nach oben

Journal of Materials Engineering and Performance

Erschienen in:

08.01.2021

Surface Modification of AISI 304 Stainless Steel with NiBSi-SiC Composite by TIG Method

verfasst von: Musa Kilic, Anil Imak, Ihsan Kirik

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 2/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The aim of this study was to investigate the properties of TIG coatings of AISI 304 steel with SiC-reinforced NiBSi and NiBSi/SiC-X metal matrix at different rate, as well as the effect of SiC reinforcement rate on microstructure, microhardness, and wear properties of the coating layer. After the coating process, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and x-ray diffraction technique (XRD) were conducted in order to determine microstructure, chemical composition, and phases. Microhardness and wear tests were carried out to determine wear mechanism of the coating layer, and wear surfaces were also characterized by SEM and EDS. The results showed that enhanced microhardness could be achieved with SiC reinforcement and microphotograph of microstructure showed a dendritic structure with dissolved SiC particles. Moreover, coatings of AISI 304 with SiC and NiBSi/SiC presented an excellent hardness and wear resistance.

Vorheriger Artikel Wear Performance and Nanomechanical Behavior of Sonoelectroplated Cu-Graphene Nanocomposite Thin Films

Nächster Artikel Experimental Study on the Forming Limit of GH605 Superalloy Sheet Using Digital Image Correlation

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

B. Lotfi, M. Rostami, and Z. Sadeghian, Effect of Silicon Content on Microstructure of Al-Si/SiCp Composite Layer Cladded on A380 Al Alloy by TIG Welding Process, Trans. Nonferrous Met. Soc., 2014, 24, p 2824–2830CrossRef

F. Weng, H. Yu, C. Chen, and J. Dai, Microstructures and Wear properties of Laser Cladding Co-Based Composite Coatings on Ti-6Al-4V, Mater. Des., 2015, 80, p 174–181CrossRef

M. Qunshuang, L. Yajiang, and W. Juan, Effects of Ti Addition on Microstructure Homogenization and Wear Resistance of Wide-Band Laser Clad Ni60/WC Composite Coatings, Int. J. Refract. Metal. Hard Mater., 2017, 64, p 225–233CrossRef

G.R. Mirshekari, S. Daee, S. FatourehBonabi, M.R. Tavakoli, A. Shafyei, and M. Safaei, Effect of Interlayers on the Microstructure and Wear Resistance of Stellite 6 Coatings Deposited on AISI, 420 Stainless Steel by GTAW Technique, Surf. Interfaces, 2017, 9, p 79–92CrossRef

S. Saroj, C.K. Sahoo, D. Tijo, K. Kumar, and M. Masanta, Sliding Abrasive Wear Characteristic of TIG Cladded TiC Reinforced Inconel825 Composite Coating, Int. J. Refract. Metal. Hard Mater., 2017, 69, p 119–130CrossRef

S. Buytoz, M. Ulutan, S. Islak, B. Kurt, and O.N. Celik, Microstructural and Wear Characteristics of High Velocity Oxygen Fuel (HVOF) Sprayed NiCrBSi–SiC Composite Coating on SAE 1030 Steel, Arab. J. Sci. Eng., 2013, 38, p 1481–1491CrossRef

L. Liu, H. Xu, J. Xiao, X. Wei, G. Zhang, and C. Zhang, Effect of Heat Treatment on Structure and Property Evolutions of Atmospheric Plasma Sprayed NiCrBSi Coatings, Surf. Coat. Technol., 2017, 325, p 548–554CrossRef

I.C. Grigorescu, C. Di Rauso, R. Drira-Halouani, B. Lavelle, R. Giampaolo, and J.S. Lira, Phase Characterization in Ni Alloy-Hard Carbide Composites for Fused Coatings, Surf. Coat. Technol., 1995, 76–77, p 494–498CrossRef

P. Sheppard and H. Koiprasert, Effect of W Dissolution in NiCrBSi-WC and NiBSi-WC Arc Sprayed Coatings on Wear Behaviors, Wear, 2014, 317, p 194–200CrossRef

10.

Z.Q. Zhang, H.D. Wang, B.S. Xu, and G.S. Zhang, Characterization of Microstructure and Rolling Contact Fatigue Performance of NiCrBSi/WC–Ni Composite Coatings Prepared by Plasma Spraying, Surf. Coat. Technol., 2015, 261, p 60–68CrossRef

11.

L.Y. Chen, T. Xu, H. Wang, P. Sang, S. Lu, Z.X. Wang, S. Chen, and L.C. Zhang, Phase Interaction Induced Texture in a Plasma Sprayed-Remelted NiCrBSi Coating During Solidification: An Electron Backscatter Diffraction Study, Surf. Coat. Technol., 2019, 358, p 467–480CrossRef

12.

R. Rachidi, B.E. Kihel, and F. Delaunois, Microstructure and Mechanical Characterization of NiCrBSi Alloy and NiCrBSi-WC Composite Coatings Produced by Flame Spraying, Mater. Sci. Eng. B, 2019, 241, p 13–21CrossRef

13.

D. Kong and B. Zhao, Effects of Loads on Friction-Wear Properties of HVOF Sprayed NiCrBSi Alloy Coatings by Laser Re-Melting, J. Alloys Compd., 2017, 705, p 700–707CrossRef

14.

A. Zabihi and R. Soltani, Tribological Properties of B4C Reinforced Aluminum Composite Coating Produced by TIG Re-Melting of Flame Sprayed Al-Mg-B4C Powder, Surf. Coat. Technol., 2018, 349, p 707–718CrossRef

15.

M.A. Maleque, K.A. Bello, A.A. Adebisi, and A. Dube, Abrasive Wear Response of TIG-Melted TiC Composite Coating: Taguchi Approach, Mater. Sci. Eng., 2017, 184, p 1–6

16.

C.K. Sahoo and M. Masanta, Microstructure and Mechanical Properties of TiC-Ni Coating on AISI304 Steel Produced by TIG Cladding Process, J. Mater. Process. Technol., 2017, 240, p 126–137CrossRef

17.

F. Ghadami, M. HeydarzadehSohi, and S. Ghadami, Effect of TIG Surface Melting on Structure and Wear Properties of Air Plasma-Sprayed WC-Co Coatings, Surf. Coat. Technol., 2015, 261, p 108–113CrossRef

18.

A. Lanzutti, M. Lekka, C. de Leitenburg, and L. Fedrizzi, Effect of Pulse Current on Wear Behavior of Ni Matrix Micro and Nano-SiC Composite Coatings at Room and Elevated Temperature, Tribol. Int., 2019, 132, p 50–61CrossRef

19.

P. Wang, S. Li, C. Wei, W. Han, G. Wen, X. Geng, S. Li, H. Sun, and X. Li, Microstructure and Ablation Properties of SiC/ZrB2-SiC/ZrB2/SiC Multilayer Coating on Graphite, J. Alloys Compd., 2019, 781, p 26–36CrossRef

20.

R. Gawel, K. Kyzioł, Z. Jurasz, and Z. Grzesik, Oxidation Resistance of Valve Steels Covered With Thin SiC Coatings Obtained by RF CVD, Corros. Sci., 2018, 145, p 16–25CrossRef

21.

J.P. Riviere, J. Delafond, P. Misaelides, and F. Noli, Corrosion Protection of an AISI, 321 Stainless Steel by SIC Coatings, Surf. Coat. Technol., 1998, 100–101, p 243–246CrossRef

22.

S. Tailor, R.M. Mohantym, and P.R. Soni, A Review on Plasma Sprayed Al-SiC Composite Coatings, J. Mater. Sci. Surface Eng., 2013, 1(1), p 15–22

23.

S. Mridha, Titanium Nitride Layer Formation by TIG Surface Melting in a Reactive Environment, J. Mater. Proc. Tech., 2005, 168, p 471–477CrossRef

24.

P.H. Lailatula and M.A. Maleque, Surface Modification of Duplex Stainless Steel with SiC Preplacement Using TIG Torch Cladding, Proc. Eng., 2017, 184, p 737–742CrossRef

25.

K. Kilicay, S. Buytoz, and M. Ulutan, Microstructural and Tribological Properties of Induction Cladded NiCrBSi/WC Composite Coatings, Surf. Coat. Technol., 2020, 397, p 1–9CrossRef

26.

J. Zhang and S. Hou, Effects of CTCP Modification on Microstructure and Wear Behavior of CTCP-NiCrBSi/Heat Resistant Steel Composite Layer, Materials, 2018, 11, p 1–14

27.

S. Buytoz and M. Ulutan, In Situ Synthesis of Reinforced MMC Surface on AISI, 304 Stainless Steel by TIG Surface Alloying, Surf. Coat. Technol., 2006, 200, p 3698–3704CrossRef

28.

L.Y. Chen, T. Xu, S. Lu, Z.X. Wang, S. Chen, and L.C. Zhang, Improved Hardness and Wear Resistance of Plasma Sprayed Nanostructured NiCrBSi Coating Via Short-Time Heat Treatment, Surf. Coat. Technol., 2018, 350, p 436–444CrossRef

29.

Y.H. Celik and E. Kilickap, Hardness And Wear Behaviours of Al Matrix Composites and Hybrid Composites Reinforced with B4C and SiC, Powder Metall. Met. Ceram., 2019, 57, p 613–622CrossRef

30.

O.N. Celik, M. Ulutan, H. Gasan, Ü. Er, and S. Buytoz, Effects of Graphite Content on the Microstructure and Wear Properties of an AISI, 8620 Steel Surface Modified by Tungsten Inert Gas (TIG), Surf. Coat. Technol., 2011, 206, p 1423–1429CrossRef

31.

S. Islak, Ö. Eski, and S. Buytoz, Microstructure and Wear Properties of FeW-SiC Based Composite Coating Produced with Tungsten Inert Gas (TIG) Surfacing Method, Optoelectron. Adv. Mater. Rapid Commun., 2011, 5(6), p 665–672

32.

Y.H. Celik and K. Secilmis, Investigation of Wear Behaviours of Al Matrix Composites Reinforced with Different B4C Rate Produced by Powder Metallurgy Method, Adv. Powder Technol., 2017, 28, p 2218–2224CrossRef

33.

L. Thijs, M.L.M. Sistiaga, R. Wauthle, Q. Xie, J.P. Kruth, and J. Van Humbeeck, Strong Morphological and Crystallographic Texture and Resulting Yield Strength Anisotropy in Selective Laser Melted Tantalum, Acta Mater., 2013, 61(12), p 4657–4668CrossRef

34.

Y. Lyu, Y. Sun, and Y. Yang, Non-Vacuum Sintering Process of WC/W2C Reinforced Ni-Based Coating on Steel, Met. Mater. Int., 2016, 22(2), p 311–318CrossRef

35.

S. Zhou, Y. Huang, X. Zeng, and Q. Hu, Microstructure Characteristics of Ni-Based WC Composite Coatings by Laser Induction Hybrid Rapid Cladding, Mater. Sci. Eng. A, 2008, 480, p 564–572CrossRef

36.

S. Zhou, X. Zeng, Q. Hu, and Y. Huang, Analysis of Crack Behavior for Ni-Based WC Composite Coatings by Laser Cladding and Crack-Free Realization, Appl. Surf. Sci., 2008, 255(5), p 1646–1653CrossRef

37.

J. Qu, W. Xiong, D. Ye, Z. Yao, W. Liu, and S. Lin, Effect of WC Content on the Microstructure and Mechanical Properties of Ti(C05N05)-WC-Mo-Ni Cermets, Int. J. Refract. Met. Hard Mater., 2010, 28(2), p 243–249CrossRef

38.

M.R. Fernández, A. García, J.M. Cuetos, R. González, A. Noriega, and M. Cadenas, Effect of Actual WC Content on the Reciprocating Wear of a Laser Cladding NiCrBSi Alloy Reinforced with WC, Wear, 2015, 324–325, p 80–89CrossRef

39.

S.E. Saddow and A. Agarwal, Advances in Silicon Carbide Processing and Applications, Artech House Semiconductor Materials and Devices Library, 2004, p. 1–51.

40.

M. Türkoğlu and D. Hanbay, Plant Recognition System Based on Extreme Learning Machine by Using Shearlet Transform and New Geometric Features, J. Fac. Eng. Arch. Gazi Univ., 2019, 34(4), p 2097–2112

41.

D. Deschuyteneer, F. Petit, M. Gonon, and F. Cambier, Influence of Large Particle Size-up to 1.2 mm– and Morphology on Wear Resistance in NiCrBSi/WC Laser Cladded Composite Coatings, Surface Coat. Technol., 2017, 311, p 365–373CrossRef

Titel: Surface Modification of AISI 304 Stainless Steel with NiBSi-SiC Composite by TIG Method
verfasst von: Musa Kilic
Anil Imak
Ihsan Kirik
Publikationsdatum: 08.01.2021
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 2/2021
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-020-05378-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2021

Investigations into Enhanced Formability of AA5083 Aluminum Alloy Sheet in Single-Point Incremental Forming

Investigation of the Effect of Cryogenic Treatment Cubic Boron Nitride Turning Insert Tools

Relationship of Grain Size, Texture Distribution, and Mechanical Properties of 25Mn Casting Flange Blank Subjected to Hot Ring Rolling

Lamellar Pearlite as an Initial Microstructure for Austenite Reversion Treatment

Wear and Corrosion Resistance of a-C:H:SiOx Coating on Medical 316L Stainless Steel

Investigation of Building Orientation and Aging on Strength–Stiffness Performance of Additively Manufactured Maraging Steel

Premium Partner

Marktübersichten