nach oben

Tribology Letters

Erschienen in:

01.06.2022 | Tribology Methods

Enhancement of a Tribometer Device Dedicated to Quasi-Static Friction Conditions Under High Pressure

verfasst von: R. Massion, C. Franoux, C. Dureau, J. Vincent, L. Faure, S. Philippon

Erschienen in: Tribology Letters | Ausgabe 2/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A new version of an original tribometer has been developed to measure friction coefficients under high pressures in quasi-static conditions. This study describes the design of the new tribometer device and aims to cancel any defects noted in the previous release. This configuration, combined with the improvement of the tribometer’s guidance stiffness, increases the sliding distance from 1 to 30 mm while keeping a normal pressure accuracy and creates possible pressure tests ranging from 500 to 2000 MPa. In order to validate the assembly and to simulate testing conditions in severe plastic deformation processes of metals, two tribo-pairs consisting of interstitial free steels and aluminum alloy (Al 1050) samples sliding on 45NiCrMo16 steel matrices were tested. New results on the friction coefficient evolution throughout a sliding length of 10 mm were noted and all tests revealed good reproducibility for the whole pressure range.

Vorheriger Artikel Evaluation of Wear Measurement with Radioactive Isotopes for DLC Coatings Affected by Abrasive Particles

Nächster Artikel Ice Deformation Explains Curling Stone Trajectories

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Lim, S.C., Ashby, M.F., Brunton, J.H.: The effects of sliding conditions on the dry friction of metals. Acta Metall. 37, 767–772 (1989). https://doi.org/10.1016/0001-6160(89)90003-5CrossRef

Tamai, Y., Inazumi, T., Manabe, K.: Journal of Materials Processing Technology FE forming analysis with nonlinear friction coefficient model considering contact pressure, sliding velocity and sliding length. J. Mater. Process. Tech. 227, 161–168 (2016). https://doi.org/10.1016/j.jmatprotec.2015.08.023CrossRef

Li, W.L., Tao, N.R., Han, Z., Lu, K.: Comparisons of dry sliding tribological behaviors between coarse-grained and nanocrystalline copper. Wear 274–275, 306–312 (2012). https://doi.org/10.1016/j.wear.2011.09.010CrossRef

Ibrahim, M., El, A., Kim, H.S.: Tribology International Effect of the fabrication method on the wear properties of copper silicon carbide composites. Tribiol. Int. 128, 140–154 (2018). https://doi.org/10.1016/j.triboint.2018.07.024CrossRef

Ibrahim, M., El, A., Seop, H.: Wear properties of high pressure torsion processed ultrafine grained Al–7 % Si alloy. Mater. Des. 53, 373–382 (2014). https://doi.org/10.1016/j.matdes.2013.07.045CrossRef

Chegini, M., Hossein, M.: Materials Characterization Effect of equal channel angular pressing on the mechanical and tribological behavior of Al–Zn–Mg–Cu alloy. Mater. Charact. 140, 147–161 (2018). https://doi.org/10.1016/j.matchar.2018.03.045CrossRef

Ibrahim, M., El, A., El, N., Shehata, F.A., Abd, M., Hameed, E., et al.: Wear properties of ECAP-processed ultrafine grained Al–Cu alloys. Mater. Sci. Eng. A 527, 3726–3732 (2010). https://doi.org/10.1016/j.msea.2010.03.057CrossRef

Edalati, K., Horita, Z.: Materials Science & Engineering A Review article A review on high-pressure torsion (HPT) from 1935 to 1988. Mater. Sci. Eng. A 652, 325–352 (2016). https://doi.org/10.1016/j.msea.2015.11.074CrossRef

Kamrani, M., Levitas, V.I., Feng, B.: Materials Science & Engineering A FEM simulation of large deformation of copper in the quasi-constrain high-pressure-torsion setup. Mater. Sci. Eng. A 705, 219–230 (2017). https://doi.org/10.1016/j.msea.2017.08.078CrossRef

10.

Zhilyaev, A.P.: Orientation imaging microscopy of ultrafine-grained nickel. Scr. Mater. 46, 575–580 (2002)CrossRef

11.

Lanjewar, H., Kestens, L.A.I., Verleysen, P.: Damage and strengthening mechanisms in severely deformed commercially pure aluminum: experiments and modeling. Mater. Sci. Eng. A 800, 140224 (2021). https://doi.org/10.1016/j.msea.2020.140224CrossRef

12.

Verleysen, P., Lanjewar, H.: Dynamic high pressure torsion: a novel technique for dynamic severe plastic deformation. J. Mater. Process. Technol. 276, 116393 (2020). https://doi.org/10.1016/j.jmatprotec.2019.116393CrossRef

13.

Deng, G.Y., Lu, C., Tieu, A.K., Su, L.H., Huynh, N.N., Liu, X.H.: Crystal plasticity investigation of friction effect on texture evolution of Al single crystal during ECAP. J. Mater. Sci. 45, 4711–4717 (2010). https://doi.org/10.1007/s10853-010-4674-2CrossRef

14.

Kumar, P., Panda, S.S.: Numerical simulation of Al1070 alloy through hybrid SPD process. Int. J. Adv. Manuf. Technol. (2016). https://doi.org/10.1007/s00170-016-9768-9CrossRef

15.

Forquin, P.: An experimental method of measuring the confined compression strength of geomaterials. Int. J. Solids Struct. 44, 4291–4317 (2007). https://doi.org/10.1016/j.ijsolstr.2006.11.022CrossRef

16.

Karinski, Y.S., Yankelevsky, D.Z., Zhutovsky, S., Feldgun, V.R.: Uniaxial confined compression tests of cementitious materials. Constr. Build. Mater. 153, 247–260 (2017). https://doi.org/10.1016/j.conbuildmat.2017.07.010CrossRef

17.

Durand, B., Delvare, F., Bailly, P., Picart, D.: International Journal of Solids and Structures Identification of the friction under high pressure between an aggregate material and steel: experimental and modelling aspects. Int. J. Solids Struct. 50, 4108–4117 (2013). https://doi.org/10.1016/j.ijsolstr.2013.08.021CrossRef

18.

Lai, X., Xia, Y., Wu, X., Zhou, Q.: An experimental method for characterizing friction properties of sheet metal under high contact pressure. Wear 289, 82–94 (2012). https://doi.org/10.1016/j.wear.2012.04.011CrossRef

19.

Pougis, A., Philippon, S., Massion, R., Faure, L., Fundenberger, J.J., Toth, L.S.: Dry friction of steel under high pressure in quasi-static conditions. Tribol. Int. 67, 27–35 (2013). https://doi.org/10.1016/j.triboint.2013.06.018CrossRef

Titel: Enhancement of a Tribometer Device Dedicated to Quasi-Static Friction Conditions Under High Pressure
verfasst von: R. Massion
C. Franoux
C. Dureau
J. Vincent
L. Faure
S. Philippon
Publikationsdatum: 01.06.2022
Verlag: Springer US
Erschienen in: Tribology Letters / Ausgabe 2/2022
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-022-01596-1

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2022

Simulating the Misting of Lubricant in the Piston Assembly of an Automotive Gasoline Engine: The Effect of Viscosity Modifiers and Other Key Lubricant Components

Investigating the Influence of Friction and Material Wear on Triboelectric Charge Transfer in Metal–Polymer Contacts

Tunability of Recording Head Protrusion by Use of Embedded Dual Heaters

Correction to: On the Gravity-Driven Sliding Motion of a Planar Board on a Tilted Soft Porous Layer

Influences of Boundary Slip Coating on Elastohydrodynamically Lubricated Contacts

Transient Evolution of Rheological Properties of Dense Granular Inertial Flow Under Plane Shear

Premium Partner

Marktübersichten