nach oben

Tribology Letters

Erschienen in:

01.06.2022 | Original Paper

Effect of Counter Material on Tribological Properties of CoCrMoSi Alloy

verfasst von: Ngoc-Phat Huynh, Koo-Hyun Chung

Erschienen in: Tribology Letters | Ausgabe 2/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Cobalt–chromium–molybdenum–silicon (CoCrMoSi) alloys have been employed in mechanical components for harsh operating conditions. The tribological properties of CoCrMoSi alloy were examined against CoCr alloy, low alloy steel, and high-chromium cast iron (HCCI). The CoCrMoSi alloy exhibited improved tribological performance when slid against CoCr alloy than against low alloy steel or HCCI. Mild and severe adhesive wear was identified as the main wear mechanism of the CoCrMoSi alloy against CoCr alloy and low alloy steel, respectively, associated with the role of tribo-film at the contact interface. Signs of mild abrasive wear were observed against HCCI. These results may lead to a better understanding of the tribological properties of CoCrMoSi alloys, thus contributing to their optimal use as wear-resistant materials.

Graphical Abstract

Vorheriger Artikel Transient Evolution of Rheological Properties of Dense Granular Inertial Flow Under Plane Shear

Nächster Artikel Influence of Natural Serpentine on Tribological Performance of Phosphate Bonded Solid Coatings

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Schmidt, R.D., Ferriss, D.P.: New materials resistant to wear and corrosion to 1000°C. Wear 32, 279–289 (1975). https://doi.org/10.1016/0043-1648(75)90316-6CrossRef

Halstead, A., Rawlings, R.D.: Structure and hardness of Co–Mo–Cr–Si wear resistant alloys (Tribaloys). Metal Sci. 18, 491–500 (2013). https://doi.org/10.1179/030634584790253146CrossRef

Navas, C., Cadenas, M., Cuetos, J.M., de Damborenea, J.: Microstructure and sliding wear behaviour of Tribaloy T-800 coatings deposited by laser cladding. Wear 260, 838–846 (2006). https://doi.org/10.1016/j.wear.2005.04.020CrossRef

do Nascimento, E.M., do Amaral, L.M., D’Oliveira, A.S.C.M.: Characterization and wear of oxides formed on CoCrMoSi alloy coatings. Surf. Coat. Technol. 332, 408–413 (2017). https://doi.org/10.1016/j.surfcoat.2017.07.081CrossRef

Renz, A., Prakash, B., Hardell, J., Lehmann, O.: High-temperature sliding wear behaviour of Stellite (R) 12 and Tribaloy (R) T400. Wear 402, 148–159 (2018). https://doi.org/10.1016/j.wear.2018.02.013CrossRef

Yao, M.X., Wu, J.B.C., Liu, R.: Microstructural characteristics and corrosion resistance in molten Zn–Al bath of Co–Mo–Cr–Si alloys. Mater. Sci. Eng. 407, 299–305 (2005). https://doi.org/10.1016/j.msea.2005.07.054CrossRef

Yao, M.X., Wu, J.B.C., Yick, S., Xie, Y., Liu, R.: High temperature wear and corrosion resistance of a Laves phase strengthened Co–Mo–Cr–Si alloy. Mater. Sci. Eng. 435–436, 78–83 (2006). https://doi.org/10.1016/j.msea.2006.07.054CrossRef

Wang, Y.S., Narasimhan, S., Larson, J.M., Schaefer, S.K.: Wear and wear mechanism simulation of heavy-duty engine intake valve and seat inserts. J Mater Eng Perform 7, 53–65 (1998). https://doi.org/10.1361/105994998770348043CrossRef

International Maritime Organization Committee: Imo 2020: Consistent Implementation of MARPOL Annex VI. International Maritime Organization, London (2019)

10.

Forsberg, P., Hollman, P., Jacobson, S.: Wear mechanism study of exhaust valve system in modern heavy duty combustion engines. Wear 271, 2477–2484 (2011). https://doi.org/10.1016/j.wear.2010.11.039CrossRef

11.

Archard, J.F.: Contact and rubbing of flat surfaces. J. Appl. Phys. 24, 981–988 (1953). https://doi.org/10.1063/1.1721448CrossRef

12.

Yao, M.X., Wu, J.B.C., Xie, Y.: Wear, corrosion and cracking resistance of some W- or Mo-containing stellite hardfacing alloys. Mater. Sci. Eng. 407, 234–244 (2005). https://doi.org/10.1016/j.msea.2005.06.062CrossRef

13.

Choo, S.-H., Lee, S., Golkovski, M.G.: Effects of accelerated electron beam irradiation on surface hardening and fatigue properties in an AISI 4140 steel used for automotive crankshaft. Mater. Sci. Eng. 293, 56–70 (2000). https://doi.org/10.1016/S0921-5093(00)01207-7CrossRef

14.

Tabrett, C.P., Sare, I.R.: Effect of high temperature and sub-ambient treatments on the matrix structure and abrasion resistance of a high-chromium white iron. Scripta Mater. 38, 1747–1753 (1998). https://doi.org/10.1016/S1359-6462(98)00118-3CrossRef

15.

Abd El-Aziz, K., Zohdy, K., Saber, D., Sallam, H.E.M.: Wear and corrosion behavior of high-Cr white cast iron alloys in different corrosive media. J. Bio Tribo Corros. 1, 25 (2015). https://doi.org/10.1007/s40735-015-0026-8CrossRef

16.

Hertz, H.: On the contact of elastic solids. J. Reine Angew. Math. 92, 156–171 (1881).

17.

Cho, H.-R., Kim, J.-S., Chung, K.-H.: Microstructure, mechanical, and tribological properties of pressureless sintered and spark plasma sintered FeTiB2 nanocomposites. Tribol. Int. 131, 83–93 (2019). https://doi.org/10.1016/j.triboint.2018.10.016CrossRef

18.

Martinez-Nogues, V., Nesbitt, J.M., Wood, R.J.K., Cook, R.B.: Nano-scale wear characterization of CoCrMo biomedical alloys. Tribol. Int. 93, 563–572 (2016). https://doi.org/10.1016/j.triboint.2015.03.037CrossRef

19.

Quiram, G., Gindri, I.M., Kerwell, S., Shull, K., Mathew, M.T., Rodrigues, D.C.: Nanoscale mechanical evaluation of electrochemically generated tribolayer on CoCrMo alloy for hip joint application. J. Bio Tribo Corros. 2, 15 (2016). https://doi.org/10.1007/s40735-016-0045-0CrossRef

20.

Chung, K.-H., Lee, Y.-H., Kim, Y.-T., Kim, D.-E., Yoo, J., Hong, S.: Nano-tribological characteristics of PZT thin film investigated by atomic force microscopy. Surf. Coat. Technol. 201, 7983–7991 (2007). https://doi.org/10.1016/j.surfcoat.2007.03.044CrossRef

21.

Kim, H.-J., Nguyen, G.H., Ky, D.L.C., Tran, D.K., Jeon, K.-J., Chung, K.-H.: Static and kinetic friction characteristics of nanowire on different substrates. Appl. Surf. Sci. 379, 452–461 (2016). https://doi.org/10.1016/j.apsusc.2016.04.097CrossRef

22.

Rabinowicz, E.: Friction and Wear of Materials, 2nd edn. Wiley, New York (1995)

23.

Mary, C., Fouvry, S., Martin, J.M., Bonnet, B.: Pressure and temperature effects on Fretting Wear damage of a Cu–Ni–In plasma coating versus Ti17 titanium alloy contact. Wear 272, 18–37 (2011). https://doi.org/10.1016/j.wear.2011.06.008CrossRef

24.

Pouranvari, M.: On the weldability of grey cast iron using nickel based filler metal. Mater. Des. 31, 3253–3258 (2010). https://doi.org/10.1016/j.matdes.2010.02.034CrossRef

25.

Yamamoto, S.: Arc Welding of Specific Steels and Cast Irons, pp. 4–18. Kobe Steel Ltd, Tokyo (2008)

26.

Chung, R.J., Tang, X., Li, D.Y., Hinckley, B., Dolman, K.: Effects of titanium addition on microstructure and wear resistance of hypereutectic high chromium cast iron Fe–25wt.%Cr–4wt.%C. Wear 267, 356–361 (2009). https://doi.org/10.1016/j.wear.2008.12.061CrossRef

27.

Stevenson, A.N.J., Hutchings, I.M.: Wear of hardfacing white cast irons by solid particle erosion. Wear 186–187, 150–158 (1995). https://doi.org/10.1016/0043-1648(95)07184-9CrossRef

28.

Liu, H., Pei, Y., Xie, D., Deng, X., Leng, Y.X., Jin, Y., et al.: Surface modification of ultra-high molecular weight polyethylene (UHMWPE) by argon plasma. Appl. Surf. Sci. 256, 3941–3945 (2010). https://doi.org/10.1016/j.apsusc.2010.01.054CrossRef

Titel: Effect of Counter Material on Tribological Properties of CoCrMoSi Alloy
verfasst von: Ngoc-Phat Huynh
Koo-Hyun Chung
Publikationsdatum: 01.06.2022
Verlag: Springer US
Erschienen in: Tribology Letters / Ausgabe 2/2022
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-022-01579-2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Graphical Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2022

Borophene: Provides the Possibility to Observe the Behavior of a Negative Friction Coefficient in a Rigid Interface

Adjusting for Running-in: Extension of the Archard Wear Equation

Transient Evolution of Rheological Properties of Dense Granular Inertial Flow Under Plane Shear

Influence of Natural Serpentine on Tribological Performance of Phosphate Bonded Solid Coatings

Enhancement of a Tribometer Device Dedicated to Quasi-Static Friction Conditions Under High Pressure

Review of Molecular Dynamics Simulations of Phosphonium Ionic Liquid Lubricants

Premium Partner

Marktübersichten