nach oben

Progress in Additive Manufacturing

Erschienen in:

13.05.2020 | Review Article

Advances in modeling transport phenomena in material-extrusion additive manufacturing: Coupling momentum, heat, and mass transfer

verfasst von: Arit Das, Claire McIlroy, Michael J. Bortner

Erschienen in: Progress in Additive Manufacturing | Ausgabe 1/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Material-extrusion (MatEx) additive manufacturing involves layer-by-layer assembly of extruded material onto a printer bed and has found applications in rapid prototyping. Both material and machining limitations lead to poor mechanical properties of printed parts. Such problems may be addressed via an improved understanding of the complex transport processes and multiphysics associated with the MatEx technique. Thereby, this review paper describes the current (last 5 years) state of the art modeling approaches based on momentum, heat and mass transfer that are employed in an effort to achieve this understanding. We describe how specific details regarding polymer chain orientation, viscoelastic behavior, and crystallization are often neglected and demonstrate that there is a key need to couple the transport phenomena. Such a combined modeling approach can expand MatEx applicability to broader application space, thus we present prospective avenues to provide more comprehensive modeling and therefore new insights into enhancing MatEx performance.

Vorheriger Artikel Editorial PIAM January 2021

Nächster Artikel The role of 3D printing during COVID-19 pandemic: a review

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Herzog D, Seyda V, Wycisk E, Emmelmann C (2016) Additive manufacturing of metals. Acta Mater 117:371–392. https://doi.org/10.1016/j.actamat.2016.07.019CrossRef

Deckers J, Vleugels J, Kruth J-P (2014) Additive manufacturing of ceramics: a review. J Ceram Sci Technol 5:245–260. https://doi.org/10.4416/JCST2014-00032CrossRef

Jasiuk I, Abueidda DW, Kozuch C et al (2018) An overview on additive manufacturing of polymers. JOM 70:275–283. https://doi.org/10.1007/s11837-017-2730-yCrossRef

Ning F, Cong W, Qiu J et al (2015) Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling. Compos B Eng 80:369–378. https://doi.org/10.1016/j.compositesb.2015.06.013CrossRef

Ambrosi A, Pumera M (2016) 3D-printing technologies for electrochemical applications. Chem Soc Rev 45:2740–2755CrossRef

Gomez-Gras G, Jerez-Mesa R, Travieso-Rodriguez JA, Lluma-Fuentes J (2018) Fatigue performance of fused filament fabrication PLA specimens. Mater Des 140:278–285CrossRef

Northcutt LA, Orski SV, Migler KB, Kotula AP (2018) Effect of processing conditions on crystallization kinetics during materials extrusion additive manufacturing. Polymer 154:182–187CrossRef

Sun Q, Rizvi GM, Bellehumeur CT, Gu P (2008) Effect of processing conditions on the bonding quality of FDM polymer filaments. Rapid Prototyp J 14:72–80CrossRef

Huang Y, Leu MC, Mazumder J, Donmez A (2015) Additive manufacturing: current state, future potential, gaps and needs, and recommendations. J Manuf Sci Eng 137:014001CrossRef

10.

Gao W, Zhang Y, Ramanujan D et al (2015) The status, challenges, and future of additive manufacturing in engineering. Comput Aided Des 69:65–89. https://doi.org/10.1016/j.cad.2015.04.001CrossRef

11.

McIlroy C, Graham RS (2018) Modelling flow-enhanced crystallisation during fused filament fabrication of semi-crystalline polymer melts. Addit Manuf 24:323–340

12.

Turner BN, Strong R, Gold SA (2014) A review of melt extrusion additive manufacturing processes: I. Process design and modeling. Rapid Prototyp J 20:192–204. https://doi.org/10.1108/RPJ-01-2013-0012CrossRef

13.

Gold SA, Turner BN (2015) A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness. Rapid Prototyp J 21:250–261. https://doi.org/10.1108/RPJ-02-2013-0017CrossRef

14.

Parandoush P, Lin D (2017) A review on additive manufacturing of polymer-fiber composites. Compos Struct 182:36–53. https://doi.org/10.1016/j.compstruct.2017.08.088CrossRef

15.

Bird RB (2002) Transport phenomena. Appl Mech Rev 55:R1–R4. https://doi.org/10.1115/1.1424298CrossRef

16.

George KE (2009) Non-Newtonian fluid mechanics and polymer rheology. In: Thomas S, Weimin Y (eds) Advances in polymer processing. Woodhead Publishing, pp 13–46

17.

Bergman TL, Incropera FP, Lavine AS, DeWitt DP (2011) Introductiaon to heat transfer. Wiley, Hoboken

18.

Ferry JD (1980) Viscoelastic properties of polymers. Wiley, Hoboken

19.

Reiter G, Sommer J-U (2003) Polymer crystallization: obervations. Springer, Concepts and InterpretationsCrossRef

20.

Reiter G, Strobl GR (2007) Progress in understanding of polymer crystallization. Springer, BerlinCrossRef

21.

Lubombo C, Huneault MA (2018) Effect of infill patterns on the mechanical performance of lightweight 3D-printed cellular PLA parts. Mater Today Commun 17:214–228. https://doi.org/10.1016/j.mtcomm.2018.09.017CrossRef

22.

Mahmood S, Qureshi AJ, Goh KL, Talamona D (2017) Tensile strength of partially filled FFF printed parts: experimental results. Rapid Prototyp J 23:122–128. https://doi.org/10.1108/RPJ-08-2015-0115CrossRef

23.

García Plaza E, Núñez López PJ, Caminero Torija MÁ, Chacón Muñoz JM (2019) Analysis of PLA geometric properties processed by FFF additive manufacturing: effects of process parameters and plate-extruder precision motion. Polymers 11:1581. https://doi.org/10.3390/polym11101581CrossRef

24.

Young DJ, Otten C, Czabaj MW (2019) Effect of processing parameters on interlayer fracture toughness of fused filament fabrication thermoplastic materials. In: Kramer S, Jordan JL, Jin H, et al. (eds) Mechanics of additive and advanced manufacturing, vol 8. Springer International Publishing, Cham, pp 77–79

25.

Tsouknidas A, Pantazopoulos M, Katsoulis I et al (2016) Impact absorption capacity of 3D-printed components fabricated by fused deposition modelling. Mater Des 102:41–44. https://doi.org/10.1016/j.matdes.2016.03.154CrossRef

26.

Zandi MD, Jerez-Mesa R, Lluma-Fuentes J et al (2020) Experimental analysis of manufacturing parameters’ effect on the flexural properties of wood-PLA composite parts built through FFF. Int J Adv Manuf Technol 106:3985–3998. https://doi.org/10.1007/s00170-019-04907-4CrossRef

27.

Larson RG (2013) Constitutive equations for polymer melts and solutions: Butterworths series in chemical engineering. Butterworth-Heinemann, New York

28.

Piorkowska E, Rutledge GC (2013) Handbook of polymer crystallization. Wiley, HobokenCrossRef

29.

McIlroy C (2019) A fundamental rule: determining the importance of flow prior to polymer crystallization. Phys Fluids 31:113103. https://doi.org/10.1063/1.5129119CrossRef

30.

Hebda M, McIlroy C, Whiteside B et al (2019) A method for predicting geometric characteristics of polymer deposition during fused-filament-fabrication. Addit Manuf 27:99–108. https://doi.org/10.1016/j.addma.2019.02.013CrossRef

31.

Comminal R, Serdeczny MP, Pedersen DB, Spangenberg J (2018) Numerical modeling of the strand deposition flow in extrusion-based additive manufacturing. Addit Manuf 20:68–76. https://doi.org/10.1016/j.addma.2017.12.013CrossRef

32.

Serdeczny MP, Comminal R, Pedersen DB, Spangenberg J (2018) Experimental validation of a numerical model for the strand shape in material extrusion additive manufacturing. Addit Manuf 24:145–153. https://doi.org/10.1016/j.addma.2018.09.022CrossRef

33.

Agassant J-F, Pigeonneau F, Sardo L, Vincent M (2019) Flow analysis of the polymer spreading during extrusion additive manufacturing. Addit Manuf. https://doi.org/10.1016/j.addma.2019.100794CrossRef

34.

Gleadall A, Ashcroft I, Segal J (2018) VOLCO: a predictive model for 3D printed microarchitecture. Addit Manuf 21:605–618. https://doi.org/10.1016/j.addma.2018.04.004CrossRef

35.

Rodriguez JF, Thomas JP, Renaud JE (2000) Characterization of the mesostructure of fused-deposition acrylonitrile-butadiene-styrene materials. Rapid Prototyp J 6:175–186. https://doi.org/10.1108/13552540010337056CrossRef

36.

Costa SF, Duarte FM, Covas JA (2017) Estimation of filament temperature and adhesion development in fused deposition techniques. J Mater Process Technol 245:167–179CrossRef

37.

Anitha R, Arunachalam S, Radhakrishnan P (2001) Critical parameters influencing the quality of prototypes in fused deposition modelling. J Mater Process Technol 118:385–388. https://doi.org/10.1016/S0924-0136(01)00980-3CrossRef

38.

Bakrani Balani S, Chabert F, Nassiet V, Cantarel A (2019) Influence of printing parameters on the stability of deposited beads in fused filament fabrication of poly(lactic) acid. Addit Manuf 25:112–121. https://doi.org/10.1016/j.addma.2018.10.012CrossRef

39.

Xia H, Lu J, Tryggvason G (2019) A numerical study of the effect of viscoelastic stresses in fused filament fabrication. Comput Methods Appl Mech Eng 346:242–259. https://doi.org/10.1016/j.cma.2018.11.031MathSciNetCrossRefMATH

40.

Gilmer EL, Mansfield C, Gardner JM, et al (2019) Characterization and analysis of polyetherimide: realizing practical challenges of modeling the extrusion-based additive manufacturing process. In: Polymer-based additive manufacturing: recent developments. ACS Books

41.

Xia H, Lu J, Tryggvason G (2019) Simulations of fused filament fabrication using a front tracking method. Int J Heat Mass Transf 138:1310–1319. https://doi.org/10.1016/j.ijheatmasstransfer.2019.04.132CrossRef

42.

Heller BP, Smith DE, Jack DA (2016) Effects of extrudate swell and nozzle geometry on fiber orientation in Fused Filament Fabrication nozzle flow. Addit Manuf 12:252–264

43.

Denn MM (2008) Polymer melt processing: foundations in fluid mechanics and heat transfer. Cambridge University Press, CambridgeCrossRef

44.

Mackay ME, Swain ZR, Banbury CR et al (2017) The performance of the hot end in a plasticating 3D printer. J Rheol 61:229–236. https://doi.org/10.1122/1.4973852CrossRef

45.

Ravoori D, Lowery C, Prajapati H, Jain A (2019) Experimental and theoretical investigation of heat transfer in platform bed during polymer extrusion based additive manufacturing. Polym Testing 73:439–446. https://doi.org/10.1016/j.polymertesting.2018.11.025CrossRef

46.

Davis CS, Hillgartner KE, Han SH, Seppala JE (2017) Mechanical strength of welding zones produced by polymer extrusion additive manufacturing. Addit Manuf 16:162–166. https://doi.org/10.1016/j.addma.2017.06.006CrossRef

47.

Pourali M, Peterson AM (2019) Thermal modeling of material extrusion additive manufacturing. In: Polymer-based additive manufacturing: recent developments. American Chemical Society, pp 115–130

48.

Seppala JE, Han SH, Hillgartner KE et al (2017) Weld formation during material extrusion additive manufacturing. Soft Matter 13:6761–6769. https://doi.org/10.1039/C7SM00950JCrossRef

49.

Seppala JE, Migler KD (2016) Infrared thermography of welding zones produced by polymer extrusion additive manufacturing. Addit Manuf 12:71–76

50.

Coogan TJ, Kazmer DO (2017) Bond and part strength in fused deposition modeling. Rapid Prototyp J 23:414–422. https://doi.org/10.1108/RPJ-03-2016-0050CrossRef

51.

Compton BG, Post BK, Duty CE et al (2017) Thermal analysis of additive manufacturing of large-scale thermoplastic polymer composites. Addit Manuf 17:77–86. https://doi.org/10.1016/j.addma.2017.07.006CrossRef

52.

Osswald TA, Puentes J, Kattinger J (2018) Fused filament fabrication melting model. Addit Manuf 22:51–59. https://doi.org/10.1016/j.addma.2018.04.030CrossRef

53.

Costa SF, Duarte FM, Covas JA (2015) Thermal conditions affecting heat transfer in FDM/FFE: a contribution towards the numerical modelling of the process. Virtual Phys Prototyp 10:35–46. https://doi.org/10.1080/17452759.2014.984042CrossRef

54.

Wang P, Zou B, Xiao H et al (2019) Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK. J Mater Process Technol 271:62–74. https://doi.org/10.1016/j.jmatprotec.2019.03.016CrossRef

55.

D’Amico A, Peterson AM (2018) An adaptable FEA simulation of material extrusion additive manufacturing heat transfer in 3D. Addit Manuf 21:422–430. https://doi.org/10.1016/j.addma.2018.02.021CrossRef

56.

Zhang J, Wang XZ, Yu WW, Deng YH (2017) Numerical investigation of the influence of process conditions on the temperature variation in fused deposition modeling. Mater Des 130:59–68. https://doi.org/10.1016/j.matdes.2017.05.040CrossRef

57.

Zhou X, Hsieh S-J, Sun Y (2017) Experimental and numerical investigation of the thermal behaviour of polylactic acid during the fused deposition process. Virtual Phys Prototyp 12:221–233. https://doi.org/10.1080/17452759.2017.1317214CrossRef

58.

Zhou X, Hsieh S-J (2017) Thermal analysis of fused deposition modeling process using infrared thermography imaging and finite element modeling. In: Thermosense: thermal infrared applications XXXIX. International Society for Optics and Photonics, p 1021409

59.

Zhang Y, Shapiro V (2018) Linear-time thermal simulation of as-manufactured fused deposition modeling components. J Manuf Sci Eng 140:071002. https://doi.org/10.1115/1.4039556CrossRef

60.

Luo C, Wang X, Migler KB, Seppala JE (2020) Upper bound of feed rates in thermoplastic material extrusion additive manufacturing. Addit Manuf 32:101019. https://doi.org/10.1016/j.addma.2019.101019CrossRef

61.

Agur EE, Vlachopoulos J (1981) Heat transfer to molten polymer flow in tubes. J Appl Polym Sci 26:765–773. https://doi.org/10.1002/app.1981.070260302CrossRef

62.

AtifYardimci M, Hattori T, Guceri SI, Danforth SC (1997) Thermal analysis of fused deposition. In: 1997 international solid freeform fabrication symposium

63.

Coasey K, Hart KR, Wetzel E et al (2020) Nonisothermal welding in fused filament fabrication. Addit Manuf. https://doi.org/10.1016/j.addma.2020.101140CrossRef

64.

Phan DD, Horner JS, Swain ZR et al (2020) Computational fluid dynamics simulation of the melting process in the fused filament fabrication additive manufacturing technique. Addit Manuf 33:101161. https://doi.org/10.1016/j.addma.2020.101161CrossRef

65.

Edwards DA, Mackay M Post-Extrusion Heating in 3-D Printing. J Heat Transfer HT-19–1460: https://doi.org/10.1115/1.4046343

66.

Ravoori D, Prajapati H, Talluru V et al (2019) Nozzle-integrated pre-deposition and post-deposition heating of previously deposited layers in polymer extrusion based additive manufacturing. Addit Manuf 28:719–726. https://doi.org/10.1016/j.addma.2019.06.006CrossRef

67.

Prajapati H, Ravoori D, Jain A (2018) Measurement and modeling of filament temperature distribution in the standoff gap between nozzle and bed in polymer-based additive manufacturing. Addit Manuf 24:224–231. https://doi.org/10.1016/j.addma.2018.09.030CrossRef

68.

Phan DD, Swain ZR, Mackay ME (2018) Rheological and heat transfer effects in fused filament fabrication. J Rheol 62:1097–1107. https://doi.org/10.1122/1.5022982CrossRef

69.

Brenken B, Barocio E, Favaloro A et al (2019) Development and validation of extrusion deposition additive manufacturing process simulations. Addit Manuf 25:218–226

70.

Tadmor Z, Gogos CG (2013) Principles of polymer processing. Wiley, Hoboken

71.

Mackay ME (2018) The importance of rheological behavior in the additive manufacturing technique material extrusion. J Rheol 62:1549–1561. https://doi.org/10.1122/1.5037687CrossRef

72.

McIlroy C, Olmsted PD (2017) Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing. Polymer 123:376–391CrossRef

73.

Gutowski T, Jiang S, Cooper D et al (2017) Note on the rate and energy efficiency limits for additive manufacturing. J Ind Ecol 21:S69–S79. https://doi.org/10.1111/jiec.12664CrossRef

74.

Ge T, Pierce F, Perahia D et al (2013) Molecular dynamics simulations of polymer welding: strength from interfacial entanglements. Phys Rev Lett 110:098301. https://doi.org/10.1103/PhysRevLett.110.098301CrossRef

75.

Agrawal G, Wool RP, Dozier WD et al (1996) Interdiffusion of polymers across interfaces. J Polym Sci, Part B: Polym Phys 34:2919–2940. https://doi.org/10.1002/(SICI)1099-0488(199612)34:17%3c2919:AID-POLB6%3e3.0.CO;2-LCrossRef

76.

Hunt TA, Todd BD (2009) Diffusion of linear polymer melts in shear and extensional flows. J Chem Phys 131:054904. https://doi.org/10.1063/1.3202868CrossRef

77.

Ianniruberto G, Marrucci G (2013) Convective constraint release (CCR) revisited. J Rheol 58:89–102. https://doi.org/10.1122/1.4843957CrossRef

78.

Wu W, Geng P, Li G et al (2015) Influence of layer thickness and raster angle on the mechanical properties of 3D-printed PEEK and a comparative mechanical study between PEEK and ABS. Materials 8:5834–5846CrossRef

79.

McIlroy C, Seppala JE, Kotula AP (2019) Combining modeling and measurements to predict crystal morphology in material extrusion. In: Polymer-based additive manufacturing: recent developments. American Chemical Society, pp 85–113

80.

McIlroy C, Olmsted PD (2017) Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing. J Rheol 61:379–397CrossRef

81.

Zhang MC, Guo B-H, Xu J (2017) A review on polymer crystallization theories. Crystals 7:4. https://doi.org/10.3390/cryst7010004CrossRef

82.

Das A, Marnot AEC, Fallon JJ et al (2020) Material extrusion-based additive manufacturing with blends of polypropylene and hydrocarbon resins. ACS Appl Polym Mater 2:911–921. https://doi.org/10.1021/acsapm.9b01127CrossRef

83.

Schirmeister CG, Hees T, Licht EH, Mülhaupt R (2019) 3D printing of high density polyethylene by fused filament fabrication. Addit Manuf 28:152–159. https://doi.org/10.1016/j.addma.2019.05.003CrossRef

84.

Peng F, Jiang H, Woods A et al (2019) 3D Printing with core-shell filaments containing high or low density polyethylene shells. ACS Appl Polym Mater 1:275–285. https://doi.org/10.1021/acsapm.8b00186CrossRef

85.

Spoerk M, Gonzalez-Gutierrez J, Lichal C et al (2018) Optimisation of the adhesion of polypropylene-based materials during extrusion-based additive manufacturing. Polymers 10:490. https://doi.org/10.3390/polym10050490CrossRef

86.

Stoof D, Pickering K (2018) Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene. Compos B Eng 135:110–118. https://doi.org/10.1016/j.compositesb.2017.10.005CrossRef

87.

Fitzharris ER, Watt I, Rosen DW, Shofner ML (2018) Interlayer bonding improvement of material extrusion parts with polyphenylene sulfide using the Taguchi method. Addit Manuf 24:287–297

88.

Anderegg DA. In-situ monitoring and simulations of the non-isothermal crystallization of FFF printed materials. Master of Science Thesis, Virginia Tech

89.

Graham RS (2019) Understanding flow-induced crystallization in polymers: a perspective on the role of molecular simulations. J Rheol 63:203–214. https://doi.org/10.1122/1.5056170CrossRef

90.

Shmueli Y, Jiang J, Zhou Y et al (2019) Simultaneous in situ X-ray scattering and infrared imaging of polymer extrusion in additive manufacturing. ACS Appl Polym Mater 1:1559–1567. https://doi.org/10.1021/acsapm.9b00328CrossRef

91.

Shmueli Y, Lin Y-C, Lee S et al (2019) In situ time-resolved X-ray scattering study of isotactic polypropylene in additive manufacturing. ACS Appl Mater Interfaces 11:37112–37120. https://doi.org/10.1021/acsami.9b12908CrossRef

92.

Nogales A, Gutiérrez-Fernández E, García-Gutiérrez M-C et al (2019) Structure development in polymers during fused filament fabrication (FFF): an in situ small- and wide-angle X-ray scattering study using synchrotron radiation. Macromolecules. https://doi.org/10.1021/acs.macromol.9b01620CrossRef

93.

Oropallo W, Piegl LA (2016) Ten challenges in 3D printing. Eng Comput 32:135–148. https://doi.org/10.1007/s00366-015-0407-0CrossRef

94.

Duty C, Ajinjeru C, Kishore V et al (2018) What makes a material printable? A viscoelastic model for extrusion-based 3D printing of polymers. J Manuf Process 35:526–537. https://doi.org/10.1016/j.jmapro.2018.08.008CrossRef

95.

Levenhagen NP, Dadmun MD (2018) Interlayer diffusion of surface segregating additives to improve the isotropy of fused deposition modeling products. Polymer 152:35–41. https://doi.org/10.1016/j.polymer.2018.01.031CrossRef

96.

Boudara VAH, Peterson JD, Leal LG, Read DJ (2018) Nonlinear rheology of polydisperse blends of entangled linear polymers: Rolie-Double-Poly models. J Rheol 63:71–91. https://doi.org/10.1122/1.5052320CrossRef

97.

Brenken B, Barocio E, Favaloro A et al (2018) Fused filament fabrication of fiber-reinforced polymers: a review. Addit Manuf 21:1–16. https://doi.org/10.1016/j.addma.2018.01.002CrossRef

98.

Fallon JJ, McKnight SH, Bortner MJ (2019) Highly loaded fiber filled polymers for material extrusion: a review of current understanding. Addit Manuf. https://doi.org/10.1016/j.addma.2019.100810CrossRef

99.

Stupp C (2019) Enhancing the processing and product design of additive manufactured fiber reinforced polymers by fused filament fabrication. PhD Thesis, Technische Universiteit Eindhoven

100.

Prajapati H, Chalise D, Ravoori D et al (2019) Improvement in build-direction thermal conductivity in extrusion-based polymer additive manufacturing through thermal annealing. Addit Manuf 26:242–249. https://doi.org/10.1016/j.addma.2019.01.004CrossRef

101.

Dong J, Mei C, Han J et al (2019) 3D printed poly(lactic acid) composites with grafted cellulose nanofibers: effect of nanofiber and post-fabrication annealing treatment on composite flexural properties. Addit Manuf 28:621–628. https://doi.org/10.1016/j.addma.2019.06.004CrossRef

102.

Hart KR, Dunn RM, Sietins JM et al (2018) Increased fracture toughness of additively manufactured amorphous thermoplastics via thermal annealing. Polymer 144:192–204. https://doi.org/10.1016/j.polymer.2018.04.024CrossRef

103.

Duty CE, Kunc V, Compton B et al (2017) Structure and mechanical behavior of Big Area Additive Manufacturing (BAAM) materials. Rapid Prototyp J 23:181–189CrossRef

104.

Kishore V, Ajinjeru C, Nycz A et al (2017) Infrared preheating to improve interlayer strength of big area additive manufacturing (BAAM) components. Addit Manuf 14:7–12. https://doi.org/10.1016/j.addma.2016.11.008CrossRef

105.

Chesser P, Post B, Roschli A et al (2019) Extrusion control for high quality printing on Big Area Additive Manufacturing (BAAM) systems. Addit Manuf 28:445–455. https://doi.org/10.1016/j.addma.2019.05.020CrossRef

106.

Russell T, Heller B, Jack DA, Smith DE (2018) Prediction of the fiber orientation state and the resulting structural and thermal properties of fiber reinforced additive manufactured composites fabricated using the big area additive manufacturing process. J Compos Sci 2:26. https://doi.org/10.3390/jcs2020026CrossRef

107.

Ravoori D, Alba L, Prajapati H, Jain A (2018) Investigation of process-structure-property relationships in polymer extrusion based additive manufacturing through in situ high speed imaging and thermal conductivity measurements. Addit Manuf 23:132–139. https://doi.org/10.1016/j.addma.2018.07.011CrossRef

108.

Levine L, Lane B, Heigel J et al (2020) Outcomes and conclusions from the 2018 AM-bench measurements, challenge problems, modeling submissions, and conference. Integr Mater Manuf Innov 9:1–15. https://doi.org/10.1007/s40192-019-00164-1CrossRef

109.

Awaja F, Zhang S (2015) Self-bonding of PEEK for active medical implants applications. J Adhes Sci Technol 29:1593–1606CrossRef

110.

Bonten C, Schmachtenberg E (2001) A new hypothesis to describe the mechanisms acting in a welded joint of semicrystalline thermoplastics. Polym Eng Sci 41:475–483CrossRef

111.

Xue Y-Q, Tervoort TA, Rastogi S, Lemstra J (2000) Welding behavior of semicrystalline polymers. 2 Effect of cocrystallization on autoadhesion. Macromolecules 33:7084–7087CrossRef

Titel: Advances in modeling transport phenomena in material-extrusion additive manufacturing: Coupling momentum, heat, and mass transfer
verfasst von: Arit Das
Claire McIlroy
Michael J. Bortner
Publikationsdatum: 13.05.2020
Verlag: Springer International Publishing
Erschienen in: Progress in Additive Manufacturing / Ausgabe 1/2021
Print ISSN: 2363-9512
Elektronische ISSN: 2363-9520
DOI: https://doi.org/10.1007/s40964-020-00137-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2021

Mathematical design and preliminary mechanical analysis of the new lattice structure: “GE-SEZ*” structure processed by ABS polymer and FDM technology

Tailoring properties of photopolymers for additive manufacturing with mixture design

Editorial PIAM January 2021

Multi-objective optimization of machining factors on surface roughness, material removal rate and cutting force on end-milling using MWCNTs nano-lubricant

The influence of stiffener geometry on flexural properties of 3D printed polylactic acid (PLA) beams

First report on fabrication and characterization of soybean hull fiber: polymer composite filaments for fused filament fabrication

Premium Partner

Marktübersichten