nach oben

Mechanics of Composite Materials

Erschienen in:

05.09.2023

Coil-Processing of CFRP Bandages for Rotors of High-Speed Synchronous Electric Machines with Permanent Magnets

verfasst von: A. Yu. Sergeev, R. A. Turusov, V. I. Solodilov

Erschienen in: Mechanics of Composite Materials | Ausgabe 4/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A method for calculating a structural element of high-speed synchronous machines with permanent magnets is proposed. The stresses arising in the CFRP bandage during operation are investigated. Expressions describing the stress-strain state of a permanent magnet in the form of a ring at rotation are suggested. Expressions describing the stress-strain state of an anisotropic composite bandage are obtained. The stresses-strain state of a structure consisting of a spindle with permanent magnets and a CFRP bandage is numerically investigated.

Vorheriger Artikel An Analytical-Numerical Coupled Model for an Aeroelastic Analysis of Tail Flutter Based on Bending–Torsional Coupling

Nächster Artikel Nonlinear Buckling Analysis of Stiffened Carbon Nanotube-Reinforced Cylindrical Shells Subjected to External Pressure in Thermal Environment

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Z. Kolondzovski, A. Belahcen, and A. Arkkio, “Multiphysics thermal design of a high-speed permanent-magnet machine,” Appl. Thermal Eng., 29, 2693-2700 (2009).CrossRef

B. Hannon, P. Sergeant, and L. Dupre, “Torque and torque components in high-speed permanent-magnet synchronous machines with a shielding cylinder,” Math. Comput. Simulation (2015). https://doi.org/10.1016/j.matcom.2015.09.006CrossRef

Lei Zu, Hui Xu, Bing Zhang, et al., “Filament-wound composite sleeves of permanent magnet motor rotors with ultra-high fiber tension,” Compos. Struct., 204, 525-535 (2018).CrossRef

M. Yazdani-Asrami, M. Zhang, and W. Yuan, “Challenges for developing high temperature superconducting ring magnets for rotating electric machine applications in future electric aircrafts,” J. Magnetism and Magnetic Mater., (2020). doi: https://doi.org/10.1016/j.jmmm.2020.167543CrossRef

B-J. Wang, B. Liu-Xin, C. Liang, et al., “Strength analysis of a surface mounted high speed permanent magnetic machine rotor with carbon fiber bandage,” Mater. Sci., 47, No. 12, 2101-2110 (2013).

S. N. Zotov, “The strength of the magnet and the rotor bandage of a high-speed electric drive with permanent magnets,” [Electronic resource], https://docplayer.com/46881766-Prochnost-magnita-i-bandazha-rotora-vysokoskorostnogo-elektroprivoda-na-postoyannyh-magnitah.html

V. B. Atabekov, Repair of Electrical Equipment of Industrial Enterprises, Textbook for PTU, 5th ed., Rev, M., Vysshaya Shkola (1985).

A. M. Kuperman, Yu. A. Gorbatkina, R. A. Turusov, and V. G. Ivanova-Mumzhieva, “Unidirectional composite materials for rotor shrouds of high-speed current generators,” Sborn. Statei, Polimery, 67-74 (2003).

A. B. Elakov, R. A. Turusov, E. A. Bogachev, and A. Yu. Sergeev, “Simulation of the stress-strain state of a non-woven canvas when wound on a cylindrical mandrel,” Nauch.-Tekhn. Vedom. SPbPU, Estestv. Inzh. Nauk, 24, No. 2, 149-160 (2018). DOI: https://doi.org/10.18721/JEST.240213.

10.

Yu. M. Tarnopolsky and G. G. Portnov, “Change in the tension force during winding of fiberglass products,” Polymer Mech., No. 2, 278-284 (1966).

11.

R. A. Turusov, S. P. Davtyan, et al., “Mechanical phenomena in conditions of propagation of curing front,” Dokl. AN SSSR, 247, No. 1, 97-99 (1979).

12.

V. V. Metlov and R. A. Turusov, “On the formation of the stress state of viscoelastic bodies growing under conditions of frontal curing,” Izv. AN SSSR. Mech. of Solids, No. 6, 145-160 (1985).

13.

A. Sergeev, R. Turusov, A. Gorenberg, and A. Kuperman, “Influence of the binder filtration on residual stresses in manufacturing composite constructions,” MATEC Web of Conferences, IPICSE (2018).

14.

A. Y. Sergeyev, R. A. Turusov, N. I. Baurova, et al., “Stresses arising during cure of the composite wound on the cylindrical surface of an element of exhaust system,” Mech. Compos. Mater., 51, 321-332 (2015).CrossRef

15.

V. N. Korotkov, R. A. Turusov, E. A. Dzhavadyan, and B. A. Rosenberg, “Technological stresses in the cure of cylindrical products made of polymer composite materials,” Mech. Compos. Mater., No. 1, 118-123 (1986).

16.

V. I. Demichev, A. Y. Sergeev, T. A. Motova, et al., “Polymer-composite vessels with a high mass perfection for the storage and transportation of a high-pressure gas,” Mech. Compos. Mater., 57, 785-794 (2022). https://doi.org/10.1007/s11029-022-09999-w

17.

A. N. Polilov, O. Y. Sklemina, and N. A. Tatus’, “Design method of reinforcement structure with symmetric pairs of layers by the example of composite gas tank,” Mech. Compos. Mater., 57, 769-784 (2022). https://doi.org/10.1007/s11029-022-09998-x

18.

Y. Q. Li and D. H. Zhang, “Local stress distributions in fiber-reinforced composites with consideration of thermal stresses during the curing process,” Mech. Compos. Mater., 57, 859 (2022). https://doi.org/10.1007/s11029-022-10006-5CrossRef

19.

G. G. Portnov and Y. M. Tarnopol’skii, “Energy capacity of rotating composite disks and shells (a review).,” Mech. Compos. Mater., 18, 203-211 (1982).

20.

V. M. Akhundov and M. M. Kostrova, “Nonlinear deformation of a piecewise homogeneous cylinder under the action of rotation.,” Mech. Compos. Mater., 54, 231-242 (2018).CrossRef

21.

M. A. Conteh and E. C. Nsofor, “Composite flywheel material design for high-speed energy storage,” J. Appl. Research and Technol., 14, 184-190 (2016).CrossRef

22.

N. A. Alfutov, P. A. Zinoviev, and B. G. Popov, Calculation of Multilayer Plates and Shells From Composite Materials, Mashinostroenie, Moscow (1984).

Titel: Coil-Processing of CFRP Bandages for Rotors of High-Speed Synchronous Electric Machines with Permanent Magnets
verfasst von: A. Yu. Sergeev
R. A. Turusov
V. I. Solodilov
Publikationsdatum: 05.09.2023
Verlag: Springer US
Erschienen in: Mechanics of Composite Materials / Ausgabe 4/2023
Print ISSN: 0191-5665
Elektronische ISSN: 1573-8922
DOI: https://doi.org/10.1007/s11029-023-10130-w

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2023

Influence of Polyethersulfone on the Fracture Toughness of Epoxy Matrices and Reinforced Plastics on Their Basis

Micromechanical Models for Analyzing Bending of Porous/Perfect FG Plates in a Hygro-Thermomechanical Environment by a Quasi-3D Theory

Buckling Analysis of Functionally Graded Sandwich Plates Resting on an Elastic Foundation and Subjected to a Nonuniform Loading

Nonlinear Bending Study of Composite Singly Curved Stiffened Shells with Complicated Boundary Conditions

Some Conferences and Congresses (Composites & Advanced Materials)

Solving the Stress Singularity Problem in Boundary-Value Problems of the Mechanics of Adhesive Joints and Layered Structures by Introducing a Contact Layer Model. Part 1. Resolving Equations for Multilayered Beams

Premium Partner

Marktübersichten