nach oben

Tribology Letters

Erschienen in:

01.06.2022 | Tribology Methods

Dead Weight Microtribometer Calibration for Improved Tolerance to Transducer Crosstalk and Cantilever Torsion

verfasst von: Qingrui Song, Kun Liu, Wei Sun, Jiaxin Ye

Erschienen in: Tribology Letters | Ausgabe 2/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A notable double-leaf planar cantilever design provides independent high force sensitivities in two orthogonal directions and has been used in a body of commercial and custom-built microtribometers. Friction experiments on such instruments are sensitive to signal crosstalk from component misalignment, interplay between cantilever torsion and bending, and tilt of the sliding counterface. We propose here a two-step dead weight calibration method comprising the attainment of the (1) transducer crosstalk matrix and (2) the cantilever torsional sensitivities. The proposed method could (1) eliminate signal crosstalk from multiple sources, (2) extract the true friction coefficient from a standard reciprocated friction test, and (3) guide the cantilever design for minimum crosstalk.

Graphical Abstract

Vorheriger Artikel A Tribometric Device for the Rolling Contact of Soft Elastomers

Nächster Artikel Evaluation of Wear Measurement with Radioactive Isotopes for DLC Coatings Affected by Abrasive Particles

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Bhushan, B., Kulkarni, A.V.: Effect of normal load on microscale friction measurements. Thin Solid Films 278, 49–56 (1996). https://doi.org/10.1016/0040-6090(95)08138-0CrossRef

Bhushan, B., Liu, H., Hsu, S.M.: Adhesion and friction studies of silicon and hydrophobic and low friction films and investigation of scale effects. J. Tribol. 126, 583–590 (2004). https://doi.org/10.1115/1.1739407CrossRef

Tambe, N.S., Bhushan, B.: Scale dependence of micro/nano-friction and adhesion of MEMS/NEMS materials, coatings and lubricants. Nanotechnology 15, 1561–1570 (2004). https://doi.org/10.1088/0957-4484/15/11/033CrossRef

Yoon, E.-S., Singh, R.A., Oh, H.-J., Kong, H.: The effect of contact area on nano/micro-scale friction. Wear 259, 1424–1431 (2005). https://doi.org/10.1016/j.wear.2005.01.033CrossRef

Garabedian, N.T., Khare, H.S., Carpick, R.W., Burris, D.L.: AFM at the macroscale: methods to fabricate and calibrate probes for millinewton force measurements. Tribol. Lett. 67, 21 (2019). https://doi.org/10.1007/s11249-019-1134-2CrossRef

Burris, D.L., Bonnevie, E.D., Baro, V.J., Wang, L.: In situ studies of cartilage microtribology: roles of speed and contact area. Tribol. Lett. 41, 83–95 (2011). https://doi.org/10.1007/s11249-010-9687-0CrossRef

Burris, D.L., Sawyer, W.G.: Addressing practical challenges of low friction coefficient measurements. Tribol. Lett. 35, 17–23 (2009). https://doi.org/10.1007/s11249-009-9438-2CrossRef

Cobb, J.A., Dunn, A.C., Kwon, J., Sarntinoranont, M., Sawyer, W.G., Tran-Son-Tay, R.: A novel method for low load friction testing on living cells. Biotechnol. Lett. 30, 801–806 (2008). https://doi.org/10.1007/s10529-007-9623-zCrossRef

Liu, H., Bhushan, B.: Adhesion and friction studies of microelectromechanical systems/nanoelectromechanical systems materials using a novel microtriboapparatus. J. Vac. Sci. Technol. A Vac. Surf. Films 21, 1528–1538 (2003). https://doi.org/10.1116/1.1560711CrossRef

10.

Gerbig, Y.B., Ahmed, S.I.-U., Chetwynd, D.G.: Friction and wear behaviour of pyramidal nanoscaled surface features. Wear 265, 497–506 (2008). https://doi.org/10.1016/j.wear.2007.11.017CrossRef

11.

Rennie, A.C., Dickrell, P.L., Sawyer, W.G.: Friction coefficient of soft contact lenses: measurements and modeling. Tribol. Lett. 18, 499–504 (2005). https://doi.org/10.1007/s11249-005-3610-0CrossRef

12.

Barriga, J.: Microtribological analysis of gold and copper contacts. Tribol. Int. 40(10–12), 1526–1530 (2007)CrossRef

13.

Mollenhauer, O., Ahmed, S.I.-U., Spiller, F., Haefke, H.: High-precision positioning and measurement systems for microtribotesting. Tribotest 12, 189–199 (2006). https://doi.org/10.1002/tt.18CrossRef

14.

Song, Q., Liu, K., Sun, W., Chen, R., Ji, J., Jiao, Y., Gao, T., Ye, J.: Lateral and normal capillary force evolution of a reciprocating liquid bridge. Langmuir 37, 11737–11749 (2021). https://doi.org/10.1021/acs.langmuir.1c01635CrossRef

15.

Krick, B.A., Vail, J.R., Persson, B.N.J., Sawyer, W.G.: Optical in situ micro tribometer for analysis of real contact area for contact mechanics, adhesion, and sliding experiments. Tribol. Lett. 45, 185–194 (2012)CrossRef

16.

Scherge, M., Sarembe, S., Kiesow, A., Petzold, M.: Dental tribology at the microscale. Wear 297, 1040–1044 (2013). https://doi.org/10.1016/j.wear.2012.11.066CrossRef

17.

Roba, M., Duncan, E.G., Hill, G.A., Spencer, N.D., Tosatti, S.G.P.: Friction measurements on contact lenses in their operating environment. Tribol. Lett. 44, 387–397 (2011). https://doi.org/10.1007/s11249-011-9856-9CrossRef

18.

Nevshupa, R.A., Scherge, M., Ahmed, S.I.-U.: Transitional microfriction behavior of silicon induced by spontaneous water adsorption. Surf. Sci. 517, 17–28 (2002). https://doi.org/10.1016/S0039-6028(02)02067-8CrossRef

19.

Stoyanov, P., Schneider, J., Rinke, M., Ulrich, S., Nold, E., Dienwiebel, M., Stüber, M.: Microstructure, mechanical properties and friction behavior of magnetron-sputtered V-C coatings. Surf. Coat. Technol. 321, 366–377 (2017). https://doi.org/10.1016/j.surfcoat.2017.04.050CrossRef

20.

Stoyanov, P., Chromik, R.: Scaling effects on materials tribology: from macro to micro scale. Materials 10, 550 (2017). https://doi.org/10.3390/ma10050550CrossRef

21.

Schmitz, T.L., Action, J.E., Ziegert, J.C., Sawyer, W.G.: The difficulty of measuring low friction: uncertainty analysis for friction coefficient measurements. J. Tribol. 127, 673–678 (2005). https://doi.org/10.1115/1.1843853CrossRef

22.

Khare, H.S., Burris, D.L.: Surface and subsurface contributions of oxidation and moisture to room temperature friction of molybdenum disulfide. Tribol. Lett. 53, 329–336 (2014). https://doi.org/10.1007/s11249-013-0273-0CrossRef

23.

Ye, J., Khare, H.S., Burris, D.L.: Transfer film evolution and its role in promoting ultra-low wear of a PTFE nanocomposite. Wear 297, 1095–1102 (2013). https://doi.org/10.1016/j.wear.2012.12.002CrossRef

24.

Urueña, J.M., McGhee, E.O., Angelini, T.E., Dowson, D., Sawyer, W.G., Pitenis, A.A.: Normal load scaling of friction in gemini hydrogels. Biotribology 13, 30–35 (2018). https://doi.org/10.1016/j.biotri.2018.01.002CrossRef

25.

Chen, R., Ye, J., Zhang, W., Wei, J., Zhang, Y., Liu, K.: Relationship between the real contact behavior and tribological characteristics of cotton fabric. Friction (2020). https://doi.org/10.1007/s40544-020-0398-8CrossRef

26.

Khare, H.S., Burris, D.L.: The effects of environmental water and oxygen on the temperature-dependent friction of sputtered molybdenum disulfide. Tribol. Lett. 52, 485–493 (2013). https://doi.org/10.1007/s11249-013-0233-8CrossRef

27.

Hoffmann, Á., Jungk, T., Soergel, E.: Cross-talk correction in atomic force microscopy. Rev. Sci. Instrum. 78, 016101 (2007). https://doi.org/10.1063/1.2424448CrossRef

28.

Onal, C.D., Sümer, B., Sitti, M.: Cross-talk compensation in atomic force microscopy. Rev. Sci. Instrum. 79, 103706 (2008). https://doi.org/10.1063/1.3002483CrossRef

29.

Ogletree, D.F., Carpick, R.W., Salmeron, M.: Calibration of frictional forces in atomic force microscopy. Rev. Sci. Instrum. 67, 3298–3306 (1996). https://doi.org/10.1063/1.1147411CrossRef

30.

Khare, H.S., Burris, D.L.: The extended wedge method: atomic force microscope friction calibration for improved tolerance to instrument misalignments, tip offset, and blunt probes. Rev. Sci. Instrum. 84, 055108 (2013). https://doi.org/10.1063/1.4804163CrossRef

31.

Li, Q., Kim, K.-S., Rydberg, A.: Lateral force calibration of an atomic force microscope with a diamagnetic levitation spring system. Rev. Sci. Instrum. 77, 065105 (2006). https://doi.org/10.1063/1.2209953CrossRef

32.

Burris, D.L., Bhattacharjee, A., Garabedian, N.T., Evans, C.L.: Traceable lateral force calibration (TLFC) for atomic force microscopy. Tribol. Lett. 68, 111 (2020). https://doi.org/10.1007/s11249-020-01349-yCrossRef

33.

Gee, M.G., Nunn, J.W., Muniz-Piniella, A., Orkney, L.P.: Micro-tribology experiments on engineering coatings. Wear 271, 2673–2680 (2011). https://doi.org/10.1016/j.wear.2011.02.031CrossRef

Titel: Dead Weight Microtribometer Calibration for Improved Tolerance to Transducer Crosstalk and Cantilever Torsion
verfasst von: Qingrui Song
Kun Liu
Wei Sun
Jiaxin Ye
Publikationsdatum: 01.06.2022
Verlag: Springer US
Erschienen in: Tribology Letters / Ausgabe 2/2022
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-022-01592-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Graphical Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2022

A Tribometric Device for the Rolling Contact of Soft Elastomers

High Wear Resistance of Ultralow-Wear Polyethylene with Different Molecular Weights Under Different Contact Pressure

Effect of Counter Material on Tribological Properties of CoCrMoSi Alloy

Influence of Natural Serpentine on Tribological Performance of Phosphate Bonded Solid Coatings

Height-Averaged Navier–Stokes Solver for Hydrodynamic Lubrication

Transient Evolution of Rheological Properties of Dense Granular Inertial Flow Under Plane Shear

Premium Partner

Marktübersichten