nach oben

Erschienen in:

2020 | OriginalPaper | Buchkapitel

12. Burning Rate of PVC—Plastisol Composite Propellants and Correlation Between Closed Vessel and Strand Burner Tests Data

verfasst von : Abderrahmane Mezroua, Michel H. Lefebvre, Djalal Trache, Kamel Khimeche

Erschienen in: Innovative Energetic Materials: Properties, Combustion Performance and Application

Verlag: Springer Singapore

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The objective of this study is to assess two different methods used to determine the burning rates of solid rocket propellants and to find a convenient correlation of the measured data. The well-known strand burner test (Crawford test) and the closed vessel test were employed. In order to clarify the relation between the two techniques, a composite propellant containing polyvinyl chloride (PVC) as matrix and ammonium perchlorate (AP) as an oxidizer is used. It is prepared using normal AP (without heat treatment, nPoAP) or porous AP (after heat treatment, PoAP). Dioctyl phthalate (DOP) or dibutyl sebacate (DBS) was used as plasticizer. The PVC-Plastisol propellant burning rate behavior with respect to pressure, oxidizer nature, and propellant composition is analyzed. The obtained results show an acceptable correlation between the two techniques over the pressure range from 5 to 25 MPa.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vorheriges Kapitel Survey of Low-Burn-Rate Solid Rocket Propellants

Nächstes Kapitel Modern Approaches to Formulation Design and Production

Sutton GP, Biblarz O (2016) Rocket propulsion elements. Wiley

Davenas A (2003) Development of modern solid propellants. J Propul Power 19:1108–1128CrossRef

Fry RS (2001) Solid propellant test motor scaling, vol Ed^Eds: Editor. Chemical Ppropulsion Information Agency Columbia, MD, City

Trache D, Maggi F, Palmucci I, DeLuca LT, Khimeche K, Fassina M, Dossi S, Colombo G (2015) Effect of amide-based compounds on the combustion characteristics of composite solid rocket propellants. Arab J Chem

Kohga M, Togo S (2018) Influence of iron oxide on thermal decomposition behavior and burning characteristics of ammonium nitrate/ammonium perchlorate-based composite propellants. Combust Flame 192:10–24CrossRef

Crawford B, Huggett C, Daniels F, Wilfong R (1947) Direct determination of burning rates of propellant powders. Anal Chem 19:630–633CrossRef

Gupta G, Jawale L, Mehilal D, Bhattacharya B (2015) Various methods for the determination of the burning rates of solid propellants: an overview. Cent Eur J Energy Mater 12

Jeunieau L, Lefebvre MH, Guillaume P (2007) Ballistic stability of a spherical propellant: comparison with a flattened spherical propellant. Cent Eur J Energy Mater 4:31–44

Leu AL, Yeh TF, Chang FM, Liu CS, Huang CC, Liu F, Shih YS (1989) Burning behavior of composite solid propellant containing porous ammonium perchlorate. Propellants Explos Pyrotech 14:108–112CrossRef

10.

Kohga M, Hagihara Y (1996) The preparation of fine porous ammonium perchlorate by the spray-drying method. J Soc Powder Technol Jpn 33:273–278CrossRef

11.

Kohga M (2008) Effect of voids inside AP particles on burning rate of AP/HTPB composite propellant. Propellants Explos Pyrotech: An Intl J Deal Sci Technol Asp Energy Mater 33:249–254CrossRef

12.

Kohga M, Hagihara Y (1997) The spray-drying of ammonium perchlorate by ultrasonic comminution. J Soc Powder Technol Jpn 34:522–527CrossRef

13.

de Oliveira J, Platt G, Peixoto F (2005) Estimation of ballistic parameters of gun propellants through closed vessel experiment modeling. Revista de Engenharia Térmica. 4:50–55CrossRef

14.

Jeunieau L, Lefebvre M, Guillaume P, Wilker S, Chevalier S (2005) Stability analyses of rolled ball propellants, Part III–correlation between closed vessel tests, ballistic firing and deterrent migration, 36th Int, vol 14, Ed^Eds: Editor, City

15.

Jeunieau L, Lefebvre MH, Papy A, Pirlot MC, Guillaume P, Reynaud C (2002) Closed vessel test: influence of the ignition method on the combustion rate, vol Ed^Eds: Editor. Fraunhofer-Institut fur Chemische Technologie, Berghausen, 1999, City, pp V25–V25

16.

NATOS (1997) 4115 Definition and determination of ballistic properties of gun propellants, vol Ed^Eds: Editor, City

17.

Trache D, Klapötke TM, Maiz L, Abd-Elghany M, DeLuca LT (2017) Recent advances in new oxidizers for solid rocket propulsion. Green Chem 19:4711–4736CrossRef

18.

Kohga M (2006) Burning characteristics of AP/HTPB composite propellants prepared with fine porous or fine hollow ammonium perchlorate. Propellants Explos Pyrotech 31:50–55CrossRef

19.

George W (2004) Handbook of plasticizers. ChemTech Publishing, Toronto, Ontario M1E 1C6, Canada

20.

Kishore K, Sridhara K (1996) Influence of structure of polymeric fuels on the combustion behaviour of composite solid propellants. Fuel 75:912–918CrossRef

21.

McClain M, Gunduz I, Son S (2019) Additive manufacturing of ammonium perchlorate composite propellant with high solids loadings. Proc Combust Inst 37:3135–3142CrossRef

22.

Dillier CA, Petersen ED, Sammet T, Rodriguez FA, Thomas JC, Petersen EL (2019) Very-High-Pressure burning rates of AP/HTPB-Composite propellants with varying AP particle sizes and distributions, vol Ed^Eds: Editor, City, pp 43–68

23.

Mezroua A, Khimeche K, Lefebvre MH, Benziane M, Trache D (2014) The influence of porosity of ammonium perchlorate (AP) on the thermomechanical and thermal properties of the AP/polyvinylchloride (PVC) composite propellants. J Therm Anal Calorim 116:279–286CrossRef

24.

Trache D, Maggi F, Palmucci I, DeLuca LT (2018) Thermal behavior and decomposition kinetics of composite solid propellants in the presence of amide burning rate suppressants. J Therm Anal Calorim 132:1601–1615CrossRef

25.

Boulkadid KM, Trache D, Kari S, Lefebvre MH, Jeunieau L, Dejeaifve A (2020) Estimation of the ballistic parameters of double base gun propellants. Propellants Explos Pyrotech

26.

Ahmed Maraden PS, Matyaš R, Zigmund J (2017) Ballistic testing and thermal behavior of cast double-base propellant containing BuNENA. Chin J Explos Propellants 40:23–28

Titel: Burning Rate of PVC—Plastisol Composite Propellants and Correlation Between Closed Vessel and Strand Burner Tests Data
verfasst von: Abderrahmane Mezroua
Michel H. Lefebvre
Djalal Trache
Kamel Khimeche
Verlag: Springer Singapore
Buch: Innovative Energetic Materials: Properties, Combustion Performance and Application
Print ISBN: 978-981-15-4830-7

Electronic ISBN: 978-981-15-4831-4

Copyright-Jahr: 2020
DOI: https://doi.org/10.1007/978-981-15-4831-4_12