616CrossRef
231.
Lett JA et al (2020) Exploring the thumbprints of Ag-hydroxyapatite composite as a surface coating bone material for the implants. J Market Res 9(6):12824–12833
232.
Corcione CE et al (2019) Highly loaded hydroxyapatite microsphere/PLA porous scaffolds obtained by fused deposition modelling. Ceram Int 45(2):2803–2810CrossRef
233.
Mamatha S et al (2019) Fabrication of complex shaped ceramic articles from 3D printed polylactic acid templates by replication process. Ceram Int 45(15):19577–19580CrossRef
234.
Arastouei M et al (2021) The in-vitro biological properties of 3D printed poly lactic acid/akermanite composite porous scaffold for bone tissue engineering. Mater Today 27:102176
235.
Arastouei M et al (2020) Poly lactic acid-akermanite composite scaffolds prepared by fused filament fabrication for bone tissue engineering. J Market Res 9(6):14540–14548
236.
Cisneros-López E et al (2020) Recycled poly (lactic acid)–based 3D printed sustainable biocomposites: a comparative study with injection molding. Materials Today Sustainability 7:100027CrossRef
237.
Wang W et al (2021) 3D printing of PLA/n-HA composite scaffolds with customized mechanical properties and biological functions for bone tissue engineering. Compos B 224:109192CrossRef
238.
Ranjan N, Singh R, Ahuja I (2019) Investigations for mechanical properties of PLA-HAp-CS based functional prototypes. Mater Today 18:2329–2334
239.
Imran MA et al (2021) Mechanical properties of carbon particle mixed polylactic acid via fused deposition modeling. Mater Today 46:8590–8593
240.
Tirado-Garcia I et al (2021) Conductive 3D printed PLA composites: On the interplay of mechanical, electrical and thermal behaviours. Compos Struct 265:113744CrossRef
241.
Mishra PK, Senthil P (2020) Prediction of in-plane stiffness of multi-material 3D printed laminate parts fabricated by FDM process using CLT and its mechanical behaviour under tensile load. Mater Today Commun 23:100955CrossRef
242.
Rao VDP, Rajiv P, Geethika VN (2019) Effect of fused deposition modelling (FDM) process parameters on tensile strength of carbon fibre PLA. Mater Today 18:2012–2018
243.
Kumar MA, Khan M, Mishra S (2020) Effect of fused deposition machine parameters on tensile strength of printed carbon fiber reinforced PLA thermoplastics. Mater Today 27:1505–1510
244.
Balamurugan K et al (2021) Compression and flexural study on PLA-Cu composite filament using FDM. Mater Today 44:1687–1691
245.
Gunasekaran K et al (2021) Investigation of mechanical properties of PLA printed materials under varying infill density. Mater Today 45:1849–1856
246.
Gavali VC, Kubade PR, Kulkarni HB (2020) Property enhancement of carbon fiber reinforced polymer composites prepared by fused deposition modeling. Mater Today 23:221–229
Metadaten
Titel
A comprehensive review on fused deposition modelling of polylactic acid
verfasst von
L. Sandanamsamy
W. S. W. Harun
I. Ishak
F. R. M. Romlay
K. Kadirgama
D. Ramasamy
S. R. A. Idris
F. Tsumori
Publikationsdatum
31.10.2022
Verlag
Springer International Publishing
Erschienen in
Progress in Additive Manufacturing / Ausgabe 5/2023
Print ISSN: 2363-9512
Elektronische ISSN: 2363-9520
DOI
https://doi.org/10.1007/s40964-022-00356-w

Weitere Artikel der Ausgabe 5/2023

Progress in Additive Manufacturing 5/2023 Zur Ausgabe

Full Research Article

Electron-optical in-situ crack monitoring during electron beam powder bed fusion of the Ni-Base superalloy CMSX-4

Full Research Article

Insight into the mechanical properties of 3D printed strut-based lattice structures

Full Research Article

Evolution of equiaxed α/β microstructure of annealed SLM-built Ti64: role of TiB2

Full Research Article

Numerical and experimental investigation of the geometry dependent layer-wise evolution of temperature during laser powder bed fusion of Ti–6Al–4V

Editorial

Editorial PIAM November 2023

Full Research Article

The influence of laser surface remelting on the in vitro cell viability of additively manufactured Ti–6Al–4V plates

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise