nach oben

Journal of Materials Engineering and Performance

Erschienen in:

05.01.2021

Experimental Study on the Forming Limit of GH605 Superalloy Sheet Using Digital Image Correlation

verfasst von: Yanju Wang, Aixue Sha, Xingwu Li, Chonglin Jia, Wenfeng Hao

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 2/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this work, the forming limit of GH605 superalloy was determined by using digital image correlation analysis to monitor the strain evolution during this process. First, tensile experiments were conducted to determine the material constants of three different types of GH605 superalloys. Then, the Holmberg and Marciniak methods of forming limit tests were compared, and the complete forming limit diagram was obtained by combining the results from 6 specimens. Finally, the factors affecting the forming limit were analyzed, and the forming limit diagrams (FLD) of three different types of GH605 superalloys were obtained. The results showed that the forming limit curve of GH605 sheet and strip showed a typical ‘V’ shape, and the minimum forming limit appeared near the plane strain. The FLD of GH605 sheet was also obtained in this work, which is of great significance to numerical simulations of sheet metals and the formulation of process parameters.

Vorheriger Artikel Surface Modification of AISI 304 Stainless Steel with NiBSi-SiC Composite by TIG Method

Nächster Artikel Fabrication, Characterization, and Corrosion Behavior of a New Cu40Mn25Al20Fe5Co5Ni5 High-Entropy Alloy in HNO3 Solution

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Q. Zhu, C. Wang, K. Yang, G. Chen, H. Qin, and P. Zhang, Plastic Deformation Behavior of a Nickel-Based Superalloy on the Mesoscopic Scale, J. Mater. Sci. Technol., 2020, 40, p 146-157CrossRef

J. Xu, H. Gruber, R. Boyd, S. Jiang, R.L. Peng, and J.J. Moverare, On the Strengthening and Embrittlement Mechanisms of an Additively Manufactured Nickel-Base Superalloy, Materialia., 2020, 10, p 100657CrossRef

G. Xiao, J. Jiang, Y. Wang, Y. Liu, and Y. Zhang, Microstructure and Mechanical Properties of Nickel-Based Superalloy GH4037 Parts Formed by Thixoforming, Mater. Sci. Eng., A, 2020, 780, p 139196CrossRef

M. Wang, C. Sun, M.W. Fu, Z. Liu, and C. Wang, Microstructure and Microtexture Evolution of Dynamic Recrystallization during Hot Deformation of a Nickel-Based Superalloy, Mater. Design., 2020, 188, p 108429CrossRef

Y. Lei, X. Li, R. Sun, Y. Tang, and W. Niu, Effect of Sintering Temperature and Heat Treatment on Microstructure and Properties of Nickel-Based Superalloy, J. Alloy. Compd., 2020, 818, p 152882CrossRef

Y. Ge, Z. Zhu, and Y. Zhu, Electrochemical Deep Grinding of Cast Nickel-Base Superalloys, J. Manuf. Process., 2019, 47, p 291-296CrossRef

N. Park, H. Huh, S.J. Lim, Y. Lou, Y.S. Kang, and M.H. Seo, Fracture-Based Forming Limit Criteria for Anisotropic Materials in Sheet Metal Forming, Int. J. Plasticity, 2017, 96, p 1-35CrossRef

R. Safdarian, Stress Based Forming Limit Diagram for Formability Characterization of 6061 Aluminum, T. Nonferr. Metal. Soc., 2016, 26, p 2433-2441CrossRef

A. Kami, B.M. Dariani, V.A. Sadough, D.S. Comsa, and D. Banabic, Numerical Determination of the Forming Limit Curves of Anisotropic Sheet Metals Using GTN Damage Model, J. Mater. Process Tech., 2015, 216, p 472-483CrossRef

10.

K. Hariharan, N. Nguren, F. Barlat, M. Lee, and J.H. Kim, A Pragmatic Approach to Accommodate In-Plane Anisotropy in Forming Limit Diagrams, Mech. Res. Commun., 2014, 62, p 5-17CrossRef

11.

R. Chiba, Reliability Analysis of Forming Limits of Anisotropic Metal Sheets with Uncertain Material Properties, Comp. Mater. Sci., 2013, 69, p 113-120CrossRef

12.

X. Li, H. Dong, H. Wang, G. Guo, and D. Li, Effect of Strain Rate Difference Between Inside and Outside Groove in M − K Model on Prediction of Forming Limit Curve of Ti6Al4 V at Elevated Temperatures, T. Nonferr. Metal. Soc., 2020, 30, p 405-416CrossRef

13.

H. Zhu, Z. He, Y. Lin, K. Zheng, X. Fan, and S. Yuan, The Development of a Novel Forming Limit Diagram under Nonlinear Loading Paths in Tube Hydroforming, Int. J. Mech. Sci., 2020, 172, p 105392CrossRef

14.

L. Mu, Z. Jia, Z. Ma, F. Shen, Y. Sun, and Y. Zang, A Theoretical Prediction Framework for the Construction of a Fracture Forming Limit Curve Accounting for Fracture Pattern Transition, Int. J. Plasticity, 2020, 129, p 102706CrossRef

15.

J.P. Magrinho, G. Centeno, M.B. Silva, C. Vallellano, and P.A.F. Martins, On the Formability Limits of Thin-Walled Tube Inversion Using Different Die Fillet Radii, Thin. Wall. Struct., 2019, 144, p 106328CrossRef

16.

S.M.M. Nasiri, A. Basti, R. Hashemi, and A. Darvizeh, Effects of Normal and through-Thickness Shear Stresses on the Forming Limit Curves of AA3104-H19 Using Advanced Yield Criteria, Int. J. Mech. Sci., 2018, 137, p 15-23CrossRef

17.

K. Toshniwal, S. Pareddy, N. Kotkunde, and A.K. Gupta, Numerical Investigation on Stress based Forming Limit Diagram for Ti–6Al–4V Alloy, Mater. Today: Proc., 2017, 4, p 8096-8103

18.

J. Zhou, Y. Mu, and B. Wang, A Damage-Coupled Unified Viscoplastic Constitutive Model for Prediction of Forming Limits of 22MnB5 at High Temperatures, Int. J. Mech. Sci., 2017, 133, p 457-468CrossRef

19.

International Standard ISO 12004-2. Metallic Materials-Sheet and Strip -Determination of Forming-limit Curves - Part 2: Determination of Forming Limit Curves in the Laboratory (2008).

20.

L. Montanari, V.A. Cristino, M.B. Silva, and P.A.F. Martins, A New Approach for Deformation History of Material Elements in Hole-Flanging Produced by Single Point Incremental Forming, Int. J. Adv. Manuf. Technol., 2013, 69, p 1175-1183CrossRef

21.

X. Song, L. Leotoing, D. Gunines, and E. Ragneau, Investigation of the Forming Limit Strains at Fracture of AA5086 Sheets Using an In-Plane Biaxial Tensile Test, Eng. Fract. Mech., 2016, 163, p 130-140CrossRef

22.

K. Isik, M.B. Silva, A.E. Tekkaya, and P.A.F. Martins, Formability Limits by Fracture in Sheet Metal Forming, J. Mater. Process Tech., 2014, 214, p 1557-1565CrossRef

23.

H. Gedikli, Ö.N. Cora, and M. Koç, Comparative Investigations on Numerical Modeling for Warm Hydroforming of AA5754-O Aluminum Sheet Alloy, Mater. Design., 2011, 32, p 2650-2662CrossRef

24.

B. Meng, J. Shi, Y. Zhang, C. Cheng, B. Ma, and M. Wan, Feasibility Evaluation of Failure Models for Predicting Forming Limit of Metal Foils, Chinese J. Aeronaut., 2020, 33, p 2461-2471CrossRef

25.

Z.T. Xu, L.F. Peng, M.W. Fu, and X.M. Lai, Size Effect Affected Formability of Sheet Metals in Micro/Meso Scale Plastic Deformation: Experiment and Modeling, Int. J. Plasticity, 2015, 68, p 34-54CrossRef

26.

S. Holmberg, B. Enquist, and P. Thilderkvist, Evaluation of Sheet Metal Formability by Tensile Tests, J. Mater. Process Tech., 2004, 145, p 72-83CrossRef

Titel: Experimental Study on the Forming Limit of GH605 Superalloy Sheet Using Digital Image Correlation
verfasst von: Yanju Wang
Aixue Sha
Xingwu Li
Chonglin Jia
Wenfeng Hao
Publikationsdatum: 05.01.2021
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 2/2021
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-020-05388-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2021

Effect of Subcritical Annealing on the Microstructure and Mechanical Properties of a Precipitation-Hardened Al-Zn-Mg-Cu Alloy

Fracture Characterization of Base Metal, Seam Weld, and Girth Weld of Welded Line Pipe Steel at Room and Low Temperatures

Structural Evolution and Mechanical and Magnetic Properties of Nonequiatomic CoFe2NiMn0.3Alx (0.25 ≤ x ≤ 1.00) High-Entropy Alloys

Improved Fracture Toughness and Crack Arrest Ability of Graphene–Alumina Nanocomposite

Investigation of Building Orientation and Aging on Strength–Stiffness Performance of Additively Manufactured Maraging Steel

Characterization and Corrosion Behavior Evaluation of Nanostructured TiO2 and Al2O3-13 wt.%TiO2 Coatings on Aluminum Alloy Prepared via High-Velocity Oxy-Fuel Spray

Premium Partner

Marktübersichten